Cisco WVC210 WLAN Camera - multicasting question

Hello,
it act's about the CISCO WC210 WLAN Camera, I would be really happy, if somebody could help us to eliminate our problem
Informatiom
We are using the WVC210 WLAN-Cameras (http://ww:w.cisco.com/en/US/products/ps9948/), this camera has a web server, so is accessible over a normal web-browser, to see the video transmission.
We just set it up with a normal WLAN-Router, so the camera is connected wireless to the router, and this router is connected to the internet (WAN).
With the cisco video-software or the web-interface, it's now possible to stream the video.
Our questions:
Now we like to stream the Video on our Website, so people what visit our site can take a look at our company and so on.
We are able to stream the Video with the MJEPG-Format, like the camera web-interfaces offers...
The problem is, with normal ip-transfer method, each user would connect directly to the camera and increases the data-transfer, the internet-connection will than overload easily.
But the camera supports multi-casting, so the camera only transmit one data stream and all clients connected to this stream will receive the packages.
Our problem is, we do not have any knowledge about multi-casting and how it works, the camera has a normal ip-address and a pre-configured multicast address with group name, so how can we connect a client to this multicast group, without increasing the data-transfer with each new user?
Would you recommend us to use the multicast function of this camera or put a server between the camera and the website?
Could you give as advice or some kind of tutorial, how we can set up this multicast service and easily get a player for the stream on our website, without using many plug ins or special apps ?
Looking forward for your help, thank you all
Regards
Markus
P.s.: You can also reply in german

Hi, your general understanding of multicast is correct, but I don't think there is any multicast in general use on the Internet today. In the mid 1990's there was a thing called MBONE that experimented with this idea for basically the same application as you describe- to multicast video. Check Google or wikipedia for some history of MBONE in case you are interested. That said, you should be able to use the multicast ability on your own LAN/WAN environment if that helps you at all.
I think the way people stream video to many users via the Internet today is essentially by having a lot of bandwidth and CPU. You could probably find places to host your video and 'rebroadcast' it via their servers and Internet bandwidth. Take a look a qik.com for an example of something that might help you. There must be other services similar to qik that can 'rebroadcast' video streams that you only send one stream to them and they let multiple users see it. I would expect to pay something for this service, but you might find free, ad supported services.
Good luck and let us know what you end up doing.
brandon

Similar Messages

Linksys Cisco WVC210 Network Camera - Problem

Hello Cisco Members,
I have problem with one Linksys Cisco WVC210 Network Camera.
When I Power ON, the PowerLED blinking, other 3 GreenLED light and on LCD Display have nothing.
I make 30 seconds push resset button, 30 seconds power OFF and havent result. When I connect it to
Router with DHCP, this camera can not take IP Address... I do not understand where is a problem with
this camera.
I write here to get a fix of this problem.
Regards,
Vivendi

Try power on and after 90 seconds go to the Browser and type in 192.168.1.99 (assuming you are on the 192.168.1.xx LAN network) and see if you are able to get to the firmware page, if yes try reload the firmware, if you are not then I would recommend returning the product by getting in touch with Cisco's Tech Support and get an RMA number and instructions on returning the product and get a replacement.
Alan.

Power supply of Cisco WVC210 Camera with batteries

I want to use my new WVC210 Wireless-G PTZ Internet Video Camera on my wheeled robot, so I would like to provide a separate power source for this camera.
Can I use 4 "D" batteries for it? They give 6 V DC, not 5 V as written on the camera.
I've measured the voltage coming out from the power supply, which came with the camera. In Switzerland it outputs 5.39 V DC.
I am afraid 6 V DC may damage the camera. Or is it OK?
If 6 V is not OK, then another possibility is 4 x 1.2 V DC researchable batteries. But it gives only 4.8 V DC.
Can camera be supplied with only 4.8 V DC? Or is it better to use 6 V DC?
Or I shall build DC-DC converter outputting exactly 5 V?
In specifications for the Cisco WVC210 it is written: "5V DC 2.0A switching power supply". But how tolerrant is the switching power supply? Will it work safely with 6 - 5.8 V?

