Cisco which router are support 10g sfp module

HI
I would like to know in cisco 3900,2900 etc which router are supports 10g sfp modules.
Thanks
Veeramani.G

I would like to know in cisco 3900,2900 etc which router are supports 10g sfp modules.
No it won't.  Both routers won't even push 1 Gbps. 

Similar Messages

  • Will Cisco WS-C2960X-24TD-L supports 1G SFP module. If yes kindly provide the part number..

    Will Cisco WS-C2960X-24TD-L series supports 1G SFP module. Switch is actually showing SPF+ port and i need to connect 1G uplink from remote Dlink Switch....

    WS-C2960X-24TD-L
    GLC-BX-D
    GLC-BX-U
    GLC-LH-SMD
    GLC-SX-MMD
    GLC-EX-SMD1
    GLC-ZX-SMD
    GLC-T
    GLC-ZX-SM
    GLC-LH-SM
    GLC-SX-MM
    CWDM-SFP
    http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html

  • 10G SFP Module absent after reload in Nexus 5548UP

    Hi there,
    i have a problem concerning two new 5548UP.
    After a reload, the 2x2 10G SFP Modules SFP-10G-SR are displayed as "sfpabsent" on a random basis.
    When i plug it out and afterwards in again, they work fine an the VPC-Peer link across the two switches comes up.
    My 1G SFP modules  are all working correctly.
    I tested firware version 6.0 and 5.2.
    Any suggestions?
    Thank you very much!

    Hi,
    We had the same problem with a Nexus 5596 in 5.1(3)N2(1a) last night:
    %NOHMS-2-NOHMS_ENV_ERR_FAN_SPEED: System minor alarm in fan tray 1: fan speed is out of range on fan 2. 5812 to 12500 rpm expected. 4072 rpm read
    %NOHMS-2-NOHMS_ENV_ERR_FAN_DOWN: System minor alarm on fans: One fan missing or failed
    %NOHMS-2-NOHMS_ENV_ERR_FAN_RECOVERED: Recovered: System minor alarm in fan tray 1
    %NOHMS-2-NOHMS_ENV_ERR_ALL_FAN_UP: Recovered: System minor alarm on fans: One fan missing or failed
    %PFMA-0-SYS_SHUTDOWN_FAN_DIR_MISMATCH: System shutdown in 60 seconds due to fan dir mismatch
    %NOHMS-2-NOHMS_ENV_ERR_FAN_DIR: System major alarm: fan direction mismatch with other fan(s)
    %PFMA-0-SYS_SHUTDOWN_FAN_DIR_MISMATCH: System shutdown in 55 seconds due to fan dir mismatch
    %PFMA-0-SYS_SHUTDOWN_FAN_DIR_MISMATCH: System shutdown in 50 seconds due to fan dir mismatch
    After reseating the FANs the switch came up. We'll open a TAC case.
    Javier

  • Which transitions are supported in Keynote iPad?

    I use some simple transitions in Keynote '09 on the Mac that work flawlessly. Usually dissolve, sometimes several on a single slide, and sometimes with grouped objects.
    It seems as if grouped object transitions on K-iPad is no good, and also seems as if more than one transition on a slide is a problem -- either doesn't work or is put in the wrong place.
    Is there a list of which transitions are supported, etc? I can't find it in the Apple support pages, but perhaps I'm not looking in the right place.

    Thanks Tom for the helpful article link. Though where would one find a list of the iPad availabe fonts...?
    From Apples own text...
    Use fonts common to both the Mac and iPad platforms. Fonts that are not available on the iPad are replaced with the Helvetica font.
    So does the iPad tell the user which fonts are "common" ???
    Thanks again.

  • 10G SFP module

    Hi all,
    I have a Cisco 3850 switch stack with a c3850-nm-2-10g network module which came with some 10Gb sfp's (SFP-10G-SR). I have a 1Gb layer 2 WAN link being provisioned and would like to know if I can connect this 1Gb link via the SFP-10G-SR or do I need to buy a 1Gb sfp module ( 1000BaseSX SFP )
    Any information would be much appreciated.
    James

    SFPs are fixed speed so you have to have the same speed SFP at each end of a fiber link.
    Note that if you use both the 10 Gbps SFPs for other connections that Gi1/1/1 and Gi1/1/2 are not available for use. See Table 3 here.

