Cisco VPN Certificate

I was trying to setup the Cisco VPN with SL. I just got to the point where I have to select the certificate (instead of shared secret key). Everytime I click on "Select..." it says "Keine Rechner-Zertifikate gefunden" (in English: "No computer certificates found")
What's the exact problem?

i have the same problem! Please Help

Similar Messages

  • Valid Cisco VPN certificate in keychain is not found by setup

    My fellow MBP fans!
    Has anyone successfully configured a MBP with 10.6.8 to connect to a Cisco VPN router using the built VPN Client, with certificate authentication? Please how, please!
    The company I work for has recently installed a Cisco RV016 router, to allow us to connect remotely over a VPN connection.
    Setting up this connection has proved so far a total nightmare.
    The router exported a certificate. This I imported into the keychain and placed it in the system folder. The certificate seems to be trusted.
    When setting up the network interfaces in the System preferences, I can add a Cisco IPsec interface. It accepts the IP address of the router, the userid and the password. It then asks for the authentication method. When opting for certificate, you can then browse the certificates installed to pick the right one. However, the facility does not find any certificates, ie the installed certificate is not found.
    Either the certificate is in the wrong place, or in the wrong format, or just plain wrong. The certificate I am trying to use is in .pem format.
    This is what I tried so far, but failed to make any progress.
    - place the certificate in several locations
    - convert the .pem certificate to pk12 or pk7 format, after converting it with openssl
    - reset the router and request a new certificate
    The same credentials work fine on a Windows machine.
    Solving this would mean a lot.

    The legacy VPN-client is not supported under Windows 8.1 and as the client is EOL anounced, it probably will never be supported. You have a couple of options:
    There are some reports on the internet where some people got it working. If you go that way you are still running an unsupported scenario.
    Go the Cisco-way and change to AnyConnect. For that your VPN-gateway needs a nearly complete new VPN-config. But in the long term, that's the way to go.
    Use an alternate client like the one from shrew-soft: https://www.shrew.net/software
    Don't stop after you've improved your network! Improve the world by lending money to the working poor:
    http://www.kiva.org/invitedby/karsteni

  • Certificate authentication for Cisco VPN client

    I am trying to configure the cisco VPN client for certificate authentication on my ASA 5512-X. I have it setup currently for group authentication with shared pass. This works fine. But in order for you to pass pci compliance you cannot allow aggresive mode for ikev1. the only way to disable aggresive mode (and use main mode) is to use certificate authentication for the vpn client. I know that some one out there must being doing this already. I am goign round and round with this. I am missing some thing.
    I have tried as I might and all I can get are some cryptic error messages from the client and nothing on the firewall. IE failed to genterate signature, invalid remote signature id. I have tried using different signatures (one built on ASA and bought from Godaddy, and one built from Windows CA, and one self signed).
    Can some one provide the instructions on seting this up (asdm or cli). Can this even be done? I would love to just use the AnyConnect client but I believe you need licensing for that since our system states only 2 allowed. Thank you for your help.                    

    Dear Doug ,
              What is asa code your are running on ASA hardware , for cisco anyconnect you need have Code 8.0 on your hardware with cisco anyconnect essential license enabled .Paste your me show version i will help you whether you need to procure license for your hardware . By default your hardware will be shipped with any connect essential license when you have order your hardware with asa code above 8.0 .
    With Any connect essential you are allowed to use upto total VPN peers allowed based on your hardware
    1)  What is the AnyConnect Essentials License?
    The Anyconnect Essentials is a license that allows you to connect up to your 'Total VPN Peers"  platform limit with AnyConnect.  Without an AnyConnect Essentials license, you are limited to the 'SSLVPN Peers' limit on your device.  With the Anyconnect Essentials License, you can only use Anyconnect for SSL - other features such as CSD (Cisco Secure Desktop) and using the SSLVPN portal page for anything other than launching AnyConnect are restricted.
    You can see your limits for the various licensing by issuing the 'show version' command on your ASA.
    Licensed features for this platform:
    Maximum Physical Interfaces    : Unlimited
    Maximum VLANs                  : 150      
    Inside Hosts                   : Unlimited
    Failover                       : Active/Active
    VPN-DES                        : Enabled  
    VPN-3DES-AES                   : Enabled  
    Security Contexts              : 2        
    GTP/GPRS                       : Disabled 
    SSL VPN Peers                  : 2        
    Total VPN Peers                : 750      
    Shared License                 : Disabled
    AnyConnect for Mobile          : Disabled 
    AnyConnect for Cisco VPN Phone : Disabled 
    AnyConnect Essentials          : Disabled 
    Advanced Endpoint Assessment   : Disabled 
    UC Phone Proxy Sessions        : 2        
    Total UC Proxy Sessions        : 2        
    Botnet Traffic Filter          : Disabled
    Licensed features for this platform:
    Maximum Physical Interfaces    : Unlimited
    Maximum VLANs                  : 150      
    Inside Hosts                   : Unlimited
    Failover                       : Active/Active
    VPN-DES                        : Enabled  
    VPN-3DES-AES                   : Enabled  
    Security Contexts              : 2        
    GTP/GPRS                       : Disabled 
    SSL VPN Peers                  : 2        
    Total VPN Peers                : 750      
    Shared License                 : Disabled
    AnyConnect for Mobile          : Disabled 
    AnyConnect for Cisco VPN Phone : Disabled 
    AnyConnect Essentials          :  Enabled
    Advanced Endpoint Assessment   : Disabled 
    UC Phone Proxy Sessions        : 2        
    Total UC Proxy Sessions        : 2        
    Botnet Traffic Filter          : Disabled
    Any connect VPN Configuration .
    http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808efbd2.shtml

  • Cisco CA + Cisco VPN Client - Error 42: Unable to create certificate enrolment request

    We find ourselves in a difficult situation with the
    Cisco VPN Cleint version 5.0.07.0290 where it keeps giving us an
    "Error 42: Unable to create certificate enrolment request" when we attempt to use the Online enrolment method to create and enrol a new certificate.
    There is no additional information in the VPN client logs where we have set 3-High for all logs.
    In addition, Wireshark does not show any packets sent from the machine running the client to the Cisco 3825 router which runs the Cisco CA.
    To create and enrol a certificate we do the following:
    1. Click on the Enroll button to show the Certificate Enrolment dialog
    2. Select  Online
    3. Select <New> for Certificate Authority
    4. Enter http://192.168.120.1 as CA URL (note, 192.168.120.1 is the IP of the Cisco 3825)
    5. Click Next to display the dialog where we can enter certificate details
    6. Enter details in all fileds except IP Address and Domain
    7. Click Enroll which shows a dilaog with the Error 42 ... message in it.
    If we attempt to create a request by using the File method, all works fine, that is, the client creates a file with the enrolment request.
    The fact that the client does not send any messages to the Cisco CA leads us to belive that we have a pronblem on the clinet machine. However, the client does not write any information in the logs, so it is a bit hard to fix the problem.
    We will be grateful for any assistance that you can provide with this issue. I can provide additional configuration information if required for both the client and the Cisco CA. Note that we have not modified any client configuration. Basically, we installed the clinet on a Windows 7 64bit machine and attempted the steps listed above.
    Thank you
    Emil

