Cisco WS-C3560G error message after update IOS Ver.

I get this error:
*Mar  1 00:00:14.998: %HARDWARE-3-MCU_I2C_READ_ERROR: I2C read failed in MCU and
 attached devices (e.g. Temperature Sensor) can't be read.
*Mar  1 00:02:33.016: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, cha
nged state to downAuth Manager registration failed
*Mar  1 00:02:36.262: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for typ
e vlan
*Mar  1 00:02:59.323: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 12.2(58)SE2, RELE
ASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 21-Jul-11 01:44 by prod_rel_team .
Please, your Help .

The error means that we are not able to talk to the power controllers over
the I2C bus and therefore the powered devices connected to the switch may
not get power from the switch.
This indeed indicates a Hardware error and the switch may need to be
replaced.
I will also suggest you to upgrade the switch
to a more latest version while replacing because there are a lot of bugs
reported for the version you running. 
HTH

Similar Messages

  • HT4623 Error message after updating iOS 6:  Cannot connect to iTunes Store.  Any help would be appreciated!

    When I tap the App Store button or the iTunes button I get an error message:  Cannot connect to iTunes Store.  Can anyone please help? Please!

    I just updated the iOS6 and that is when I started having problems.  I get the message when I tap App Store and iTunes app. I get email messages but when I delete them they come back.  I open them up but does not connect to the internet properly.

  • Unable to send or receive text messages after updating iOS to 7.0.2

    I am unable to send or receive text messages aftering updating to iOS 7.02. I have an iPhone 4S. I have run all the suggested troubleshooting still can't text. I have been to my carrier, AT&T, there is no issue with my account. AT&T suggested resetting the phone to factory defaults (thereby wiping it clean). I am trying to avoid that as I had issues with transferring data & contacts before. Any one have a work around?

    Try this iMessage workaround
    Look for a fix by Apple by the end of the week.....

  • Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

    After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
    I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
    I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
    HELP!

    Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
    Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
    --Ryan

  • Window - No Disk error message after update to iTunes 7.1

    I updated to iTunes 7.1. After turning on iTunes for the first time after the download, I get a box that says "Updating iTunes Library". During this process, I get the dreaded error message: "Windows - No Disk" I clicked on it a few times and it went away. Then it came back and no amount of clicking would make it go away. At this point, iTunes no longer responds. I have gone thru this process now about 5 times.
    What is the fix?
    Does Apple answer this issue anywhere or is it left to its customers to speculate about this stuff?
    Thank you fellow consumers.
    David
    dell laptop   Windows XP  

    Do you mean like it says Windows-No Disk in Drive, please insert a disk? That type of message?
    Rachyl

  • App Store update button displays bug message after updating, iOS 6.0

    In iOS 6.0, after updating an app in the App Store, a weird message appears on the update button.
    The button remains active giving the choice to update twice or more.

    Dude there are many bugs in ios 6 it is not safe to use.

  • Error message after update while creatin equipment with BAPI

    Hi All,
    I'm creating equipment master record with BAPI 'BAPI_EQUI_CREATE'. After commit I receive the following error message in my inbox - 
    Update was terminated
    System ID....   ***
    Client.......   ***
    User.....   ***
    Transaction..   Z***
    Update key...   4AD49ADAF8E13020E10000000A701B19
    Generated....   15.10.2009, 16:44:33
    Completed....   15.10.2009, 16:44:33
    Error Info...   Error while determ. loc. crcy: exchange rate type date from to
    Who knows what's the reason and how can it be fixed.
    Thanks in advance,
    Kind Regards,
    Nikolai.
    Edited by: Nikolai Gurlenia on Oct 16, 2009 2:18 PM

    Hi ,
    Try to run the transaction and post the record manually and see how it behaves.
    Contact your functional consultant and check with them if they recently made some config changes
    Thanks
    Ramya

  • Error message after updating Nokia Browser.

    In my Nokia X2-02, after updating Nokia Browser, it gave me an error message: Conflicting applications, Show items?
    Please fix this bug, as I have tried resetting all settings and updating the software via PC.
    Any Idea?
    Solved!
    Go to Solution.

    This is a known problem which happens sometimes: there's a new versio of browser available, but  the application get corrupted during the download/installation of the app and stops working. Updating the device SW with Nokia Suite does not unfortunately fix the problem.. The only sure way to have the issue fixed would be to take the phone to a Nokia Care service point for refurbishing. http://www.nokia.com/global/support/locations/
    Another possible workaround for the problem is to use e.g. Opera Mini instead of Nokia Browser. (you can install it with Nokia Suite even though the Nokia Browser on your phone is now non-working). 
    I have tried to push Nokia to release a new SW update for most device models which would correct the issue without the need to refurbish the device at a Care Point, but the latest conclusion was that the problem does not occur frequently enough to create such fix... Except for a few very latest devices should be getting it in near future
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

  • Error message after updated 3GS iPhone to iOS5.0?

    I get an error message: iTunes could not connect the iPhone "iPhone" because the pairing record is missing? Anyone else run into this error when updating to 5.0?

    Same problem here. After the update, all my music was gone on my iphone. I have try to sync many time and nothing happen

  • Blank screen w/error message after updates

    Toshiba U305-s2812 laptop was performing fine, loaded updates and things went downhill. Decided to restore to a previous date. The restore function initiated as normal, seemed to take along time to restore files so I walked away. Upon returning screen was blank with message (0xc0000135 logon.scr- application err. failed to initalize). Everything seems to load, but screen goes blank when it should go to the logon screen. After it sits for approx. 20 mins....error message appears (0xc0000135 logon.scr- application err. failed to initalize). Also, performs the same if I attempt to boot to safemode. Pointer appears and responds to mouse movement, but there is nothing on screen to point to. Any suggestions?