  • CISCO 3945 Router - ARE POWER SUPPLIES LOAD BALANCED?

    CISCO 3945 Routers - Are the 3945 Router power supplies load balanced by default?  
    We are trying to determine if our switch/server rack at our remote location has maxed out it's power load requirements.  I just need to know if the 3945 power supplies load balance by default or if the redundant power supply is ON but not really providing the router with power and is just there incase the other power supply fails - Thank you.

    Thank you for your reply. I had read that the "Cisco 3845 and 3845-NOVPN router accommodates two hot-swappable power supplies and a single power supply meets router requirements. The second power supply provides redundancy, load sharing, and increased router availability. Either power supply can be removed without affecting router operation. Any combination of two power supplies is permitted."
    Unfortunately, I couldn't find any specific information for the 3900 series routers that stated it also load balanced power.
    Follow-up question: Do you know if the 3800 series routers load share by default? I know it is capable of power load sharing based on the above description but do they load share equally by default? If that's the case for the 3800's then hopefully that's the case for the 3900'S series routers. Which means, we have not maxed out our power requirements in our racks.

  • RuleBasedBreakIterator - which languages are supported?

    Hi
    I need to split text into words for lexical analysis, and RuleBasedBreakIterator seems the logical place to start. I gather that some eastern languages don't use whitespace to separate words, hence the existence of DictionaryBasedBreakIterator.
    I can't find a definitive list of languages that are supported. I'm looking for Japanese, Korean, Chinese and Russian. Anyone know if these are supported and if there is a definitive list anywhere?
    Thanks,
    Rob

    I'm assuming that you're referring to the class of the same name in ICU4J, since it isn't in the standard Java API. Your question isn't quite in their FAQ, which is here:
    http://icu.sourceforge.net/icu4j_faq.html#RBBI_1
    However it doesn't seem to have been updated recently (my impression based on references to Java 1.1). You could take its suggestion to "contact us" and ask on their mailing list, I suppose.

  • Which version are supported in HP QTP?

    I read the following page. But it doesn't help me at all.
    https://h10078.www1.hp.com/cda/hpms/display/main/hpms_content.jsp?zn=bto&cp=1-11-127-24%5e 1352_4000_100__
    QTP supports AIR 2.0 with Flex SDK 3.x in ja_JP?
    Is there a matrix of supported versions??
    thanks
    Shigeru Nakagaki

    Thanks Tom for the helpful article link. Though where would one find a list of the iPad availabe fonts...?
    From Apples own text...
    Use fonts common to both the Mac and iPad platforms. Fonts that are not available on the iPad are replaced with the Helvetica font.
    So does the iPad tell the user which fonts are "common" ???
    Thanks again.

  • How to find which displays are supported

    Is there a way that I can find out what monitors are supported in 10.5.4? Is there a file in one of the directories that shows the various drivers? I had been using my Sony KLV-S32A10 as an external monitor, and it worked fine in Leopard 10.5.2, but with the upgrade it just creates an unreadable mess on the screen. I think that there must have been a change in the drivers and for some reason the Sony is not supported. Any ideas on how to fix it? Thanks.

    Your best bet is to go to Sony's website and see if they have updated drivers for it.
    Glor

  • Which video are support Ipad mini

    Hai,
      I want to know which format is support the Video . I have a MP4 video , but audio is not support. I test in the laptop but audio and video is working.
    From,
    S.Viswanadham,
    Visakhapatnam,
    Andhra Pradesh.

    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG‑4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    http://apple.com/ipad-mini/specs/

  • How many calls cisco 3745 router can support?

    I want to select a router as GK for 1000 users which located in different site with about 10 GW. Cisco 3725 or 45 is ok?
    Is it must for CCM server?

    It is beased mainly on port size for the type of voice circiut you are using. FXO,FXS E&M low volume and users. T1 PRI or CAS 23-24 calls per circuit to the PSTN. I am not sure of the realestate on the back plan ,but I am sure it is plenty. I have 600 hundred off of a 2621 4 pri circuits in it.

  • I have a Cisco 2811 router with a NM-2FE2W module installed, it shows up in Sh diag but it says it is disabled?

