Cisco WAAS moibile integrated with Symantec Backup Exec 2010

Here customer requirement is to take backup of opened Database file .fdb
(Microsoft Dynamic Navision) integrated with WAN optimization (Cisco WAAS
mobile).
Problem is Cisco WAAS mobile is not optimizing Symantec backup process when backup job is running.
Please find attached files (WAAS mobile accleration status with symantec
backup process).
Customer is using Microsoft Dynamics Navision (ERP application).
WAAS mobile client is connecting and file copy is accelerating, but
symatec backup (beremote.exe) and Navision (fin.exe) processes are not
accelerating.
I added above processes in WAAS mobile server's acceleration list.
Please advise if any changes has to made in WAAS mobile server.
Regards
Prasad
Cell: 9000012355

Hi Prasad,
According to the screen shots provided the fin.exe process is bypassed due to Low Latency. From the admin guide this means:
Bypassed : Low Latency. The latency between the client and the application server is less than the latency threshold, which is 10 ms by default. This threshold may be modified on the Connection Settings tab on the Configure > Clients > Networking page.
Also, I see SERVER.exe process is going to the same server or subnet as fin.exe but is bypassed due to Pre-Existing connection.
Bypassed: Pre-existing Connection. When WAAS Mobile is started after other applications, the existing TCP connections associated with those applications will not be reset unless the “Auto Reset Connection” property has been selected for the process in the Accelerated Processes table, and hence, these pre-existing connections will be bypassed.
Lastly, I see bermote.exe is listed as Bypass Reason Unknown in one of the screen shots.
Bypassed : Reason Unknown. This message will occur when an attempt to reset a TCP connection associated with an application that has been configured to have these connections be automatically reset (via the Accelerated Processes table on the Configure > Clients > Acceleration page) fails.
Is this client actually accessing a server that is remote for these first two processes?
For the last process, did we try to first exit the application in question and all the associated processes (beremote, and any other processes that may get started with this application), then start the WAAS Mobile client, then finally start the associated process/application?
Cheers,
Mike Korenbaum
P.S. If this answers your question please mark it as such.

Similar Messages

Exchange backup Issue with Symantec Backup Exec 2014

https://support.symantec.com/en_US/article.TECH211305.html
Have you looked at this article? Do you have the remote agent installed? I would see if there is updates for the agent as well( Right click the exchange server from your console and hit update).

Hi,
I am using Symantec Backup Exec 2014 software. I want to take the daily backup of our Exchange database (Exchange 2013). But I cannot add the Exchange database to the Backup process.
I tried Add server wizard and connect exchange from the server wizard. But both options are not working. But I can take the backup of files that stored in the same server (exchange).
Please help...
Thanks
KK
This topic first appeared in the Spiceworks Community

Symantec Backup Exec and Exchange

My Exchange Symantec backup exec stuck on consistency check why ? ( i'm running backup exec 2010 R3, 1 Active exchange 2007 no passive one it's defected ) all were running good before getting problem with the second exchange server

Hi,
I recommend you should check if you configurate all the settings in backup exec correctly.
In addtion, you can ask for help from symantec and check all the settings:
http://www.symantec.com/support/contact_techsupp_static.jsp
Thanks.
Niko Cheng
TechNet Community Support

Back up MaxDB thru Symantec Backup Exec

Hi everyone,
I've just installed a 64-bit unicode SAP ECC 5.0 on MaxDB 7.5 in Windows 2003 x64 Enterprise.
I am now trying to figure out how to configure Symantec Backup Exec 11d to work with MaxDB so that I can do online backups. I heard that it is directly not possible, but is there a workaround for this?
Any help would be appreciated.
Thanks,
Joseph

Hi Andreas,
That was a very good document that you recommended. It is clear enough. But the thing is I don't think NetBackup is installed to the server. The SAP-relevant options licensed and installed by the vendor for Backup Exec 11d are:
1. Agent for Oracle on Windows Servers
2. Agent for MS SQL Server
2. Agent for MS SQL Server 2000
3. Agent for SAP Applications
4. Backup Exec for Windows Servers
5. Remote Agent for Windows Servers
Do I have to install NetBackup or does it have a counterpart in 11d?
Thanks again,
Joseph

