Cisco WLC 2500 snmp v3
hello everyone
i have a question.
i am trying to get snmp version 3 working on my network.
i am using solarwinds to monitor the cisco WLC's. but when i add a snmp-user to the controller
i get the following message:
(Cisco Controller) debug>snmp all enable
(Cisco Controller) debug>*Sep 06 14:40:30.515: SNMPD: Packet from: 192.168.8.192:59047, in_packet_len = 71
*Sep 06 14:40:30.516: SNMPD: calling srDoSnmp.
*Sep 06 14:40:30.516: Unknown engine Ids
*Sep 06 14:40:30.517: SNMPD: Sending SNMP packet to 192.168.8.192:59047, out_packet_len = 115
*Sep 06 14:40:30.542: SNMPD: Packet from: 192.168.8.192:59047, in_packet_len = 137
*Sep 06 14:40:30.542: SNMPD: calling srDoSnmp.
*Sep 06 14:40:30.543: SNMPD: received get pdu
*Sep 06 14:40:30.543: SNMPD:calling do_response
*Sep 06 14:40:30.543: Searching for requested instance of sysObjectID
*Sep 06 14:40:30.543: SNMPD: Sending SNMP packet to 192.168.8.192:59047, out_pac ket_len = 153
*Sep 06 14:40:30.765: SNMPD: Packet from: 192.168.8.192:59049, in_packet_len = 73
*Sep 06 14:40:30.765: SNMPD: calling srDoSnmp.
*Sep 06 14:40:30.765: Unknown engine Ids
*Sep 06 14:40:30.766: SNMPD: Sending SNMP packet to 192.168.8.192:59049, out_packet_len = 117
*Sep 06 14:40:30.791: SNMPD: Packet from: 192.168.8.192:59049, in_packet_len = 138
*Sep 06 14:40:30.791: SNMPD: calling srDoSnmp.
*Sep 06 14:40:30.791: SNMPD: received get pdu
*Sep 06 14:40:30.791: SNMPD:calling do_response
*Sep 06 14:40:30.791: Searching for requested instance of sysContact
*Sep 06 14:40:30.792: SNMPD: Sending SNMP packet to 192.168.8.192:59049, out_packet_len = 138
*Sep 06 14:40:30.818: SNMPD: Packet from: 192.168.8.192:59049, in_packet_len = 73
*Sep 06 14:40:30.818: SNMPD: calling srDoSnmp.
*Sep 06 14:40:30.818: Unknown engine Ids
*Sep 06 14:40:30.819: SNMPD: Sending SNMP packet to 192.168.8.192:59049, out_packet_len = 117
*Sep 06 14:40:30.843: SNMPD: Packet from: 192.168.8.192:59049, in_packet_len = 178
*Sep 06 14:40:30.844: SNMPD: calling srDoSnmp.
*Sep 06 14:40:30.844: SNMPD: received set pdu
*Sep 06 14:40:30.844: SNMPD:calling do_sets
*Sep 06 14:40:30.844: snmpd: Attempt to set object sysContact
*Sep 06 14:40:30.844: pass 1 of set request processing done
*Sep 06 14:40:30.846: pass 2 of set request processing done
*Sep 06 14:40:30.846: calling set method which do not have undo methods
*Sep 06 14:40:30.846: set failed, undoing
*Sep 06 14:40:30.847: SNMPD: Sending SNMP packet to 192.168.8.192:59049, out_pac
*Sep 06 14:41:57.517: Authentication failure, bad community string
*Sep 06 14:41:57.518: Bad Community name
*Sep 06 14:41:57.518: SNMPD: Failed to get result Pdu.
*Sep 06 14:41:57.518: SNMPD: *NOT* sending out packet, out_packet_len = 0
i have only configure the SNMP v3 User on the controller.
Hello Johan,
debugs show:
Authentication failure, bad community string
This indicates community string mismatch. Make sure about the community string and encryptin and privacy passwords.
Make sure to enable only SNMPv3 on WLC to isolate better.
HTH
Amjad
You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".
Similar Messages
-
Cisco WLC 2500 - 802.1x with Vasco Radius SMS OTP
Hello folks,
I have what seems to be a complex implementation with many things that need to be done on a customers network and I wanted to be pointed in the right direction.
The current scenario is such, the customer has a Cisco WLC 2500 device that has 3 access points(these are in the same AP group) connected to it. There is one SSID that I will call PRODUCTION here that some domain users use to connect to the local network. The customer has requested to have a GUEST SSID added to the WLC where guest users will connect to and recieve a SMS OTP for authentication.
Correct me if I am wrong, but I will obviously need to segment the SSIDs to have them running on different subnets to ensure that guest users do not have access to the production network once they authenticate. In order to do this I will need to configure Dynamic VLAN assignment for the Cisco WLC and connect it to a 802.1x port on the switch.