    FYI, I just came up against this problem and the solution in my instance was to ensure that the Cisco CA Server was configured to automatically grant certificate requests.
    Cisco2691#conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    Cisco2691(config)#crypto pki server CERTSERVER
    Cisco2691(cs-server)#grant ?
      auto     Automatically grant incoming SCEP enrollment requests
      none     Automatically reject any incoming SCEP enrollment request
      ra-auto  Automatically grant RA-authorized incoming SCEP enrollment request
    Cisco2691(cs-server)#grant auto
    % The CS config is locked. You need to shut the server off before changing its configuration.
    Cisco2691(cs-server)#shut
    Cisco2691(cs-server)#grant auto
    Cisco2691(cs-server)#
    Mar 25 19:39:53.356: %PKI-6-CS_GRANT_AUTO: All enrollment requests will be automatically granted.
    Cisco2691(cs-server)#no shut
    % Certificate Server enabled.

  • Using Cisco VPN client certificate for built in IPSec?

    Hi,
    Does anybody know if it is possible to "convert" a certificate exported from Cisco VPN client and import it into the Keychain for using it with built-in IPSec in Snow Leopard?
    Thanks,
    Oli

    I too am having trouble importing the Cisco certificate. It would be nice for some clear documentation. We've been successful converting the x.509 cer to KPCS#7 using openssl which will import into the keychain. However, the VPN (Cisco IPSec) sill doesn't see it.

  • Need HELPS! ASA 5505 8.4 Cisco VPN Client cannot ping any internal host

    Hi:
    Need your great help for my new ASA 5505 (8.4)
    I just set a new ASA 5505 with 8.4. However, I cannot ping any host after VPN in with Cisco VPN client. Please see below posted configuration file, thanks for any suggestion.
    ASA Version 8.4(3)
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    switchport access vlan 2
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 172.29.8.254 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address 177.164.222.140 255.255.255.248
    ftp mode passive
    clock timezone GMT 0
    dns server-group DefaultDNS
    domain-name ABCtech.com
    same-security-traffic permit inter-interface
    object network obj_any
    subnet 172.29.8.0 255.255.255.0
    object service RDP
    service tcp source eq 3389
    object network orange
    host 172.29.8.151
    object network WAN_173_164_222_138
    host 177.164.222.138
    object service SMTP
    service tcp source eq smtp
    object service PPTP
    service tcp source eq pptp
    object service JT_WWW
    service tcp source eq www
    object service JT_HTTPS
    service tcp source eq https
    object network obj_lex
    subnet 172.29.88.0 255.255.255.0
    description Lexington office network
    object network obj_HQ
    subnet 172.29.8.0 255.255.255.0
    object network guava
    host 172.29.8.3
    object service L2TP
    service udp source eq 1701
    access-list VPN_Tunnel_User standard permit 172.29.8.0 255.255.255.0
    access-list VPN_Tunnel_User standard permit 172.29.88.0 255.255.255.0
    access-list inside_access_in extended permit icmp any any
    access-list inside_access_in extended deny tcp any any eq 135
    access-list inside_access_in extended deny tcp any eq 135 any
    access-list inside_access_in extended deny udp any eq 135 any
    access-list inside_access_in extended deny udp any any eq 135
    access-list inside_access_in extended deny tcp any any eq 1591
    access-list inside_access_in extended deny tcp any eq 1591 any
    access-list inside_access_in extended deny udp any eq 1591 any
    access-list inside_access_in extended deny udp any any eq 1591
    access-list inside_access_in extended deny tcp any any eq 1214
    access-list inside_access_in extended deny tcp any eq 1214 any
    access-list inside_access_in extended deny udp any any eq 1214
    access-list inside_access_in extended deny udp any eq 1214 any
    access-list inside_access_in extended permit ip any any
    access-list inside_access_in extended permit tcp any any eq www
    access-list inside_access_in extended permit tcp any eq www any
    access-list outside_access_in extended permit icmp any any
    access-list outside_access_in extended permit tcp any host 177.164.222.138 eq 33
    89
    access-list outside_access_in extended permit tcp any host 177.164.222.138 eq sm
    tp
    access-list outside_access_in extended permit tcp any host 177.164.222.138 eq pp
    tp
    access-list outside_access_in extended permit tcp any host 177.164.222.138 eq ww
    w
    access-list outside_access_in extended permit tcp any host 177.164.222.138 eq ht
    tps
    access-list outside_access_in extended permit gre any host 177.164.222.138
    access-list outside_access_in extended permit udp any host 177.164.222.138 eq 17
    01
    access-list outside_access_in extended permit ip any any
    access-list inside_access_out extended permit icmp any any
    access-list inside_access_out extended permit ip any any
    access-list outside_cryptomap extended permit ip 172.29.8.0 255.255.255.0 172.29
    .88.0 255.255.255.0
    access-list inside_in extended permit icmp any any
    access-list inside_in extended permit ip any any
    access-list inside_in extended permit udp any any eq isakmp
    access-list inside_in extended permit udp any eq isakmp any
    access-list inside_in extended permit udp any any
    access-list inside_in extended permit tcp any any
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    ip local pool ABC_HQVPN_DHCP 172.29.8.210-172.29.8.230 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    asdm history enable
    arp timeout 14400
    nat (inside,outside) source static orange interface service RDP RDP
    nat (inside,outside) source static obj_HQ obj_HQ destination static obj_lex obj_
    lex route-lookup
    nat (inside,outside) source static guava WAN_173_164_222_138 service JT_WWW JT_W
    WW
    nat (inside,outside) source static guava WAN_173_164_222_138 service JT_HTTPS JT
    _HTTPS
    nat (inside,outside) source static guava WAN_173_164_222_138 service RDP RDP
    nat (inside,outside) source static guava WAN_173_164_222_138 service SMTP SMTP
    nat (inside,outside) source static guava WAN_173_164_222_138 service PPTP PPTP
    nat (inside,outside) source static guava WAN_173_164_222_138 service L2TP L2TP
    object network obj_any
    nat (inside,outside) dynamic interface
    access-group inside_in in interface inside
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 177.164.222.142 1
    route inside 172.29.168.0 255.255.255.0 172.29.8.253 1
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa-server Guava protocol nt
    aaa-server Guava (inside) host 172.29.8.3
    timeout 15
    nt-auth-domain-controller guava
    user-identity default-domain LOCAL
    http server enable
    http 172.29.8.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set Remote_VPN_Set esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set Remote_vpn_set esp-3des esp-md5-hmac
    crypto ipsec ikev2 ipsec-proposal AES256
    protocol esp encryption aes-256
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES192
    protocol esp encryption aes-192
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES
    protocol esp encryption aes
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal 3DES
    protocol esp encryption 3des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal DES
    protocol esp encryption des
    protocol esp integrity sha-1 md5
    crypto dynamic-map outside_dyn_map 20 set ikev1 transform-set Remote_VPN_Set
    crypto dynamic-map outside_dyn_map 20 set reverse-route
    crypto map outside_map 1 match address outside_cryptomap
    crypto map outside_map 1 set peer 173.190.123.138
    crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5
    ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ES
    P-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
    crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
    crypto map outside_map interface outside
    crypto ikev2 policy 1
    encryption aes-256
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 10
    encryption aes-192
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 20
    encryption aes
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 30
    encryption 3des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 40
    encryption des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 enable outside
    crypto ikev1 enable outside
    crypto ikev1 policy 1
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 43200
    crypto ikev1 policy 10
    authentication crack
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 20
    authentication rsa-sig
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 30
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 40
    authentication crack
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 50
    authentication rsa-sig
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 60
    authentication pre-share
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 70
    authentication crack
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 80
    authentication rsa-sig
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 90
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 100
    authentication crack
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 110
    authentication rsa-sig
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 120
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 130
    authentication crack
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 140
    authentication rsa-sig
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 150
    authentication pre-share
    encryption des
    hash sha
    group 2
    lifetime 86400
    telnet 192.168.1.0 255.255.255.0 inside
    telnet 172.29.8.0 255.255.255.0 inside
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside vpnclient-wins-override
    dhcprelay server 172.29.8.3 inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    enable outside
    group-policy ABCtech_VPN internal
    group-policy ABCtech_VPN attributes
    dns-server value 172.29.8.3
    vpn-tunnel-protocol ikev1
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value VPN_Tunnel_User
    default-domain value ABCtech.local
    group-policy GroupPolicy_10.8.8.1 internal
    group-policy GroupPolicy_10.8.8.1 attributes
    vpn-tunnel-protocol ikev1 ikev2
    username who password eicyrfJBrqOaxQvS encrypted
    tunnel-group 10.8.8.1 type ipsec-l2l
    tunnel-group 10.8.8.1 general-attributes
    default-group-policy GroupPolicy_10.8.8.1
    tunnel-group 10.8.8.1 ipsec-attributes
    ikev1 pre-shared-key *****
    ikev2 remote-authentication pre-shared-key *****
    ikev2 remote-authentication certificate
    ikev2 local-authentication pre-shared-key *****
    tunnel-group ABCtech type remote-access
    tunnel-group ABCtech general-attributes
    address-pool ABC_HQVPN_DHCP
    authentication-server-group Guava
    default-group-policy ABCtech_VPN
    tunnel-group ABCtech ipsec-attributes
    ikev1 pre-shared-key *****
    tunnel-group 173.190.123.138 type ipsec-l2l
    tunnel-group 173.190.123.138 general-attributes
    default-group-policy GroupPolicy_10.8.8.1
    tunnel-group 173.190.123.138 ipsec-attributes
    ikev1 pre-shared-key *****
    ikev2 remote-authentication pre-shared-key *****
    ikev2 remote-authentication certificate
    ikev2 local-authentication pre-shared-key *****
    class-map inspection_default
    match default-inspection-traffic
    policy-map global_policy
    class inspection_default
      inspect pptp
      inspect ftp
      inspect netbios
    smtp-server 172.29.8.3
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:6a26676668b742900360f924b4bc80de
    : end

