CiscoView 6.1.9 not showing one X2-10GB-SR on VS-S720-10G
There are two Ten Gig interfacaces on each VS-720-10G on each chassis of a VSS 6509.
Only one of them on each chassis, the port 5, is being shown.
See the details on the attached file.
All CiscoView packages are update as today.
Nothing is attached, but it sounds like you may have found a new bug. II see one other SR open reporting the same type of problem, but there is currently no resolution. I recommend you open a service request so your problem can be analyzed and tracked.
Similar Messages
-
Plan / Actual Comparison Report - S_PL0_86000029 is not showing one month
Gurus,
The TCode, S_PL0_86000029 when being run for just one month, e.g. August (08.2008), it shows the figures for the whole year.
Being the first year on SAP; the month this went GO-LIVE was October.
Data before that since 01.01.2008 till 30.09.2008 was uploaded.
How do we just break it down to one month?
This is quite important.
Thanks.
Edited by: Bhatia on Oct 16, 2008 10:34 PMHi Rau,
Could you please me How to Upload the GL or Open Item Balances on Month to Month Basis? for this we still use FB01 for Initial Upload?
My Client is giving the balance for last year Monthly with daily Transactions with past Posting dates obviously,do I need to Upload with same Posting dates or with Current Posting date?
For reporting Purpose My Client would like to see Monthly Balances of Open items for Initial Upload,"is this same as Month to Month Upload you advised above"?
What is the Difference b/w Month to Month ORr Just one Amount as total balance uploaded to SAP? which is Best Practice before Initial Upload?
Thank you ,
Paarthaa... -
Execute_query not showing the -WORKING ...- Message on Forms 10g
Hello,
There is a strange thing happening with our Forms that were migrated to 10g.
1) Our keys were remapped to the ones used in the 6i Version. For example: CTL+L is F9
2) When a user presses F7 and then F8, on Forms 6i, we have the sequence of message:
Enter a query; press F8, CTRL+q to cancel
then
Working ...
and finally we get the records.
However on Forms 10g, we have when a user presses F7 and then F8 :
Enter a query; press F8, CTRL+q to cancel
and the message -WORKING...- is not shown and after a while we get the records.
There are no message_level before the enter_query or execute_query and there is no :system.suppress_working in the form.
What could be the problem ?1) Our keys were remapped to the ones used in the 6i Version. For example: CTL+L is F9 Key mapping is controlled by the file fmrweb.res in path <DevSuiteHome_1 path>/forms/
Forms 10g is released with a unix style file where Ctrl+L is mapped to List of Values. There is an alternate file named fmrpcweb.res that maps F9 to List of Values. By renaming fmrweb.res to something else, and copying fmrpcweb.res to fmrweb.res, you will get the PC platform functionality.
You can edit the Web Forms fmrweb.res file using a text editor to tailor the function keys any way you need.
and the message -WORKING...- is not shown and after a while we get the records.Hmmm.... I tried that with a simple "default" test form, and indeed, the working... message does NOT appear, even when I set the Query Array size and Records Buffered properties to 1000 and queried a very large table. Why don't you open a Service Request with Oracle, and report back if you find a solution. -
Crystal reports 11: Values displayed in crystal report not showing in VB6
Hi!
I updated an existing lower version of crystal report 7 to crystal report 11. Changes are the following:
1. sql query in VB6 to add fields
2. sql query in crystal report to manipulate values and not use formula. crx11 doesn't allow summary/total in formula fields.
3. report orientation
4. additional fields to view
5. font sizes, length, can grow properties, etc.
When I tested it directly in crx 11, all fields/values are displaying correctly. When I integrated it in VB 6 using Crystal ActiveX Report Viewer Library 11.0 and CR Viewer object, the field is blank.
I've tried several checking like field suppressions, conditional suppressions, etc.
By the way, I also have a report using a subrepot with conditional suppressions. Same thing is happening. The subreport data only displays the alloted space but does not show values in VB6.
Thank you in advance for your help.
Edited by: Naga01 on Jun 28, 2011 8:46 AMThanks for your response.
Before I read your response, I tried tweaking my reports and was able to resolve the issue.
Steps taken to solve the issue are the following:
a. Value not showing one field of four (4) reports.
