Cisco VT Advantage with IP Communicator

Trying to use VTA with Communicator 2.0(1). When I click on the Video Icon on Communicator, the following message appears "Cisco Video Advantage version 2.0(1) is required to work with Communicator 2.0(1). I can't find VTA 2.0(1) on Cisco's site. Is this error message correct?
Thanks!
joe

Dear All
yes IP communicator 2.0 supports Video telehpony
refer link below more details , it works
http://www.cisco.com/en/US/products/sw/voicesw/ps5662/products_data_sheet0900aecd8044de04.html
regards
lalit

Similar Messages

Using Video advantage with IP Communicator on CME 4.0

I am having issues getting video advantage to work with IP communicator. I am using VA 2.0.2.0 and IPC 2.0.2.0 and CME 4.0. I added the commands
voice service voip
h323
call start slow
telephony-service
service phone videoCapability 1
call-park system redirect
create cnf-files
and added the video command under the ephone. If you have any suggestions I would appreciate it.
Thanks,
Andrew

Paal
I am not using Call Manager. I am using Call Manager Express. There is no version 4.1 the documentation says that it should work with 4.0. that is the latest version of CME. Do you have any insight on this.
Thanks,
Andrew

CIsco UCS-C200M2 with Unified Communication Products

Hi,
If anybody knows what are the Unified Communication products we can install on Cisco UCS solution with EXS VMware ESXi 4.0 Standard Edition.
If any other products pls let me know that alo.
Thanks in Advance.
Regards,
Sunish

Yes, the DocWiki covers this on the Supported Applications page. It is worth mentioning that only there are specific hardware component requirements of the C200M2 for VTG support.
Please rate useful responses.

Cisco VT Advantage web camera with Logitech

Hi.
i have one question.
we almost use VT Advantage with cisco web camera.
but my customer want other camera,,
so we can use VT Advantage with other Web Camera?
plz answer me or Link Page..
bye

Hi Jang,
Supported USB Cameras
Cisco Unified Video Advantage supports these USB cameras:
•Cisco VT Camera III (see Important Upgrade Information for Cisco VT Camera III)
•Cisco VT Camera II
•Logitech QuickCam Fusion
•Logitech QuickCam for Notebooks Pro
•Logitech QuickCam Pro 9000
•Logitech QuickCam Ultra Vision
•Microsoft LifeCam VX-6000
•Microsoft LifeCam NX-6000 Webcam
•Microsoft Lifecam HD (720p)
•Creative Webcam Live Pro USB 2.0 Webcam (see Important Notes)
•Tandberg PrecisionHD
http://www.cisco.com/en/US/docs/video/cuva/2_2/english/release/notes/relnote_cuva22.html#wp1118706
Cheers!
Rob

Cisco VT Advantage 2.0

Hi,
I recently purchased half a dozen CVT-ADV-E1 USB Camera's. The Cisco site claims that the software is included.
However the camera's did not come with the Cisco VT Advantage 2.0 software that I need in order to work the IP Communicator version 2.
Does anyone know how one goes about obtaining this software.
Regards
Miron du Plessis

Version 2.0(1)a is there now.
See the Release Notes:
http://www.cisco.com/en/US/products/sw/voicesw/ps5662/prod_release_note09186a00806a84f3.html

Cisco WLC 5508 with 3702APs - mobile hotspot for 2000 Guest users

Cisco WLC 5508 with 3702APs - mobile hotspot for 2000 Guest users
I've been given a fantastic "opportunity" by my boss to use our existing wireless infrastructure to provide internet access to potentially upto 2000 VIP guests arriving with BYOD devices, in a very densely populated area for a 3 day event. We are talking an area of approx 200m x 15m. Think of it as an awards ceremony/concert. The solution will also be mobile so we will be using internet breakout from different telcos as it will move to approx 20 countries. The area is also incredibly densely populated with other wifi APs. I did a brief site survey and AirMagnet could detect over 2500 other 'rogue' APs from where I was stood! I hope CleanAir works!
We need a simple authentication method for them to connect with zero admin from our side. We don't want to just offer up a rolling daily PSK as that's a bit amateur and we don't really want the VIP guests sharing the PSK with others during their stay. Ideally they could self-provision by providing an email address.
I know the WLC can handle webauth for local users but I don't think it scales very well. ie I don't think I can offer the account to several hundred people.
Cisco ISE looks a very expansive (and expensive) product but I don't think we need all it's capabilities (do I?). It would be nice to just ask a potential user for their email address and grant them access and email them next year. I've seen Cisco NAC but that looks over the top too for just guest users who will only be accessing a shared internet connection.
I've seen 3rd party supposed software solutions from Kiosk Antamedia etc do they work with Cisco Enterprise WLC solutions?
We'd like to limit users to a certain (low) bandwidth and block (say) torrent traffic to keep the general user experience worthwhile.
Does anybody have any case study documents or experience of such a project? As well as the authentication it's how well the APs will handle the dense potential number of clients trying to connect in such a confined space.
Any suggestions would be gratefully appreciated from the knowledgeable community.
Cheers,
Mike

Hi Rasika,
We are having WLC 5508 model with software version running 7.4.121.0. AP Models are AIR-CAP2602I.
Normally our WAN links are good even while the issue pertains. We are connected to remote offices over ipsec site to site vpn for WAN. The link latency in WLC between the AP and the controller shows <1ms.
currently the Guest network is using WPA2-PSK auth given in the controller. we are trying to find a option to make the Guest wireless auth local to the office, and see if this solves the problem.
any suggestions,
Thank you,
Arjun

Why should I register with the community?