    Hello Wayne,
    Can you use a different subnet range than the internal interface, this could cause you a LOT of issues and hours on troubleshooting, so use a dedicated different Ip address range...
    I can see that the local Pool range is included into the inside interface Ip address subnet range, change that and the related config ( NAT,etc, ) and let us know what happens,
    Regards,
    Julio
    Security Trainer

  • Cisco VPN client and License

    Hello,
    We have a Cisco ASA 5520 with the VPN PLus License and 8.04 IOS installed, we want to set up vpn access to our users. We can use the cisco VPN client which works on WIndows Platform, but we also have MAC OS 10.7 which works only with Cisco Anyconnect.
    I am a little bit lost with all the client and the license, actually we can't setup more than 2 vpn session with an Anyconnect client installed on MAC or Windows. The authentication is by Certificate, the first two connect fine, but the third one don't connect and prompt for a username / password.
    I joined a SH VER of my ASA, if anyome can tell me what is wrong on the license or perhaps it's a configuration problem?
    Thanks a lot for the answer.
    Mathieu.
    fw-eps-02# sh ver
    Cisco Adaptive Security Appliance Software Version 8.0(4)
    Device Manager Version 6.4(1)
    Compiled on Thu 07-Aug-08 20:53 by builders
    System image file is "disk0:/asa804-k8.bin"
    Config file at boot was "startup-config"
    fw-eps-02 up 1 hour 36 mins
    Hardware:   ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
    Internal ATA Compact Flash, 256MB
    BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
    Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                                 Boot microcode   : CN1000-MC-BOOT-2.00
                                 SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                                 IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.05
    0: Ext: GigabitEthernet0/0  : address is c84c.75da.9a58, irq 9
    1: Ext: GigabitEthernet0/1  : address is c84c.75da.9a59, irq 9
    2: Ext: GigabitEthernet0/2  : address is c84c.75da.9a5a, irq 9
    3: Ext: GigabitEthernet0/3  : address is c84c.75da.9a5b, irq 9
    4: Ext: Management0/0       : address is c84c.75da.9a5c, irq 11
    5: Int: Not used            : irq 11
    6: Int: Not used            : irq 5
    Licensed features for this platform:
    Maximum Physical Interfaces  : Unlimited
    Maximum VLANs                : 150
    Inside Hosts                 : Unlimited
    Failover                     : Active/Active
    VPN-DES                      : Enabled
    VPN-3DES-AES                 : Enabled
    Security Contexts            : 2
    GTP/GPRS                     : Disabled
    VPN Peers                    : 750
    WebVPN Peers                 : 2
    AnyConnect for Mobile        : Disabled
    AnyConnect for Linksys phone : Disabled
    Advanced Endpoint Assessment : Disabled
    UC Proxy Sessions            : 2
    This platform has an ASA 5520 VPN Plus license.
    Serial Number: JMX1433L0Y3
    Running Activation Key: 0x3a17c153 0x8c141630 0xe0f3b5d4 0x86044ccc 0x47193392
    Configuration register is 0x40 (will be 0x1 at next reload)
    Configuration last modified by mgeffroy at 15:33:11.409 CEST Mon Jan 23 2012
    fw-eps-02#

    why don't you use built-in client in mac osx? it supports certificate authentication also.
    another solution would be to buy additional ssl vpn licences: there is a limit of two ssl vpn sessions by default.
    Sent from Cisco Technical Support iPad App

  • How to increase built-in cisco vpn peer response timer?