Full HyperV Backup - Symantec Backup Exec (any version)

I'm sure this will be a favourite topic, but I was wondering if anyone could shed any light on this situation.
We have a customer which has Server 2008 R2 with a .vhd which is 1.46TB in size, and a fixed disk. They have only 150GB spare on the drive which seemed like enough. We have had an occasional full HyperV backup to tape, but almost every other
day it fails with the following in Backup Exec (now 2014):
"V-79-40960-38521 - Snapshot Technology: Initialization failure on: "VRTSRV::\\HG-2008-STD\Hyper-V?Virtual?Machine\HG-2011-SBS". Snapshot technology used: Microsoft Volume Shadow Copy Service (VSS).
A virtual machine snapshot could not be created. Use the Event Viewer on the Hyper-V host to identify the cause. If the virtual machine is not properly configured, it may be necessary to use the Event Viewer in the virtual machine to identify the
cause."
In the Event log of the Virtual Machine itself, there is only one VSS error, of which I'm told I can safely ignore, but resolved anyway:
"Error: NetLocalGroupGetMemebers(spfarm), 0x80070560, The specified local group does not exist."
I also have the following error on the physical host each time I run the backup:
"Failed to create the backup of virtual machine 'HG-2011-SBS'. (Virtual machine ID A5185ADC-F34B-4898-927C-784EBC23EA1B)"
Symantec say it's the VSS writers (apart from one support technician who admitted their product was a joke) but then Microsoft say it's Symantecs issue. I'm inclined to believe Microsoft in this case, but I'm getting nowhere and our customer isn't
getting a reliable backup of their whole vhd.
Is this due to only having slightly less than 10% free space on the physical host or just Backup Exec being its usual self? Does HyperV REQUIRE that you have a certain percentage of space free on the physical machine to process?

For further troubleshooting: what happens when Windows Server Backup is configured for the VM backup and ran?
Lenora Moss Technical Support Engineer, SMB Partner Support, Symantec Corporation www.symantec.com
Surprise surprise, it works just fine :-)
Ok, I have resolved it (kind of)
I was having ESE errors when the backup tries to run and fails immediately after. This points to Exchange VSS errors so leads you down the wrong path. After hours of following false leads, I finally found that Sharepoint can bibizarrely create these errors
after installing SP1 and not running. I ran the following command:
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
...which resolved most of these errors, but I still got ESE Information Store Shadow Copy instance aborted errors. At this point, I'm still thinking it's a corrupt Exchange store and/or logs, as suggested by Microsoft.
Long story short, after much digging, I came across an article suggesting to check into SQL writer service permissions having to be local administrator, and not local system account, I decided to disable this service as BE is installed on a Domain Controller
so doesn't have a local admin account to use as suggested in some articles. All of a sudden, I was in business!! ESE VSS events were logging successfully and I'm now performing a full image backup finally.
Although this seems like a Microsoft issue, the fact that Veeam backed up fine, along with Windows Server Backup, does still point to BE. I still don't consider this a resolution because had the customer actually used SQL on this Server (they just use
SBSMonitoring and BE instances) there wouldn't be a backup of SQL available that can utilize GRT, but would have to perform maintenance plans and have those added to the backup routine for DR.
Hope this helps anyone else having these issues. I would also advise moving the logs manually within Exchange to another drive if you have already used the SBS wizard to move the actual database, as it doesn't move the logs this way. I've seen other
backup Software fail for this very reason but not give any hint as to what the issue was.

