Cisco Works - SNMP for Pushing instead of TFTP

Is there a setting in Cisco Works I can change for getting SNMP used instead of TFTP for pushing configuration changes? I recently did a push to over
4500 network devices (routers & switches) in my network and found that Cisco Works was using TFTP instead of SNMP. Is there a setting I can change
for getting SNMP used instead of TFTP?
Also when I look at running config on the devices, they do NOT show the name of the "profile (TACACS Account)" used to log into the device by Cisco Works. Thus the Audit function could not pickup the profile that made the changes.
Currenting using LMS 3.2.
Thanks

LMS uses TFTP triggered by SNMP. There is no way to use SNMP exclusively to push config changes. LMS will use one of either SNMP/TFTP, SSH, telnet, or RCP. This is set under RME > Admin > Config Mgmt > Transport Settings.
If you are not using telnet or SSH to do config management (i.e. archive, Netconfig, etc.), then the running config will not relfect a username logging into LMS to make config changes.

Similar Messages

Cisco Works SNMP write community string Incorrect

Hi,
I have installed Cisco Works at my organisation. Under RME -> Inventory -> Import status -> Device Attribute Error: I am getting: Incorrect SNMP write community strings. Even though i know perfectly well the SNMP write community string is correct. To prove that, if I delete the device and then add the same device using the same SNMP write community string it works fine. then a couple of days later, it comes up with the same message "SNMP write community string is incorrect". I have increased the time and retries for the SNMP settings at the ANI server, still it has not resolved the issue.
Please help

I have sharched the CCO bug toolkit and according them, it was a know issue for verion 3.4 but it has been fixed for Ver RME 3.5. But we are currently running RME 3.5, therefore it does not make any sense.

Cisco works windows 2000 server (IDS)

I installed cisco works prepared for monitoring IDS Sensor, but i have some problem Access Apache windows folders
Error: The requested URL cannot be reached because client denied by server configuration: c:/program files/cscopx/htdocs/csconm
Description: 403 Forbidden is the HTTP status code returned by the Apache web server when either the user or the server itself has insufficient access rights to the URL.
You are not allowed access to this URL due to insufficient access rights. This may be due to an incorrect installation of the product. Please refer to your product's installation guide.

Please try the following:
Stop Daemon Manager. Type in "c:\net stop crmdmgtd " in the Windows command line
Then go to: NMSROOT\lib\web\conf\allow_files.conf (where NMSROOT is Progra~1\CSCOpx)
Please check if this file has the following entries
/index.html
/login.html
/mainPanel.html
/JSP/cmf/admin/index.jsp
/login1.html
Afterwards, restart Daemon Manager. Type in "c:\ net start crmdmgtd" in the CLI.
And try to access the server again.
HTH,
-J

Cisco works 3 vtp servers

Hello
We having single network total 3 L3 switches in server mode and 80 L2 transperent and claint modes switches, Total switches are same vtp ,L3 ip address 10.66.1.1,1.60 and 1.120,on cisco works topology services showing only 10.66.1.60 switch details and some other switches showing but it s not showing total network,I configured on cisco works snmp settings . any other configuration required.all switches are enabled cdp .Total Network 10.66.1.0 series.

Hi,
To restore the backup we need to follow this link commands:
http://cisco.biz/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/appc.html
restorebackup.pl
NMSROOT/bin/perl NMSROOT/bin/restorebackup.pl
[-d BackupDirectory] [-gen GenerationNumber] [-t TempDirectory] [-help]
Regards,
podhillo

Configure vpn 3030 snmp for cisco works 2000

vpn 3030 snmp error in cisco works 2000
I want to monitor vpn3030 through vpn monitor,so do some config on vpn3030:
1)Configuration | System | Management Protocols | SNMP
enabled port 161
2)Configuration | System | Management Protocols | SNMP Communities
public
3)Administration | Access Rights | Administrators | Modify Properties
snmp modify config
I can telent & http vpn3030,but when I run test in in cisco works 2000(server
configuration|diagnostics|connectivity tools|management station to device)
it said:
Interface Status Test Results
172.16.8.1 DOWN SNMPR failed
sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 91 protocol: snmp_get port: 161
SNMPW failed
sent: 0 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 0 protocol: snmp_set port: 161
about my vpn3030
Monitoring | System Status Thursday, 10 October 2002 16:40:16
VPN Concentrator Type: 3030
Bootcode Rev: Cisco Systems, Inc./VPN 3000 Concentrator Series Version 2.5.Rel Jun 21 2000
18:57:52
Software Rev: Cisco Systems, Inc./VPN 3000 Concentrator Series Version 3.0.2.Rel Apr 05 2001
20:50:58
Up For: 6d 0:04:27
Up Since: 10/04/2002 16:35:49
RAM Size: 128 MB
There is only a 6509 between cisco works 2000 server and vpn3030,and no restrictions on tcp/ip
flow.
Please help me .thanks in advance.