I'm afraid we can't recommend using any power source other than the AC adapter included with the camera. Using anything else would likely void your warranty also.
Regards,

Parsing raw DAT files from WVC210 IP cam

Hi,
Is there any information available about the raw DAT file format that cisco uses for the WvC210 IP camera's?
A surveillence system based on 2 WvC210 IP camera's was vandalised and we could salvage only the DAT files, the rest is trashed.
I've loaded the software onto a new system and put the DAT files in the correct location but nothing works on these files.
I can see structure in the raw data, so there is something there.
The validate tools and the DBTools don't have any effect so maybe the files are mangled.
But as a programmer I could parse the files and possibly pad stuff to get it working again.
It's really important we do a full effort to retrieve some evidence, any help is appreciated.
I've read most posts and I relalise the product is EOL, but all I need is the file structure, any tech docs available?
Regards,
Shaun

Hi Alan,
We have more .DAT files but no .rcd or other files.
Here is the full file list, showing bytes and filenames.
These are all the files that were recovered from the vandalised harddrive.
But I'll double check this just to be sure.
I'm guessing the naming convention is:
C00000/1 (camera number)
S00A ??
20120215 (year-month-day)
151302 (hr-min-sec)
37178 (??)
.dat (file extention)
15-02-2012 16:02           717.034 C00000S00A20120215130237178.dat
15-02-2012 16:40           819.238 C00000S00A20120215134037698.dat
15-02-2012 18:03           718.943 C00000S00A20120215150349680.dat
15-02-2012 19:06           935.351 C00000S00A20120215160626831.dat
15-02-2012 19:08           323.334 C00000S00A20120215160844811.dat
15-02-2012 14:37           971.580 C00001S00A20120215113659726.dat
15-02-2012 15:09           752.687 C00001S00A20120215120925565.dat
15-02-2012 16:00           563.281 C00001S00A20120215130006543.dat
15-02-2012 17:34           615.714 C00001S00A20120215143439943.dat
15-02-2012 17:34        22.921.555 C00001S00A20120215143441035.dat
15-02-2012 19:08           858.214 C00001S00A20120215160839377.dat
15-02-2012 19:13       132.448.256 C00001S00A20120215161340485.dat
15-02-2012 19:19       350.180.000 C00001S00A20120215161947209.dat
These are all the files we have and I've uploaded all to the google docs folder:
https://docs.google.com/open?id=0B8oCN_ZRP1rARTBFWW4tNHhRUEdxTmM0SV9SSTVsQQ

Cisco devices that support Multicast traffic?

Folks,
I am looking for list of Cisco devices that support Multicast traffic. Does anyone know how to get this information?
Thanks,
Nagesh

Cisco Feature Navigator

CGI Documentation for the WVC210 PTZ camera

Hi everybody,
I would like to get the OFFICIAL AND COMPLETE LIST OF CGI COMMANDS that can be used to control the Linksys WVC210 PTZ camera.
I could only find a partial (and possibly non-official) list of CGI commands for this camera at:
http://www.myhomeserver.com/?page_id=80
For documentation on how to control cameras made by AXIS, Trendnet, Intellinet and Genius see:
http://pablohoffman.com/cgi-bin/twiki/bin/view/Main/NetworkCameras
The following link can also be useful for developers of IP camera software:
Code Project: Camera Vision
http://www.codeproject.com/KB/audio-video/cameraviewer.aspx?fid=339699&df=90&mpp=25&noise=3&sort=Position&view=Quick&fr=51&select=2769826
That's all for now. Thanks for any help.
CLNJ

Hi,
Can you point me to these third party web sites? I could only find one site and the info there seems to be incomplete: http://www.myhomeserver.com/?page_id=80
I am aware that the LINKSYS makes the GPL code for the camera (firmware) availabe at their site.
However, it is very hard to me to understand why I should look through their code and try to find (or guess) the CGI commands that one could use to control the camera, a task that seems very cumbersome to me. Am I the only one that thinks this way?
Fortunately, there are manufacturers of similar products (in the same price range) that release documentation for advanced users and developers, that is, for those people whose needs are not satisfied by the packaged software that comes with the product and know how to go further. These manufacturers know that not everybody is a dumb happy user. I guess I am forced to give their products a good look.
Thanks,
CLNJ

Hotspot printer for Cisco Unified WLAN infra?

Hi!
I like to know is there in market hotspot printers which works with Cisco Unified WLAN infra (WLC+NAC Guest Server, ACS, ISE)?
For example Zyxel have this kind printer which can generate subscriber accounts and print account information with the push of button.
This SP-200E printer works with ZyXEL Hotspot Gateway G4100v2.
http://www.zyxel.ch/files/manuals/G-4100_v2_2_SP-200E.pdf
Br Juha

You can use TACACS also , For further details kindly follow the url'
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml

WVC210 Wireless-G PTZ Internet Camera Audio question

I cannot get the Audio OUTGOING to work so that someone can hear me while I am viewing them on the camera.
Is there some trouble shooting that I can do or is there a known problem?
I have made all the necessary adjustments in the setup of the camera and it still does not work... I own 4 of them.
thank you

Hello Mr Autieri, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
There are a couple of places to check in the camera when you have speaker issues. One is like you mentioned, under audio settings and checking the duplex settings. Also check on the main screen, there is a button that is sometimes defaulted to off. It is only visible when the audio is enabled. Once you enable it here then you should get a volume slide to adjust volume as well.
If this doesn't solve your issue, please call in and let one of our answering agents help troubleshoot this further.
Thanks
Eric Moyers
Cisco Network Support Engineer
CCNA, CCNA-Wireless
1-866-606-1866

Cisco 2500 IP Camera

Just a quick question? Does the 2500 IP camera support multicast? Or is it unicast only?