Now what is not clear is I am not interested in authenticating the users that connect via "Production SSID" and want to bypass authentication for those users and have them assigned to the default vlan (or maybe perhaps have them authenticate via LDAP on the AD), however I want to force the "GUEST" SSID users to authenticate so that they may recieve an SMS OTP (reason for this is to force guests to register their phone numbers to use the internet so that Illegal activity may be tracked).
1)So would it be possible to bypass authentication(or authenticate them via LDAP) for the PRODUCTION SSID as only domain users would know the SSID password to log on and have them by default assigned to the production subnet (default vlan) but force the GUEST SSID users to another VLAN via 802.1x sms otp?
2)*Important* Another issue that is not clear is will I be able to directly configure AAA Radius settings on the Cisco WLC to directly authenticate with the VASCO Radius OTP and recieve a challenge-response(required for OTP) during authentication? As I have seen from Ciscos Dynamic VLAN assignment docuementation (http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml) additional IETF Radius Perimeters are used such as Tunnel-Private-Group-ID etc are used which I can't seem to configure on the Vasco.
I do beileve this is a great project in helping me understand the INs and OUTs of CISCO WLC as well as Wireless NAC, If anyone could enlighten me and point me in the right direction I would be forever in debt. Much appreciated.
Best Regards
Sinan Barghouthi - JNCIA-FWV , JNCIA-IDP , CCA-NS , TCSM-8.0On your WLAN you can enable AES and TKIP. Just know that some clients mau have issue when they see both TKIP and AES. Ive had pretty good success with this in the past. Dont forget, you also need to enable WMM allowed to get N rates.
But you will need to configure AES on the client as well to support N rates.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
"I'm in a serious relationship with my Wi-Fi. You could say we have a connection." -
hello
i have a question about a cisco wlc 2500.
when you configure a interface on the controller, you can set a ip address
mask en DHCP server address but also you can set the interface as a AP-Manager
why is this?
thanksOn the old WLC models like 2100, 2006,4400 we had to configure the management interface for managing the WLC and the AP manager so that the APs could create the LWAPP or CAPWAP tunnel to the WLC.
On the new model of WLCs like the 2500,5508 the AP manager interface is not required, the management interface if it has the check for dynamic interface it will work at the same time as the AP manager interface.
Here is the link where you can check on how to deploy the 2504 WLC and the different setups to use with several AP managers.
http://www.cisco.com/en/US/products/ps11630/products_tech_note09186a0080b8450c.shtml -
Problèmes d'ajout de licences sur un controller WLC 2500
Bonjour,
Je possède un Cisco WLC 2500 controller pour mes bornes Wifi.
Sur ce controller j'ai déjà un pack de 25 licences d'installées.
Récemment j'ai acheté un nouveau pack de licence et il met impossible de l'ajouter correctement.
j’effectue la procédure suivante :
Je clique dans l'onglet "management" puis sur "software activation"
Je clique sur "commandes"
Je sélectionne "install licences"
ce que j'obtiens
ensuite je reboot le controller, mais les licences ne sont pas présente dans la liste.
Avez-vous une idée ?
Merci d'avanceGREP peut servir à deux choses : un enrichissement automatique via les styles GREP ou un rechercher-remplacer. Les styles GREP ne font qu'enrichir du texte existant mais n'ont pas pour fonction d'ajouter du texte. Pour ce que tu cherches à faire (un ajout), la syntaxe proposée dans le livre doit donc être utilisée dans la boîte de dialogue « rechercher-remplacer ».
-
Cisco WLC 5508 not sending SNMP Traps
Hello Everyone.
I'm having a weird error on our WLC environment. We have an HA with two cisco WLC 5508 and i cannot get SNMP Traps working on a Windows PC running Kiwi Syslog server (free ed.).
I can receive correctly Syslog messages, but not traps.
I Tried also to send SNMP Traps from WLC to a different PC using Linux with snmptrapd and it works fine.
I tried then to send from my Linux box a snmp trap to my Windows PC, and it works fine, but i still cannot receive anything from WLC.
Using Wireshark to detect traffic, i cannot see any packet on udp port 162.
I cannot figure out any problem with my scenario, but i can see the following errors on syslog:
*rmgrTrasport: Mar 30 16:08:22.602: #RMGR-3-INVALID_PING_RESPONSE: rmgr_utils.c:270 Ping response from <my_windows_PC> is invalid. Ip address do not match.
My WLC Version is 7.6.130.0
Thank you for your support.I have gone through your query and found the following fruitful links ,please let me know if it helps and mark it correct answer if it is.
https://www.manageengine.com/network-monitoring/help/userguide/processing_traps.html
https://rscciew.wordpress.com/2014/10/12/snmp-configuration-on-wlc/
Thanks :) -
Hi,
Is it possible to monitore a quantity of AP on Cisco WLC and quantity of wireless clients?