RMAN Backup error with Symantec Backup Tool

Hi
My Environment
OS Windows server 2003 R2
Oracle 10G R2 10.2.03 2 node RAC
When i am taking backup maually in the command prompt with RMAN, it is successful, but when we are trying from Symantec Backup tool we are getting errors like
RMAN 03002 failur of Backup lus archivelog is problem,
RMAN 10015 error compiling PL/SQL programme
RMAN 10033 error during compilation of job step2
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer)
So please tell me why its giving the error with Symatntec and why when i am doing manually it is successfull.
What could be the solution, please we are taking daily and weekly backups with Symantec on HP tape library. Please suggest me to the needful.
Immediate reply highly apperciated
Thanks
Edited by: 873393 on Apr 17, 2012 10:09 AM

Hello,
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer) The ORA-04030 error message is interesting. It means that the OS doesn't have enough memory for Oracle.
So you may monitore the Memory usage of the Server during the Symantec Backup, and check for any activity. May be the Symantec Backup runs when other Batch Jobs use already a lot of memory . You may also have to extend the RAM of the Server.
Also, check for the RMAN script used by Symantec and compare with the "manual" script. May be, some options are used with Symantec and consume more resources on the Server.
Hope this help.
Best regards,
Jean-Valentin

Symantec Backup Exec SQL Agent & SBO 2007

Does anyone use symantec sql agent to backup their sbo db's? Any cons/pros, negative/positive feedback?
or
Backup sbo db's in real-time using log-shipping or something similiar?

Hi Scott
Most customers prefer to just use the backup manager from SAP to create a Zip file and then write the zip file from its folder to their backup drive or device. I have one customer that is writing the backup straight from SQL to a tape drive. I would suppose it depends on your preferences and amount of time and manual intervention in the process. Best is usually to have at least a daily zip backup and write to tape drive at least once a week. It is always a good idea to have an "off-site" backup in case the server is stolen, etc.
You could use Backup Exec or even the standard Windows backup if it detects and supports your backup drive to backup straight form SQL.
As far as log shipping is concerned, most customers are set to simple recovery and prefer to take the risk while minimizing data space used. Best would be to check the documentation on the SAP Business One Portal for any guidelines in terms of SQL and backups.
Do you have any specific concerns, or database growth issues?
Kind regards
Peter Juby

Symantec BackUp Exec License Issue

Hey guys,
I have a license issue with Backup Exec. I have the agent licenses as well as the server license for Backup Exec 2014. But the issue is on the next screen. It gives no options to select. Am I missing something??
This topic first appeared in the Spiceworks Community

Hey guys,
I have a license issue with Backup Exec. I have the agent licenses as well as the server license for Backup Exec 2014. But the issue is on the next screen. It gives no options to select. Am I missing something??
This topic first appeared in the Spiceworks Community

Cisco UCCX 8 - Integration with SAP BCM

Hi
Can Cisco UCCX 8 be integrated with SAP BCM for the crm requirements?
Thanks,

I have heard that these guys offer an integration but have not worked with them myself: http://www.tcandc.com/cisconn

Tandberg Codian MCU 4505 integration with Microsoft Lync server 2010

Hi,
We are trying to integrate Tandberg Codian MCU 4505 with Microsoft Lync server 2010.
We do not have any VCS in the setup.
If anybody has tried it before, please suggest configuration to be done on Tandberg Codian MCU 4505 and Lync server.
Regards,
RN