    Satellite U305-S2812 
    0xc0000135 logon.scr- application err. failed to initalize
    Logon.scr is that funny small drifting picture that Vista starts out with. It's in the Windows\System32 folder.
    You can try going into the Recovery Environment and replacing the file. I can supply a copy of the file
    Can you reach the Advanced Boot Options menu? Turn the computer on and immediately press and hold the F8 key. On the Advanced Boot Options menu, choose Repair Your Computer.
    If you can't reach the RE this way, I can tell you how to get there another way, but you'd need to jump through some hoops.
    It would be easier all around to restore the hard disk to its original state using Toshiba recovery media.
    How would you like to proceed?
    -Jerry

  • HT201250 Time Machine + MyBook World Edition 2 Error message after update

    I purchase a 2TB MyBook World Edition 2 at my local Apple store to back up the computers on my home network.  After the latest update to Snow Leopard, Time Machine will no longer connect to the backup.  I get the following error message:  Connection Failed. The server "MyBookWorld.local" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.

    Never mind, I fixed the problem by removing a lock feature from my external drive.

  • Error message after update "Safari cannot open a browser window and may be

    My daughter just did an update and got the following error message: "Safari cannot open a browser window and may be missing important resources. Try installing Safari again.
    Any thoughts or tips as to what happened?

    Just a few pieces of clarifying information... This is Safari on OS X you're talking about, right? Also, what update did your daughter install? Have you tried reinstalling Safari (you can download it from Apple's site)?

  • -69 Error Message After Update

    Has anyone else gotten the -69 error message since they downloaded the most recent update? I can't get any of my new downloads (movies or music) to transfer from the computer to my IPOD. I'm very frustrated and would appreciate any help that you can provide.

    See if this trouble shooting article helps.
    iTunes displays error 69 when syncing iPod.

  • Error Message after updating Windows XP on the Microsoft Update site

    I have just taken delivery of a Satellite Pro A120 and updated the windows XP components on the Microsoft Update site, when the system rebooted to make the changes it developed an error message during the final stages of the bootup relating to the Realtek user.dll.
    Basically it said that the user32.dll had been written to memory because the location it was stored in was reserved for windows components. The file in question being c:windows\system32\hhctrl.ocx, this caused some components of the sound system to not work.
    It advises me to comtact realtek for a new dll? The latest drive on the Toshiba download site is older than the one installed. Any suggestion please.
    Thanks

    Please download the patch XP KB 935448 from the Microsoft support site.

  • Java.lang.error message after updating blackberry protect

    I took the update for Blackberry Protect today on my Blackberry Bold 9900 with OS 7.1.0.391 and now I get the java.lang.error message on re-boot. Anyone know what this is?
    I've tried uninstalling BB Protect and still get it, also tried re-installing it and message is still there.
    What is this error, how will it hinder-impact device and is there a way to fix it?
    Thanks in advance.

    Ok I figured this out
    1) alt lglg - this will show the entire event log
    2) click the blackberry key then select "options"
    what we want to do is basically see what application or applications in the event log is causing the error,
    In order to do that...
    3) Click the blackberry key again... Select "hide all types"
    Now we don't see anything in the event log, all the filters are unselected,
    Scroll down in the list till you find the "java exception" filter, click it... You will see a small menu , select "toggle filter"
    Now you will see exactly what application or applications is causing the java exception error :-)
    Mine was facebook, it could be anything you never know,
    Now.... Open up blackberry desktop , go to applications, remove the application or applications causing the error,
    Select Update
    Your device will now update then reboot, this might take over ten minutes, be patient
    This will work :-)

Maybe you are looking for

  • CUSTOS: COMO SE DÁ SEU CÁLCULO NO R/3?

    Amigos, Gostaria de saber como se dá o cálculo de custos de materiais no SAP R/3. Inclui-se os gastos operacionais ou não? E o custo direto e indireto o que usar pra esse tipo de cálculo de custo? Procurei na Biblioteca do Site mas, nada descobri, a

  • Heating, Longer Startup issues after upgrading to Windows 8.1

    It has just been about 1.5 years I have purchased this laptop and the way it is behaving now is killing me. There was absolutely no problem while I was running Windows 8(which was my preloaded OS). But after I upgraded to Windows 8.1 I am facing nume

  • Itunes 11 crash

    Itues crashes every time I open it. Process:         iTunes [3198] Path:            /Applications/iTunes.app/Contents/MacOS/iTunes Identifier:      com.apple.iTunes Version:         11.0 (11.0) Build Info:      iTunes-1100099063000000~1 Code Type:   

  • How to set values in ORA_JAVA.JARRAY

    Hi, I have a method inside a java class, which takes a two dimensional array as its argument. Now when I import this class file into Forms via Java Importer, my PL/SQL wrapper package has a procedure with ORA_JAVA.JARRAY type as its argument, which i

  • PreparedStatement.executeBatch() and BatchUpdateException

    Hi, I am using PreparedStatement's executeBatch() method to make batch operations, for such a scenario is there a way to continue the operation 3 and 4 when the operation 2 fails? operation 1 (will succeed alone) operation 2 (will fail alone) operati