Cisco WLC : AP automatic configuration for flexconnect parameters and ap group
Hello !
Is there a way to configure cisco WLC to automatically set flexconnect parameters such as Vlan support and Native Vlan ID when an access point join the controller ?
Same question to assign the access point to a specific AP Group ?
PS: The access points are set with usine parameters and the WLC is in version 7.4
Thank you for your answers !
Stephane
To my knowledge these features are not available in 7.4, but from what I understand 8.0 will have similar features. I can say that 7.6 has global commands, not sure if its part of 7.4.
If it is you can navigate there Wireless>Access Points>Global Configuration you can do things like configure your primary and backup controllers, set login credentials, pre-download images to AP's.
Please rate if you find the information helpful.
HTH
Similar Messages
-
Configuration of Cisco WLC 2504 with Local LAN static IP and DHCP
I want to configure Cisco WLC 2504 with Local LAN static IP and WLC 2504 with DHCP so that APs can be connect with controller.
Currently i am using WLC 2504 with DHCP so can anyone suggest how to do that..Hi Sandeep
The info is correct, if we're using code below 7.3.101.0.
This issue is fixed via the below bug id.
CSCto01390 Unable to ping AP's directly connected to a 2500 controller
check the fix that is updated on 7.4, 7.5 RNE.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn75.html
Note
Directly connected APs are supported only in Local mode.
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps11630/data_sheet_c78-645111.html
For quick and easy deployment Access Points can be connected directly to 2504 Wireless LAN Controller via two PoE (Power over Ethernet) ports
Thanks
Saravanan -
Client context error message while configuring for social login and personalization
Hi,
I am getting the below exception while configuring for social login and personalization.
27.12.2012 11:21:25.463 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.day.cq.wcm.core.impl.designer.DesignerImpl No design at /etc/design/cloudservices. Using default.
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.oauth2.Oauth2Helper Problems while creating connection.
27.12.2012 11:21:46.549 *WARN* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.oauth2.Oauth2Helper token was null or not in UNAUTHORIZED state:1
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.servlet.OAuthProfileImportServlet requestAccessToken: could not retrieve user
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587506549] GET /etc/cloudservices/facebookconnect/sample_fb.login.html HTTP/1.1] com.day.cq.wcm.core.impl.designer.DesignerImpl No design at /etc/design/cloudservices. Using default.
27.12.2012 11:21:48.455 *ERROR* [127.0.0.1 [1356587508455] GET /etc/clientcontext/default/contextstores/profiledata/loader.json HTTP/1.1] org.apache.sling.engine.impl.SlingRequestProcessorImpl service: Uncaught SlingException org.apache.sling.api.SlingException: An exception occurred processing JSP page /libs/cq/personalization/components/profileloader/command/load/load.json.jsp at line 41
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.handleJspExceptionInterna l(JspServletWrapper.java:574)
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.handleJspException(JspSer vletWrapper.java:499)
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.service(JspServletWrapper .java:451)
at org.apache.sling.scripting.jsp.JspServletWrapperAdapter.service(JspServletWrapperAdapter. java:59)
Thanks,
Shankar .AHi Shankar,
Any luck with this issue. I am also seeing the same issue
Thanks
Pushparajan -
I was automatically renewed for a subscription, and I didn't realize it until I got the renewal message. How do I get this charge reversed. It was renewed yesterday!
All purchases are considered final, but you can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
I can not adjust the automatic download for music, apps and books.
This is a problem by my iPhone and my IPad.
Where is the mistake??Settings > Store > Change the settings you want.
-
Setup and configuration for system monitoring and IT Reporting for Java sys
Hi all,
How to setup and configuration for system monitoring and IT Reporting for Java system ?
How to connect Java system to Solman system?
Regards,
NeniHI,
What is your OS? You can use SAPCCMSR.exe to monitoring IT Reporting Java system on Solman.
Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
I hope this help -
Excise modvat accounts not defined for DLFC transaction and excise group
Dear Experts,
Iam raising this question after checking all the contents related to Sub Transaction type in SDN.
My prob is: for raw material sales scenario i have created order delivery and invoice. For Invoice i have done account determination with a different G/L in VKOA. Now i have to create an excise invoice and the accounting entry for central ED on sales should go to different G/L account. for account determination i have done the following settings:
Maintained Sub transaction type in
IMG -> Logistics - General -> Tax on Goods movement -> India -> Basic Settings
->Maintain Sub Transaction types
IMG -> Logistics - General -> Tax on Goods movement -> India ->
Account determination -> Specify Excise Accounts per Excise Transaction.
