Cisco VPN no longer working after firmware update

I have been using the Cisco VPN network connection to access work; after the recent update, both my Macs stopped working -- no changes have been made.
Is this a known bug? I looked at the settings, verified everything with no luck.
Thanks.

See http://discussions.apple.com/thread.jspa?messageID=12800407&tstart=0. If you want to report this issue to Apple's engineering, send a bug report or an enhancement request via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

Similar Messages

Airport no longer working after firmware update

Before i get to my question, i think that it is necessary to give a bit of background as to why i have set my network up the way i have.
I recently moved in with my girlfriend and brought my broadband package with me as i would have to pay a fee to cancel my contract within the contract period.
This would be all well and good except that in the new location, the service provider can only supply broadband via an ADSL phone line (provided by a seperate telephone company) furthermore they (Virgin Media - i'm gonna name names) provide a cheap USB only modem - which in turn is only compatible with PPC Macs.
Fine for me, but not so great for my girlfriend who has an Intel Mac Mini and not so great for my new Airport Extreme which of course requires a modem with an ethernet connection.
Bearing in mind that it's just after Christmas and i can't afford to just run out and buy an ethernet modem or change my ISP - i thought that i would try something out.
With the USB modem connected to my old PPC G4 i then connected the ethernet cable (that i had connecting our two Macs allowing them to share the internet connection) - from my G4 to the WAN port on the Airport...
Now i'm a real networking newbie so i was a little suprised when suddenly and effortlessly i had created a wireless network that the Mac Mini and our iPod Touches could see and use. I set up security etc and all was well and good...for two days.
Then Airport received a firmware update and now it doesn't work and resetting the Airport doesn't help.
So now i have to get my hands dirty and like i say, i know jack about networks or the terminology.
With this configuration - and obviously we know that it can work (somehow!)
should i be in bridge mode or sharing a single IP address? and just how am i connecting to the internet. Static IP address/DHCP - PPPoE? I know what these abbreviations stand for but i don't know what they mean.
In the course of 'playing around' with the settings i have seen a message saying that Airport has an invalid I.P. address - why is it invalid and is that only because of something that i have changed or is that the route of the problem?
All the machines can see each other and the only clue i can provide is this log extract.
Jan 19 01:05:31 Severity:5 Initialized (firmware 7.2.1).
Jan 19 01:05:34 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jan 19 01:05:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:34 Severity:5 Rotated TKIP group key.
Jan 19 01:05:42 Severity:5 (WAN) link state is Up.
Jan 19 01:05:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:54 Severity:5 Associated with station 00:1d:4f:e3:87:17
Jan 19 01:05:54 Severity:5 Installed unicast CCMP key for supplicant 00:1d:4f:e3:87:17
Jan 19 01:06:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49186.
Jan 19 01:06:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:08 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49187.
Jan 19 01:07:09 Severity:5 Configuration updated.
Jan 19 01:07:09 Severity:5 unloading current configuration.
Jan 19 01:07:17 Severity:5 Deauthenticating with station
...and so on.
I'm hoping that some networking guru is reading this and can provide me with a few pointers.
Can anyone help? I've been struggling with this for days now.
Thanks in advance.
Steve.

Your setup is convoluted, but it should work. A few comments:
1. The base station should be configured to get an IP address using DHCP, which it will get from your PPC which (with internet connection sharing turned on) is now acting as a DHCP server.
2. The base station should be configured in bridge mode, since your PPC (with intenet connection sharing turned on) is now acting as a router.
3. I suggest you should turn off the network firewall on the PPC as long as your are running this sort of setup. Not ideal, but it will prevent all sorts of connectivity problems between the internet and everything downstream of your PPC's ethernet port.

IPhone 4 - Pioneer Speaker System No Longer Works After Firmware Update

To Whom It May Concern,
I recently updated the firmware on my iPhone 4 from 4.1 to 4.2.1. Unfortunately, as soon as I did that my Pioneer (XW-NAV1K-K) Speaker System no longer works with my iPhone. Are there plans on correcting this in the next firmware?

Me again, THANKS FOR HE TALENS well it kind of worked, but I had one chance and have not seen it since but all the root, or iCloud, basically all keychains might have been rest to defaults, but if I try a password, it hakes and says incorrect, the apple id worked though?!?
NIGHTMARE AND NEED THI FOR WORK, last backup (from apples time machine, not sure how old.
Your or anyones HELP! is greatly appreciated!

My cisco vpn no longer works with Lion

After installing Lion, my cisco vpn no longer works. If I force boot in 32 bit mode it works fine, so appears to be a cisco client issue. Does anyone know if CISCO is working on 64bit client compatible with Lion?

