Ciscoview Package File for Nexus 7010
I found an old support modules table at
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_ciscoview/device_support/table/cvsdt.html
dated Feb 28, 2012. I cannot find one newer.
I have LMS 4.1 and I'm trying to render a Nexus 7010 in Ciscoview. I have downloaded the latest package files. The Sup2 and Fab2 modules (N7K-SUP2 and N7K-C7010-FAB-2) show as "unsupported card".
What packages and versions are required to recognize this card with LMS 4.1?
The Sup2 requires 9.0 of the package file (dated 1/2/2013). You can download it here. (Click all Releases, 6.1.0, then choose the Nexus 7000 package.)
The readme is here. It mentions the N7K-C7009-FAB2 is supported (since 7.0) but nothing about the 7010-FAB-2 so you may still be out of luck on that one.
Similar Messages
-
Critical Alarm for Nexus 7010 device
Hi Team,
We are getting Critical Alarm for the Data center device Nexus 7010 continuously from 28-Oct.
error (device hde1) in start_transaction: Journal has aborted - kernel
2012 Oct 29 10:00:18.227 DC-Core-Switch2 29 10:00:18 %KERN-2-SYSTEM_MSG: EXT3-fs
error (device hde1) in start_transaction: Journal has aborted - kernel
2012 Oct 29 10:28:37.497 DC-Core-Switch2 29 10:28:37 %KERN-2-SYSTEM_MSG: EXT3-fs
error (device hde1) in start_transaction: Journal has aborted - kernel
2012 Oct 29 10:28:42.398 DC-Core-Switch2 29 10:28:42 %KERN-2-SYSTEM_MSG: EXT3-fs
Also attaching the complete logs collected for this device and suggest if there is any Hardware related issue or some Software related issue.
Regards,
AshutoshHello
hde1 is the logflash device. Looks like there were IO errors and the kernel mounted the fs read-only. You can try to reload the device and if logflash will come back up fine after the reload, its a transient issue; if the issue comes back, the logflash device most likely is damaged bad and needs to be replaced. You will need to open a service request with TAC to get it replaced.
HTH,
Alex -
Packaging files for service providers in Illustrator CS3 necessary?
Hi, i need to
package my files in Illustrator for a service provider
tonight in the same fashion one would do
in InDesign for a service provider.
But Illustrator does not have 'File->package.'
From what I can see I might go to the links palette
and use that to embed images?
But i was also told that you usually don't want to embed
Well, i'm obviously confused, anyone who can point me in the
right direction, that would much appreciated,
Thankyou.Yeah, there's no easy way to package up the fonts unless you use Art Files or Scoop. From "Find Font..." you can then go to the finder and search for the fonts you've used. If it's only a couple, it's not too bad. Just make sure you get the right versions... (I know I have about 20 faces of Futura...)
If the service provider isn't going to be making any changes to the copy, then there is really no reason not to outline the fonts.
Outlining fonts changes them from text to shapes, treating them just like any other shape in your file, removing your ability to edit text (so it should be one of the last steps in your pre-flighting of a file) and it guarantees that what you send the printer is what you'll get back.
Keep a live (not outlined) copy of all your files for future use and send the printer an outlined version.
Or, if this is something you're going to be doing a lot of, and you don't want to outline the fonts, look into Art Files or Scoop. I know Art Files is only like $50, and it works great. -
I want to send my SWF file (created in Captivate 5) for review, but I cannot use the Captivate Reviewer. I simply want to send this file to someone in email.
When I publish and run the project in my browser, everything works. However, when I simply run it from the SWF file a few things are missing.
There is a loader that runs an animation that pulls my course title from a text file. I can't get that title to show up.
Secondly, the navigation bar is not present in some of the slides; and I know it's set properly, because it appears when I preview in my browser after publishing.
Any ideas how to correct this and how to most effectively package these files for review, if you're not using the Reviewer?Hi Harooki,
The best thing would be that you zip the entire published folder and then e-mail it to your reviewer. For your SWF to show everthing properly - There is a loader that runs an animation that pulls my course title from a text file - all external dependent files should be present in the folder.
-Manish
blogs.adobe.com/captivate -
Adobe indesign CC on mac X 10.7.5 - freeze when package file for print
Has anyone else had this problem or can suggest a solution?
When I have a file in indesign ready to print i go to package it and it get to the little loading bar and freezes indefinitely. No package and i have to force quit. Real pain!
HELP!FIddled around with a few settings and got it to work. Thanks for your help BOB LEVINE :-)
THIS FILE WORKED
THIS FILE FAILED -
SCORM package files for Dreamweaver/Coursebuilder interactions
Gentlefolk;
Trying to see if I can get Dreamweaver (CS3) with Coursebuilder interactions to play with LearnCenter LMS. The site is not loading because the LMS can't find the SCORM manifest files.
I don't see an export function in Dreamweaver that would create the manifest files. Is there a way to generate the manifest files, so LearnCenter has something to grab onto?
Or have I tumbled to the reason everyone is using Captivate?
Many thanks!