I was found only list of AP names over snmp...
Thanks in advanceHi, Ralf
If not late
I use script directly in monitoring system
main ()
VALUE=`snmpwalk -v 2c -c xxxCommunityxxx X.X.X.X 1.3.6.1.4.1.9.9.513.1.1.1.1.2 | wc -l`
echo "Message: Warning! Number of registed APs decriased."
echo "Data:Count"
echo "Count\t$VALUE"
exit 0
main $*
This is shell. but you can use simple only one line
`snmpwalk -v 2c -c xxxCommunityxxx X.X.X.X 1.3.6.1.4.1.9.9.513.1.1.1.1.2 | wc -l`
(from linux) -
Cisco WLC 5508 with 3702APs - mobile hotspot for 2000 Guest users
Cisco WLC 5508 with 3702APs - mobile hotspot for 2000 Guest users
I've been given a fantastic "opportunity" by my boss to use our existing wireless infrastructure to provide internet access to potentially upto 2000 VIP guests arriving with BYOD devices, in a very densely populated area for a 3 day event. We are talking an area of approx 200m x 15m. Think of it as an awards ceremony/concert. The solution will also be mobile so we will be using internet breakout from different telcos as it will move to approx 20 countries. The area is also incredibly densely populated with other wifi APs. I did a brief site survey and AirMagnet could detect over 2500 other 'rogue' APs from where I was stood! I hope CleanAir works!
We need a simple authentication method for them to connect with zero admin from our side. We don't want to just offer up a rolling daily PSK as that's a bit amateur and we don't really want the VIP guests sharing the PSK with others during their stay. Ideally they could self-provision by providing an email address.
I know the WLC can handle webauth for local users but I don't think it scales very well. ie I don't think I can offer the account to several hundred people.
Cisco ISE looks a very expansive (and expensive) product but I don't think we need all it's capabilities (do I?). It would be nice to just ask a potential user for their email address and grant them access and email them next year. I've seen Cisco NAC but that looks over the top too for just guest users who will only be accessing a shared internet connection.
I've seen 3rd party supposed software solutions from Kiosk Antamedia etc do they work with Cisco Enterprise WLC solutions?
We'd like to limit users to a certain (low) bandwidth and block (say) torrent traffic to keep the general user experience worthwhile.
Does anybody have any case study documents or experience of such a project? As well as the authentication it's how well the APs will handle the dense potential number of clients trying to connect in such a confined space.
Any suggestions would be gratefully appreciated from the knowledgeable community.
Cheers,
MikeHi Rasika,
We are having WLC 5508 model with software version running 7.4.121.0. AP Models are AIR-CAP2602I.
Normally our WAN links are good even while the issue pertains. We are connected to remote offices over ipsec site to site vpn for WAN. The link latency in WLC between the AP and the controller shows <1ms.
currently the Guest network is using WPA2-PSK auth given in the controller. we are trying to find a option to make the Guest wireless auth local to the office, and see if this solves the problem.
any suggestions,
Thank you,
Arjun -
Cisco WLC 5508 in HA mode error
Hai ,
I am Getting the below Error in Cisco WLC 5508, Version 7.4.100.0 in HAmode. The WLC contains Access Points having in local and Flex Connect Mode.
RF failure notification ErrorType: 32 Reason :Error: Config Sync failed on Standby for the usmdb:HA_send_usmDbApfMsDelete,
I sam a same bug in Cisco WLC 7.4.100.0 release notes similar to the error like
RF failure notification ErrorType: 32 Reason :Error: Config Sync failed on Standby for the usmdb:HA_send_usmDbSpamSetRadSlotAntennaType.
Any Ideas?HI Mohamed,
its a open Caveats in 7.4.100.0
CSCud26632
Symptom: The following SNMP trap appears on the controller when you change the channel width number to 40-MHz:
RF failure notification ErrorType: 32 Reason :Error: Config Sync failed on Standby for the usmdb:HA_send_usmDbSpamSetRadSlotAntennaType.
Conditions: Controller is in an HA pair. Join the 802.11n access point to the controller and change the channel width to 40-MHz and channel number to 157.
Workaround: None
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html
Reagrds
Please rate helpful posts -
Hi,
I have successfully connected my WLC 2500 controller with 20 light weight Access points 1262N.
I have used the internal DHCP server option in the controller for the AP's and client.
Port 1 of the WLC is trunked with the switch 2960. All is working fine
The problem comes when I remove the Ethernet cable from the management interface and restart the WLC. The AP's don't come back. If I don't restart the WLC the AP's remain.
On the other hand, when I leave the Ethernet cable connected to the management port with my pc and then reboot the WLC, the AP's appear.
Seems like whenever im not physically connected to the management port of the WLC and restart it, the AP's don't come back. The only way to make them come back again is to connect my PC to the management port.
Please help me. What seems to be the problem here ?