    Hi,
    I use OS x in-built cisco vpn client to connect to work VPN.
    The VPN server, or perhaps the radius server, takes a long time to return a response. OS X always try for 10 seconds, then drop the conneciton when no response from the remote peer. When I use cisco vpn client on a windows machine, the vpn client has a setting to allow for 90 seconds remote peer response time. It works fine using cisco vpn client.
    I prefer to use os x as my primary working environment, so I need to fix this problme. My question is how to increase the phase 1 & 2 timer for vpn under 10.6.7. I have tried to change racoon.conf phase 1 & phase 2 timer, but it made no difference. OS X only try for 10 seconds.
    Any ideas? (besides asking work people to fix the server or radius problem)
    Thanks
    jmsherry123

    i have the same problem ... certificate is imported in keychain, but cant select it when setup vpn connection

  • Cisco VPN issues on Windows 7 bootcamp

    Cisco vpn client does not work properly with bootcamp, I can connect and authenticate and bring up the tunnel but cannot access anything through the tunnel, if I look at the Cisco VPN client statistics, all the packets are being discarded.
    anyone had the same issue?

    Same issue here, Windows 8 Pro 64bit, eToken (Aladdin) Pro (V.with Cisco Systems VPN Client Version 5.0.07.0440 -> VPN Error-Log :
    20     12:59:24.194  08/14/13  Sev=Warning/2      CERT/0xA3600383
    Could not load certificate cn=uxyz (VPN),ou=VPN,o=uxyz GmbH,st=Germany,c=DE from store Microsoft User Certificate. Reason: store empty
    21     12:59:24.195  08/14/13  Sev=Warning/2      CERT/0xA3600456
    If you are using a smartcard or token containing a certificate, verify that it is plugged in and try again.
    22     12:59:24.195  08/14/13  Sev=Warning/2      IKE/0xE3000234
    Unable to open certificate (cn=uxyz (VPN),ou=VPN,o=xyz GmbH,st=Germany,c=DE).
    If you are using a smartcard or token containing a certificate, verify the correct one is plugged in and try again.
    VPN-Client Responding : Error 403
    Thanks in advance for any ideas or solution !!

  • Cisco vpn on Windows 8/8.1 x64

    Hi!
    I know that the support for Cisco VPN Clinet is suspended a long time.
    But, it is only client that operates with a support for Etoken.
    Here, it is the same problem for this issue:
    https://supportforums.cisco.com/discussion/11882951/cisco-vpn-client-windows-8?recent=false
    It is a problem with certificate storage in Windows 8 x64.
    Can you tell us, it is possible to make a small update to repair this error.
    On Windows 8 x32 all it is perfect with Etoken.

    TheGreenBow works with hundreds of different kinds of VPN hosts/servers. The trial version is fully functional so that you can test it. Cisco is no longer developing their VPN client so I don't think you're going to get your question answered.

  • Importing Cisco VPN information into Finder VPN

    Hello,
    I have recently upgraded to OSX Lion and the Cisco VPN Client used by my university no longer works. They suggest another client (Shrew Soft), which also doesn't work. What I'd like to be able to do is use the VPN configuration information provided by my institute with the Finder's own VPN capability, bypassing the need for a buggy client programm.
    I've already read this thread, however it hasn't helped:
    https://discussions.apple.com/thread/2274119?start=0&tstart=0
    My problem seems to be that I need TWO files to configure Cisco correctly, a root certificate (which appears to be in .pem format) and a .pcf file. If I follow the "standard procedure" for importing the .pcf details -- that is, without using the root certificate somehow -- I get the message "The VPN server did not respond. Verify the server address and try reconnecting." Clearly I need somehow to be using BOTH files in order to establish a connection.
    I have messed around with adding the root certificate to my System keychain, but the Finder doesn't display it when I go to "authentification settings". Instead I have only two certificates with "apple" in the name.
    Even if I could add the root certificate successfully, this would surely be fruitless, as I would then no longer be using the shared secret.
    SO, my query is: How can I combine both of these files into a single certificate that I can then add to my keychain and use for machine identification? Please bear in mind that I am not a computer specialist and am not au fait with Open SSL, and so forth. I'm prepared to grapple with it if it's the only way to get my VPN working again, but I will really need a very clear explanation of each step!
    Many thanks in advance!

    No ideas?

  • Cisco VPN client & Microsoft ISA firewall client.

    Hi all,
    could someone give me advice how to set
    up Cisco VPN client to route traffic
    to our proxy ISA 2004. We have installed
    Microsoft firewall client on PCs but we dont know how to set up routing of IPSEC
    to Proxy.
    I know that this is maybe problem of Microsoft but maybe it is possible to do this directly in Cisco VPN client.
    Any suggestions?
    BR
    jl

    Be sure that the Department or organizational unit (OU) corresponds to the Cisco VPN Client group name, as configured in the PIX vpngroup name. Select the correct Certificate Service Provider (CSP) appropriate for your setup
    http://cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094e69.shtml

  • Cisco VPN client x64 for win7 - will not install

    Hello guys,
    I have fresh windows 7 x64 installation and I try install Cisco VPN client (vpnclient-winx64-msi-5.0.07.0290-k9.exe). Installation ends with fatal error "Installation ended prematurely of an error". I red lot of 'step-by-step' how to solve this problem (run as administrator, even though that I'm administrator; UAC disabled; run in WinXP-mode; etc), without success.
    I tried run installation process from cmd with verbose logging "msiexec /i vpnclient_setup.msi /lv log.txt" (and other 'recomended' optional parameters). The same result - fatal error.
    Can anybody tell me where is the problem? (installation file is not corupted)
    Verbose log ends with this (whole log is attached):
    <cut>
    Action ended 22:35:25: WiseNextDlg. Return value 3.
    DEBUG: Error 2896:  Executing action WiseNextDlg failed.
    Internal Error 2896. WiseNextDlg
    Action ended 22:35:25: Welcome_Dialog. Return value 3.
    MSI (c) (70:2C) [22:35:25:997]: Doing action: Fatal_Error
    Action start 22:35:25: Fatal_Error.
    MSI (c) (70:2C) [22:35:25:998]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Fatal_Error'
    MSI (c) (70:18) [22:35:26:725]: Doing action: WiseCleanup
    Action start 22:35:26: WiseCleanup.
    MSI (c) (70:1C) [22:35:26:736]: Invoking remote custom action. DLL: C:\Users\kyrcm\AppData\Local\Temp\MSI2023.tmp, Entrypoint: Cleanup
    Action ended 22:35:26: WiseCleanup. Return value 1.
    Action ended 22:35:26: Fatal_Error. Return value 2.
    Action ended 22:35:26: INSTALL. Return value 3.
    MSI (c) (70:2C) [22:35:26:791]: Destroying RemoteAPI object.
    MSI (c) (70:4C) [22:35:26:792]: Custom Action Manager thread ending.
    === Logging stopped: 4. 10. 2010  22:35:26 ===
    MSI (c) (70:2C) [22:35:26:794]: Note: 1: 1708
    MSI (c) (70:2C) [22:35:26:794]: Product: Cisco Systems VPN Client 5.0.07.0290 -- Installation operation failed.
    </cut>
    thanks,
    martin