Just for reference ...

Registering lets you take full advantage of the community, enabling you to: Post new messages and reply to other members' postsReceive email when someone responds to a specific post or topicExchange private messages with other membersPersonalize your community experiencePost comments on blogs that don't allow anonymous commentsPost ideas, vote on the ideas you like best, and post commentsIf you don't register, you can only browse, search for information, and read posts. You won't be able to give kudos, vote on ideas, interact with other community members, or set customization preferences. Sourced from : FAQ

ASA , Cisco VPN client with RADIUS authentication

Hi,
I have configured ASA for Cisco VPN client with RADIUS authentication using Windows 2003 IAS.
All seems to be working I get connected and authenticated. However even I use user name and password from Active Directory when connecting with Cisco VPN client I still have to provide these credentials once again when accessing domain resources.
Should it work like this? Would it be possible to configure ASA/IAS/VPN client in such a way so I enter user name/password just once when connecting and getting access to domain resources straight away?
Thank you.
Kind regards,
Alex

Hi Alex,
It is working as it should.
You can enable the vpn client to start vpn before logon. That way you login to vpn and then logon to the domain. However, you are still entering credentials twice ( vpn and domain) but you have access to domain resources and profiles.
thanks
John

Problem With Receiver Communication (File Adapter)

Hi,
My SAP XI Version is 3.0 with Service Pack 7,I have a strange problem,
I have a flat file coming from Unix system,I need to convert this into XML and put a copy in the Archive mode and send the XML file,getting it converted into flat file format send it to the receiver.Here I have to do the content Conversion,So,I have done content conversion while configuring Sender and Receiver Communication Channel.
I am using NFS as Transport Proctocol.So, everthing was fine when i run the scenario,after activating.The Sender communication Channel is Archiving the files.But I am unable to see any file with receiver communication channel.
So,for this I have checked up with Adapter monitoring in Runtime Workbench. In my File Adapter My Sender as well as Receiver Communication Channels are in Green.They are mentioning that Sender Communction is sucessful and
RECEIVER COMMUNICATION IS Sucessful but no messages processed.
Can any one suggest what to do now.Everything is fine with Content conversion and Unix System.But my receiver is not receiving any messages.
Should any OSS notice or patch work needs to be applied.
Thank You,
KishoreJ.

Hi Kishore,
I Guess you should first see if the file is being picked......for that do the following.
While configuring your Sender File Adapter, let the mode be DELETE. This way, we will know if the file is being picked by the File adapter. The file will be deleted and you can be sure that it has been picked up.
Next, look into the RWB--> FILE ADAPTER and see the log of the file adapter
and also, you can see the flow of your message in the integration engine in SXMB_MONI.
Ans still if your message is not showing up in SXMB_MONI, please do as explained below.
Increase logging and trace level in:
SXMB_ADM -> Integration Engine Configuration -> Specific Configuration
Also create entries as follows in it:
LOGGING = 1
LOGGING_SYNC = 1
TRACE_LEVEL = 3
TRACE_LEVEL_PROPAGATION = 1
Also refer XI: I cannot see some of my messages in the SXMB_MONI
Regards,
Abhy

BT Infinity modem problem with Kelly Communication...

Hi all,
I am using Unlimited BT Infinity 1 (just for one month). I just received a call from a mobile phone regarding my broadband modem. He said he is from Kelly and there is something wrong with my broadband equipment. He is going to send an engineer to my home to change something (like taking the modem back?).
I searched on the forum and found a post about "Infinity Modem Swap & Kelly Communications" but that's about 1 year ago. In this post (http://bt.custhelp.com/app/answers/detail/a_id/37051/) it said:
"We've been working with Kelly Communications to replace the Openreach modems for some BT Infinity customers. We've now finished this work."
anyone else gets the call? not sure if it is a genuine contacts because they didnt even veryfy any account detail (but he said he knows my address).
Cheers
Chris

It could be that they have used an old modem and are going to swap it.
You could try calling BT to see if the know anything about it.
If they do come to your house make sure you verify their details and check ID card and stay with them when they change the modem over. If at all in doubt don't let them in.
If they telephone again and ask to check your computer do not let them. They have no need to do that.

Cisco ISE FlexAuth with 802.1X PCs and IP Phones as MAB multi-domain Q?

Cisco ISE FlexAuth with 802.1X PCs and IP Phones as MAB multi-domain Q?
Im trying to follow the trustsec 2.1 guide on IP Phones into LowImpact mode.
I can get a PC on its own to authenticate via dot1x/tls
I can get a Cisco IP Phone on its own to authenticate via MAB.
When the two are on the same switchport, the phone will authenticate but not the PC. ISE logs EAP timeouts.
The switchport has the LowImpact port ACL of
ip access-group ACL-DEFAULT in
The IP Phone gets a dACL that allows it ok.
I assume MAB phone and dot1x PC is supported? Any ideas?
Thanks in advance.

