Cisco WS-X4548-RJ45V+ module showing as unsupported in 4510R-E chassis with SUP 6-E

Hello All.
I am facing an issue with WS-X4548-RJ45V+ line card in 4510R-E chassis with the following specs
- two sup 6-E running sso redundancy
- ROM version 12.2(44r) SG
- IOS version 15.0(2)SG enterprise services K9
- Dual Power supplies , 4200VAC each
I checked the minimum software requirement for the module and found that it is 12.2(50). I feel the behavior really strange as I have the latest IOS and a compatible chassis. Please help me to sort this issue out as soon as possible.
Please find the below output
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model
---+-----+--------------------------------------+------------------+
1 48 10/100/1000BaseT Premium POE E Series WS-X4648-RJ45V+E
2 48 10/100/1000BaseT Premium POE E Series WS-X4648-RJ45V+E
3 48 10/100/1000BaseT Premium POE E Series WS-X4648-RJ45V+E
4 48 10/100/1000BaseT Premium POE E Series WS-X4648-RJ45V+E
5 6 Sup 6-E 10GE (X2), 1000BaseX (SFP) WS-X45-SUP6-E
6 6 Sup 6-E 10GE (X2), 1000BaseX (SFP) WS-X45-SUP6-E
7 48 10/100/1000BaseT Premium POE E Series WS-X4648-RJ45V+E
8 0 Unsupported module WS-X4548-RJ45V+
Thanks and Regards
Shabeeb

This is a futile attempt what you and/or your boss are trying to do. Let me explain:
1. The line card is identified as a WS-X4548-RJ45V+. It DOES NOT and WILL NOT say it is a "WS-X4548-RJ45V+E". You know why not? Because THERE IS NO SUCH MODEL as a "WS-X4548-RJ45V+E". The 45XX line card does NOT come in an "E" model. So you CANNOT install the line card into slots 8, 9 and 10 (because the line card is a CLASSIC line card).
2. Next, you CANNOT use a WS-X4548-RJ45V+ line card on a 4510R-E chassis. It is INCOMPATIBLE.
3. Let's say I'm wrong and you have an "E" model of a "WS-X4548-RJ45V+". You still will NOT be able to use it in your existing chassis. Why? Because current line card populations, where you have FIVE (5) 48-port line cards already, has hit the limit of your Sup6E/LE of 240-ports per chassis. As I've said in two previous responses (this will be the third response of the same thing), Sup6E/LE has a hard-coded limitation of 240 ports per chassis. And you've hit it. The Sup6E/LE was NEVER meant to "live" in a chassis larger than a 4507. And why NOT? Because there is a "hidden" documentation that the Sup6E/LE line card has a limit of 240-ports. This means that if you stick this line card into a fully-populated 4510 chassis, slots 8, 9 and 10 CANNOT be used, classic line card or not.
The "E" marking on the right-hand side of the line card means that the line card CAN BE supported in any "-E" or "+E" chassis. It's got nothing to do with the category of line card. The most important (technical) marking of this line card is the one on the left-hand side, the exact model number. This is what every network engineer wants to see. The right-hand marking is an addition meant to confused people.
Present the following options to your boss:
1. Do nothing; or
2. Upgrade your line card to Sup7/Sup8 and you can get slots 8, 9 and 10 functional (and increase the port count per chassis from 240 ports to 384 ports); or
3. Get another chassis.
I'm sorry to be brutally honest here. Someone will need to confess up to your boss the following items:
Someone has purchased the WRONG LINE CARD.
Your current supervisor card, Sup6E/LE, has a hard-set limit of 240 ports (deal with it & move on).
We can all debate on what is written on the card, the conflicting information/data found in Cisco documentation, the colour of the sky, or the sum of "1+1=21". At the end of the day, the simple facts won't change.
I encourage you to get a "second-opinion" by raising a Cisco TAC Case out of this thread.

Similar Messages

Since upgrading to Lion, video from 7D shows as unsupported video format

Video from my Canon 7D that used to work fine in Aperture now is showing as unsupported video format can anyone suggest a fix? Is this a Lion, Aperture, or Canon issue?

What's the format of your video? That will give you a hint as to what plugin is failing (or missing).
If you don't know, what's the URL of your site - it shouldn't take long for someone to work out the specifics.

Cisco's X2 10GE module and SDH STM64 (I-64.1) framing

Which Cisco's X2 10GE module is compatible with STM64 I-64.1 interface on transmission equipment?
It should be the X2-10GB-LR module, but Cisco's website does not say anything explicitly. For XFP modules, Cisco documentation state that they are compatible with STM-64 data rate.

Which Cisco's X2 10GE module is compatible with STM64 I-64.1 interface on transmission equipment?
It should be the X2-10GB-LR module, but Cisco's website does not say anything explicitly. For XFP modules, Cisco documentation state that they are compatible with STM-64 data rate.