The data sheet specifies it support IP multicast
http://www.product-catalog.com/cisco/2500.pdf

Cisco Video Surveillance Manager Software question

Hi,
We have installed Cisco Video Surveillance Manager and configured it for basic function. My question is quite simple but i had problems to understand how to install the cisco software in order to monitor the IP cam network. Can anyone provide some basic guidelines about how to install the monitoring software? Also Windows Explorer9 has problems for windows 7 is there a solution about the web monitoring?
Thank you in advance

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
The software that you are asking about is an Enterprise software. Please try asking your question in this group.
https://supportforums.cisco.com/community/netpro/security/physical-security
Thanks
Eric Moyers
Cisco Network Support Engineer
SBSC Wireless and Surveillance SME
CCNA, CCNA-Wireless
1-866-606-1866

Cisco PrecisionHD 720p Camera with C60 codec - Firmware?

I can't find any documents regarding firmware availability or updates for this camera model.
It's connected to a C60 TC7.2.0 and in the Peripherals page, the camera model is Cisco PrecisionHD 720p
and the software ID is S01692-3.0Final [ID:30038] 2009-08-27
The problem is that the camera does not respond to the IR of the remote control. (PTZ)
Is there a firmware update or DIP switch setting or something needed to use this camera with this codec?

Yes, that's correct about the 720P cameras not upgrading from the C series codec.
If you want to upgrade them, the best way to do it is to connect them to one of the older MXP devices (ie, and Edge 95 MXP).
The firmware you posted is the latest that is available: S01692-3.0Final [ID:30038] 2009-08-27.
Dumb question: Do you have the camera control cable connected? And are you using the correct camera control cable - from memory, there are two, a "C3000" and a "C6000" cable - only the C6000 cable will work when connecting the 720 Camera to the C series codec. The C3000 cable is used on the Edge 95.
The other problem could be that you don't have the IR turned on on your endpoint:
xconf // ir
*c xConfiguration Cameras Camera 1 IrSensor: On
*c xConfiguration Cameras Camera 2 IrSensor: On
*c xConfiguration Cameras Camera 3 IrSensor: On
*c xConfiguration Cameras Camera 4 IrSensor: On
*c xConfiguration Cameras Camera 5 IrSensor: On
*c xConfiguration Cameras Camera 6 IrSensor: On
*c xConfiguration Cameras Camera 7 IrSensor: On
*c xConfiguration SystemUnit IrSensor: Auto
** end
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Ascom Wifi IP Phones with Cisco 4400 WLAN Controllers

hi,
i have 2 4400 WLAN Controllers in same Network , but Ascom IP Phones which is associated to theses defferent Controllers can reach via Network and can ring the phones but not able here the voice while they are associated to deffrent WLCs. There is no issues if both Phones are assoicated to same WLC.
any body can suggest me what will be the problem with this????
thanks,
Anvar