    LOG:
    === Verbose logging started: 13.10.2010  14:58:45  Build type: SHIP UNICODE 5.00.7600.00  Calling process: C:\Windows\SysWOW64\msiexec.exe ===
    MSI (c) (48:6C) [14:58:45:636]: Font created.  Charset: Req=0, Ret=0, Font: Req=, Ret=Arial
    MSI (c) (48:6C) [14:58:45:636]: Font created.  Charset: Req=0, Ret=0, Font: Req=, Ret=Arial
    MSI (c) (48:AC) [14:58:45:657]: Resetting cached policy values
    MSI (c) (48:AC) [14:58:45:657]: Machine policy value 'Debug' is 0
    MSI (c) (48:AC) [14:58:45:657]: ******* RunEngine:
               ******* Product: vpnclient_setup.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (48:AC) [14:58:45:666]: Machine policy value 'DisableUserInstalls' is 0
    MSI (c) (48:AC) [14:58:45:683]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi' against software restriction policy
    MSI (c) (48:AC) [14:58:45:683]: Note: 1: 2262 2:  DigitalSignature 3: -2147287038
    MSI (c) (48:AC) [14:58:45:683]: SOFTWARE RESTRICTION POLICY: C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi is not digitally signed
    MSI (c) (48:AC) [14:58:45:685]: SOFTWARE RESTRICTION POLICY: C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi is permitted to run at the 'unrestricted' authorization level.
    MSI (c) (48:AC) [14:58:45:738]: Cloaking enabled.
    MSI (c) (48:AC) [14:58:45:738]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (48:AC) [14:58:45:744]: End dialog not enabled
    MSI (c) (48:AC) [14:58:45:744]: Original package ==> C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi
    MSI (c) (48:AC) [14:58:45:744]: Package we're running from ==> C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi
    MSI (c) (48:AC) [14:58:45:749]: APPCOMPAT: Compatibility mode property overrides found.
    MSI (c) (48:AC) [14:58:45:749]: APPCOMPAT: looking for appcompat database entry with ProductCode '{467D5E81-8349-4892-9E81-C3674ED8E451}'.
    MSI (c) (48:AC) [14:58:45:749]: APPCOMPAT: no matching ProductCode found in database.
    MSI (c) (48:AC) [14:58:45:753]: MSCOREE not loaded loading copy from system32
    MSI (c) (48:AC) [14:58:45:755]: Machine policy value 'TransformsSecure' is 0
    MSI (c) (48:AC) [14:58:45:755]: User policy value 'TransformsAtSource' is 0
    MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'DisablePatch' is 0
    MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'AllowLockdownPatch' is 0
    MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'DisableLUAPatching' is 0
    MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'DisableFlyWeightPatching' is 0
    MSI (c) (48:AC) [14:58:45:756]: APPCOMPAT: looking for appcompat database entry with ProductCode '{467D5E81-8349-4892-9E81-C3674ED8E451}'.
    MSI (c) (48:AC) [14:58:45:756]: APPCOMPAT: no matching ProductCode found in database.
    MSI (c) (48:AC) [14:58:45:757]: Transforms are not secure.
    MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\log.txt'.
    MSI (c) (48:AC) [14:58:45:757]: Command Line: CURRENTDIRECTORY=C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9 CLIENTUILEVEL=0 CLIENTPROCESSID=7496
    MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{A8E53AA2-297F-4262-9996-753440EF4AB0}'.
    MSI (c) (48:AC) [14:58:45:757]: Product Code passed to Engine.Initialize:           ''
    MSI (c) (48:AC) [14:58:45:757]: Product Code from property table before transforms: '{467D5E81-8349-4892-9E81-C3674ED8E451}'
    MSI (c) (48:AC) [14:58:45:757]: Product Code from property table after transforms:  '{467D5E81-8349-4892-9E81-C3674ED8E451}'
    MSI (c) (48:AC) [14:58:45:757]: Product not registered: beginning first-time install
    MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
    MSI (c) (48:AC) [14:58:45:757]: Entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (c) (48:AC) [14:58:45:757]: User policy value 'SearchOrder' is 'nmu'
    MSI (c) (48:AC) [14:58:45:757]: Adding new sources is allowed.
    MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
    MSI (c) (48:AC) [14:58:45:757]: Package name extracted from package path: 'vpnclient_setup.msi'
    MSI (c) (48:AC) [14:58:45:757]: Package to be registered: 'vpnclient_setup.msi'
    MSI (c) (48:AC) [14:58:45:758]: Note: 1: 2262 2: AdminProperties 3: -2147287038
    MSI (c) (48:AC) [14:58:45:758]: Machine policy value 'DisableMsi' is 0
    MSI (c) (48:AC) [14:58:45:758]: Machine policy value 'AlwaysInstallElevated' is 0
    MSI (c) (48:AC) [14:58:45:758]: User policy value 'AlwaysInstallElevated' is 0
    MSI (c) (48:AC) [14:58:45:758]: Product installation will be elevated because user is admin and product is being installed per-machine.
    MSI (c) (48:AC) [14:58:45:758]: Running product '{467D5E81-8349-4892-9E81-C3674ED8E451}' with elevated privileges: Product is assigned.
    MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9'.
    MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '0'.
    MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '7496'.
    MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
    MSI (c) (48:AC) [14:58:45:758]: TRANSFORMS property is now:
    MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
    MSI (c) (48:AC) [14:58:45:758]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming
    MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Favorites
    MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Documents
    MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Recent
    MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Templates
    MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\ProgramData
    MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Local
    MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Pictures
    MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (c) (48:AC) [14:58:45:762]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
    MSI (c) (48:AC) [14:58:45:762]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
    MSI (c) (48:AC) [14:58:45:762]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Desktop
    MSI (c) (48:AC) [14:58:45:764]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
    MSI (c) (48:AC) [14:58:45:764]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
    MSI (c) (48:AC) [14:58:45:765]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
    MSI (c) (48:AC) [14:58:45:769]: MSI_LUA: Setting AdminUser property to 1 because this is the client or the user has already permitted elevation
    MSI (c) (48:AC) [14:58:45:769]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
    MSI (c) (48:AC) [14:58:45:769]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'CIO'.
    MSI (c) (48:AC) [14:58:45:769]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding COMPANYNAME property. Its value is 'Accenture'.
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi'.
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi'.
    MSI (c) (48:AC) [14:58:45:769]: Machine policy value 'MsiDisableEmbeddedUI' is 0
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\'.
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\'.
    MSI (c) (48:6C) [14:58:45:770]: PROPERTY CHANGE: Adding VersionHandler property. Its value is '5.00'.
    === Logging started: 13.10.2010  14:58:45 ===
    MSI (c) (48:AC) [14:58:45:776]: Note: 1: 2205 2:  3: PatchPackage
    MSI (c) (48:AC) [14:58:45:776]: Machine policy value 'DisableRollback' is 0
    MSI (c) (48:AC) [14:58:45:776]: User policy value 'DisableRollback' is 0
    MSI (c) (48:AC) [14:58:45:776]: PROPERTY CHANGE: Adding UILevel property. Its value is '5'.
    MSI (c) (48:AC) [14:58:45:776]: Note: 1: 2262 2: Font 3: -2147287038
    MSI (c) (48:AC) [14:58:45:777]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
    MSI (c) (48:AC) [14:58:45:777]: PROPERTY CHANGE: Adding SHIMFLAGS property. Its value is '512'.
    MSI (c) (48:AC) [14:58:45:777]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
    MSI (c) (48:AC) [14:58:45:777]: Doing action: INSTALL
    Action start 14:58:45: INSTALL.
    MSI (c) (48:AC) [14:58:45:777]: UI Sequence table 'InstallUISequence' is present and populated.
    MSI (c) (48:AC) [14:58:45:777]: Running UISequence
    MSI (c) (48:AC) [14:58:45:777]: PROPERTY CHANGE: Adding EXECUTEACTION property. Its value is 'INSTALL'.
    MSI (c) (48:AC) [14:58:45:778]: Doing action: WiseStartup
    Action start 14:58:45: WiseStartup.
    MSI (c) (48:AC) [14:58:45:778]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'WiseStartup'
    MSI (c) (48:8C) [14:58:45:791]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI8E45.tmp, Entrypoint: Startup
    MSI (c) (48:B0) [14:58:45:793]: Cloaking enabled.
    MSI (c) (48:B0) [14:58:45:793]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (48:B0) [14:58:45:793]: Connected to service for CA interface.
    Action ended 14:58:45: WiseStartup. Return value 1.
    MSI (c) (48:AC) [14:58:45:926]: Doing action: LaunchConditions
    Action start 14:58:45: LaunchConditions.
    Action ended 14:58:45: LaunchConditions. Return value 1.
    MSI (c) (48:AC) [14:58:45:927]: Doing action: SetDLLDIR
    Action start 14:58:45: SetDLLDIR.
    MSI (c) (48:AC) [14:58:45:927]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SetDLLDIR'
    MSI (c) (48:AC) [14:58:45:927]: PROPERTY CHANGE: Adding DLLDIR property. Its value is '{467D5E81-8349-4892-9E81-C3674ED8E451}'.
    Action ended 14:58:45: SetDLLDIR. Return value 1.
    MSI (c) (48:AC) [14:58:45:927]: Doing action: SetDLLLOC
    Action start 14:58:45: SetDLLLOC.
    MSI (c) (48:AC) [14:58:45:927]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SetDLLLOC'