Best Regards,Hi,
All 20 Pc;s are in one area connected to the same AP im assuming. The PC;s are stationary, so didnt check for roaming, but generally my laptop connectivity is fine while roaming. It rarely disconnects but users have complained that it did disconncect a few times.
Please see below the WLC configuration:
User:Dawaa
Password:********
(Cisco Controller) >sh
(Cisco Controller) show>running-config
Notice: "show running-config" has been changed to be an alias to "show run-config".
Use "show run-config commands" to display the configuration commands.
Press Enter to continue or to abort...
System Inventory
NAME: "Chassis" , DESCR: "Cisco 2500 Series Wireless LAN Controller"
PID: AIR-CT2504-K9, VID: V01, SN: PSZ163602PD
Burned-in MAC Address............................ 20:3A:07:67:C3:00
Maximum number of APs supported.................. 15
Press Enter to continue or to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.3.101.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 1.0.0
Firmware Version................................. PIC 16.0
Build Type....................................... DATA + WPS
System Name...................................... tEthernet0
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 192.168.0.140
Last Reset....................................... Software reset
System Up Time................................... 0 days 1 hrs 23 mins 40 secs
System Timezone Location......................... (GMT +3:00) Baghdad
Configured Country............................... SA - Saudi Arabia
Operating Environment............................ Commercial (0 to 40 C)
--More or (q)uit current module or to abort
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +26 C
External Temperature............................. +30 C
Fan Status....................................... 4200 rpm
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
Number of Active Clients......................... 10
Burned-in MAC Address............................ 20:3A:07:67:C3:00
Maximum number of APs supported.................. 15
Press Enter to continue or to abort
AP Bundle Information
Primary AP Image Size
ap1g2 10596
ap3g1 11088
ap3g2 10968
ap801 7092
ap802 8428
c1130 5072
c1140 9288
c1250 6784
c1520 7852
c602i 3736
Secondary AP Image Size
ap1g2 10596
ap3g1 11088
ap3g2 10968
ap801 7092
ap802 8428
--More or (q)uit current module or to abort
c1130 5072
c1140 9288
c1250 6784
c1520 7852
c602i 3736
Press Enter to continue or to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Strong Password Check Features:
case-check ...........Enabled
consecutive-check ....Enabled
default-check .......Enabled
username-check ......Enabled
Press Enter to continue or to abort
Network Information
RF-Network Name............................. Dawaa
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Disable
Secure Web Mode RC4 Cipher Preference....... Disable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Enable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Multicast Address : 239.60.60.60
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
MLD snooping................................ Disabled
MLD timeout................................. 60 seconds
MLD query interval.......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
--More or (q)uit current module or to abort
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Enable
Mgmt Via Dynamic Interface.................. Enable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Web Auth Captive-Bypass .................. Disable
Web Auth Secure Web ....................... Enable
Fast SSID Change ........................... Disabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
CCX-lite status ............................ Disable
oeap-600 dual-rlan-ports ................... Disable
oeap-600 local-network ..................... Enable
Press Enter to continue or to abort
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE
1 Normal Forw Enable Auto 1000 Full Up Enable N/A
2 Normal Disa Enable Auto Auto Down Enable N/A
3 Normal Disa Enable Auto Auto Down Enable Enable (Power Off)
4 Normal Disa Enable Auto Auto Down Enable Enable (Power Off)
Press Enter to continue or to abort
AP Summary
Number of APs.................................... 14
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
AP6c20.56a0.b352 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:52 default location 1 SA 1
AP6c20.5666.e34a 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:4a default location 1 SA 1
AP6c20.56a0.b341 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:41 default location 1 SA 1
AP6c20.56a0.b4db_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:db Expiry Warehouse 1 SA 1
AP6c20.569a.59da 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:da default location 1 SA 1
AP6c20.5666.e2db 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:db default location 1 SA 1
AP6c20.568c.d530_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d5:30 default location 1 SA 1
AP6c20.5666.e2ca 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:ca default location 1 SA 1
AP6c20.5666.e354 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:54 default location 1 SA 1
AP6c20.569a.59fd 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:fd default location 1 SA 1
AP6c20.56a0.b346 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:46 default location 1 SA 1
AP6c20.56a0.b2f0 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b2:f0 default location 1 SA 1
AP6c20.568c.d1ec 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d1:ec default location 1 SA 1
AP6c20.56a0.b425 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:25 default location 1 SA 1
--More or (q)uit current module or to abort
AP Tcp-Mss-Adjust Info
AP Name TCP State MSS Size
AP6c20.56a0.b352 disabled -
AP6c20.5666.e34a disabled -
AP6c20.56a0.b341 disabled -
AP6c20.56a0.b4db_(Expiry) disabled -
AP6c20.569a.59da disabled -
AP6c20.5666.e2db disabled -
AP6c20.568c.d530_(Expiry) disabled -
AP6c20.5666.e2ca disabled -
AP6c20.5666.e354 disabled -
AP6c20.569a.59fd disabled -
AP6c20.56a0.b346 disabled -
AP6c20.56a0.b2f0 disabled -
AP6c20.568c.d1ec disabled -
AP6c20.56a0.b425 disabled -
Press Enter to continue or to abort
AP Location
Total Number of AP Groups........................ 0
Site Name........................................ default-group
Site Description.................................