sir,
both codes are 7.0.166.0
and both are in the same mobility group
plase find below output of show wlan command
Controller-1
(Cisco Controller) >show wlan 3
WLAN Identifier.................................. 3
Profile Name..................................... Voice-Vlan-Ground Floor
Network Name (SSID).............................. Minhalvoice
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Disabled
AAA Policy Override.............................. Disabled
Network Admission Control
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Number of Active Clients......................... 4
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
CHD per WLAN..................................... Disabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ voicevlan-gr
Multicast Interface.............................. Not Configured
--More-- or (q)uit
WLAN ACL......................................... unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Platinum (voice)
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... 802.11g only
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
   Authentication................................ Global Servers
--More-- or (q)uit
   Accounting.................................... Global Servers
   Dynamic Interface............................. Disabled
Local EAP Authentication......................... Disabled
Security
   802.11 Authentication:........................ Open System
   Static WEP Keys............................... Disabled
   802.1X........................................ Disabled
   Wi-Fi Protected Access (WPA/WPA2)............. Disabled
   CKIP ......................................... Disabled
   Web Based Authentication...................... Disabled
   Web-Passthrough............................... Disabled
   Conditional Web Redirect...................... Disabled
   Splash-Page Web Redirect...................... Disabled
   Auto Anchor................................... Disabled
   H-REAP Local Switching........................ Disabled
   H-REAP Local Authentication................... Disabled
   H-REAP Learn IP Address....................... Enabled
   Client MFP.................................... Optional but inactive (WPA2 not configured)
   Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
--More-- or (q)uit
SIP CAC Fail Send Dis-Association Policy......... Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Mobility Anchor List
WLAN ID     IP Address            Status
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Controller-2
(Cisco Controller) >show wlan 3
WLAN Identifier.................................. 3
Profile Name..................................... Voice-Vlan-Ground Floor
Network Name (SSID).............................. Minhalvoice
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Disabled
AAA Policy Override.............................. Disabled
Network Admission Control
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Number of Active Clients......................... 15
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
CHD per WLAN..................................... Disabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ voicevlan-gr
Multicast Interface.............................. Not Configured
--More-- or (q)uit
WLAN ACL......................................... unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Platinum (voice)
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... 802.11g only
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
   Authentication................................ Global Servers
   Accounting.................................... Global Servers
--More-- or (q)uit
   Dynamic Interface............................. Disabled
Local EAP Authentication......................... Disabled
Security
   802.11 Authentication:........................ Open System
   Static WEP Keys............................... Disabled
   802.1X........................................ Disabled
   Wi-Fi Protected Access (WPA/WPA2)............. Disabled
   CKIP ......................................... Disabled
   IP Security................................... Disabled
   IP Security Passthru.......................... Disabled
   Web Based Authentication...................... Disabled
   Web-Passthrough............................... Disabled
   Conditional Web Redirect...................... Disabled
   Splash-Page Web Redirect...................... Disabled
   Auto Anchor................................... Disabled
   H-REAP Local Switching........................ Disabled
   H-REAP Local Authentication................... Disabled
   H-REAP Learn IP Address....................... Enabled
   Client MFP.................................... Optional but inactive (WPA2 not configured)
   Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
--More-- or (q)uit
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Mobility Anchor List
WLAN ID     IP Address            Status
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Transfer HD video from canon dslr to iPad 2 via cam kit Question!

Hey all.
I have a Canon DSLR that records 1080p HD video at 24, 25 & 30 fps and 720p HD video at 50 & 60 fps.
I have an iPad first generation with a ipad cam kit for transferring video and photos. It transfers photos just fine, but with video, it can't transfer full 1080p clips at all directly from the camera using the USB cam kit connector or via SD card using that adaptor. Nor will it transfer 720p clips using the cam kit unless the clips are not more than 30 fps. Since the canon t3i dslr shoots 720p video at 60 fps, the video is not viewable unless I first transfer it thru my iMac at home and THEN load it on the iPad.
Since I travel a lot, this is not convenient for me.
I want to be able to transfer my HD movies directly onto my iPad while on the road and edit them and then upload them to my travel blog or YouTube.
The first gen iPad cannot run the new iMovie app. Only the new iPad 2 can. So I was thinking of upgrading to the iPad 2.....
HOWEVER...I want to know if I will have the same problem trying to transfer my HD video directly from my canon t3i DSLR via the cam kit while on the road so that I can view and edit the clips on my iPad 2?
I know getting the MacBook air is an option, but I prefer traveling with the iPad. I just want to know if any video/photographers who have the new iPad 2 and canon dslr can answer my questions.
Thanks so much.
Cheers.

Yes, they will transfer as long as they are in 720p. However, you might want to check this if you are willing to try. Might save you from having to buy a new iPad?
http://mikehellers.com/blog/2010/05/09/import-and-view-1080p-videos-on-the-ipad- directly-from-your-canon-dslr/

Camera Connection questions...

I have a couple questions about the iPad Camera Connection that I have not been able to find answers for on the forum:
1. Does the Photo app recognise already imported images if you leave images on your camera after importing and want to import newly shot ones? or does it import them all again?
2. I use a Canon 5D Mk2 - I've read that the iPad cannot play the movies, however does it still import them from the camera and then allow you to transfer them to your laptop later?
thanks!

For your first question, the answer is no. It will ask if you want to import an old (already imported) image just like it asks for a new image. At least that is how it works with my ipad.