Cisco MDS 9222i 10G Module DS-X9704 supports FCoE

Hi, Whether Cisco MDS 9222i 10G Module DS-X9704 supports FCoE? i saw IP over FC in the data sheet of this module but not FCoE?
Thanks
Abhilash

Also whether this 10 G interface can work as an Ethernet port and not just a FiberChannel port?

Which cisco command on router can show me specific hosts which have dhcp reserved IPs

how can i get that which hosts of the network have reserved dhcp IPs as i know that dhcp reservation to be created when mac address will be assigned.
so, which cisco command on router can show me specific hosts which have dhcp reserved IPs.thanks

As said by Leo, the DHCP bindings will show the corresponding MAC addresses.
Unless you have a list of all MAC addresses somewhere (which most people tend not to) then you can use the ARP cache combined with the CAM tables to trace which ports relate to which MAC address to get more information on the host if you need it.

ALV object in function module shows old data

Hello,
I create a function module with import parameter matnr.
This function module calls a screen that displays an ALV with the whole info of matnr out of table mara.
I include this in a program where a material can be selected. This is then input for the function module. Everything looks good for the first material. However when the function module is called for a second material I still see the ALV with the data of the previous material.
When I debug the code I see that new data is selected and put on the alv (with method set_table_for_first_display) but still I see the old ALV (which I free by the way in the exit of my function module...). It drives me crazy, what's the problem?
My function module:

FUNCTION ZJVB_TEST.
*"*"Lokale interface:
*" IMPORTING
*" REFERENCE(I_MATNR) TYPE MATNR
g_matnr = i_matnr.
call SCREEN 1979.
ENDFUNCTION.
TOP include:
FUNCTION-POOL ZJVB_TEST. "MESSAGE-ID ..
data: ok_code type sy-ucomm,
 container type ref to cl_gui_custom_container,
 alv type ref to cl_gui_alv_grid,
 g_matnr type matnr.
*& Module STATUS_1979 OUTPUT
* text
MODULE STATUS_1979 OUTPUT.
SET PF-STATUS 'FMAIN'.
* SET TITLEBAR 'xxx'.
if container is INITIAL.
 CREATE OBJECT CONTAINER
 EXPORTING
 CONTAINER_NAME = 'CONTAINER' .
 CREATE OBJECT ALV
 EXPORTING
 I_PARENT = container.
 data: itab type TABLE OF mara.
 select *
 from mara
 into TABLE itab
 where matnr = g_matnr.
 CALL METHOD ALV->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
 I_STRUCTURE_NAME = 'MARA'
 CHANGING
 IT_OUTTAB = itab.
endif.
ENDMODULE. " STATUS_1979 OUTPUT
*& Module USER_COMMAND_1979 INPUT
* text
MODULE USER_COMMAND_1979 INPUT.
case ok_code.
 when 'BACK'.
 free container.
 free alv.
 LEAVE to SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_1979 INPUT
My program:
*& Report ZJEROEN_ALV_FM
REPORT ZJEROEN_ALV_FM.
data: ok_code type sy-ucomm,
 l_matnr type matnr.
call SCREEN 1979.
*& Module STATUS_1979 OUTPUT
* text
MODULE STATUS_1979 OUTPUT.
SET PF-STATUS 'MAIN'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_1979 OUTPUT
*& Module USER_COMMAND_1979 INPUT
* text
MODULE USER_COMMAND_1979 INPUT.
case ok_code.
when 'BACK'.
 leave to screen 0.
when 'CALL'.
 CALL FUNCTION 'ZJVB_TEST'
 EXPORTING
 i_matnr = l_matnr.
endcase.
ENDMODULE. " USER_COMMAND_1979 INPUT
Thx for helping,
jeroen

Hello,
I found out that the container lifetime was the problem... When you create a container to put the ALV in the lifetime is set to default. Normally you never change this, I didn't mention it before I had the problem. But you have to change the lifetime to <your_instance_name>->lifetime_dynpro for instance my_container->lifetime_dynpro.
Also check this helplink: http://help.sap.com/saphelp_nw04/helpdata/en/9b/d080b79fc111d2bd68080009b4534c/frameset.htm

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

When I pre ordered my iphone 6 i was told I was going to get an additional 1 gig of data per month for a year. It even shows it on the receipt i received with the phone. When will I see that reflected on my account. I have had my new phone for a week a

When I pre ordered my iphone 6 i was told I was going to get an additional 1 gig of data per month for a year. It even shows it on the receipt i received with the phone. When will I see that reflected on my account. I have had my new phone for a week and used tons more data than usual and am hoping that will save me this month.

concretedonkey, I'm glad you were able to take advantage of this offer when you ordered your new iPhone 6. I can certainly review your account to ensure this was added for you. Please reply to the direct message I have sent you.
AndreaS_VZW
Follow us on Twitter @VZWSupport

Show the PO and Invoice Number along with Distribution Line Info

Does any one have some code that can show the PO and Invoice number along with the distribution line detail?
I'm tring to get to the po.po_vendors for segment1 and po.po_distributions_all but it screws up at the po.po_lines_all table which needs outer joins and it's just not working for me.