The ISE log detailed steps are as follows:
Steps
11001 Received RADIUS Access-Request
11017 RADIUS created a new session
Evaluating Service Selection Policy
15048 Queried PIP
15048 Queried PIP
15004 Matched rule
11507 Extracted EAP-Response/Identity
12300 Prepared EAP-Request proposing PEAP with challenge
12625 Valid EAP-Key-Name attribute received
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
12501 Extracted EAP-Response/NAK requesting to use EAP-TLS instead
12500 Prepared EAP-Request proposing EAP-TLS with challenge
12625 Valid EAP-Key-Name attribute received
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
12502 Extracted EAP-Response containing EAP-TLS challenge-response and accepting EAP-TLS as negotiated
12800 Extracted first TLS record; TLS handshake started
12805 Extracted TLS ClientHello message
12806 Prepared TLS ServerHello message
12807 Prepared TLS Certificate message
12809 Prepared TLS CertificateRequest message
12505 Prepared EAP-Request with another EAP-TLS challenge
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
12504 Extracted EAP-Response containing EAP-TLS challenge-response
12505 Prepared EAP-Request with another EAP-TLS challenge
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
12504 Extracted EAP-Response containing EAP-TLS challenge-response
12505 Prepared EAP-Request with another EAP-TLS challenge
11006 Returned RADIUS Access-Challenge
5411 No response received during 120 seconds on last EAP message sent to the client

Integration of CISCO PRIME1.3 with WLC 7.5.102.0

HI
We have newly depolyed CISCO PRIME1.3 in our network Earlier we were using WCS withj WLC 7.0.116.0 .BUt we can not upgrade the WLC to higher version because of compatibity matrix with WCS therefore purchased CISCO PRIME1.3.
Now e we want to upgrade our WLC to 7.5.102.0 but as per cisco complatibity matrix with PRIME it is not supported with PRIME1.3.
Can we go for the upgarde when we have PRIEM1.3.PRIEM is installed on VM.
1.3.0.20
7.4.110.0
7.4.100.60
7.4.100.0
7.3.112.0
7.3.101.0
7.2.111.3
7.2.110.0
7.2.103.0
7.0.240.0
7.0.235.3
7.0.235.0
7.0.230.0
7.1.91.0
7.0.220.0
7.0.116.0
7.0.98.218
7.0.98.0
7.4.110.0
7.4.100.0
7.3.101.0
7.2.110.0
7.2.103.0
7.0.240.0
7.0.230.0
7.0.220.0
7.0.201.204
7.0.112.0
7.0.105.0
ISE 1.0
ISE 1.1
3.2.0SE
IOS12.2(50)SE
IOS12.2(50)SG
IOS12.2(33)SXI
If deploying Prime Infrastructure as a virtual appliance on a customer-supplied server, one of the following versions of VMware ESX or ESXi can be used:
•VMware ESX or VMware ESXi Version 4.0
•VMware ESX or VMware ESXi Version 4.1
•VMware ESXi Version 5.0
Note VMware Tools Version 4.1 is preinstalled in the Prime Infrastructure virtual appliance.

Please upgrade your PI to Pi 1.4 if you want to use WLC 7.5
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.4/release/notes/cpi_rn_14.html

Server with secure communication unavailable?

When I try to sync my iCal with my Gmail account, iCal gives me an error that says "Server with secure communication unavailable"
My accounts were linked just fine before and this just started up one day.
Any thoughts?

I get the same error except when I try to add my MobileMe account. I just upgraded my Air with Lion 10.7.2. Anyone know how to pull my MobileMe calendars back onto Lion?

Help with Nokia Communicator 9500 Backup Files - N...

Greets,
I have come to a realzation that a vital piece of information may be within some old Nokia Communicator Backup Files. I of course don't have the phone, I also had several Communicator Phones, and I believe I may have more
backup files from those, which may also contain the info.
I of course, haven't had the phones for years...
Am I able to use any Nokia or 3rd Party Software to work with the Communicator Backup Files and extract data?
Thank you for any and all Asisstance, I can't state enough how important and helpful this would be!

Are these backups upon MMC or within PC Suite upon PC? If the latter you could try NbuExplorer: http://sourceforge.net/projects/nbuexplorer/
Happy to have helped forum in a small way with a Support Ratio = 37.0

I updated to Firefox 5.0 today and then tried to communcate with Garmin to update maps for my automotive GPS but Firefox 5.0 is not compatible with Garmin communicator.

Firefox would not allow me to communicate with Garmin, when I tried to load Garmin Communicator, I got a message saying that Firefox 5.0 was not compatible with Garmin Communicator.w

Simply go to:
1.View 2.Select tool bars 3. Uncheck any of the toolbars below: a. Babylon toolbar b. Softonic Eng 7 Community tool bar!
4.Finish.... if nothing happened try to unchechked other tool bars.

Cisco VT Advantage with IP Communicator

Similar Messages

Maybe you are looking for