Cisco vms 2.3 can't query to IDSM-2
Hi all,
I use Catalyst 6513 (Router IOS) + IDSM-2 and use Cisco VMS 2.3 to manage IDSM-2. I upgrade IDSM-2 from version 4 to version 5. However, after updating completely, I use Cisco VMS 2.3 to query to IDSM-2, I see a error:
"status: Error importing configuration files from the sensor - Unable to get sensor version from the sensor. Possible reason: X.509 certificate is invalid or sensor version was downgraded. "
Hi,
Normally doing the following fixes the problem.
You need to regenerate the IDSMC Certificate and add the VMS as the trusted host to the sensor.
To generate the certificate do the following.
c:\progra~1\cscopx\mdc\apache\gencert.bat
where c: drive is the drive you installed your VMS.
After this is done, please restart the CiscoWorks Daemon Manager.
You will also need to generate tls key as well as manually re-install the TLS certificate on your sensor.
tls trusted-host from the IPS CLI and specify your VMS's IP address.
tls generate-key
no tls trusted-host ip-address (vms server ip)
tls trusted-host ip-address (vms server ip)
Thanks.
Edward
Similar Messages
-
Can not use Cisco VMS 2.3 to send email alert to admin
Hi all,
I am using IDSM version 5 + Catalyst 6513.
I am going to configure for Cisco VMS 2.3 to send alert email to admin. I downloaded scritp from cisco forum but now I can't configure.
1. I rename the file emailalertv5.txt to emailalertv5.pl
2. I copy the file to directory "E:\CSCOpx\MDC\etc\ids\scripts\"
3. I configure in Cisco VMS 2.3 (like the attachment)
However, I can't receive the alert email from Cisco VMS 2.3. When I connect to Security Monitor, I see many attack events.Hi all,
if you know the answer, please answer me. I am looking for your answer.
I read all materials about IDSM-2 but I can't configure email alert.
Thank you very much. -
Cisco VMS can support management of router and switches
I want to use Cisco VMS to manage my IPS and firewalls.
A also have two routere and five switches in place can i use the same software to monitor and manage them or I need separate software.VMS 2.3 components and the capabilities of each. VMS is packaged in one sub-box with Obtaining Documentation directing you to VMS documentation and the following two CDs:
1.VMS Management and Monitoring Centers Disk 1 of 2Contains these VMS components and associated product documentation:
CiscoWorks Common Services
Auto Update Server
Management Center for Firewalls
Management Center for IPS Sensors1
Monitoring Center for Performance
Monitoring Center for Security
Management Center for VPN Routers
2.VMS Management and Monitoring Centers Disk 2 of 2Contains these VMS components and associated product documentation:
http://www.cisco.com/en/US/products/sw/cscowork/ps2330/products_installation_guide_chapter09186a00803bd364.html#wp1036990
Management Center for Cisco Security Agents
Resource Manager Essentials
Resource Manager Essentials IDU 12
Management Center for IDS Sensors 2.0.12
Monitoring Center for Security 2.0.13
Note You must install IDU 12 included on Disk 2 for RME to work with VMS 2.3 even if you already have RME 3.5 installed on your server. -
Can not query PQH_BUDGET_DETAILS in SQL*Plus
Hi!
I can see the Positions in the Forms-Mask within EBS.
I want to write a concurrent Programm which queries some data form the positions-table.
If i klick on "Help > Diagnostics > Examine" and select "system.last_query" i can see, that the data comes from a view called: "PQH_POS_BUDGETS_V".
But if i try to query this view in SQL*Plus, it is empty.
So i had a look at how this view is build, and i found, that the base tables should be PQH_BUDGETS and PQH_BUDGET_DETAILS.
How can i query the position_id in PQH_BUDGET_DETAILS in a concurrent program or an self-writen BI Publisher Report?
If i try to query in SQL*Plus it's empty.
Who can help me with this issue?
Thank you for your help!
Best regards,
ThomasHi!
Thats great!
Thank you very much!
Best regards,
Thomas -
How can I query all the members of a group using querbuilder? I cannot find any related properties
How can I query all the members of a group using querbuilder? I cannot find any related properties describing members under /home/groups/s/sample_group in jcr repository.
Hi,
FieldPoint Explorer is no longer used to configure FieldPoint systems. However, I do not think that the configuring your system in FieldPoint Explorer is causing the error.