Not sure this answer helps me or anyone else. My VPN connection no longer works in Lion. How do I re-set the parameters of my VPN connection to work in Lion?
Below is what my VPN screen look like:

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

Zap the PRAM and Reset the SMC, then try again.

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]

Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

VPN no longer working after upgrade to Mountain Lion

After upgrading to Snow Leopard, the Cisco VPN client stopped working.   This was due to the fact it ran in 64-bit, but SL allowed you to switch to 32bit which then the app still worked.
You also had the choice of using the MacOS 'VPN' program, but it always disconnected quite often for me.
After the upgrade, the Cisco VPN client no longer works at all, I assume again due to the fact 32bit is no longer around, however the Mac VPN client no longer works either. It will connect, however no traffic goes over the VPN (it gets blackholed) rendering it useless.
I have this behavior on multiple Macs, so I'm not sure if this is a known issue, or if the Mac VPN client no longer plays nice with the Cisco ASA firewalls?

It appears that ML no longer supports 32bit applications at all.
Therefore, you have 2 options:
1) Use the built in VPN client, you will need your IT's help for this as it requires the group name and password of your VPN server.   You can configure it by going to System Preferences -> Network and 'adding' an VPN (Cisco IPSec) interface.   I haven't had much luck with it, it works sometimes and sometimes it fails, but other people swear by it.
2) Move over to the Cisco AnyConnect VPN client, which does support 64bit. This will also require your IT department as they need to configure the SSL/AnyConnect VPN on the VPN device itself.   I went to this method yesterday and it's worked out great so far.

Md5 reborned hasher 0.9.0 no longer works after firefox update to version 20 ,redesigned download box doesn't give option

md5 reborned hasher which has worked previously no longer works after update to FF version 20 . the redesigned download box doesn't give the option to use the hasher.

If you use this add-on a lot, you might want to switch back to the old style download manager until the add-on's author can bring it up to date. This thread describes how to make the switch: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box, the new one has no history and doesn't show speed of download, how do I go back?]

Headphones no longer work after ios8 update to Iphone 5

My plug in head phones no longer work after updating to IOS8. I thought it was the head phones and bought new ones - they don't work either. I updated my iPad and both head phones work. Phone is IPhone 5 - not due for an upgrade until December. Any suggestions?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

N95 Map stop working after firmware update

I have the N95, just update the firmware with the latest (04/25/09), the map App stop working today… it work after the update… it will not load and when I try to reload the map to the phone via Map loader it sees the phone the says it can’t read the license information…
Need help please.

have u tried reinstalling the maps application?
u can get the latest maps application update from http://www.nokia.com/maps
download the application associated with ur n95 and install it using the pc suite application
if my post helped u out, please click the Star next to it to add some KUDOS to my name