DonHi Vijay;
It has been a while since I started this thread or even looked at it, so I am hazy on my original inquiry. I will have to look again. Short answer to your question however is that every tool I play whith that outputs to SCORM-compliant content automagically creates the manifest files and all the related support files.
I just wanted to acknowledge your message right now. Let me look at the original thread and see if I have any more information that may directly assist you.
Don -
"cannot copy necessary linked files" when trying to package files
I am trying to package files for a customer and I get the message "cannot copy necessary linked files". Nothing shows as missing or any errors. Anyone else encountered this?
It's REALLY annoying that this hasn't been fixed...
In Sweden we use a lot of å, ä, ö. And it's never a problem to name files with these characteres (and yes, I use an Apple computer).
Before you could always copy all the files without any problems, but these days you need to rename them.
Which can a totall nightmare if you have a file with hundreds of pictures... then you need to go through the whole list of links, carefully change all the names and then update them every single picture one by one.
Which means hours of totally meaningless work. -
Where can I download adobe File Packager tool for Windows?
Dear all,
I need to understand the detail format of f4f files, but the only useful information I can find is the following:
http://www.adobe.com/products/httpdynamicstreaming/pdfs/httpdynamicstreaming_wp_ue.pdf
Is there more detail specification for f4f ?
Where can I download adobe File Packager tool for Windows?
It seems to me the following specification is not correct for f4f, at least the parts talking about "mdat" box
http://download.macromedia.com/f4v/video_file_format_spec_v10_1.pdf
Thanks,
XuedongAs per your question – follow this link http://www.adobe.com/products/adobe-media-server-family.html, download and install AMS Starter, then inside \tools\f4fpackager you’d find the F4F packager command-line application.
-
To change "package" file format to "flat" files for iDisk
First, let me thank Yvan Koenig for providing a great script to convert "Word2Pages"...
There is a problem at present discussed on the MobileMe forum page, with files not uploading to iDisk using Finder. One problem is that whereas "flat" files load, "package" files do not. (There is a choice in the Pages Preferences for these options.) This limitation also applies to emailling files.
I used Yvan's "Word2Pages" batch conversion script for hundreds of files which saved me days of work. However, to load these onto my iDisk I need to convert them to "flat" files.
Please can I humbly ask him to write a similar script for converting files from "package2flat". I am not so advanced as he in computer literacy and would surely appreciate his help.
Message was edited by: putnikYvan,
Thank you finding a solution to the default setting. I wonder how many Pages 09 files have been produced as packages with umpteen subfolders for things that will never be used. No wonder my Finder kept on crashing when I tried to upload to my iDisk.
I have written a bug report to Apple via Pages so hope they will change the default setting for "Copy Audio and Movies to the Document".
I am puzzled about your Word2Pages script still producing "package" files even after making the changes to default values that you describe. Could it be that the code is calling up old default values from somewhere else. There seems to be a plist in the Application folder and another in the User library.
Is this the relevant piece of code?
on getPlistValue(valName, default)
local thePlist, u
set thePlist to (path to preferences folder as Unicode text) & "com.apple.iWork." & theApp & ".plist"
tell application "System Events"
if exists file thePlist then
tell contents of property list file thePlist
try
set u to (value of property list item valName) (* Unicode Text *)
on error (* Here if Numbers never saved with the new preferences file. *)
set u to default
end try
end tell -- to contents of…
else (*Here if there is no preferences file. *)
set u to default
end if
end tell -- to system events
return u
end getPlistValue
Well I am trying to learn Applescript but not finding it easy.
Message was edited by: putnik -
Reset config files for a package
According to https://wiki.archlinux.org/index.php/Pa … save_Files I have this situation in my config files:
original = X, current = Y, new = X
Is there a way to set current config files of package to X and save Y as .pacsave OR install X as .pacnew and leave Y in place without removing package?
Last edited by Evgeniuz (2012-03-12 22:00:00)I'm not positive I'm understanding you right, but if I am and you are talking about basically backing up a package's config file, it is pretty simple. I believe the .pacnew and .pacsave refers to changes in the makeup of a package in general, not its config file.
To change back to the original config and save the modified version you can just add .backup or anything onto the end of the file that you don't want to use right now . Then, you just need to save the file that you want to use as the config file with wthe filename of the configuration file for that package (so the same but w/o the .backup).
Sorry if I am misunderstanding you and you really did mean .pacnew or .pacsave and not config files. Or if I am totally wrong but that is my understanding of config files and I know it has worked for me in multiple instances.
~Boz~ -
Hi there, I've been trying to deploy one of my AIR apps on the BlackBerry Tablet (PlayBook) Simulator and and have run into a problem packaging the .bar file using the command line. I started this off by reading the article at:
http://www.adobe.com/devnet/devices/articles/blackberry_playbook_battery.html
I followed some of the steps there, but found this article on how to package my files using a command line more helpful (the Adobe article doesn't even explain how to package the .bar file using the command line):
http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/Compile-and-Debug-witho ut-Flash-Builder-Using-a-Command-Line/ta-p/628675
Everything was going great until I went to compile my application and received the following error:
Exception in thread "main" java.lang.NoClassDefFoundError: com/qnx/bbt/airpackag
er/BarAirPackager
Caused by: java.lang.ClassNotFoundException: com.qnx.bbt.airpackager.BarAirPacka
ger
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Could not find the main class: com.qnx.bbt.airpackager.BarAirPackager. Program
will exit.