FieldPoint systems are now setup in Measurement and Automation Explorer (MAX). Information on setting up FieldPoint systems in MAX can be found in the MAX help under: Installed Products>> FieldPoint. Also, I recommend upgrading to the latest FieldPoint driver and version of MAX. The FieldPoint VI's will be slightly different when you upgrade, so there is a good chance that this will eliminate the error.
Regards,
Hal L. -
How can I query data from XML file stored as a CLOB ?
Hi folks,
please see below sample of XML file, which is stored in "os_import_docs", column "document" as CLOB.
I would like to query this XML file using some SQL select.
How can I query data form below XML?
<?xml version="1.0" encoding="UTF-8"?>
<etd>
<header>
<AR>000000000</AR>
<AW>0</AW>
<CT>S</CT>
<CU>H</CU>
<CZ>SS48</CZ>
<BU>4</BU>
<CH>0032</CH>
<CK>2012-11-01</CK>
<CL>21:18</CL>
<CW>225</CW>
<CX>0</CX>
<CF>SS-CZL18</CF>
<DV>2</DV>
</header>
<account_group id="234">
<account id="234">
<invoice id="000742024">
<da>
<AR>000742024</AR>
<AW>0</AW>
<CT>D</CT>
<CU>A</CU>
<CH>0032</CH>
<BY>31-10-2012</BY>
<CA>25-10-2012</CA>
<AB>234</AB>
<AA>234</AA>
<BS>88754515</BS>
<AD>Mike Tyson</AD>
<AC>Mike Tyson</AC>
<AZ>CZ6521232465</AZ>
<AE/>
<CG>A</CG>
<AL>A</AL>
<BZ>.</BZ>
<AH>Some street</AH>
<AI/>
<AF>Some city</AF>
<AK>Kraj</AK>
<AG>CZ</AG>
<AJ>885 21</AJ>
<CR>21-11-2012</CR>
<AY>602718709</AY>
<AV>800184965</AV>
<AP/>
<AO/>
<AQ/>
<AN/>
</da>
<da>
<AR>000742024</AR>
<AW>0</AW>
<CT>D</CT>
<CU>A</CU>
<CH>0032</CH>
<BY>31-10-2012</BY>
<CA>25-10-2012</CA>
<AB>234</AB>
<AA>234</AA>
<BS>88754515</BS>
<AD>Mike Tyson</AD>
<AC>Mike Tyson</AC>
<AZ>CZ6521232465</AZ>
<AE/>
<CG>A</CG>
<AL>L</AL>
<BZ>Mike Tyson</BZ>
<AH>Some street</AH>
<AI/>
<AF>Some city</AF>
<AK>Kraj</AK>
<AG>CZ</AG>
<AJ>885 21</AJ>
<CR>21-11-2012</CR>
<AY/>
<AV>800184965</AV>
<AP/>
<AO/>
<AQ/>
<AN/>
</da>
<detaildc CH="0032" AB="234" BS="11888954" BB="32" BA="CZ" AT="" CI="7077329000002340342" AU="" DU="1Z48395" CB="CZK">
<dc>
<AW>0</AW>
<CT>D</CT>
<CU>C</CU>
<BY>31-10-2012</BY>
<CA>25-10-2012</CA>
<CV>8151</CV>
<BT>12111</BT>
<CJ>1</CJ>
<AM>0</AM>
<DR>PC</DR>
<DS/>
<DO>25-10-2012</DO>
<DQ>18:42</DQ>
<CE>1</CE>
<BH>8151</BH>
<CY>8151 SHELL MALKOVICE P</CY>
<DP>049336</DP>
<DT/>
<BQ/>
<BR>500000</BR>
<CN>30</CN>
<CM>030</CM>
<BO>160,00</BO>
<BF>38,900</BF>
<BC>6224,00</BC>
<BI>32,417</BI>
<CD>B</CD>
<BG>0,600</BG>
<BK>31,817</BK>
<BJ>0,000</BJ>
<DI>8</DI>
<BP>20,00%</BP>
<CC>CZK</CC>
<BM>5090,67</BM>
<BN>1018,13</BN>
<BL>6108,80</BL>
<BD>5090,67</BD>
<BE>1018,13</BE>
<DW>6108,80</DW>