AP Operating Class............................... Not-configured
RF Profile
2.4 GHz band.....................................
5 GHz band.......................................
WLAN ID Interface Network Admission Control Radio Policy
1 management Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
AP6c20.56a0.b352 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:52 default location 1 SA 1
AP6c20.5666.e34a 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:4a default location 1 SA 1
AP6c20.56a0.b341 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:41 default location 1 SA 1
AP6c20.56a0.b4db_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:db Expiry Warehouse 1 SA 1
--More or (q)uit current module or to abort
AP6c20.569a.59da 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:da default location 1 SA 1
AP6c20.5666.e2db 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:db default location 1 SA 1
AP6c20.568c.d530_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d5:30 default location 1 SA 1
AP6c20.5666.e2ca 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:ca default location 1 SA 1
AP6c20.5666.e354 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:54 default location 1 SA 1
AP6c20.569a.59fd 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:fd default location 1 SA 1
AP6c20.56a0.b346 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:46 default location 1 SA 1
AP6c20.56a0.b2f0 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b2:f0 default location 1 SA 1
AP6c20.568c.d1ec 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d1:ec default location 1 SA 1
AP6c20.56a0.b425 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:25 default location 1 SA 1
Press Enter to continue or to abort
RF Profile
Number of RF Profiles............................ 0
Out Of Box State................................. Disabled
RF Profile Name Band Description Applied
Press Enter to continue or to abort
AP Config
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP6c20.56a0.b352
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:a0:b3:52
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.111
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
--More or (q)uit current module or to abort
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
--More or (q)uit current module or to abort
IOS Version...................................... 15.2(2)JA$
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z0A6
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... dawaa
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 01 m 44 s
AP LWAPP Up Time................................. 0 days, 01 h 25 m 37 s
Join Date and Time............................... Wed Mar 13 16:10:25 2013
Join Taken Time.................................. 0 days, 00 h 02 m 19 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
--More or (q)uit current module or to abort
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 1c:e6:c7:04:7a:20
Operation Rate Set
1000 Kilo Bits........................... SUPPORTED
2000 Kilo Bits........................... SUPPORTED
5500 Kilo Bits........................... SUPPORTED
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... SUPPORTED
MCS 3.................................... DISABLED
MCS 4.................................... DISABLED
MCS 5.................................... DISABLED
MCS 6.................................... DISABLED
MCS 7.................................... DISABLED
MCS 8.................................... DISABLED
MCS 9.................................... DISABLED
MCS 10................................... DISABLED
--More or (q)uit current module or to abort
MCS 11................................... DISABLED
MCS 12................................... DISABLED
MCS 13................................... DISABLED
MCS 14................................... DISABLED
MCS 15................................... DISABLED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 13
--More or (q)uit current module or to abort
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 3
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 6
Extension Channel ......................... NONE
--More or (q)uit current module or to abort
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11,12,
......................................... 13
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
Legacy Tx Beamforming ..................... ENABLED
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
--More or (q)uit current module or to abort
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP6c20.56a0.b352
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
--More or (q)uit current module or to abort
MAC Address...................................... 6c:20:56:a0:b3:52
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.111
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
--More or (q)uit current module or to abort
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z0A6
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... dawaa
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or to abort
AP Up Time....................................... 0 days, 22 h 01 m 44 s
AP LWAPP Up Time................................. 0 days, 01 h 25 m 37 s
Join Date and Time............................... Wed Mar 13 16:10:25 2013
Join Taken Time.................................. 0 days, 00 h 02 m 19 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211n-5
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 1c:e6:c7:04:7a:20
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or to abort
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... DISABLED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
--More or (q)uit current module or to abort
MCS 15................................... SUPPORTED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 4
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
--More or (q)uit current module or to abort
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 17 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 36
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140
TI Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
--More or (q)uit current module or to abort
Legacy Tx Beamforming ..................... ENABLED
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
--More or (q)uit current module or to abort
CleanAir Capable......................... No
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Press Enter to continue or to abort
Cisco AP Identifier.............................. 1
Cisco AP Name.................................... AP6c20.5666.e34a
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:66:e3:4a
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.39
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
--More or (q)uit current module or to abort
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z09V
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 03 m 17 s
