CISCO7606 as pppoe server

Hi, I have a router 7606 and i did PPPoE server, but i have a same problem.
Some client connect via pppoe but have bandwith no more 60kbit/sec.
I tried to change IOS but it doesn't help.
this is config:
interface Virtual-Template1
ip unnumbered GigabitEthernet0/1
peer default ip address dhcp-pool PPPoEpool
ppp max-bad-auth 3
ppp authentication chap
ppp timeout retry 3
ppp timeout authentication 45
ppp timeout idle 3600
ip dhcp pool PPPoEpool
   network 79.98.x.x 255.255.255.0
   default-router 79.98.x.x
   dns-server 217.78.x.x
interface GigabitEthernet2/2
ip address 79.98.X.X 255.255.255.224
speed 1000
no cdp enable
interface GigabitEthernet2/2.2254 access
encapsulation dot1Q 2254
pppoe enable group severnet
ip subscriber interface
bba-group pppoe severnet
virtual-template 1
sessions per-mac limit 1000
sessions per-vlan limit 1000
sessions auto cleanup
thanks

Hello Timur,
Wich IOS did you use ?

Similar Messages

I am constantly receiving an error message that says "Could not find a PPPoE Server." My wireless internet connection seems to working fine, I'm not having any issues. How do I get rid of this error message?

A few weeks ago my computer had lost the connection to the wireless internet. I set it up again and was able to connect to the internet, however since then I've been receiving an error message "Could not find a PPPoE Server." I went back into Preferences and unchecked the PPPoE server option but the error message still pops up.
Any idea how to fix it?

In the Network pane of System Prefences, do you have duplicate services on the left column? When you "set it up again", you might have duplicated a service and both (the good working one and the previous that lost connection) might be trying to connect at the same time.

Could not find a PPPoE server problem.

I have been running my G4 plugged into a netgear ethernet hub for quite some time to get online. I also have a wireless router connected to it on which I run my windows laptops. I never had a problem having them all online at one time. I didn't use my G4 for a few weeks, when I turned it back on and tried to get online, I got the "could not find a PPPoE server" message. If I unplug the ethernet cable from the hub and plug it directly to the DSL modem, it connects with no problem, plug it back into the hub and it won't connect. I swapped the hub for a Linksys 5 port ethernet 10/100 switch. Same thing happens and I get the same message, but it will not get online if any of the PCs are online, if I shut the PCs down then the mac gets online, but if I have the mac online then the PCs will not connect. I have been on the phone with the drones from earthlink and they have been useless. If you tell them that you are running any kind of routing device the will not help you at all. I am at a loss as to how to get around this, like I said, it was all working fine before. I am not sure if the problem is at my end or if earthlink did something at their end. Any help would be greatly appreciated.
G4 Mac OS X (10.4.7) dual 533 MHz
G4 Mac OS X (10.4.7)

Do you need to "spoof" the MAC address of the router or hub? some ISPs actually read and register the hardware MAC address of the first two devices downlinked. Modem and router, modem and G4, etc.
I stopped using a hub once switches got inexpensive and routers came with switch capability. Now have an all in one modem + router/switch which simplifies setup, wires, and only one device to worry about (but have backup modem and router etc from before in case anything should happen).
Possible that something happened. Or that your router needs to be reset. Or that a storm did something while you were gone, though you seem to have swapped devices enough to rule that part out. Or a bad cat5 cable that a mouse or cat gnawed on.
My guess is set the Linksys to the same MAC address of the hub you were using or call Earthlink again (hard I know) and have them re-authenticate the new router's MAC address.
Do you have a surge protector in front of your modem? and again an RJ45 filter before it goes out to your router or G4? I put all my equipment on APC UPS and going through surge and line protection to protect ethernet ports and equipment.

Could not find a PPPoE server.

Broadband connects and runs fine but I keep getting a window pop up with "Internet Connect. Could not find a PPPoE server." I keep closing it!
Mini Mac OS X (10.4.2)

Hi Roger,
Your profile doesn't say where you are but it's probable that you shouldn't be trying to connect over PPPoE.
Have a look at my advice in This Thread and see if that does the trick.
Best of luck,
Adrian
ibook G4 1GHz, 768mb; iMac 17" G4:768mb (10.3.9) Mac OS X (10.4.6) Belkin WiFi F5D7632

Error message pops up saying "Network Connection could not find a PPPoe Server.

I am trying to update my wife's iBook, 2,1 for my mom to use. It is running OS 10.6.8. Every time I wake up the computer an error message pops up saying "Network Connection could not find a PPPoe Server." It does it periodically when the computer is on. It will drive my mom nuts and worry her. Can anyone help me stop this from happening?
Thanks,
KC

Hello kevinfromwauwatosa,
Thanks for the question. The following article provides the most relevant information to your issue:
Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
http://support.apple.com/kb/TS1843
For additional information see this resource:
Mac OS X: Troubleshooting a PPPoE Internet Connection
http://support.apple.com/kb/TS1871
Thanks,
Matt M.