<CO>Nafta</CO>
</dc>
</detaildc>
<dt>
<AR>000742024</AR>
<AW>0</AW>
<CT>D</CT>
<CU>T</CU>
<CH>0032</CH>
<BY>31-10-2012</BY>
<CA>25-10-2012</CA>
<AB>234</AB>
<AA>234</AA>
<BS>11888954</BS>
<BB/>
<BA>CZ</BA>
<DG>1</DG>
<CN>30</CN>
<CM>030</CM>
<DF>160,00</DF>
<DH>litr</DH>
<DJ>20,00%</DJ>
<DD>5090,67</DD>
<DE>1018,13</DE>
<DC>6108,80</DC>
<DB>CZK</DB>
<DA>P</DA>
<AX/>
<CQ/>
<CP/>
</dt>
<dt>
<AR>000742024</AR>
<AW>0</AW>
<CT>D</CT>
<CU>T</CU>
<CH>0032</CH>
<BY>31-10-2012</BY>
<CA>25-10-2012</CA>
<AB>234</AB>
<AA>234</AA>
<BS>11888954</BS>
<BB/>
<BA>CZ</BA>
<DG>2</DG>
<CN/>
<CM/>
<DF>160,00</DF>
<DH>litr</DH>
<DJ/>
<DD>5090,67</DD>
<DE>1018,13</DE>
<DC>6108,80</DC>
<DB>CZK</DB>
<DA/>
<AX/>
<CQ/>
<CP/>
</dt>
<dt>
<AR>000742024</AR>
<AW>0</AW>
<CT>D</CT>
<CU>T</CU>
<CH>0032</CH>
<BY>31-10-2012</BY>
<CA>25-10-2012</CA>
<AB>234</AB>
<AA>234</AA>
<BS>11888954</BS>
<BB/>
<BA>CZ</BA>
<DG>19</DG>
<CN/>
<CM/>
<DF/>
<DH/>
<DJ/>
<DD>5090,67</DD>
<DE>1018,13</DE>
<DC>6108,80</DC>
<DB>CZK</DB>
<DA/>
<AX/>
<CQ/>
<CP/>
</dt>
<dt>
<AR>000742024</AR>
<AW>0</AW>
<CT>D</CT>
<CU>T</CU>
<CH>0032</CH>
<BY>31-10-2012</BY>
<CA>25-10-2012</CA>
<AB>234</AB>
<AA>234</AA>
<BS>11888954</BS>
<BB/>
<BA>CZ</BA>
<DG>8</DG>
<CN/>
<CM/>
<DF/>
<DH/>
<DJ/>
<DD>5090,67</DD>
<DE>1018,13</DE>
<DC>6108,80</DC>
<DB>CZK</DB>
<DA/>
<AX/>
<CQ/>
<CP/>
</dt>
</invoice>
</account>
</account_group>
<footer>
<AR>999999999</AR>
<AW>0</AW>
<CT>S</CT>
<CU>T</CU>
<CZ>SS48</CZ>
<BU>4</BU>
<CH>0032</CH>
<CK>2012-11-01</CK>
<CL>23:04</CL>
<CW>225</CW>
<BX>1</BX>
<CS>7</CS>
<BW>0000000000000610880</BW>
</footer>
</etd>sample - not working:
select x.*
from os_import_docs d
,XMLTABLE('/etd/header'
PASSING httpuritype(d.document).getXML()
COLUMNS
response_status varchar2(50) PATH 'AR'
) x
where d.object_id = 2587058
and rownum = 1;
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 6196, maximum: 4000)Many thanks,
TomasHello,
many thanks for the reply. Your examples are very usefull for me.
To answer your questions.
An XML structure:
/etd
/header - repeat in each row in output
/account_group/account
/invoice
/da - repeat for each details under "selected "invoice
/detaildc/dc - the lowest level
/detaildn/dn - the lowest level
/dt - repeat for each details under "selected "invoice
/footer - repeat in each row in outputI would like to to have a 1 row for each "record" in /detaildc section and include related nodes at higher levels.
Please see below XML file, which is simplified file of example in first post, but includes a complete xml structure which needs to be queried in db.