In case Invoice Distribution is matched to a Purchase Order then
ap_invoice_distributions_all.PO_DISTRIBUTION_ID and ap_invoice_distributions_all.DIST_CODE_COMBINATION_ID is the link to po_distributions_all table
Hope this help
Ashish

I set up my iCloud account on iPad with an exchange account and aol account. I can see exchange and aol emails but not those from .me account or apple email. I got it to show all 3 accounts on my iPhone with no problem. Hat am I missing?

I set up my iCloud account on iPad with an exchange account and aol account. I can see exchange and aol emails but not those from .me account or apple email. I got it to show all 3 accounts on my iPhone with no problem. Hat am I missing?

I'm having a similar problem, but I do have the key and is not working anyway.
My old pc was running on windows 7 and my new one is an apple running on Lion.
My phone is an Iphone IV and I can see all the bookmarks there.
In order to sync, what I did was click on the "I don't have the device with me", I entered the key that was provided and the process finish ok. It says congratulations, etc, etc.
But the bookmarks are not there, I tried merging data and replacing data on this computer options but is the same.
Any suggestions?

My ipod touch is stuck on a screen that shows a picture of the USB cable with an arrow to "itunes" and pic. of a CD with a music note over it....what do I do?

My ipod touch is stuck on a screen that show a picture of the USB cable with an arrow to a picture of a CD with a music note over it. I have reset and turned on and off.....what do I do??

Connect it to iTunes and restore it.
B-rock

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Some basic printer troubleshooting steps before worrying about a printer driver:
1. Have you tried turning the printer off and back on?
2A. Is the printer attached with a cable?
     If yes, have you tried unplugging and re-plugging both ends of the printer cable?
     If that does not help, can you test the printer with another cable?
2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
     Have you tried restarting your wireless router?
3. Have you tried restarting your MacBook? (Be sure to save your work first.)
4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
5. Have you updated OS X or the program you're trying to print from recently?

When I create a text message from my contact on my iphone 5, the contacts mobile number appears and not there name. But when they respond to my text, is shows up as a new text message with there name. How do I fix this?

When I create a text message from my contact on my iphone 5, the contacts mobile number appears and not there name. But when they respond to my text, is shows up as a new text message with there name. How do I fix this?

Double click the home button and swipe up the messages app to stop it, then open the app again. This pretty much completely stops the process and freshly opens it again, resolving problems at times. I have had this happen before as well on my iPad, I get a banner, check messages, and nothing new is there.
If that doesn't work, close the app like suggested above, but then restart the phone by holding down the home and lock button for 10-15 seconds until the apple logo appears.

What is the maximum number of PVC's supported by Cisco BPX 8620 and 8680 chassis with BCC-4V 128MB DRAM and 4 MB BRAM?

We are working on a capacity planning project for one of our customers and we need an estimate on the maximum number of PVCs supported in the following situations:
a)Cisco BPX 8620 and 8680 chassis with BCC-4V 128MB DRAM and 4 MB BRAM ?
b)Maximum number of PVC's supported by each of the following STM-1 cards:
- model BXM-155-4D and 4DX ?
- model BXM-155-8D and 8DX ?

a)It depends upon software level. b) 16,000 per card, With release 9.3:
60K Connections Support on BXM-E—Provides the ability to support a maximum of 60K per card for VSI applications for the BPX 8600, for example, PNNI or MPLS, used on enhanced BXM-E cards.

Imported PSD files showing up as images rather than sequences with layers

I am trying to import layered photoshop files (.PSD) into FCP 6, but they are not showing up in my browser as sequences with a video track dedicated to each layer, like the manual says they should. They show up instead as still images. It worked once on a previous project, but not any more and I haven't changed any FCP settings or Photoshop settings that I am aware of since then.
If any can tell me how to import them as layered sequences, I would greatly appreciate it!
Please note: I already confirmed the image mode is RGB colour and that the bit depth is 8 as someone suggested in a December 10th post to someone with a similar problem.
Rookie

Tom W, Meg the Dog & David H,
David H - No, they wouldn't open as sequences when I double clicked them.
Meg the Dog - I confirmed the settings you suggested and noticed that a few of the images I wanted to import were over that 4000 pixel width restriction you mentioned, however, without resampling them, I was able to import them...but only after Tom W's suggestion...
Tom - I'm glad you raised the point about photos edited in Photoshop on a PC versus a Mac. My photos were in fact edited on my PC, and it wasn't until I opened them and re-saved them on my Mac, that I was able to import them as a sequence into FCP. Thank you so much for pointing this out!
Problem solved! Thank you so much Tom W, Meg the Dog and David H!
Rookie / Shaun M

Cisco WS-X4548-RJ45V+ module showing as unsupported in 4510R-E chassis with SUP 6-E

Similar Messages

Maybe you are looking for