No internet, "PPPoE Server Not Found" message. Same problem with both old and new modems.

Help please!
My internet connection with my old Westell 6100 modem was working fine, then quit all of the sudden and would not restart. The DSL and Data lights on the Westell modem were both green. The Internet light alternated between red and off.
I tried every troubleshooting thing I could think of:
Powering down and re-starting the modem and computer.
Resetting the modem.
Checking all of the wire and jack connections.
I plugged my computer ethernet cable straight into the modem, bypassing my router.
I tried both Windows and Mac computers.
I plugged the modem directly into the network interface on the outside of my house to bypass all of my house wiring.
I checked all my phone jacks with a telephone tester to make sure both phone lines were working and not reverse-wired.
I made sure I did not have a DSL filter installed on the modem line.
Verizon Tech Support did a line test and told me the line was fine but that there might be a problem with either my modem or something at the "central office" (not sure what that means). Verizon also sent me a new router as well -- a D-Link DSL-2750B.
The new D-Link router also does not connect to the internet (same problem). The DSL, Data, and Internet lights are all green on the D-Link. I have the computer directly connected to the modem with a new ethernet cable. I repeated the above troubleshooting steps. I went into the router configuration 192.168.1.1 and ran the modem's "Internet Troubleshooting" tests.
There were two error messages on the router configuration screens:
1."PPPoE Server not found" error message is shown on the summary screen.
2."No internet infrastructure present. Please call your infrastructure provider." is shown in the "internet troubleshooting" test results.
Verizon had me change some settings inside the router configuration -- no dice. Verizon ran another line test. A "Level 2 Tech" took over the call and told me that he thinks that the cause of the problem is that the outside wiring coming to my house is reverse-wired. How can this be true since my DSL worked for 2 years before this, my phone line tester indicates my phone lines are wired the right way, and my router reports "PPPoE Server Not Found?"
Verizon is sending out a repair tech to check the outside wiring but I don't think that is the problem at all.
HELP!
Solved!
Go to Solution.

If you're getting DSL sync (solid DSL light), this sounds like a case of a bad line card to me. I've seen it happen before where it wasn't an account or route issue to the network.
========
The first to bring me 1Gbps Fiber for $30/m wins!

How do I get my Powerbook G4 to stop looking for a PPPoE server?

I was given an old PowerBook G4 and while I am using it, a message keeps popping up. The message says, "Internet Connect. Could not find a PPPoE server." I don't know how to get this to stop. Please help me. Thanks.

 > System Preferences > Network > PPPoE tab:
De-select "Connect using PPPoE".
Apply Now.
Close System Preferences.

Pppoe server with Solaris 10

Hi
I looking for a free pppoe server with radius support (for wireless auth) for Solaris 10.
I know rp-pppoe from Roaring Penguin but it not support hundreds of users..
Somebody knows another software (better free or cheap)
Thanka in advance.
roberto

I found that Solaris 10 have build in pppoe server support.
http://docs.sun.com/app/docs/doc/816-4555/6maoquijn?a=view
How may users can I have online at same time ?
The pppoe Solaris 10 server have radius support built in ?
roberto

Error message keeps popping up "Network Connection could not find PPPoe Server"

I am trying to update my wife's iBook, 2,1 for my mom to use. It is running OS 10.6.8. Every time I wake up the computer an error message pops up saying "Network Connection could not find a PPPoe Server." It does it periodically when the computer is on. It will drive my mom nuts and worry her. Can anyone help me stop this from happening?
Thanks,
KC

Help is right here, front and center caibadass. May I ask what's the reason for the mobile number change? Are you logged into My Verizon as the account owner to make such a change? If you can share the details then we can assist. Keep in mind that if the number is changed online then there is not a cost.
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport

Could not find PPPoe server

I connect to internet wireless and have no problems except I continue to get a popup saying "could not find PPPoe server". I just say ok but it continues to come up every so often. How can I stop it from continually coming up? This just started recently but I can't think of anything I have done that would cause it.