Solution: I created new ones and integrate it in VB 6. The values are now showing. Tweaked on the line object properties, got a problem with the extended line but solved it by adjusting the height of the detail section.
b. Value not showing in sub-report.
Solution: My report used a shared variable so I can pass the condition to my sub-report. I used the new reports and just pass a query during runtime. The values in the subreport is still not showing. I added a formula and called the value in it. Values in the subreport is now showing.
I'll try to update the crystal reports version as suggested at a later time. -
I was saving files from an old win95 machine to bring them to a new laptop which is windows 7. I plugged in the drive which is not full and I can only see the hp launcher. In drive properties this drives shows 100 pct full.
I can and did pull up an old simple save backup and restore pictures.
The windows 7 machine is a locked down work machine. Maybe the file structure was changed by the windows 95 machine and now my windows 7 machine can not see the root directory?
I have not written to the drive since storing all of the pictures from the 95 machine and unplugging the external hard drive.
I am looking for help on how to see the files in the root directory that I simply use the copy command to move them on to the external drive.OldGhias,
Have you found a solution yet? I don’t know if I will be of any help but I was curious and no one else has chimed in yet.
I don’t quite understand all of your statement.
To clarify, you were making SimpleSave backups from Win95 and cannot see them all on the Win7 laptop?
Or
You were copying files over (SimpleSave utility not used) and you cannot see those files on Win7 but you can on the Win95 machine?
Do you have another Win7 machine you could connect the external to, to see if the files are still not showing (one that is not locked for work)?
On the drive that shows full, can you see it in Disk Management showing the correct size of the drive and also another CD drive? Not your real CD/DVD drive, it’s actually a CD emulator that is attached to the HDD for encrypting the backups and all SimpleSave’s have them.
Lastly, did you reformat the SimpleSave drive to Fat32 first?
My understanding is that USB support was quite limited on Win95 machines. Since Win95 is Fat32 and the SimpleSave drive is by default NTFS, I would think it would not work. -
Why did ps touch does not show saved project and my old project disappear?
Why did ps touch (ipad 4) does not show saved project and my old project disappear?
OldGhias,
Have you found a solution yet? I don’t know if I will be of any help but I was curious and no one else has chimed in yet.
I don’t quite understand all of your statement.
To clarify, you were making SimpleSave backups from Win95 and cannot see them all on the Win7 laptop?
Or
You were copying files over (SimpleSave utility not used) and you cannot see those files on Win7 but you can on the Win95 machine?
Do you have another Win7 machine you could connect the external to, to see if the files are still not showing (one that is not locked for work)?
On the drive that shows full, can you see it in Disk Management showing the correct size of the drive and also another CD drive? Not your real CD/DVD drive, it’s actually a CD emulator that is attached to the HDD for encrypting the backups and all SimpleSave’s have them.
Lastly, did you reformat the SimpleSave drive to Fat32 first?
My understanding is that USB support was quite limited on Win95 machines. Since Win95 is Fat32 and the SimpleSave drive is by default NTFS, I would think it would not work. -
I have been trying to transfer some different movies from my PC to my IPad, but they are not showing in the "movie" folder. I have sync'd the movies (these are mp4 files) that I wanted transfered, but only one is showing in the folder. There are 13 other movies in the folder that have the ICloud symbol in the corner of their picture. I understand that I can pull those movies from ICloud any time I want to watch them, but I want to watch the ones that I've just sync'd with my IPad. How do I find them? After I checked the movies I wanted, I "applied" them and watched it sync and copy the wanted movies to my IPad. Now what? Thanks.
There are some good programs that you could use to convert the format, Handbrake or Mpegstreamclip are two good free ones. Convert them to MP4 and then try importing them again.
-
When I plug in my iPAD or iPod to my Dell one touch computer using windows 8 to synch them they do not show up.
I have synched them both recently on this computer with no problems. I have restarted everything ( computer , ipad , ipod ) multiple times
and used different usb cords and ports but nothiing works.Hello abaneki,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Have a nice day,
Mario -
When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?