I test it in cw2000 cdone.
This is really a strange question.
the cw2000 server ip address is 10.8.1.122
the vpn3030 's ip address is 172.16.8.1
between them is a 6509, ip address is 10.8.1.201
when I test connectivity between cw2000 server and 6509, everything is good,snmp is ok.
when i test connectivity between cw2000 server and vpn3030, everything is good,except snmp is not response,while use third party snmp program,snmp status is ok!
when I change the cw2000 server's ip address to 172.16.8.3 and connect it directly to vpn3030,test connectivity between cw2000 server and vpn3030 ,everything is good,snmp is ok.

Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router

Hi All,
We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
Any help would be appriciated.
Thanks in advance
Samir

Hi,
*** Device Details for d0151-100 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
This is the error while doing syn archieve.
I am not sure about Rtr7000 version but we have latest Rtr7000.
Waiting for your kind reply.
Samir

After sharing itunes with MP3 rocket I get a pop up window telling me that my Apple Push is not working at present. Do I need apple push?Everything is working well for me with itunes and Rocket. Also what is Apple push.

I have been sharing itunes with MP3 rocket but I still purchase many songs and books from itunes normally.I have not had any trouble. Just recently a pop up window appears after I have been sharing and it tells me that my Apple Push is not working corectly and windows is looking for the problem. What is Apple Push and do I need it. as everything seems to be working well for me.Can you please advise me.

Has any had you try a reset yet? Sometimes the WiFi & Cellular anntennas get wacky.
Hold Sleep/Wak & Home buttons until the screen goes dark and you see the Apple logo

Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

Hi All,
Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
Any help would be greatly appreciated.
Thanks in advance.
Samir

Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.

Cisco Works tftp download config

I have a Cisco Works server that appears to be backing up config files from the routers. If I needed to restore a startup-config, how do I do it?
I tried "copy tftp start"
But I have no idea what it has named the file, where it is stored, it appears to be stored here:
E:\PROGRA~1\CSCOpx\files\rme\dcma
But I could be wrong about that, there is an extremely convoluted file directory scheme there that seems to have numbered the devices and has multiple backups of each with no common router name to see.
tells me:
%Error opening tftp://*.*.*.*/router-confg (Permission denied)
Probably have the wrong file name since I can not figure out what the file name is supposed to be or where it is.

Ok, figured it out:
%Program Files%\CSCOpx\tftpboot
TFTP server will allow you to download any file in the above directory.

Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7

Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7

I have the exact same problem you have? I can occasionally getpushnotification, but only once a day fore facebook. For twitter, I get nothing and newer got. Other programs never got any notification att all.Push notification is on both under notification center and the respective programs.I have iOS 5.0.1 on iPhone 4S.

Cisco Works NCM Driver for Cisco IPS/IDS

Hi,
Does anybody happen to know if there are drivers for the Cisco Works NCM that support Cisco IDS/IPS devices?
Thanks!!

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_book09186a00807a8a2a.html
your vendor is on crack
you can do any think you want .... but depends how many ports you have on the IPS
If you get an ips 4215 w/ 4 fastethernet ports you can do any combination

Cisco Works Access Levels

I was wondering if anyone could maybe point me to where it states that access levels cisco works needs. We have some core switches that we only want cisco works to store log and configuration settings, but not necessarily allow it to access to change these. Any ideas? or any documentation anyone can point me to?
Thanks
AJ

AJ,
So you want Ciscoworks to store syslog messages and device configurations? Not the settings?
For Ciscoworks to be able to retrieve and store the device configurations, the server will need at least SNMP ReadOnly-ReadWrite access to pull the configs from the devices via an snmp set using tftp. The only other way Ciscoworks can pull configs is through telnet or ssh where it needs access to the enable prompt to get the configs.
For Syslog, as long as RME can classify the type of Cisco device and knows what kind fo device it is syslog messages will be stored in RME.
Again, these answers apply to the clarification question I first stated.
Rob

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

How can i create work directory for Tomcat4 which is installed on Mandrake

Hello Everybody,
I installed Tomcat4 with the help of JPackage on Madrake Linux. It is working fine. But Unfortunatly my work folder in tomcat4 is deleted. I restarted my Tomcat, But the work folder not created. my application is not working. I need help from u people. Is there any other options to create work folder. I installed the tomcat4 from jpackage.
Thanks in advance, Naveen Kumar Madugula

4) Advanced Configuration - Multiple Tomcat 4 Instances
In many circumstances, it is desirable to have a single copy of a Tomcat 4
binary distribution shared among multiple users on the same server. To make
this possible, you must configure a CATALINA_BASE environment variable (in
addition to CATALINA_HOME as described above) that points to a directory
that is unique to your instance.
When you do this, Tomcat 4 will calculate all relative references for files in
the following directories based on the value for CATALINA_BASE instead of
CATALINA_HOME:
* conf - Server configuration files (including server.xml)
* logs - Log and output files
* shared - For classes and resources that must be shared across all web
applications
* webapps - Automatically loaded web applications
* work - Temporary working directories for web applications
* temp - Directory used by the JVM for temporary files (java.io.tmpdir)
If you do not set CATALINA_BASE to an explicit value, it will be initialized
to the same value as is set for CATALINA_HOME (which means that the same
directory is used for all relative path resolutions).
more -> http://jakarta.apache.org/tomcat/tomcat-4.1-doc/RUNNING.txt

Cisco Works - SNMP for Pushing instead of TFTP

Similar Messages

Maybe you are looking for