Cisco WCS Server unable to login

Hi ,
I have a Cisco WCS 4.x Server installed on Windows Server.I am not able to login to the WCS Server through Root username password. I have recover the root password through WCS password recovery procedure.After the password recovery i was able to login to the WCS and it started working with the new password.
The problem repeats everytime.I have recovered password around 4 to 5 times and after some days again the same issue means i am not able to login to the server.
I wanted to know whether the password gets expired automatically or is there any issue with the database due to which password gets reset automatically.
One thing i have observed if i change the password through recovery procedure it works for some time and again after some days i am not able to login.
Please advice me in this issue.
Thanks & Regds,
Lalit

Hi,
please do the password recovery and forward the log "wcs-0-0.log".
Lets see from the logs!!
Regards
Surendra

Similar Messages

  • Mac Mini Server unable to login or reinstall from DVD

    Hi all,
    I bought a mac mini server in dec 2009, it was working great for the past 6 months. Recently, I was unable to login to any of my accounts. I brought the machine to my local authorized service provider(Singapore Wheelock Epic Centre). They said that the hardware is fine but they cannot do a fresh install for me because they do not have the install disk. On top of that, they want to charge me $150 if I bring the install disk in for them to do a fresh installation for me even though I am under warranty.
    With that I bought a superdrive and attempt to boot from my install disk for a fresh installation. But the superdrive cannot boot up when I pressed 'D' numerous times.
    Is there any solution to this or do I have to throw away my $1.5k server?

    +But the superdrive cannot boot up when I pressed 'D' numerous times+
    I realize that you meant to say "C" instead of "D", but the technique also requires that you hold down the startup modifier key ("C" in this case) rather than pressing and releasing it.
    You should hold down a startup modifier key (like C or Option) as soon as you hear the startup chime or beep. Keep holding down it until you see the "gear" spinning or you get a menu on the screen.
    You may also have better luck if you just borrow a PC USB keyboard to do this startup modifier sequence. The C key will work the same; but to get Option, you press the Alt key instead.
    Also keep in mind that you cannot use the install disc from your MacBook to startup the Mini.

  • Cisco Agent Desktop, unable to login

    I have a new installation of UCCX 8.0.2 SU3 HA and twice now it has been reported that in the morning agents are unable to login to CAD, the error they receive is "Initialization Failed. Please try again or try restarting the application."
    The only thing I have found in each situation was to re-start the UCCX engine on the master server. If I am running realtime reports I also see "not connected" when trying to look at resources, CSQs or overall UCCX stats. Once the engine has been restarted agents login fine and real time reports shows "fully connected"
    Has anyone experienced this before and know of a way to prevent this from happening?
    Thank you,
    Steve

    Hi Everyone,
    I experienced the same issue today on UCCX 8.0 SU3. All the agents were getting Initialization Failed error.
    I restared the UCCX engine on both the servers and agents are able to login now. I am interested in finding out the root cause and a permanent fix for it.
    Has anyone found a solution to it?
    I could find the following but matching the problem description but it's in TERMINATED state and moreover I am on MCS and not on VMware.
    CSCtf34095 Bug Details
    UCCX CAD agent not able to login when using C-series server
    Symptom:
    CAD agent not able to login when using UCCX C-series server. We are getting error "Initialization failed. Please trey again later or restart the application"
    Conditions:
    UCCX on C-series server with VmWare
    Workaround:
    None
    Thanks,
    Kapil

  • NAC Guest Server, unable to login with sponsor

    We have a Cisco NAC Guest Server (version 2.0.5).
    I created some sponsors and wanted them to be in another sponsor user group than the default group. So I created a sponsor user group and changed the group permissions (Allow Login is set to Yes, edit account .. are set to Own Accounts).
    No I wanted to try out the new sponsors but I can't login to the NAC Server. I get a "username or password invalid" as reply. If I change the sponsor user group of the user to DEFAULT, everything is working.
    The logfile on the NAC Server shows the following error:
    Oct  4 13:05:14 s100059 NGS_SPONSOR: [audit NGS 0 10.106.161.5] Login failure: xxx
    xxx is the username of the sponsor.
    Why can't I login with the sponsor when he's in anoter sponsor group than DEFAULT?
    Martin

    If credentials work on CCMuser CUPSuser I would suspect either some kind of communication problem between the clients and the servers and/or misconfiguration (user/device/line association, device owner, roles, CTI/CCMCIP profiles, etc) on CUCM/CUPS.
    Specially because you mention the same happens with CUPC.
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Cisco Finesse- Agent Unable to Login

    Hi,
    When I connect Finesse Webpage for loggin, the system displays "Invalid ID or password. Please try again.". But I make sure the ID and password are correct.
    In Team Resource tab, I just only see Default with ID 1.
    Anybody know this issue?
    Thanks
    Thuc

    Hi all,
    I opened TAC case and the engineer looked that the Peripheral ID had been wrong. And I changed it and fixed issue.
    Thanks all

  • Cisco WCS licencing

    I have a Cisco WCS server with two WCS-Plus-50 licences installed. unfortunately, I purchased the wcs-base-50 and wcs-plus-upg-50 as an attempt to add additional AP licences to the server however once you have the plus licences installed on wcs you can't add a base and upgrade licence.
    Cisco are being really difficult about exchanging the base and upgrade licences for a wcs-plus-50 licence. Does anyone know if its possible to uninstall my existing plus licences from wcs, install the base and upgrade licence and then re-add my existing plus licences?
    Thanks,

    You should be able to do that... I have had to uninstall the plus to add an addr license.
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

    I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

    Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

  • Issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

    issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

    issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

  • Can not log into server computer with any accounts - "You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."