<?xml version="1.0" encoding="UTF-8"?>
<etd>
<header>
<AR>000000000</AR>
<CK>2012-10-31</CK>
<CF>SS-CZL19</CF>
</header>
<account_group id="234">
<account id="234">
<invoice id="EI08P4000">
<da>
<AR>EI08P4000</AR>
<AD>Mickey Mouse</AD>
</da>
<detaildc DU="1Z56655" CB="EUR">
<dc>
<DO>16-10-2012</DO>
<CY>ASFINAG POST_MAUT</CY>
<BM>1940,60</BM>
<CO>Dalnicni znamka</CO>
</dc>
</detaildc>
<detaildc DU="2Z55050" CB="EUR">
<dc>
<DO>17-10-2012</DO>
<CY>ASFINAG POST_MAUT</CY>
<BM>1328,10</BM>
<CO>Dalnicni znamka</CO>
</dc>
</detaildc>
<detaildc DU="2Z90001" CB="EUR">
<dc>
<DO>27-10-2012</DO>
<CY>ASFINAG POST_MAUT</CY>
<BM>185,10</BM>
<CO>Poplatek</CO>
</dc>
</detaildc>
<dt>
<AR>EI08P4000</AR>
<DG>8</DG>
</dt>
</invoice>
</account>
<account id="234">
<invoice id="EI13T7777">
<da>
<AR>EI13T7777</AR>
<AD>Mickey Mouse</AD>
</da>
<detaildc DU="1Z48302" CB="EUR">
<dc>
<DO>26-10-2012</DO>
<CY>SANEF 07706 A 07704</CY>
<BM>232,10</BM>
<CO>Dalnicni poplatek</CO>
</dc>
</detaildc>
<detaildc DU="1Z48302" CB="EUR">
<dc>
<DO>20-10-2012</DO>
<CY>TEST A 07704</CY>
<BM>30,10</BM>
<CO>Poplatek</CO>
</dc>
</detaildc>
<dt>
<AR>EI13T7777</AR>
<DG>8</DG>
</dt>
</invoice>
</account>
<account id="234">
<invoice id="EI327744">
<da>
<AR>EI327744</AR>
<AD>Mickey Mouse</AD>
</da>
<detaildn CI="707732 00000234" >
<dn>
<BY>30-10-2012</BY>
<BM>8,10</BM>
</dn>
</detaildn>
<detaildn CI="707732 00000234" >
<dn>
<BY>30-10-2012</BY>
<BM>399,50</BM>
</dn>
</detaildn>
<dt>
<AR>EI327744</AR>
</dt>
</invoice>
</account>
<account id="234">
<invoice id="EI349515">
<da>
<AR>EI349515</AR>
<AD>Mickey Mouse</AD>
</da>
<detaildc DU="1Z56514" CB="EUR">
<dc>
<DO>29-10-2012</DO>
<CY>ALLAMI AUTOPALYAKEZE</CY>
<BM>1240,60</BM>
<CO>Dalnicni znamka</CO>
</dc>
</detaildc>
<detaildc DU="1Z56515" CB="EUR">
<dc>
<DO>19-10-2012</DO>
<CY>ASFINAG POST_MAUT</CY>
<BM>7428,10</BM>
<CO>Dalnicni znamka</CO>
</dc>
</detaildc>
<detaildc DU="1Z56515" CB="EUR">
<dc>
<DO>12-10-2012</DO>
<CY>UK</CY>
<BM>954,10</BM>
<CO>Poplatek</CO>
</dc>
</detaildc>
<dt>
<AR>EI349515</AR>
<DG>8</DG>
</dt>
</invoice>
</account>
</account_group>
<footer>
<CZ>SS47</CZ>
<BU>4</BU>
<CH>0032</CH>
<CK>2012-10-31</CK>
<CL>01:25</CL>
</footer>
</etd>Expected output
AR CK CF AR4 AD DU CB DO CY BM CO AR5 DG CI BY BM6 CZ BU CH CK7 CL
0 41213 SS-CZL19 EI08P4000 Mickey Mouse 1Z56655 EUR 16-10-2012 ASFINAG POST_MAUT 1940,60 Dalnicni znamka EI08P4000 8 SS47 4 32 41213 01:25
0 41213 SS-CZL19 EI08P4000 Mickey Mouse 2Z55050 EUR 17-10-2012 ASFINAG POST_MAUT 1328,10 Dalnicni znamka EI08P4000 8 SS47 4 32 41213 01:25
0 41213 SS-CZL19 EI08P4000 Mickey Mouse 2Z90001 EUR 27-10-2012 ASFINAG POST_MAUT 185,10 Poplatek EI08P4000 8 SS47 4 32 41213 01:25
0 41213 SS-CZL19 EI13T7777 Mickey Mouse 1Z48302 EUR 26-10-2012 SANEF 07706 A 07704 232,10 Dalnicni poplatek EI13T7777 8 SS47 4 32 41213 01:25
0 41213 SS-CZL19 EI13T7777 Mickey Mouse 1Z48302 EUR 20-10-2012 TEST A 07704 30,10 Poplatek EI13T7777 8 SS47 4 32 41213 01:25
0 41213 SS-CZL19 EI327744 Mickey Mouse EI327744 707732 00000234 30-10-2012 8,10 SS47 4 32 41213 01:25
0 41213 SS-CZL19 EI327744 Mickey Mouse EI327744 707732 00000234 30-10-2012 399,50 SS47 4 32 41213 01:25
0 41213 SS-CZL19 EI349515 Mickey Mouse 1Z56514 EUR 29-10-2012 ALLAMI AUTOPALYAKEZE 1240,60 Dalnicni znamka EI349515 8 SS47 4 32 41213 01:25
0 41213 SS-CZL19 EI349515 Mickey Mouse 1Z56515 EUR 19-10-2012 ASFINAG POST_MAUT 7428,10 Dalnicni znamka EI349515 8 SS47 4 32 41213 01:25