    MSI (c) (48:AC) [14:58:45:927]: PROPERTY CHANGE: Adding DLLLOC property. Its value is 'C:\Users\ANDREA\AppData\Local\Temp\{467D5E81-8349-4892-9E81-C3674ED8E451}\'.
    Action ended 14:58:45: SetDLLLOC. Return value 1.
    MSI (c) (48:AC) [14:58:45:927]: Doing action: CsCa_CopyInstHelperDll
    Action start 14:58:45: CsCa_CopyInstHelperDll.
    MSI (c) (48:AC) [14:58:45:928]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CsCa_CopyInstHelperDll'
    MSI (c) (48:DC) [14:58:45:939]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI8EE2.tmp, Entrypoint: f0
    MSI (c) (48!40) [14:58:45:960]: PROPERTY CHANGE: Adding CsProp_CopyInstHelperDll property. Its value is '1'.
    Action ended 14:58:45: CsCa_CopyInstHelperDll. Return value 1.
    MSI (c) (48:AC) [14:58:45:961]: Skipping action: ClearDisableUAP (condition is false)
    MSI (c) (48:AC) [14:58:45:961]: Skipping action: CsCaErr_NTNotSupported1 (condition is false)
    MSI (c) (48:AC) [14:58:45:961]: Skipping action: CsCaErr_Win64BitNotSupported2 (condition is false)
    MSI (c) (48:AC) [14:58:45:961]: Skipping action: SetPatchMode (condition is false)
    MSI (c) (48:AC) [14:58:45:961]: Skipping action: SetPatchReinstallMode (condition is false)
    MSI (c) (48:AC) [14:58:45:961]: Doing action: CsCaDll_AreWeInstalled1
    Action start 14:58:45: CsCaDll_AreWeInstalled1.
    MSI (c) (48:AC) [14:58:45:961]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CsCaDll_AreWeInstalled1'
    MSI (c) (48:04) [14:58:45:972]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI8F02.tmp, Entrypoint: f2
    MSI (c) (48!C0) [14:58:45:997]: PROPERTY CHANGE: Adding CLIENT_INSTALLED property. Its value is '0'.
    Action ended 14:58:45: CsCaDll_AreWeInstalled1. Return value 1.
    MSI (c) (48:AC) [14:58:45:998]: Skipping action: CsCaDll_AreWeInstalled (condition is false)
    MSI (c) (48:AC) [14:58:45:998]: Skipping action: CsCaProp_SetLegacyClient2Unity (condition is false)
    MSI (c) (48:AC) [14:58:45:998]: Skipping action: CsCaDll_ClientAlreadyInstalledOnVista (condition is false)
    MSI (c) (48:AC) [14:58:45:998]: Doing action: Setup_Dialog
    Action start 14:58:45: Setup_Dialog.
    MSI (c) (48:AC) [14:58:45:999]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Setup_Dialog'
    Info 2898. For MSSansSerif8 textstyle, the system created a 'MS Sans Serif' font, in 1 character set, of 13 pixels height.
    Info 2898. For Arial10 textstyle, the system created a 'Arial' font, in 1 character set, of 16 pixels height.
    Info 2898. For Arial14 textstyle, the system created a 'Arial' font, in 1 character set, of 22 pixels height.
    Action ended 14:58:46: Setup_Dialog. Return value 1.
    MSI (c) (48:AC) [14:58:46:030]: Doing action: FindRelatedProducts
    Action start 14:58:46: FindRelatedProducts.
    MSI (c) (48:AC) [14:58:46:031]: Note: 1: 2262 2: Upgrade 3: -2147287038
    Action ended 14:58:46: FindRelatedProducts. Return value 1.
    MSI (c) (48:AC) [14:58:46:031]: Doing action: AppSearch
    Action start 14:58:46: AppSearch.
    MSI (c) (48:AC) [14:58:46:032]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (c) (48:AC) [14:58:46:032]: Note: 1: 2262 2: CompLocator 3: -2147287038
    MSI (c) (48:AC) [14:58:46:033]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DNE\Parameters\Order 3: 2
    MSI (c) (48:AC) [14:58:46:033]: Note: 1: 2262 2: IniLocator 3: -2147287038
    MSI (c) (48:AC) [14:58:46:033]: Note: 1: 2262 2: DrLocator 3: -2147287038
    Action ended 14:58:46: AppSearch. Return value 1.
    MSI (c) (48:AC) [14:58:46:033]: Skipping action: CCPSearch (condition is false)
    MSI (c) (48:AC) [14:58:46:033]: Skipping action: CCPDialog (condition is false)
    MSI (c) (48:AC) [14:58:46:033]: Skipping action: RMCCPSearch (condition is false)
    MSI (c) (48:AC) [14:58:46:033]: Doing action: ValidateProductID
    Action start 14:58:46: ValidateProductID.
    Action ended 14:58:46: ValidateProductID. Return value 1.
    MSI (c) (48:AC) [14:58:46:033]: Doing action: CostInitialize
    Action start 14:58:46: CostInitialize.
    MSI (c) (48:AC) [14:58:46:034]: Machine policy value 'MaxPatchCacheSize' is 10
    MSI (c) (48:AC) [14:58:46:035]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'C:\'.
    MSI (c) (48:AC) [14:58:46:036]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'.
    Action ended 14:58:46: CostInitialize. Return value 1.
    MSI (c) (48:AC) [14:58:46:036]: Doing action: FileCost
    Action start 14:58:46: FileCost.
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: RemoveFile 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: MoveFile 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: TypeLib 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: IniFile 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: ReserveCost 3: -2147287038
    Action ended 14:58:46: FileCost. Return value 1.
    MSI (c) (48:AC) [14:58:46:038]: Doing action: IsolateComponents
    Action start 14:58:46: IsolateComponents.
    MSI (c) (48:AC) [14:58:46:040]: Note: 1: 2262 2: BindImage 3: -2147287038
    MSI (c) (48:AC) [14:58:46:041]: Note: 1: 2262 2: IsolatedComponent 3: -2147287038
    MSI (c) (48:AC) [14:58:46:041]: Note: 1: 2205 2:  3: Patch
    Action ended 14:58:46: IsolateComponents. Return value 1.
    MSI (c) (48:AC) [14:58:46:041]: Doing action: CostFinalize
    Action start 14:58:46: CostFinalize.
    MSI (c) (48:AC) [14:58:46:041]: PROPERTY CHANGE: Adding OutOfDiskSpace property. Its value is '0'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding OutOfNoRbDiskSpace property. Its value is '0'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceAvailable property. Its value is '0'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceRequired property. Its value is '0'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceRemaining property. Its value is '0'.
    MSI (c) (48:AC) [14:58:46:042]: Note: 1: 2205 2:  3: Patch
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding TARGETDIR property. Its value is 'C:\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding WWWROOT property. Its value is 'C:\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding GAC property. Its value is 'C:\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding System16Folder property. Its value is 'C:\Windows\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding Drivers property. Its value is 'C:\Windows\system32\Drivers\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding WinSxS property. Its value is 'C:\Windows\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding ProfilesFolder property. Its value is 'C:\Windows\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding Cisco_Systems_VPN_Client property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems VPN Client\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding Cisco_Systems property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding CommonFiles64Folder.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding D64_CFDetNet.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\Deterministic Networks\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding D64_DNCF.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\Deterministic Networks\Common Files\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding D64_DNE.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\Deterministic Networks\DNE\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding CommonFiles64Folder.0525718E_E263_4E57_A46E_C584C25A7F93 property. Its value is 'C:\Program Files\Common Files\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding INSTALLDIR2 property. Its value is 'C:\Program Files (x86)\VPN Client\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding INSTALLDIR1 property. Its value is 'C:\Program Files (x86)\Cisco Systems\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding INSTALLDIR property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding updates property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\updates\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding TempInstall property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\TempInstall\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Resources property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Resources\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Profiles property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Profiles\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Logs property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Logs\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding include property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\include\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Certificates property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Certificates\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding accessible property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\accessible\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Setup property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Setup\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Languages property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Languages\'.
    MSI (c) (48:AC) [14:58:46:043]: Target path resolution complete. Dumping Directory table...
    MSI (c) (48:AC) [14:58:46:043]: Note: target paths subject to change (via custom actions or browsing)