Has anyone run into this issue when trying to package a .bar file for the BlackBerry Tablet (Playbook) Simulator? I've tried using a SWF published in CS5 and CS4.Just thought I'd reply to my own post, in case someone else runs into this problem. Make sure you have the latest and greatest versions of the JDK and JRE installed on your system, in addition to the requirements listed in BlackBerry's list of installs:
http://us.blackberry.com/developers/tablet/adobe.jsp -
Package name for Toplink generated file
Is there is way to specify a package name for the java file generated when you export a project.
Thanks,
RajivYes, select the project in the mapping workbench, click on the "Defaults" tab.
There's a checkbox called "Specify Project Package".
Darren
Is there is way to specify a package name for the java file generated when you export a project.
Thanks,
Rajiv -
Packaging InDesign CC file for CS5 user
We just upgraded to InDesign CC (9.2), but the graphic designer I work with uses CS5. I need to package some files for her but do not know how to do it so that she will be able to access a compatible file. Thanks.
Package it. Close the file and then open the one in the package. File > Save as and change the type to InDesign CS4 or later (IDML).
You should probably send a PDF as well since the chances of a perfect conversion are close to zero. If that file is getting returned to you, you are in for a world of pain trying to work this way. -
Binding file for controlling package name
I looked at the related links, tried a few examples, not much success...
I realize this can be solved with more effort, but just trying the easy path, so ... ignore this if looks unreasonable, I know how busy developers feel...
Is there a good example to conform to these requirements:
Basically i would like binding file as a child element for wsdlc running in JAXWS mode that will follow package naming rules for JAXRPC... meaning:
Java files generated from xsd will match package name with xsd name space, while for JWS classes control specific package name ...
Most of my attempts failed due to xpath complaining for not finding any element for the node ...
Binding attempt 1: make all classes serializable
============================
<jaxws:bindings
xs:schemaLocation="Customer.xsd"
node="/xs:schema">
<jxb:globalBindings xmlns:jxb="http://java.sun.com/xml/ns/jaxb"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<jxb:serializable/>
</jxb:globalBindings>
</jaxws:bindings>
Binding attempt 2: keep same name for xsd classes
============================
<schemaBindings>
[ <package> com.myown.pack</package> ]
[ <nameXmlTransform> http://xmlschema.my.xsd.com/CustomerCall </nameXmlTransform> ]*Yes, select the project in the mapping workbench, click on the "Defaults" tab.
There's a checkbox called "Specify Project Package".
Darren
Is there is way to specify a package name for the java file generated when you export a project.
Thanks,
Rajiv -
Nexus 1000v Eval Licence File for ASA1000v
Hi Guys,
We have installed N1K working no problem and now installed ASA1000v with VNMC using ASADM mode. The device is registred to VNMC and Security profiles set, access rules set against with NAT. Port profiles created on the N1K with the VNMC path and Security profile attached. I now realised i require the Licence file for the following packages;
gs2-cldnexus-01# sh license host-id
License hostid: VDH=1956902401137053593
gs2-cldnexus-01#
gs2-cldnexus-01# sh license usage
Feature Ins Lic Status Expiry Date Comments
Count
NEXUS_VSG_SERVICES_PKG No 512 Unused 05 Aug 2013 -
NEXUS1000V_LAN_SERVICES_PKG No 512 Unused 05 Aug 2013 -
NEXUS_ASA1000V_SERVICES_PKG No 16 Unused 05 Aug 2013 - <---- This licence is required
All documentation points to the following link but its dead. Does anyone know where i can download the licence file from?
www.cisco.com/go/1000veval
Regards
DarrenHere is hte patch you may be looking for:
http://www.vmware.com/patchmgr/findPatch.portal?product=ESXi+%28Embedded+and+Installable%29&version=121
Maybe you are looking for
-
Center text vertically in DIV.
I need to center the text vertically in the div at the bottom of this page. How do I accomplish this? I searched this forum, but couldn't find anything on it. http://www.liquidfirefishing.com/ocmc
-
RSS feed not working correctly
I have several RSS feeds and have for a while. All of a sudden, one feed (NYT Travel) started coming into my InBox as well as into its RSS box. If I delete the article from INBox, it's deleted from the RSS box. Same in reverse. However, I can't move
-
How do i change the white background with the new ios7?
I just upgraded my iPad mini to iOS7 and now my videos are not titled, or the letters are white and are invisible against the new white background. How can I change this??
-
Hello All, We're encountering REP-56048 when running any report (including a report consisting of only simple text with chinese characters, no retrieval from any database). Before we can run the report but the chinese character cannot be displayed (d
-
I'm not sure if MHP can support .eot (Embedding Open Type). I'm trying but I receive a "Font Not Available Exception" and a null pointer excepcion because the font variable "arial" is null. This is the dvb.fontindex: <?xml version=?1.0??> <!DOCTYPE f