I am getting this same message. When I have the computer on a Could Not Connect To PPPOE Server box keeps coming up every few minutes or so, even if I don't have a web browser launched. I have cable internet through Time Warner Cable. I am using a dual-core Intel Mac Pro with Mac Os 10.5.8. I've had this set up for about two years and ut never used to be a problem, but a few months ago these error meassages started popping up out of no where. Even wierder is that I am connected to the internet with my cable modum, but the computer is still telling me that I'm not. I have called Time Warner and Apple several times, but no one can see where the problem is.
Message was edited by: Vic Sage

"Could not find PPPoE server" sudden error on DSL connection

I am having a serious issue I can't seem to solve.
I currently have two laptops running:
One PowerBookG4 running Tiger that stays connected to the internet through a regular DSL modem, and shares the signal through wifi to another laptop, a MacBookPro that connects by airport.
I have had this configuration for two years and never had any problems.
Recently my network service had a shutdown and came back up in a few hours. Ever since then - without ever changing any configurations - the PowerBook continuously gives me the error "Could not find PPPoE server".
But it is not a network problem because when I plug the cable into the MacBook Pro - that has the EXACT same network configurations as the PowerBook - it connects just fine.
My internet provider explained that it could be a configuration problem caused randomly and that I need to fix it, but I have no idea how to do it. Already scanned the disk, repaired permissions, everything seems fine.
My PPPoE username and password are correct.
Will I have to reinstall the system? Any help would be very very appreciated.

Hi Fernanda , and a warm welcome to the forums!
The Interface that connects to the Internet, needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON. So drag Ethernet up there on the PB if it isn't.
I don't think it'll require a reinstall, first let's drag these files to the Desktop, reboot, and setup everything again...
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist

Internet Connect Could not find a PPPoE server

We just bought the new MacBook Pro and set it all up ok and yesterday bought a D-Link Wireless ADSL router.
We can get onto the D-Link network fine and full signal is shown but when we try to connect the error "Internet Connect: Could not find a PPPoE server" comes up.
Does anyone know what the problem is?
I looked at a couple of other threads with similar tpics but none of them seemed to help me :S
Do I just need to contact BT about it as they are our server or is it something setup wrongly?
I hope you can help me
Lizi

ok, thanks
I've done that but it still doesn't work
whats VPN? and do I have to fill in that first(ie. Server address, not that i know what it would be, Account name and Password)? and PTTP or L2TP?
this s totally conusing me...

My internet continually disconnects. When I added my airport express, I had to call Verizon (my provider) and have them "bridge" my modem. Ever since, my connection constantly disconnects and puts up the message "Could not find a PPPoE server".

My internet continually disconnects. When I added my airport express, I had to call Verizon (my provider) and have them "bridge" my modem. Ever since, my connection constantly disconnects and puts up the message "Could not find a PPPoE server".
Any ideas? I probably have something wrong in my computer settings.

You should restore your modem to router condition and set the Airport Express to 'Bridge Mode'. A full explanation and the method of doing this is here:
http://www.wilmut.webspace.virginmedia.com/notes/airport.html

Error Msg: "internet connect" "could not find a pppoe server"

Hi,
I'm a mac newbie and am having problems with my new MacBook that I just bought and setup yesterday. When the setup asst is asking questions when I first started the computer, I mistakenly chose connect via pppoe. Then, when the setup asst ended, I realized my mistake (b/c I am using a dsl connection that I plug in through my ethernet port), went into system preferences--network-- and chose ethernet, using DHCP. Now I am able to connect to the internet and get my mail, but I keep getting a pop-up window called "Internet Connect" that says "Could not find a PPPOE server". Can someone tell me what I need to change? Thanks.

Welcome to Apple Discussions:
In Network Preferences, where you setup the DHCP, click configure again and select Create PPPoE service, and remove/undo whatever you entered in those dialog boxes. Then re-select DHCP.
Leave the default name, PPPoE but just remove everything else.
If there are any check boxes to connect via PPPoE, be sure they are unchecked.
If that does not help, then in your user library/preferences directory, drag the following file to the desktop and reboot
com.apple.internetconnect.plist
That should take care of it.
Message was edited by: nerowolfe
Message was edited by: Theodore

"Could not find a PPPoE server" help

"Could not find a PPPoE server" this is the message I get when I try to connect to the internet via my wireless netgear modem. I have other Pcs which use this modem and all work fine (non of them are Macs) I have previously been able to connect using my Mac but I haven't been on for while. I tried recently and this is the message I get.
It shows that the connection to my network is very good but it cannot find a PPPoE server.
I have gone to System Preferences>Network>PPPoE where it shows my 'service provider' 'account name' and 'password'. The password is only showing 8 digits but my actual password for my wireless network has 10 digits, each time I try to change the password and click 'apply' it overrides it and puts the password back to 8 digits.
How can I solve this problem and get my mac to connect to my wireless network?

Thank you for your reply, I followed your instructions and found the password for my network in keychain access>show password as you suggested, it shows my password is the very same password that I have been trying to use.
I deleted the old airport account and used the assistant to set up a new account, it asks me to select the network I wish to join and then asks me to put in my selected network password. I put in my password exactly as written in the keychain access and it says "sorry the password you entered is invalid"
I have deleted the password in keychain access and retyped it and pressed save, tried the new account process again and it still says 'invalid password'
Any idea what's going on?

CISCO7606 as pppoe server

Similar Messages

Maybe you are looking for