AP LWAPP Up Time................................. 0 days, 01 h 28 m 23 s
Join Date and Time............................... Wed Mar 13 16:10:26 2013
Join Taken Time.................................. 0 days, 00 h 02 m 04 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
--More or (q)uit current module or to abort
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 54:78:1a:f2:51:c0
Operation Rate Set
1000 Kilo Bits........................... SUPPORTED
2000 Kilo Bits........................... SUPPORTED
5500 Kilo Bits........................... SUPPORTED
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... SUPPORTED
MCS 3.................................... DISABLED
MCS 4.................................... DISABLED
MCS 5.................................... DISABLED
MCS 6.................................... DISABLED
MCS 7.................................... DISABLED
MCS 8.................................... DISABLED
MCS 9.................................... DISABLED
MCS 10................................... DISABLED
MCS 11................................... DISABLED
--More or (q)uit current module or to abort
MCS 12................................... DISABLED
MCS 13................................... DISABLED
MCS 14................................... DISABLED
MCS 15................................... DISABLED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 13
--More or (q)uit current module or to abort
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 2
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 1
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
--More or (q)uit current module or to abort
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11,12,
......................................... 13
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
Legacy Tx Beamforming ..................... ENABLED
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
Coverage exception level................... 25 %
--More or (q)uit current module or to abort
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Cisco AP Identifier.............................. 1
Cisco AP Name.................................... AP6c20.5666.e34a
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:66:e3:4a
--More or (q)uit current module or to abort
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.39
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
--More or (q)uit current module or to abort
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z09V
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 03 m 17 s
--More or (q)uit current module or to abort
AP LWAPP Up Time................................. 0 days, 01 h 28 m 23 s
Join Date and Time............................... Wed Mar 13 16:10:26 2013
Join Taken Time.................................. 0 days, 00 h 02 m 04 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211n-5
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 54:78:1a:f2:51:c0
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
9000 Kilo Bits........................... SUPPORTED
--More or (q)uit current module or to abort
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... DISABLED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
MCS 15................................... SUPPORTED
--More or (q)uit current module or to abort
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 4
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
--More or (q)uit current module or to abort
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 17 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 64
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140
TI Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
Legacy Tx Beamforming ..................... ENABLED
--More or (q)uit current module or to abort
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
--More or (q)uit current module or to abort
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Press Enter to continue or to abort
Cisco AP Identifier.............................. 2
Cisco AP Name.................................... AP6c20.56a0.b341
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:a0:b3:41
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.120
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
--More or (q)uit current module or to abort
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z09Y
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... dawaa
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 07 m 08 s
AP LWAPP Up Time................................. 0 days, 01 h 31 m 05 s
Join Date and Time............................... Wed Mar 13 16:10:26 2013
Join Taken Time.................................. 0 days, 00 h 02 m 19 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
--More or (q)uit current module or to abort
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 1c:e6:c7:04:81:f0
Operation Rate Set
1000 Kilo Bits........................... SUPPORTED
2000 Kilo Bits........................... SUPPORTED
5500 Kilo Bits........................... SUPPORTED
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... SUPPORTED
MCS 3.................................... DISABLED
MCS 4.................................... DISABLED
MCS 5.................................... DISABLED
MCS 6.................................... DISABLED
MCS 7.................................... DISABLED
MCS 8.................................... DISABLED
MCS 9.................................... DISABLED
MCS 10................................... DISABLED
MCS 11................................... DISABLED
--More or (q)uit current module or to abort
MCS 12................................... DISABLED
MCS 13................................... DISABLED
MCS 14................................... DISABLED
MCS 15................................... DISABLED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String .............. -
Query About Cisco WLC 2504 TDLS
Dear Friends,
One of my client want to encrypt data over the wireless. I have cisco WLC 2504 IOS Version 7.2.0.0.
Please help me on this. I think by-default data encrypt is enable. If not so how can I enable it. If I enable it is there any impact to my wireless user's.
Please help me out .....
Thanks & Regards,
Rahul WankhadeHow to enable:
http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html#enable
Impact:
2500, WiSM2, WLC2—These platforms by default will not contain DTLS. To turn on data DTLS, you must install a license. These platforms will have a single image with data DTLS turned off. To use data DTLS you will need to have a license.
http://www.cisco.com/c/en/us/products/collateral/wireless/2500-series-wireless-controllers/data_sheet_c78-645111.html
AS per cisco: Encryption limits throughput at both the controller and the access point.
Regards
Dont forget to rate helpful posts -
Splash Page in WLC 2500 Series
Can someone tell me if there is Splash Page feature in the 2500 WLC ? I cannot find any Cisco document which says it has that feature ?
Yes, Its available.