0 41213 SS-CZL19 EI349515 Mickey Mouse 1Z56515 EUR 12-10-2012 UK 954,10 Poplatek EI349515 8 SS47 4 32 41213 01:25 -
I have installed the cisco VMS 3.1 Enterprise edition but after installation. I am not able to open it in web page. I have checked all the services and it was running fine. But after the new installation, it is not opening in internet explorer. I have try with hostname adn IP address it is showing me following error
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.Have you changed the hostname recently. Check the information at http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.0/user/guide/diagnos.html#wp1078582 for more information.
-
How can this query avoid full table scans?
It is difficult to avoid full table scans in the following query because the values of column STATUS reiterant numbers. There are only 10 numbers values for the STATUS column (1..10)
But the table is very large. there are more than 1 million rows in it. A full table scanning consumes too much time.
How can this query avoid full table scans?
Thank you
SELECT SYNC,CUS_ID INTO V_SYNC,V_CUS_ID FROM CONSUMER_MSG_IDX
WHERE CUS_ID = V_TYPE_CUS_HEADER.CUS_ID AND
ADDRESS_ID = V_TYPE_CUS_HEADER.ADDRESS_ID AND
STATUS =! 8;Edited by: junez on Jul 23, 2009 7:30 PMYour code had an extra AND. I also replaced the "not equal" operator, which has display problems with the forum software
SELECT SYNC,CUS_ID
INTO V_SYNC,V_CUS_ID
FROM CONSUMER_MSG_IDX
WHERE CUS_ID = V_TYPE_CUS_HEADER.CUS_ID AND
ADDRESS_ID = V_TYPE_CUS_HEADER.ADDRESS_ID AND
STATUS != 8;Are you sure this query is doing a table scan? Is there an index on CUS_ID, ADDRESS_ID? I would think that would be mostly unique. So I'm not sure why you think the STATUS column is causing problems. It would seem to just be a non-selective additional filter.
Justin -
Can we query a stored procedure results as an SQL Table ?
Hi,
Can we query a results from the results of a stored procedure returning a result set either as cursors or as PL/SQL Table like what we do like this
select * from <tablename>
select * from (select * from tablename) alias. instead of this, can we do like this
select * from (results of stored procedure) alias.
Please Provide any Help.I agree. Pipelined Table Functions are the way to go.
Docs at http://tahiti.oracle.com
Working demos in Morgan's Library at www.psoug.org under Pipelined Table Functions. -
My Cisco Prime Infrastructure ver. 1.2.1.12
Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture.
Please let me know how to access or enable the feature.
Thanks,
TekThis is by no means a full solution, but deleting and re-adding only takes a few minutes if you use the "Export Device" and "Bulk Import" features from the Device Work Center. You can export the desired devices to a CSV file, delete them, then import from the CSV.
Of course, you might lose historical data when deleting the devices, but I'm guessing that's not as relevant since the devices themselves have been replaced by different hardware. -
[nQSError: 13049] User 'BISYSTEMUSER' with 'empty' permission can not query
Hi,
On my local OBIEE 11.1.1.5 Windows 64 bit, I get [nQSError: 13049] error all the time. I understand this must be my configuration is wrong somehow, but comparing with correct installations I can't find a clue, and can't find anything from google either.