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TARGETDIR    , Object: C:\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: WWWROOT    , Object: C:\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: GAC    , Object: C:\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: MyPicturesFolder    , Object: C:\Users\andrea\Pictures\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonAppDataFolder    , Object: C:\ProgramData\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: WindowsFolder    , Object: C:\Windows\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: System16Folder    , Object: C:\Windows\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TemplateFolder    , Object: C:\ProgramData\Microsoft\Windows\Templates\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: AdminToolsFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: System64Folder    , Object: C:\Windows\system32\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Drivers    , Object: C:\Windows\system32\Drivers\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: WinSxS    , Object: C:\Windows\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: SystemFolder    , Object: C:\Windows\SysWOW64\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: FontsFolder    , Object: C:\Windows\Fonts\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TempFolder    , Object: C:\Users\ANDREA\AppData\Local\Temp\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProfilesFolder    , Object: C:\Windows\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: AppDataFolder    , Object: C:\Users\andrea\AppData\Roaming\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: FavoritesFolder    , Object: C:\Users\andrea\Favorites\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: NetHoodFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: DesktopFolder    , Object: C:\Users\Public\Desktop\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: RecentFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Recent\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: StartMenuFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProgramMenuFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Cisco_Systems_VPN_Client    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems VPN Client\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: StartupFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Cisco_Systems    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: PersonalFolder    , Object: C:\Users\andrea\Documents\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: SendToFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\SendTo\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: PrintHoodFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: LocalAppDataFolder    , Object: C:\Users\andrea\AppData\Local\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProgramFiles64Folder    , Object: C:\Program Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFiles64Folder    , Object: C:\Program Files\Common Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFiles64Folder.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: D64_CFDetNet.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\Deterministic Networks\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: D64_DNCF.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\Deterministic Networks\Common Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: D64_DNE.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\Deterministic Networks\DNE\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFiles64Folder.0525718E_E263_4E57_A46E_C584C25A7F93    , Object: C:\Program Files\Common Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProgramFilesFolder    , Object: C:\Program Files (x86)\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFilesFolder    , Object: C:\Program Files (x86)\Common Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: INSTALLDIR2    , Object: C:\Program Files (x86)\VPN Client\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: INSTALLDIR1    , Object: C:\Program Files (x86)\Cisco Systems\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: INSTALLDIR    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: updates    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\updates\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TempInstall    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\TempInstall\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Resources    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Resources\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Profiles    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Profiles\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Logs    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Logs\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: include    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\include\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Certificates    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Certificates\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: accessible    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\accessible\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Setup    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Setup\
    MSI (c) (48:AC) [14:58:46:044]: Dir (target): Key: Languages    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Languages\
    MSI (c) (48:AC) [14:58:46:045]: Note: 1: 2262 2: RemoveFile 3: -2147287038
    Action ended 14:58:46: CostFinalize. Return value 1.
    MSI (c) (48:AC) [14:58:46:045]: Doing action: MigrateFeatureStates
    Action start 14:58:46: MigrateFeatureStates.
    Action ended 14:58:46: MigrateFeatureStates. Return value 0.
    MSI (c) (48:AC) [14:58:46:047]: Doing action: SetWizardProperty1
    Action start 14:58:46: SetWizardProperty1.
    MSI (c) (48:AC) [14:58:46:048]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SetWizardProperty1'
    MSI (c) (48:AC) [14:58:46:048]: PROPERTY CHANGE: Adding WiseCurrentWizard property. Its value is 'Welcome_Dialog'.
    Action ended 14:58:46: SetWizardProperty1. Return value 1.
    MSI (c) (48:AC) [14:58:46:048]: Doing action: Welcome_Dialog
    Action start 14:58:46: Welcome_Dialog.
    MSI (c) (48:AC) [14:58:46:049]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Welcome_Dialog'
    MSI (c) (48:2C) [14:58:46:068]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
    MSI (c) (48:2C) [14:58:46:068]: Note: 1: 2262 2: ReserveCost 3: -2147287038
    MSI (c) (48:2C) [14:58:46:068]: Note: 1: 2205 2:  3: _RemoveFilePath
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: TypeLib 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: PROPERTY CHANGE: Modifying CostingComplete property. Its current value is '0'. Its new value: '1'.
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: BindImage 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: ProgId 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: PublishComponent 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: SelfReg 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Font 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: PROPERTY CHANGE: Modifying PrimaryVolumeSpaceAvailable property. Its current value is '0'. Its new value: '60293640'.
    MSI (c) (48:2C) [14:58:46:077]: PROPERTY CHANGE: Modifying PrimaryVolumeSpaceRequired property. Its current value is '0'. Its new value: '50274'.
    MSI (c) (48:2C) [14:58:46:077]: PROPERTY CHANGE: Modifying PrimaryVolumeSpaceRemaining property. Its current value is '0'. Its new value: '60243366'.
    MSI (c) (48:2C) [14:58:46:077]: PROPERTY CHANGE: Adding PrimaryVolumePath property. Its value is 'C:'.
    MSI (c) (48:6C) [14:58:46:746]: Doing action: WiseNextDlg
    Action start 14:58:46: WiseNextDlg.
    MSI (c) (48:6C) [14:58:46:746]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'WiseNextDlg'
    Action ended 14:58:46: WiseNextDlg. Return value 3.
    DEBUG: Error 2896:  Executing action WiseNextDlg failed.
    Internal Error 2896. WiseNextDlg
    Action ended 14:58:46: Welcome_Dialog. Return value 3.
    MSI (c) (48:AC) [14:58:46:753]: Doing action: Fatal_Error
    Action start 14:58:46: Fatal_Error.
    MSI (c) (48:AC) [14:58:46:754]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Fatal_Error'
    MSI (c) (48:6C) [14:58:47:418]: Doing action: WiseCleanup
    Action start 14:58:47: WiseCleanup.
    MSI (c) (48:6C) [14:58:47:418]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'WiseCleanup'
    MSI (c) (48:40) [14:58:47:445]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI94AE.tmp, Entrypoint: Cleanup
    Action ended 14:58:47: WiseCleanup. Return value 1.
    Action ended 14:58:47: Fatal_Error. Return value 2.
    Action ended 14:58:47: INSTALL. Return value 3.
    MSI (c) (48:AC) [14:58:47:467]: Destroying RemoteAPI object.
    MSI (c) (48:B0) [14:58:47:487]: Custom Action Manager thread ending.
    === Logging stopped: 13.10.2010  14:58:47 ===
    MSI (c) (48:AC) [14:58:47:488]: Note: 1: 1708
    MSI (c) (48:AC) [14:58:47:488]: Product: Cisco Systems VPN Client 5.0.07.0290 -- Installation operation failed.
    MSI (c) (48:AC) [14:58:47:489]: Windows Installer installed the product. Product Name: Cisco Systems VPN Client 5.0.07.0290. Product Version: 5.0.7. Product Language: 1033. Manufacturer: Cisco Systems, Inc.. Installation success or error status: 1603.
    MSI (c) (48:AC) [14:58:47:491]: Grabbed execution mutex.
    MSI (c) (48:AC) [14:58:47:491]: Cleaning up uninstalled install packages, if any exist
    MSI (c) (48:AC) [14:58:47:493]: MainEngineThread is returning 1603
    === Verbose logging stopped: 13.10.2010  14:58:47 ===