Here against DLFC sub transaction Type is maintained..
Also
IMG -> Logistics - General -> Tax on Goods movement -> India -> Account determination -> Specify G/L Accounts per Excise Transaction
Here maintained Excise group with DLFC Company Code subtransaction type, chart of accounts and all required GL Account .
But when the iam creating Excise Invoice in J1IIN and clicking on Subtransaction type-F4, no entries are shown. No values found is the message in green. Message no. DH801
If i use subtransaction type and enter billing document and enter, the following error message comes:
"Excise modvat accounts not defined for DLFC transaction and excise group"
Iam unable to understand why the subtransaction type maintained is not showing in TCODE J1IIN?
RegardsFor the error message DH801, please check note 840911
Excise modvat accounts not defined for
DLFC transaction and excise group"
Please check your G/L assignments "Specify G/L Accounts per Excise Transaction"
thanks
G. Lakshmipathi -
SAB BO 4.1 SP1
Does it have an RESTful API to schedule a Webi report with the parameter to specify a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?Hello Ricardo,
have you try a call like this one ?
<schedule>
<name>"test"</name>"
<format type=\"webi\"/>
<destination>
<inbox>
<to>userId1,userId2,userId3,groupId1,groupId12</to>
</inbox>
</destination>
</schedule>
Regards
Stephane -
Excise modvat accounts not defined for CEIV transaction and excise group`
Dear All,
During outgoing excise cancellation i am getting the massage
`Excise modvat accounts not defined for CEIV transaction and excise group`
I have checked the following,
GL is assigned in excise account determination.
the transection type CEIV is assigned to account field cenvat sup.
Please put some light on this issue.
Thanks in advance.
deeptiDear Deepti
Follow the IMG Path.
Logistics-General --> Tax on Goods Movements --> India --> Account Determination --> Specify Excise Accounts per Excise Transaction.
Here you have to define respective G/L accounts for "Excise Transaction Type CEIV". Check with your FI Guy if you have any clarification.
Thanks
G. Lakshmipathi -
Cost Variance account change in org parameters and cost group
Hi,
Bussiness came to know that cost variance account setup as of now in org parameters and cost group are wrong and need a correction.
But already transactions happened in this org.
As per metalink NOte: 1144105.1 , saying to create a new org is the only solution.But any one know a best solution which can be used instead of a new org creation.
Thanks
vasudha.I guess no other option...as far as i know
HTH
Mahendra -
One WLC AIR-CT2504-K9 for Main office and 3 Branches
Hi ,
I need to configure a WLC AIR-CT2504-K9 with the followings requiremets:
1.- There is a main officce where the WLC and 7 LAPs will be installed.
2.- There are 3 branches; one LAPs in every branch will be installed.
3.- SSIDs for internal users and guest will be the same in each office.
Is it possible to set this scenario ?? (see complete info in table)
In the past I configure some WLC 2100 but I noticed some difference with this new WLC-CT2504
one of the differences that kept my attention were regarding ap-manager interface (not shown)
and virtual interface ( shown as NOT SUPPORTED)
Should I set ap-manager interface or is enough with managment interface ?
why the message "Not support" in virtual interface ??
How can I use one port for two interfaces (as is proposed in table), if I try to do this a message error is displayed
"Error setting AP Manager interface".
iF I set one interface and associate to one port (Enable) I can not set second interface in the same port so remains disable
This model of WLC just has 4 Ports.
I have read last config guide but is not clear for me because there is no examples of this kind of scenario.Hi Scott,
I configured virtual interface from startup configuration wizard.
(Cisco Controller) >show interface detailed virtual
Interface Name................................... virtual
MAC Address...................................... d0:c2:82:e3:8e:c1
IP Address....................................... 1.1.1.1
DHCP Option 82................................... Disabled
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. No
regards, -
We recently purchased a second 5508 wireless controller (both licensed for 100+ AP's). What is the easiest way to configure and add the second controller so I can split the load between the 2 controllers and provide failover capability? I do not want to run in an active/standby mode since that will effectively cut our AP capacity by half even with both controllers running.
Should I just manually configure the new controller (long and drawn out process to configure all the parameters), backup the current controller configuration and import to the second controller (then change the ip address) or is their an easier way to cause the two controllers to synchronize the configurations?
We are currently running 7.0.240.0 on our active controller and I would rather not upgrade it until we get the new controller online so I can have less downtime and fail AP's between controllers.
What can you recommend?
JimI'm assuming then, when I update the software on the controllers I won't be able to choose which controller is primary for an AP anymore and will lose access to the 100 AP licenses (and the capability to have 100 AP's registered, 100 licenses on each Controller).