Could you please suggest what can be wrong? How to add permissions?
- log in to obiee as weblogic/welcome1
- Administration -> Manage Privileges
- get: State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 13049] User 'BISYSTEMUSER' with 'empty' permission can not query user population.Please have your System Administrator look at the log for more details on this error. (HY000)
I have
- console: myrealm->Users->weblogic and BISystemUser, both in Administrators, BIAdministrators groups
- em: bifoundation_domain->Security->Credentials, system.user=BISystemUser
Thanks,
WeiTry doing the following things:
1) Make sure the user ID you are using as BISystemUser in EM is linked to the BISystemuser role
2) Add the weblogic user ID to Bi administrator role. ( Do the association in EM ).
This should solve your problem.
Thanks,
-Amith. -
DBMS_SCHEDULER: How can I query a job's log history?
Hi,
How can I query a job's log history?
Thanks,
AlanHi
The table user_scheduler_job_run_details contains info about your job
Sushant -
Is cisco prime infrastructure support / can be run as syslog server?
Dear All,
is cisco prime infrastructure support / can be run as syslog server?
and,
where i can see network topology diagram, using cisco prime infrastructure?
many thanks,
JerriHello. Cisco Prime LMS will be replaced by Cisco Prime Infrastructure in the near future.
In the current release of Cisco Prime Infrastructure you can't use topology diagrams. This feature is in roadmap.
About syslog, you can send syslogs to Cisco Prime Infrastructure, but I don't recommend using it as syslog server. Please see this link for more information https://supportforums.cisco.com/thread/2179520
Please rate if this helps -
Unable to view IDS logs from cisco VMS server
Hi,
Pls help me out for viewing IDS logs from my cisco vms server (4th edition with SP2,java 1_4_1.02)
Configured IDS sensor with IDS MC (2.0.1) and updated signatures with latest sig files,
Configured Security monitor to view my IDS sensor and showing TLS was connected and cisco IDS REDP/SDEE,when viewing logs error was server codes need to be update., unreconiged last saved IDS alarms.
Pls give me the solution
Regards
AjayHi Ajay,
when you upgrade to sec mon 2.0.1, the database is the same, but the formats are different.. you need to do somethings for converting these formats, which might take hours together, if ur database has too many events...
for information to convert the file format, refer to this URL:
http://www.cisco.com/en/US/products/sw/cscowork/ps3990/prod_release_note09186a0080386f72.html#wp1087204
see the section "Using the ConvertAndImport.pl Script after Upgrading from Security Monitor 1.2.3 to Security Monitor 2.0.1 "
do this and see.. let us know
Raj -
Any SQL can be query out why AP invoice cannot be select in AR/AP Netting
Dear All,
as the subject, is there any SQL can be query out why AP invoice cannot be select in AR/AP Netting in R12?
For example, invoice A, assume can be select during the AP/AR Netting Batch created. but failed, so i want to use a SQL to query out or diagnostic why this invoice cannot be selected.
Regards
TerryDear All,
as the subject, is there any SQL can be query out why AP invoice cannot be select in AR/AP Netting in R12?
For example, invoice A, assume can be select during the AP/AR Netting Batch created. but failed, so i want to use a SQL to query out or diagnostic why this invoice cannot be selected.
Regards
Terry
Maybe you are looking for
-
SRM 7.0 customer fields not saved in shopping cart
Dear experts, I have created 2 fields using the fields extension in the customizing and set the metadata for them to be displayed. The fields are visible on screen. However when data enteres, this data is not being saved in the Shopping cart document
-
How do i open Webpageicons.db? I'm trying to delete my favicons and can't!
How do i open Webpageicons.db? I'm trying to delete my favicons. Way back some time ago I think instead of deleting the items inside the favicons file I sent the whole folder to the trash. So now I don't have a file folder, its a document page that A
-
Macbook Pro can't connect to WEP 128 bits Router.
I'll try to list everything here so you can get a clear picture of the situation. First, after all my PCs flatmates connected to our Wireless internet (Amper aw01), I was still struggling. I tried everything, from WEP, to WEP 128 hex, WEP 128 ASCII,
-
How to insert video without affecting audio on Mac
I'm trying to insert video but it keeps displacing my audio in soundtrack. I hold the alt button as it says in help instructions but it doesn't work. How do I do this seems a simple thing a program like this should do.
-
Timed out what is this and how to fix
how to fix timed out trouble