Here is a link that points to a configuration guide for a wlc 2500, 7.5.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/config_guide/b_cg75.pdf
"The splash page web redirect feature is available only for WLANs that are configured for 802.1X or
WPA+WPA2 Layer 2 security with 802.1x key management." -
Compatible APs for Cisco WLC 2504
Is the cisco wlc 2504 compatible with the AIR-CAP-3602l and if so what firmware would i need to be running on the WLC ? My firm rushed out and bought a mesh solution without doing their homework
Hi Doug,
Data sheet for 3602 access point shows it support 2500 series WLC. Please refer to the link below.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps11983/data_sheet_c78-686782.html
You may need firmware version above 7.2 to support 3602.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Hope that helps
Regards
Najaf
Please rate when applicable or helpful !!! -
Configuration of Cisco WLC 2504 with Local LAN static IP and DHCP
I want to configure Cisco WLC 2504 with Local LAN static IP and WLC 2504 with DHCP so that APs can be connect with controller.
Currently i am using WLC 2504 with DHCP so can anyone suggest how to do that..Hi Sandeep
The info is correct, if we're using code below 7.3.101.0.
This issue is fixed via the below bug id.
CSCto01390 Unable to ping AP's directly connected to a 2500 controller
check the fix that is updated on 7.4, 7.5 RNE.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn75.html
Note
Directly connected APs are supported only in Local mode.
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps11630/data_sheet_c78-645111.html
For quick and easy deployment Access Points can be connected directly to 2504 Wireless LAN Controller via two PoE (Power over Ethernet) ports
Thanks
Saravanan -
Hi friends,
I am planning to have a wireless environment for a corporate company. I would like to have a Cisco wireless LAN controller 2100 series and 15 numbers of cisco aironet 1142 n access point. Since wireless is gonna be a very important medium for the premises, I am planning to have high availability for the 2100 series WLC.
With this scenario I am having the following of queries?
1. Does high availability is supported with WLC 2100 series or need to go for an hihger end WLC's? It would be great if I am guided with some documents on this?
2. My wired switching infrastructure at the core is running with GLBP. Can I connect the both WLC in each switch in an dual home architecture?
3. Is there any pre-requistes for doing the high availability for the WLc's?
4. Yet another company that is close to me do have the same architecture for wireless infrastructure, except that they have cisco WLC as 5508 and Cisco aironet 1142n access point. All the end points NIC adapters that they have support a/b/g standard. But with an n series they continously report low signal strength, the reason for this still unknown?
But the tech documents of 'n' series access point claims that they support, 300Mbps within 33 feet and 200 Mbps within 66 feet.
They are having 2 nos of Cisco 1142n access point for every 30 feet but still they are facing low signal strength. Also there workspace are all cubicles and without any interference.
It would be great if I am guided on this issue also?
Regards,
Karthik Anbumani/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Hi Karthik,
You can build this HA solution based on the 2100 controllers. And if you want HA for 15 access points you need two 2125 controllers. But I will suggest that you consider the 5508 controller since that is a more future proof hardware and will give you more features that you might want to use such as Office Extend.
Right now there is a bundle available for one 5508 with 10 x AIR-LAP1142 and the GPL price for that bundle is USD 31,424. And you should consider if you need the HA solution or if you are covered by the onsite support. In the product list below I have used the regulatory domain E and power cable for Europe. Make sure that you get this correct for your country. This is a limited offer ending August 1st 2010. You also need the additional 5 access points or more if you want Office Extend.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Also consider that the 2100 series only have FastEthernet interfaces so you will not be able to utilize the full 11n throughput.
1 x 5508 with 10 x 1142:
Product
Description
Quantity
Price
Lead Time
AIR-CT25-1140E10
802.11a/g/n ESTI Cfg5508-25 10AP WCS Demo Promo ends 8/1/10
1
24,595.00
14 Days
AIR-CT5508-25-K9Z
5508 Series Controller for up to 25 APs
1
0.00
14 Days
AIR-PWR-5500-AC
Cisco 5500 Series Wireless Controller Redundant Power Supply
1
1,495.00
14 Days
SWC5500K9-70
Cisco Unified Wireless Controller SW Release 7.0
1
0.00
14 Days
AIR-PWR-CORD-CE
AIR Line Cord Central Europe
1
0.00
14 Days
AIR-LAP1142N-E-K9Z
Manufacturing Level PID - AIR-LAP1142N-E-K9
10
0.00
14 Days
S114RK9W-12421JA
Cisco 1140 Series IOS WIRELESS LAN LWAPP RECOVERY
10
0.00
LIC-CT5508-25
25 AP Base license
1
0.00
14 Days
LIC-CT5508-BASE
Base Software License
1
0.00
14 Days
WCS-CD-K9Z
CD With Windows And Linux. No License.