Standard PCI to PCI bridge no longer working after BIOS update

Hey everyone,
Before I get into the details of what is probably the most frustrating computer problem I have ever faced I would first like to say hello because this is my first post and I give you my system specs.
Windows 7 ultimate x64
GA-M61PME-S2P (rev 1.0) MOBO
2x 120GB Mushkin SSD @3.5gbps Raid 0
AMD Phenom II x4 @2.2 GHZ (Old processor that I replaced)
AMD Phenom II 1090T x6 @ 3.2GHZ (New processor that replaced the Phenom x4)
MSI Cyclone GTX 550 TI OC (Nvidia)
8 Gigs 800mhz DDR2 RAM (Computer Bay)
I have had a GA-M61PME-S2P (rev 1.0) board for several years now and have never had any problems. I recently bought a brand new AMD phenom II x6 1090T processor because it was listed as being supported by my board. The BIOS version that I had installed before purchasing this processor (version F5) was unable to recognize my new processor and boot so I had to update to the latest version (version F7b). After flashing my BIOS with the new version I was able to boot and my computer recognized my processor with the correct name and clock speeds. Unfortunately it now no longer recognizes one of my standard PCI to PCI bridges. Of the two standard PCI to PCI bridges listed in device manager one of them has a yellow exclamation point and reads "error code 35 firmware does not contain enough info to configure this device". I have tried everything I can think of but just cant seem to get my processor and graphics card to work under the same BIOS version. I will now list every step I have taken;
1.) I have re-flashed several times between versions F5 and F7b but always get the same results
2.) I have used Driver cleaner in safe mode to wipe all drivers and then double checked programs and features to make sure nothing was still installed.
3.) I have installed all drivers for the board from Gigabytes website, although when I try to install the VGA driver i get an error saying that no device could be found that supports the driver.
4.) I once again wiped everything in safe mode and then found the latest chipset drivers for nvidia Nforce from NVidia's site but got the same results.
5.) I tried downloading the F7b BIOS from some random website just in case the file from Gigabyte was somehow broken but this did not change anything. (I know that's generally a bad idea but I am desperate)
6.) I uninstalled the problem standard PCI to PCI bridge in device manager and restarted my computer but got the same results.
7.) I tried installing my graphics card drivers from MSI but got an error saying that no supported hardware could be found.
8.) I tried installing a number of different versions of the Nvidia graphics card drivers for my series but kept getting that same error message
9.) I downloaded the Graphics card detector program that NVidia provides on their site but it told me that it could not detect my graphics card.
10.) I tried Flashing my BIOS to the F6 version for the rev 1.3 board but this turned out to be a huge mistake because my computer would no longer post after this and I had to use a FAT32 flash drive and the q-flash utility to bring it back to life.
11.) I checked over and over and over again that my BIOS settings were right and nothing was setup to only use on-board graphics.
12.) I tried downloading a driver that was supposedly for the PCI to PCI bridge but im fairly sure this was just a trojan because the install did not complete and I found tons of fun plugins installed afterwards (I reformatted shortly after this).
13.) I made sure that my new processor was plugged in and that my BIOS was version F7b and then completely wiped my hard drive and re-installed windows 7 ultimate x64 but got the same results.
14.) I made a bootable DOS flash drive and tried updating my Graphics card BIOS but found that I already have the latest version.
What I don't understand is that my graphics card works perfectly with BIOS version F5 and my processor works perfectly with BIOS version F7b but under no circumstance do they both work at the same time. It may be worth noting that with version F7b installed I am still able to use my graphics card ( my Monitor is plugged into it via DVI) It just gives me the error under device manager and I can not install any drivers.
If anyone out there can help me I will be insanely grateful and will refer to you from then on as the master of all things MSI. I'm at my wits end, If you need any further info just ask and I will provide.

Ah ok I was afraid you were going to say that. I will take this to gigabyte then but just so I know, This PCI to PCI bridge problem couldn't have anything to do with my MSI graphics card BIOS somehow not being compatible with the Gigabyte BIOS?
-Thank you!

Cisco VPN no longer works - on 2 machines

Hello all -
I had been successfully running Cisco VPN 4.9.01 (0030) to connect to my work computer from 2 Macs at home after freshly installing Leopard on both of them, but now I cannot connect from either Mac. I also tried installing 4.9.01 (0080) but run in to the same problem. As far as I can tell, it stopped working on Wednesday night or Thursday morning - but I don't recall any software updates that might have caused the problem. My IT people assure me that it should work...
Anyone having a similar issue?
Thanks in advance!
Justin

The issue was with my tech department after all...

Itunes no longer works after latest update

I updated the latest version of iTunes. Now, it no longer works. Then my computer told me to update the latest version, so tried again, but again it didn' work. So in uninstalled iTunes and tried to install it again. It didn't work. I even tried with an older update after I had deleted the latest one and it didn't work. Now my computer tells me that some file or stuff was missing.
Thanks for any help!

...now my computer updated it again. It opened, tried to collect information about the copyright, the an error message popped up saying that iTunes does not work correctly due to any mistake...
Please help me!

IPhone remote app no longer working after iPhone update to version 4.2.1

I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
"Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
Home sharing is enabled on all the Apple TV devices
I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
Suggestions ?

Update:
Issue is still occuring, after resetting wireless router.
Router: Netgear WNDR3400, SSID's turned off, WMM is enabled.

Security not working after firmware update

I have a WRT610N (v2) router and I recently updated the firmware to the most current version 2.00.01 build 15. I can no longer set WPA2 security for both bands (used to work just fine). Every time I try to save settings for WPA2 for the 5 GHz band, it tells me it was successful but then displays that the security mode is disabled (and it shows up on my computers list as not having any security enabled. Is there a fix for this? If not, where can I get a copy of the old firmware that worked?

I'm on a Mac (normally) and have tried Chrome & Safari and then run Win7 via bootcamp and have tried IE. No change. None work. I also tried the reset again (hold down the reset button for 45 seconds) and start from scratch to reconfigure - that didn't work either.
Still can only P/W protect 1 of the 2 bands using WPA2 personal. Each band has a different name and I've tried the same P/W or require different P/W, neither works.
One update though. If I set one band to WPA2-AES and the other band to AES, it works. But not if both are set to the same encryption scheme.

Cisco VPN no longer working after firmware update

Similar Messages

Maybe you are looking for