  • Cisco VPN Client is not opening on windows 7 64bits

    Hello,
    My problem : i instaled Cisco VPN client 5.0.07.0440-k9 on Windows 7  64 bits, the installation ends successfully. But when i restard the computer, when i click it doesnt open.
    Notice : when i restard the computer, it takes an infinite time the first rebooting ,  in the final stage of boot ( The black window with the Microsoft logo and  message Windows Is Starting ...)  '' it takes an infinite time so i force the reboot.
    started the same thread here but no answer yet.
    Thank you

    check your event viewer/System log.   You may see some entries stating that
    "The Cisco Systems Inc. IPSec Driver failed to start due to the following error: Windows cannot verify the digital signature for this file."
    disable digital signatures (NOT recommended) and cisco works fine
    I guess Cisco has already killed this program if they aren't even getting it certified.

  • Cisco VPN client can't ping remote network.

    I have recently installed a Cisco 5505 and have problems with some of the Cisco VPN Hosts I connect to using the Cisco VPN dialer. The Cisco Dialer connects fine but I am unable to connect to any computers on the remote network.
    I have tracked the issue down to the ones that work & the ones that don't. If the remote Cisco is on the same sub-net as the computers I am connecting to it works fine. If the remote Cisco is on a differant sub-net then the computer I am trying to connect to it won't work unless I set up a static nat for a given pc on my network.
    When I run through the dynamic Nat for my network I get the following error on the 5505.
    regular translation creation failed for protocol 50 src inside:192.168.97.215 dst outside:xx.xxx.xx.xxx
    I have been trying to find a solution to this issue ever since I installed the router and have not had any luck with any of the suggestions I have found on the Web. I have attached my config.
    Any help would be appreciated.
    Mike

    Thanks for your response.
    Yes that exactly the setup we are trying to get to work.
    I have a call into them now and will check on their set up but I have no control over how they configure their routers I can only make requests.
    I was hoping there was something causing it on my side as I deal with Hospitals and they can get very picky about their security.
    I guess what is confusing me is it works if it goes through a Static Nat but not if it runs through our dynamic Nat.
    Mike

Maybe you are looking for

  • How to move a widget from one section to another

    Hi, I try to move a widget from a page of a section to another page by using copy and paste but it doesn't work. I hear only a short sound, when I press cmd+v. I think it must be possible to move widgets to other places or to copy them. Please help m

  • Forcing Face Detection for All Pictures in an Event

    Aperture 3.0 fails to detect all faces in all photos in an Event. Is there a way to force face detection for all photos in an Event? As it stands now, one cannot tag photos for faces if Aperture decides (erroneously) that photos don't contain a face.

  • Removing horizontal scroll bar from iframe

    how can i remove the horizontal scroll bar from an iframe when the contents does not need one.

  • LEA IN 4.7E and ECC 6.0

    Hi All, In our project LEA is in 4.7E R/3 and CRM is in seperate platform. We have to decouple that connection b/w 4.7E R/3 and CRM, we have to upgrade that r/3 to ECC 6.0. and then we have to couple the ECC6.0 and CRM. Now there is any difference in

  • Problem with embedded OLE objects

    I am using Outlook as client. I sent mail with Excel table as embeddet object. Outlook can after what read and show this mail. But if I read this mail with SOAP I get a message body without Excel table. I thought it should be in attachment. hasAttach