    I installed NM-2fE2W module on the 2811 router on the bottom which I guess is slot 1.
    It shows up in Sh diag as disabled how can I correct this? I have the same IOS as on packet tracer 6.1 ver 12.4 (15)T. I have tried upgrading the IOS and downgrading IOS.
    Slot 1:
    Unknown (type 919) Port adapter
    Port adapter is disabled
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    Hardware Revision : 1.0
    Top Assy. Part Number : 800-21601-02
    Board Revision : B0
    Deviation Number : 0-0
    Fab Version : 01
    PCB Serial Number : JAE0831RLPQ
    RMA Test History : 00
    RMA Number : 0-0-0-0
    RMA History : 00
    Product (FRU) Number : NM-2FE2W-V2=
    EEPROM format version 4
    EEPROM contents (hex):
    0x00: 04 FF 40 03 97 41 01 00 C0 46 03 20 00 54 61 02
    0x10: 42 42 30 80 00 00 00 00 02 01 C1 8B 4A 41 45 30
    0x20: 38 33 31 52 4C 50 51 03 00 81 00 00 00 00 04 00
    0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    Don't know for sure what's the cause of your issue, but some hardware requires a minimum IOS version and/or feature set to utilize.  Also, some hardware requires additional configuration commands to enable the hardware.

  • Is there a way to upgrade a Cisco 866VAE router to support the OSPF routing protocol?

    I work for the government and we purchased a Cisco 866 VAE router for a project.  Our base network runs OSPF routing protocol and we need to know if there is a way to upgrade the router that we purchased to support this protocol.
    Thanks for any assistance,
    James Reynolds

    Hi,
    I have searched through both the data sheet and the 800 series config guides and
    it looks like there is NO support for OSPF for this router family.
    http://www.cisco.com/c/en/us/products/collateral/routers/800-series-routers/data_sheet_c78-693249.html
    http://www.cisco.com/c/en/us/td/docs/routers/access/800/software/configuration/guide/SCG800Guide.pdf
    Regards
    Alex

  • Equium L30 - Which CPUs are supported?

    I wonder if anybody knows what cpus hare supported by the Equium L30? Only thing i can find is that it's socket 479.
    Mvh//Bragelito

    Hi
    To be honest I cant recommend upgrading the CPU. You will not get a strong performance boost, the difference is only small because other parts like mainboard, chipset, graphic card, etc. have the same slow performance after upgrading.
    Furthermore your notebook is only pretested with the current CPU. So nobody can say if the other CPU will run or not and so this update is a little bit risky.
    And are you sure, that the CPU cooler is good enough to cool the faster CPU?

  • Where is the documentation about which "tags" are supported, e.g [code], ..

    I know that I can use
    [ code]
    Source code
    [ /code]But what other "tags" are available?
    Can somebody point me to some docs?
    Thanks,
    Jason

    I know that I can use
    [ code]
    Source code
    [ /code]But what other "tags" are available?
    Can somebody point me to some docs?
    Thanks,
    Jason

Maybe you are looking for

  • I got a blank page when I try to see some of web pages inlcuding materials preapred by flash player

    I have a note book, Lenovor Y580. The OS and IE are as follows: OS: Windows 8 Pro K with Media Center Browser: IE 10 version: 10.0.9200.16540 (Update version: 10.0.4 (KB2817183) flash player: 11.7.700.169 The following is a web page prepared by a Kor

  • Db Backup

    hi, what is the best way to peform a backup of my oracle database? I do not have any idea of oracle or the application. I only want to create a backup of that database on a regular base. What is the best way? i think offline backup once per week (on

  • Void Check using FCH9 but no G/L posting  - urgent, please help!

    After a check is void, there is no G/L posting to the bank clearing account.  1.  How do I verify the check is voided? 2.  There was not entry in Cash Journal (S_ALR_87012309) to show the ZP is posted      to the clearing account.  Not sure why. Than

  • Canceled AOL - lost purchased songs

    I used my aol account credentials when I first started purchasing songs through the iTunes store. Eventually canceled the AOL account and established a new iTunes account. The songs I purchased through AOL are no longer accessible to me on my PC! Not

  • Lost ASP JavaScript Recordsets when I upgraded to CS 5.5

    I upgraded from CS4 to CS5.5  All the pages in my site that had ASP JavaScript recordsets are now showing that they have no recordset in the Bindings tab/window.  If I hit the + sign, the only option I have is "Spry Data Set".  How do I get CS 5.5 to