Cisco LWAP & WLAN Controller Flexconnect Across HP Switches

Hello All, I'm looking for a little guidance in making the needed routing and switching configuration changes on our Corporate Network to accomadate flex connect functionality for Cisco Lightweight Access Points (LWAPs). The LWAPs that are currently configured on our network only work when our WLAN Controller is up and running and I need for them to be disconnectable so that we can move the WLAN Controller to our virtual co-lo. It should be known that I inhereted this network from the previous admin and have been working hard to map everything out to the best of my ability. Also, the WLAN controller is already operating in our production network so it limits my ability to do much testing.
Just FYI, I'm a new Systems Admin promoted from a Desktop Support role and have my CCENT (Currently working on CCNA & MCITP Server Admin) so I have some knowledge but it is limited on the networking and switching side of things. Unfortunately, the Senior Systems Admin has even less knowledge of networking than me and I don't really have anyone to turn to which is why I'm posting here. I would have utilized GNS to help me simulate the configuration however there are HP switches in the mix and no means of emulating them.
-Relevant Device List-
(CONSA251) Sonicwall NSA 240 - 10.1.1.251
Interface Information
Interface    IP Address    Description
X0 -> LAN
10.1.1.251   LAN Interface
X1 -> WAN
*************   Time Warner WAN
X2 -> DMZ
*************   DMZ Interface
X3 -> WAN
*************   Sprint WAN
X0-V20 -> LAN
10.1.101.1   Corporate WLAN
X0-V30 -> LAN
192.168.1.1   Guest WLAN
(CORT250) Cisco 3845 - 10.1.1.250
(CO-WLAN-CTRLER) Cisco 5508 Wireless Controller - 10.1.1.2
(COSW240) HP Procurve 4108GL - 10.1.1.240
(COSW238) HP Procurve 2510B-24 - 10.1.20.238
(CORP-AP-MIS) AIR-LAP1131AG-A-K9 - 10.1.1.79
(COSW239) HP1810G-24 - No IP (Inaccesible but being replaced)
I will now go on to explain our network topology as it pertains to the WAPs and WLAN Controller and how I believe it needs to be configured in order to operate from my perspective.
Our Corporate and Guest Wireless Access is provided via the Sonicwall CONSA251 through a connection from the X0 interface to HP Switch COSW239 which is then connected to WLAN Controller CO-WLAN-CTRLER as detailed below:
Device - Interface Name/Port
CONSA251 - X0
COSW239 - 2
COSW239 - 18,19
CO-WLAN-CTRLER - 2,3
The WLAN Controller currently communicates with all the LWAPs via Layer 3 TCP\IP as I understand it and then routes all DHCP requests and traffic destine for the 10.1.101.1 (corporate WLAN) and 192.168.1.1 (Guest WLAN) to the Sonicwall and vice versa.
Now what I am trying to do is VLAN the LWAP CORP-AP-MIS across the HP Switches to the X0 interface on the Sonicwall NSA240 where it will be able to route traffic via VLAN 20 & 30. The problem lies in my inexperience with HP VLAN configurations and how the ports need to be configured on each device so it can route traffic to the Sonicwall when the WLAN Controller is shutdown.
The LWAP CORP-AP-MIS layer 2 trace to the WLAN Controller is as shown below:
Device - Interface Name/Port
CORP-AP-MIS - FA/0
COSW238     - 16
COSW238     - 25
COSW240     - B4
COSW240     - H6
CORT250     - GigabitEthernet0/0
CORT250     - Se1/0
CONSA251    - X0
Now for all intesive purposes the Corporate Router CORT250 should probably be handling the routing for our Corporate and Guest Wireless network however that was not the way it was originally setup and I have to work with what was inhereted. The Corporate Router CORT250 has a default route to the Sonicwall and the Sonicwall CONSA251 has all the routing already in place for the Corporate & Guest WLANs.
What I would like to do is VLAN off the X0-V20&V30 accross multiple switches and switchports to each LWAP in our building. I do have the LWAP I'm testing on configured with Flex Connect which I understand is required for it to be disconnectable.
Any guidance on how I would go about configuring this accross devices would be appreciated. I know there are some difference between HP and Cisco Switching terms and how tagging, untagging, and trunking works however I lack the experience to apply this in practice especially in a production environment.
I will be happy to provide any additional information or clarification that is needed. Thank you in advance for the help.

Just to add about the ISE... you can profile, but having only one ssid might or might not work in your situation. Also if you end up with remote sites or ap's in h-reap mode, currently ISE cant do any profiling. If you go with the 7500 or 5508/WiSM2, they don't really do an active-active or active backup. They are both up and you can split the load or put all ap's on one, its up to you. I usually split the load just to make sure both are working. I don't want to all of a sudden loose the primary and then find out my secondary/backup is not working.

Cisco WVC210 WLAN Camera - multicasting question

Similar Messages

Maybe you are looking for