    I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
    You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
    I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
    Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
    ACL found but not expected on Users
    Repaired "Users"
    ACL found but not expected on Users/.localized
    Repaired "Users/.localized"
    ACL found but not expected on Users/Shared
    Repaired "Users/shared"
    ACL found but not expected on Users/Shared/.localized
    Repaired "Users/Shared/.localized"
    Permissions repair complete.
    But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?

    Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
    I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.

  • I am unable to login to use FaceTime.  I keep getting the error "The server encountered an error processing registration.  Please try again later."

    I am unable to login in to use FaceTime.  After signing in to my apple account, I get the error message " The server encountered an error processing registration.  Please try again later."

    Thank you for getting back to me so quickly. The RSS feed is http://www.lifeinnortheastohio.com/the-panel-scanners/rss.xml

  • Unable to login to Directory Server: SaveChangeException

    I saw an earlier posting that reported a similar problem but there was no answer to the question so I will post the question again.
    I have just installed Oracle Directory Server but I am unable to login with the default username/password. I can connect if I leave the User and Password fields empty but when I specify orcladmin/welcome I get the error below. Does anyone know what the problem could be and how I can fix it?
    Bind of request to LDAP Server failed.
    oracle.ldap.admin.common.SaveChangeException: Bind of request to LDAP Server failed.
    at oracle.ldap.admin.Root.saveChanges(Root.java:815)
    at oracle.ldap.admin.common.AdminPropView.saveChanges(AdminPropView.java:710)
    at oracle.ldap.admin.client.propEditors.TabView.commit(TabView.java:538)
    at oracle.ldap.admin.client.AdminUtil$logonCmds.run(AdminUtil.java:727)
    at java.lang.Thread.run(Thread.java)

    I figured it out. For anyone else searching for this problem: the issue was that OID was not started. All I needed to do was start it (oidctl .... start) and it seems to be ok now. In any case, I feel a little silly for not starting things up properly but in my defense the error message did not help at all.

  • Sync Tool error: Unable to Login to Server

    Hello - we're using the SunONE Sync Tool v1.1 and have a user trying to synchronize with Outlook, but the tool keeps throwing an "Unable to Login to Server" error, although the exact same username, password, server and port # work on the browser login. This is the only user with this problem; on other machines (with the same OS and version of Outlook, the sync tool works for the most part - at least it lets the user login).
    We've tried re-entering the settings, re-entering the password and the next step will be a re-install of the sync tool.
    Any ideas? Thanks!
    _Khalid J Hosein
    Sys Admin

    Hi,
    I am also facing exactly the same probelm with one of the user. I have tried re-installing the sync tool. But with the same error message "unable to logon to the server" . I have looked into the logs the only thing I could find is the following error message
    ReadWordFromRegistry: Registry open system eerror message- the system cannot find the fiel specified , error code:2 "
    I have tried on 3 other system and it works omethly except for this user.
    I have exhausted all my options but no luck so far .
    Can someone help !

  • Server admin is unable to login to server.app after upgrade to Mountain Lion Server?

    After upgrade to Mountain Lion Server I am unable to login to the server tools. When I input the admin user name and password the dialog box just shakes indicating the wrong password. But it is the correct password. How do I reset the password or if necessary how do I rest the server and start over on Mountain Lion. I found info on how to reset the server on previous versions of the server which involved executing a plist in the LaunchDaemon folder. However that file does not exist on the server following upgrade to Mountain Lion.
    Thanks, Howard

    I upgraded today and had the same issue. I took following steps to fix my computer.
    Boot into Recovery Partition (Hold Option Button while booting)
    Open Terminal.
    Type resetpassword
    Select your hard drive
    Select the user account (Administrator)
    Enter a new password for the user
    Reenter password
    Save
    Restart
    Boot normally, Login as Adminstrator with the new password and add "Admin" permission to your account.
    Restart
    Everything should be working as expected

  • Unable to view IDS logs from cisco VMS server

    Hi,
    Pls help me out for viewing IDS logs from my cisco vms server (4th edition with SP2,java 1_4_1.02)
    Configured IDS sensor with IDS MC (2.0.1) and updated signatures with latest sig files,
    Configured Security monitor to view my IDS sensor and showing TLS was connected and cisco IDS REDP/SDEE,when viewing logs error was server codes need to be update., unreconiged last saved IDS alarms.
    Pls give me the solution
    Regards
    Ajay

    Hi Ajay,
    when you upgrade to sec mon 2.0.1, the database is the same, but the formats are different.. you need to do somethings for converting these formats, which might take hours together, if ur database has too many events...
    for information to convert the file format, refer to this URL:
    http://www.cisco.com/en/US/products/sw/cscowork/ps3990/prod_release_note09186a0080386f72.html#wp1087204
    see the section "Using the ConvertAndImport.pl Script after Upgrading from Security Monitor 1.2.3 to Security Monitor 2.0.1 "
    do this and see.. let us know
    Raj

  • Unable to login with Jabber Windows

    Hi ,
    Am unable to login the Jabber Windows Client. Getting the error as "Unable to Communicate With the Server".
    Able to login with CUPS & CUCM end user page. CUCM Integrated with LDAP.
    While going through the UP Profile logs seen that "Failed to SOAP login".
    Tried with restart of CUCM & CUPS several times but no go.
    CUCM Version - 8.6.2
    CUPS Version - 8.6.1
    Tried with CUPC client result also same.
    Thanks in Advance

    If credentials work on CCMuser CUPSuser I would suspect either some kind of communication problem between the clients and the servers and/or misconfiguration (user/device/line association, device owner, roles, CTI/CCMCIP profiles, etc) on CUCM/CUPS.
    Specially because you mention the same happens with CUPC.
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

Maybe you are looking for