The problem is that I burned these CD's myself from music that I added from my personal collection to iTunes. The INFO is ON the CD's (it appears perfectly when I put the CD in my Numark mixer...so I know the info is on the CD), but for some reason, my MAC PRO will NOT read the info on the burned CD when I place the CD into the MAC PRO. The CD was burned on a MAC that I no longer own. But there HAS to be a way to transfer songs from a burned CD with the INFO that is on the CD burned with iTunes.
PLEASE HELP!
-Old Appel -
I've been trying to download this song for two days. ITunes says that it downloaded, and that I purchased it, but it will NOT appear in my music. The weird thing is that I bought two songs simultaneously and the first one successfully appeared and I can listen to it. Totally fine. However, the second one will finish downloading, then disappear. I bought the same song two more times off of different albums just to make sure there wasn't a problem there. Nope. Everything with that song title will not show up. Rhapsody in Blue, by the way. I also bought it on my iPod touch just to make sure there, and it successfully downloaded and I can listen to it on my iPod without a problem. Again, it just won't go on my IPHONE. It's frustrating. Any advice or help?!
Hi EFlanders,
Here are some ideas on how to find the lost media:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
This article explains how to transfer purchases from your iPhone to iTunes:
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/ht1296
Cheers!
- Ari -
Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).
Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe -
HT1386 I have one album on my IPod Touch that does not show up on ITunes.
I am trying to download my music to the libraries on my computer. I noticed that one of my albums is not showing on ITunes but is showing up on my IPod.
No problem. Glad to have helped.
Not sure as to why it happened. I just know this has been happening to a few users lately. It may be with how you have your iPod touch configured to sync Podcasts. So you may want to double check these settings as well as mess around with them a bit to figure out if that is the cause. Otherwise, I'm not entirely sure on this one. Sorry I cannot be of much help here.
B-rock -
I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?
Is it because the new itunes looks different.
View > Show Sidebar
Then it should work just the same as on your old computer. -
A new post to my iTunes U course shows up in my course both on my Mac and my iPad Air, as well as on other students' iPads, but for one single student. We have closed the app and forced shutdown. Student recently added more icloud space, but that is all. iPad is up-to-date in terms of iOS and iTunesU app. The student has only one Apple ID associated with her iPad.
We have reposted two more times. The second time the post showed up for a few seconds, but then disappeared. It does not show up under any other section (assignments, discussions, etc). Any assistance is greatly appreciated.Have you contacted Apple support?
I don't know if these will work, but you could have the student try the following:
logout of his or her iTunes U (i.e., iTunes Store) account using Settings
force-quit iTunes U
relaunch iTunes U
sign in to the newly launched app when prompted
I hope that helps! -
Talent Search not showing name for one employee
Hi
I am facing issue in talent search, it is not showing employee name after search. This is happening only for one user, means surely it will be master data issue,application is working fine.
But now I want where to see that data maintained.
Please help with this if anyone knows about it.
-YogeshHi Yogesh,
If it is only one employee that it isn't showing for then it could be authorizations. Some other suggestions are:
- Incorrect or no name for CP object
- Incorrect authorizations of user used for delta-indexing
My guess would to be to look at authorizations first.
Best regards,
Luke
Maybe you are looking for
-
Novice question: ArrayList error
Two classes: Bank and Customer. Customer class has this constructor: public class Customer { protected String cust_name; protected int card_number; protected double current_bal; protected double credit_limit; public Customer(String ID, int CCN, doubl
-
Can I and How do I copy from one iWeb site to another.
I currently have a few different versions of my web site stored as different doman.sites I would like to copy a blog entry from one into another. Is it possible to do that and if so how. I am sure I could copy all the text and all the pictures separt
-
What is the Shake 4.1 Retail Version
Hi, I want to buy Shake 4.1 and I noticed that some say Shake 4.1 Universal and some say Shake 4.1 Retail Pack (Apple SHAKE 4.1 RETAIL PACK Part #: MA434Z/A). I just want to make sure I get the right thing. Are they both the same thing? Does one allo
-
Fast refersh materialized view having group by in it's select query
Hi, Can any one please tell me from which version of Oracle we can create a fast refresh materialized materialized view having group by in it's select query. Regards, Koushik
-
For some days now Firefox keeps asking me to update to Firefox 31.2.0esr, although I have done this already without receiving any error message. The program is on 31.1.0