Cisco Works does note recognise 7204VXR NPE-G2 variant IOS
I am trying to load a 7200 NPE-G2 variant IOS into our Cisco Works software repository in order to then upload it to a 7204VXR. When browsing to the folder containing the IOS and then attempting load, Ciso Works does not recognise the NPE-G2 variants (with file names starting c7200p), however it does recognise vanilla c7200 variants.
We are running with LMS 2.6, RME 4.0.5, DFM 2.0.6
Do we need to upgrade?
You will need to update your RME device packages to the latest versions. Go to Common Services > Software Center > Device Update, and check the boxes next to RME and Common Services. Download and install all available packages, then you should be able to add the c7200p image to the repository.
Similar Messages
-
IPhoto does not recognise iPhone since upgrade to iOS 5.1
iPhoto does not recognise iPhone since upgrade to iOS 5.1. Have tried every suggestion I could find but to no avail. Using iPhoto 9.3 and IOS 5.1. This has only started happening since upgrade to IOS 5.1
Image capture does not recognise iPhone device either, yet iTunes synchronises okAny helpful suggestions to resolved this issue welcome!
-
my wifi is not connected on my iphone and when i try to connect it does not recognise my password
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.Hi Elba,
Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
Completely baffled by it. Any idea what could be the reason?
Kind regards,
Nik -
Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
Sometimes this happens, because the camera is not properly charged. In that case connect the camera to a charger or use a card reader. -
My laptop with macbook pro with maverick was working fine with a dongle AVERTV VOLARGO to capture tv programmes but now with yosmite it does not recognise what options have
I also understand that there is particular software 'TRIM' a software introduced by CINDORI SOFTWARE which will disable KEXT SIGNING a security application of YOSEMITE ,Is it the only option or there are any better options for this
-
Cisco Prime does not update devices in "Device Work Center"
Hi everyone.
I have a problem that is bugging me a lot.
I'm working in Cisco Prime 2.0 and we have a big problem.
If I run a discovery and find all a lot of switches, the switches is discovered and are fully managed via SSH and SNMP.
We are using both 2960S, 2960x and a lot of old 2950:s.
We are replacing all 2950:s to some new 2960 model.
The big problem is that when we replace the old 2950:s we reuse the same IP-address (so our customly built programs can find them again), Cisco Prime DOES NOT update the model of the switches. The switches are still in the Device Work Center and are still in recognized as a 2950.
If I mark the switch to view more info in Device Work Center the Unique Device Identifier says that it is a new 2960s/x but the model is still recognized as a 2950 so Prime can obviously find a manage the switch and update "some" info, but not the device itself.
Does someone have the same problem or do I need to delete all 2950:s and do a new discovery so Prime understand?
EDIT
I have now an example.
Please look at the image.Hi,
I ran into same issue,Yes this is known issue,there is a open defect id and is fixed in upcoming releases.
I deleted existing devices and rediscovered,but note you will loose all your configurations related to existing deive model.
Regards -
My iPad suddenly does not recognise my you tube password yet it works on my laptop
My iPad suddenly does not recognise my you tube password yet it works on my laptop.
Find Apple ID
https://iforgot.apple.com/applied
Cheers, Tom -
My bluetooth just keeps searching on my new iPhone 5s and does not recognise my car bluetooth which was working perfectly with my 4s.
Maybe it's because of Mfi approving (https://developer.apple.com/programs/mfi/)
I have Sony bt GPS but can't use it with my wifi iPad because it's not approved. -
Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?
Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time. Then restart the MacBook Pro. If it still will not scan, try using Image Capture from Finder > Applications and see if that will work. If not, contact Xerox about updated drivers.
-
My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please
Hey there mbarikiwa,
If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
OS X Yosemite: If a USB device isn’t working
If the device is connected to a USB hub:
Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on.
If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord:
Try plugging the device directly into your computer’s USB port or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding.
If you have many devices connected to your Mac:
Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps.
Verify that the device appears in System Information:
Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information.
In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps.
Restart apps:
Quit and restart any apps that use the device.
Restart your Mac:
Choose Apple menu > Restart.
Check your device’s USB connection
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Any ideas why my Apple TV does not recognise my iTunes password, when all other devices, including these communities are good with it?
Hi Mick2291,
Thanks for visiting Apple Support Communities.
I'd suggest restarting, and then restoring, your Apple TV if the issue persists:
Apple TV (2nd and 3rd generation): How to restart your Apple TV
http://support.apple.com/kb/HT3180
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Best Regards,
Jeremy -
I have updated my laptop to windows 8.1. My laptop now does not recognise my iphone, nano or ipad? I have uninstaled and reinstalled. I can downlaod pictures off my iphone but not connect to itunes?
Please helpiOS: Device not recognized in iTunes for Windows
-
Server does not recognise user and password
unable to email photos. server does not recognise user and password
This is a quite interesting issue. Perhaps it may help if we start by trying to understand what caused the issue and then we will consider how you might recover from it.
One of the things that Cisco wanted to do as they released version 15.0 was to improve the security of passwords in IOS. So they designed and implemented a new "type 4" password which they intended to replace the previous "type 5" password used for enable secret or for username secret passwords. So in those versions of 15.0 if you configure enable secret or username secret for passwords the IOS would create the new type 4 password.
Then you reacted to some problem and loaded an older version of IOS. 12.2(55) does not understand the type 4 passwords. So as your switch booted on this version of code and it read lines in the startup config that had type 4 passwords it did not understand them and marked them as invalid input. So the result is that your switch does not have an enable secret and perhaps usernames do not have passwords.
I do not know if you will be able to recover without doing password recovery but I have a suggestion which you can try. See if you can login on the console. It may depend on how your switch was configured whether it will let you do that and whether it will let you get to enable mode on the console. The default behavior was to allow the console to get to enable mode without a password. If your configuration includes aaa authentication enable default enable then the console may not work and in that case I believe that your only alternative will be password recovery.
HTH
Rick
Maybe you are looking for
-
How to get the open billing documets specific to Plant
Dear All, I want list of Billing documets which is open i.e. not released to accounting according to plant not payer.VF05 OR VTX3 are not suitable.Please let me know how to get this? Regards, Murali.
-
Assign an output type to a message type
Hi all, How do I assign an output type to a message type? Thanks in advance. JM
-
Viewing photos imported with camera connector
Hello, I just purchased a camera connector and was immediatedly able to import photos from my camera with no problems. However, the manual states that I should be able to view the photos by (1) Choosing Photos > Photo Import, and then choose the roll
-
I'm trying to upgrade to the latest version of icefaces and it says in the install notes to: On Windows only, manually remove the JSC2 internal cache files or the installation of the newer extension library will fail silently. Where are the 'JSC2 int
-
Hi all, just got a Curve from Tmobile, and have found that Tmobile does not support Blackberry software above 4.2, thus I don't have Documents to Go bundled. Anyone found a 3rd party software to store and view Word documents that they have had luck