Read the Deployment Guide. It should mention that you can choose which controller is the "primary" and which one is the "secondary".
If I'm not concerned about quick failover can I still assign a primary and secondary controller for each AP and utilize all 200 AP licenses that are split between the 2 controllers?
You sure can. But this "old school" method is a very expensive method. Why? Because this means that you have two controllers with similar AP licenses. The newer AP SSO means one controller has a full license and the other has only an HA SSO license, which is a lot cheaper. -
Automatic programme for Down payments and Credit memos & pratial payment
Hi Guysis
vendor credit memo is 5000rs when i Excute the Automatic programme for the APP it asks enter payment method for the Incoming payments.
how to slove this error.
vendor down payments Automatic payment programme is possible or not
please give sollution Immdieatly.
with regards
srinivasHi,
rao
i understood your problem
we can do it in a different way.
i think you have a due amount and one credit memo..
if it is ok
then in F110
GO to proposal change and select first the invoice document and REALOCATE then change the bank details
for ex.
payment method M
bank SBI
account curr
and press shift+F1
and go back
select second one that is credit memo
and REALOCATE
there you can find the bank
select that and shift+F1
thus you do the payment
this can solve your problem
thank you
Shankarchitupolu -
ALE Configuration for PEXR2002 IDoc and PAYEXT message type sending to XI
Hi all,
I need ALE Configuration for PEXR2002(Basic Type) IDoc , it's message type PAYEXT.
I don't know ALE Configuration for sending data from SAP IDS to SAP XI.????
I need ALE Configuration doc/pdf??
Please give me some guidline for this..
Regards,
UmeshUmesh,
I was wondering if you have had any luck creating the configuration for PEXR2002 Idoc, PAYEXT message types, and sending the result set to XI.
I need to perform the same task within our R3 environment using the FTP protocol in XI to send the file to the Bank to be processed.
Any help or direction would be great.
Thanks,
Dave -
Nominal configuration for boot drive and internal RAID setup
Hello, I'd appreciate some advice on the following please.
I'm planning the build of a Mac Pro to act mainly as a photo editing workstation.
Considering the following disc setup:
Bay 1. 500GB with two partitions - 150GB for OS X and remaining for applications
Bay 2. 250GB XP/Vista for occasional use. All Windows apps/data quarantined on this disk.
Bays 3 and 4. 2x 500GB RAID0 (backed up externally) for data and workspace.
WRT RAM, I've read that 4 matched DIMMs in the same riser is the optimal config, so looking at 4x 1GB.
I'd be grateful for any comments as to whether I'm on the right track here.
Thanks
Ben
Mac Pro Mac OS X (10.4.10)I set up a similar configuration for photo editing. First, partitions are not as useful as they were in the pre OS X era. Just load your OS and all applications on the same drive as there is no benefit, as far as I know, to separating them into partitions. Second, your 4 X 1GB RAM should be split between the two risers, not on the same riser. Put two DIMMs in the first two slots of each riser. 4 X 1GB hits a sweet spot in the cost/benefit analysis as long as you don't need more than 4GB. I use Lightroom extensively and 4GB is plenty.
Maybe you are looking for
-
Hyperlink to another bi publisher report in 10g
I am using Bi Publisher 10g. I want to build a bi publisher report that makes a link to another bi publisher report. I created a Hyperlink in my template and it works fine, however the url that I am using is the full path to the xdo resource and thei
-
ITunes 10.2.1.1 crashes when using the visualizer
Running Win7, completely up to date, NVIDIA GeForce G210 with current drivers. When I start up the visualizer iTunes runs for a few songs and then suddenly goes silent, screen goes black, and my entire system freezes requiring a hard power-down. Th
-
Creating synonys for all table
i want to create synonyms for all atbles.the synonyn name and table name are same.instead creating one by one synonym i wnat to create all synonyms at a time. 1)select 'CREATE PUBLIC SYNONYM'||' '||'test'||' '||'for' ||' '||'test' from dual 2)select
-
Problem with Frames in Timeline
Hey, I'm using Final Cut Pro HD version 4.5. And I'm having a problem that is somewhat difficult to explain. When I drag the end of a clip, to take a few frames off of it (or add more frames), it skips from taking say 2 frames, to 6 frames. Not allow
-
Unable to delete AddressBook-v22.abcddb
I want to remove the existing addressbook and create a fresh empty addressbook. Under users/username/library/application support/addressbook is a file called AddressBook-v22.abcddb. I no longer want to use that file but unable to delete it. Please c