Hi,
so, i have the same environment. Lync 2013 and a cisco 1000V router on esxi with VRFs.
here is m config:
vrf definition Mgmt-intf
address-family ipv4
exit-address-family
address-family ipv6
exit-address-family
voice vrf Mgmt-intf
voice service voip
no ip address trusted authenticate
address-hiding
media disable-detailed-stats
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
bind control source-interface GigabitEthernet0
bind media source-interface GigabitEthernet0
listen-port non-secure 5066
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
voice class codec 2
codec preference 1 ilbc
codec preference 2 g722-64
codec preference 3 g711alaw
codec preference 4 g711ulaw
interface GigabitEthernet0
vrf forwarding Mgmt-intf
ip address 172.16.1.164 255.255.255.0
negotiation auto
dial-peer voice 15 voip
tone ringback alert-no-PI
numbering-type unknown
preference 1
destination-pattern 4.
rtp payload-type comfort-noise 13
session protocol sipv2
session target ipv4:172.16.2.207:5068
session transport tcp
voice-class codec 2
dtmf-relay rtp-nte
dial-peer voice 17 voip
numbering-type unknown
preference 1
destination-pattern 7.
rtp payload-type comfort-noise 13
session protocol sipv2
session target ipv4:172.16.1.32:5060
session transport udp
voice-class codec 2
dtmf-relay rtp-nte
gateway
timer receive-rtp 1200
sip-ua
keepalive target ipv4:172.16.2.207:5068 tcp
172.16.1.32 - Asterisk with a extensions on it.
172.16.2.207 - Lync 2013 mediation server with other extension on it
i can call from Asterisk extension via router and to Lync extension.
i cannot call from Lync to Asterisk.
TCP session with the router from Lync on port 5066 does not come up. three way handshake seems to come up.
strange. lync person seems to configured everything correctly
any thoughts?

Cisco call manager integration with mediant

How can we add and integrate mediant with cisco call manager ?
Can you have doc for this kind of setup ?

Hi Sachin,
We do run a hybrid Callmanager to Nortel Meridian setup (works well).
Here are some great docs;
Cisco Unified CallManager
Case Study: Nortel 61C PBX to Cisco IP Telephony Migration
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_white_paper09186a00801115e0.shtml
Nortel Meridian PBX and Cisco CallManager Integration
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008011888c.shtml
Cisco Unified CallManager System Guide, Release 4.2(1)
Cisco DPA Integration
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008055cd53.html
Hope this helps! Let me know if you need additional info.
Rob

Cisco Unified Communications integration with Exchange cloud service

Has anyone integrated Presence and/or Unity Connection with an Cloud based Exchange provider service? Presence would be for calendar integration and Unity Connection would be for Unified Messaging (Single inbox for vmail and email)?
Thanks,
Mark

Yes, BPOS is supported in CUC 8.5
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/design/guide/8xcucdg010.html

Cisco Prime NCS integration with ACS 5.1

Hello,
We've an issue with authorization on NCS system. NCS successfully integrated witch ACS, but there is a problem with one user. All users have equivalent rights under root. There is shell profile with all possible tasks (exported from NCS server) configured on ACS. All users exept this one (unlucky one:)) authorizes successfully. In ACS logs, authentification and authorization status for this user is passed and all attributes (policy, profile, AV-pairs e.t.c.) is the same as for another users. This 'unlucky' user gets a following message:
There is surely no browser or network issue. Tried from different PCs with same result. There is no any local info related to this username on the NCS server. When i change one charecter in the username on his ACS account, everything works well. What could be a possible reason of this behaivour? Thanks!
Our ACS v
Version 5.1.0.44.X
And NCS
Version : 1.1.2.X

this question should be moved to the Security > AAA forums as this sounds more like an ACS issue than NCS.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Cisco Security Manager integration with ACS

Has anybody got this working yet.
I have tried but as yet have been unsucessful in registering csm with the ACS server.
I am following the the instructions however, nothing seems to work all i get is failed to registar.
Any help would be appreciated
Regards
Jason

Check out this link...
http://www.cisco.com/en/US/products/ps6498/prod_troubleshooting_guide_chapter09186a00806e23e3.html

MP for Symantec Backup Exec 2014

Hi
I have a simple question - how to download it?
There is an article https://support.symantec.com/en_US/article.TECH224867.html but i cant found any download link
none

There is a link at the top of the article for "Attachments", that gives you a pop-up with a download link which is this
https://symwisedownload.symantec.com/resources/sites/SYMWISE/content/live/SOLUTIONS/224000/TECH224867/en_US/Symantec_Backup_Exec_2014_MP_SCOM.zip?__gda__=1430119689_9dc814fb9bf441368a244f444174d65a.
Does that answer your question?

Cisco WAAS moibile integrated with Symantec Backup Exec 2010

Similar Messages

Maybe you are looking for