1
0.00
14 Days
CON-OSP-CT25E10
ONSITE 24X7X4 802.11a/g/n ESTI Cfg: 5508-25; 10APs;
1
0.00
CON-OSP-CT0825
ONSITE 24X7X4 Cisco 5508 Series
1
2,944.00
CON-OSP-1142EK9Z
ONSITE 24X7X4 802.11a/g/n Fixed AP
10
2,390.00
Total LeadTime: 14 Days Total Price: USD 31,424.00
Total LeadTime: 14 Days Total Price: USD 31,424.00
2 x 2125 with 10 x 1142:
Product
Description
Quantity
Price
Lead Time
AIR-WLC2125-K9
2100 Series WLAN Controller for up to 25 Lightweight APs
1
8,995.00
21-35 Days
CAB-AC-C5-EUR
AC Power Cord, Type C5, Europe
1
0.00
14 Days
SWLC2100K9-70
Cisco Unified Wireless Controller SW Release 7.0
1
0.00
14 Days
ASA5505-PWR-AC
ASA 5505 AC Power Supply Adapter
1
0.00
14 Days
SSC-BLANK
ASA 5505 SSC Blank Slot Cover
1
0.00
14 Days
CON-OSP-AC2125K9
ONSITE 24X7X4 WLAN Controller for for Retail
1
1,656.00
Total LeadTime: 21 - 35 Days Total Price: USD 10,651.00
Product
Description
Quantity
Price
Lead Time
AIR-WLC2125-K9
2100 Series WLAN Controller for up to 25 Lightweight APs
1
8,995.00
21-35 Days
CAB-AC-C5-EUR
AC Power Cord, Type C5, Europe
1
0.00
14 Days
SWLC2100K9-70
Cisco Unified Wireless Controller SW Release 7.0
1
0.00
14 Days
ASA5505-PWR-AC
ASA 5505 AC Power Supply Adapter
1
0.00
14 Days
SSC-BLANK
ASA 5505 SSC Blank Slot Cover
1
0.00
14 Days
CON-OSP-AC2125K9
ONSITE 24X7X4 WLAN Controller for for Retail
1
1,656.00
Total LeadTime: 21 - 35 Days Total Price: USD 10,651.00
Product
Description
Quantity
Price
Lead Time
AIR-LAP1142-EK9-PR
LAP1142 Controller Based E Reg Domain
1
9,950.00
14 Days
S114RK9W-12421JA
Cisco 1140 Series IOS WIRELESS LAN LWAPP RECOVERY
1
0.00
AIR-LAP1142-EBULK
BOM LEVEL PID FOR BULK PACK
10
0.00
14 Days
CON-OSP-LAP1142E
ONSITE 24X7X4 802.11a/g/n Fixed Unified AP; ETSI
10
2,390.00
CON-OSP-L1142E0P
ONSITE 24X7X4 802.11a/g/n LWAPP AP EU Cnfg-Promo Pk
1
0.00
Total LeadTime: 14 Days Total Price: USD 12,340.00
Total LeadTime: 21 - 35 Days Total Price: USD 33,542.00
Regards,
André -
Cisco wlc ios 7.2 with clients windows 8 can not authenticate with 802.1x
Hello my name is Ivan:
I have a solution a unified solution wireless with a cisco wlc 7.2 and ap cisco. My issue is the follow:
My users are using laptops with OS windows 8, and they can not access to the network wireless because they authenticate in to the network using 802.1x wpa/wpa2 with tkip or aes.
I find a bug in the ios of the wlc. The number is CSCua29504. I would not to change the drivers in the laptop to join the users in to the solution.
Please is possible to find any software to do the upgrade in the wlc? Or perhaps we need to do an upgrade in to cisco lightweight access point?
Please help me in this issue.
Regards
IvanBug ID CSCua29504 has been fixed in WLC firmware 7.0.235.3, 7.3.101.X or 7.4.100.X.
So if you are NOT running any one of these codes, then yes. Upgrade your firmware is your solution.
Fixed in: (12)
7.4(100.0),7.4(1.20),7.3(112.0),7.3(101.0),7.3(1.67)
7.2(111.3),7.2(111.1),7.2(110.4),7.0(236.0),7.0(235.3)
Maybe you are looking for
-
Trouble with slideshow in TV Out
Hey guys, for some reason I can't display pictures on my TV. I have a Apple AV cable. I can watch my videos but when I try to run a slide show. Nothing happens. Can anyone help?
-
Binding to an Entire Sequence, How?
I would like to know if ANY member of a sequence updates. For example: public class Subject { var students: Student[]; }Then I wanted to do an "all student" calculation, this if any are added or removed work do the calculation again). public clas
-
Where do I find the cheapest and most reliable Microsoft office to download onto my new IMac
Where can I find the cheapest and most reliable Microsoft office to download onto my IMac?
-
Lightroom Crashing on Export, sometimes on import, lots of info provided
Windows 7 64bit I'm not technically naive when it comes to computers, building them and installing software but I've hit upon this issue which I just can't seem to resolve. I'd like the Tech guys at Adobe to have a proper look into this please. I've
-
When the time in condition record is set to 3, then will be print program be called while saving the document? I am case even though the time it set to 3. Output type is proposed and saved as TIME 4(send immideately). But the form is not getting prin