CiscoView v5.5 terminal access to devices via SSH

I have just installed all of the components for VMS v2.3. CiscoView 5.5 is one of those components that I am attempting to configure for SSH terminal access. The default terminal connection method to devices is Telnet.
Is there a way to configure CiscoView to terminal using SSH v1.99 and fallback to Telnet if the end device does not support SSH?

Choose Device Manager > Administration > Cisco View Server Admin > Debug options and display log. In the window on the right with the name "Configure CiscoView Server Trace Settings," check the SNMP Trace and Activity Trace check boxes.
Click View Trace. A new window opens that shows all the SNMP activity between the device and the server once you have opened the device in CiscoView

Similar Messages

ASA Cannot access https device via Clientless VPN bookmark, site to site works fine

We've got two offices connected via an IPSEC tunnel. This site to site VPN works great, we can access our remote devices fine from a PC on either LAN at each office. The device's address is https://192.168.210.2
However, if we make a bookmark on the Clientless VPN for that same address the conneciton just times out if it has to go over the site to site VPN.
We plugged the exact same web enabled device on the local side of the VPN, put in a bookmark for its https address and it works fine. Its just remote bookmarks for devices on the other side of the tunnel do not work.
Looking at the debug log I see the request going out from the source to the destination on port 443 but nothing more. The NAT exemption etc are all right because people on the LAN have no problem accessing this device remotely with their browser.
I haven't been able to adequately describe this problem to find a matching Cisco example, anyone know how to fix this?

hi luis,
thank you for your reply. we've checked the smoothwall configuration, but couldn't discover anything which could cause this problem. we even tried replacing the sa520 with a draytek vigor router to set up an lan-to-lan vpn with the smoothwall. with the draytek in place we have no problems accessing the aforementioned servers, so it seems the issue is with the SA520.
what exactly do you mean by creating an ACL from the remote WAN to our LAN? i assumed you meant creating a firewall rule, allowing traffic from the remote device's public ip to our LAN. however, in that case i need to enter an ip address of a device in our LAN, or else i cannot save this rule. as a test i entered the ip address of my machine as the destination address, but am still unable to access the aforementioned servers.
here's how i set up the rule:
from zone: UNSECURE (WAN/optional WAN)
to zone: LAN
service: ANY
action: ALLOW always
schedule: (not set)
source hosts: Single address
from: public ip of one of the aforementioned servers
source NAT settings > external IP address: WAN interface address (cannot change this setting)
source NAT settings >WAN interface: dedicated WAN (cannot change this setting)
destination NAT settings > internal ip address: 192.168.11.123 (ip address of my machine)
enable port forwarding: unchecked
translate port number: empty
external IP address: dedicated WAN

Settting Up Time Capsule to Access NAS Device Via FTP

Have had problems accessing my NAS via FTP when trying to connect to it from an outside network. Have never been able to access and login either anonymously or using one of the user names and passwords that I have set up from outside the home. When at home I am able to connect to the NAS via FTP on the LAN no problem so I am almost positive that I have not properly set up the Time Capsule.
My NAS also uses a web server feature that I am able to use by forwarding the proper ports on the Time CApsule and setting up a DynDNS account.
I would just use the web server feature but it's limited to accessing files under 2TB.
Would GREATLY APPRECIATE any advice on how to solve this problem.

charliprkr wrote:
Have had problems accessing my NAS via FTP when trying to connect to it from an outside network.
Welcome to Apple's discussion groups.
It sounds like you need to configure your Time Capsule to do "port mapping" of FTP ports to your NAS. In AirPort Utility enter "manual setup" mode with the Time Capsule, then select the Advanced panel and the Port Mapping tab. Click the plus sign at the bottom, then choose "FTP Access" as the service. Supply the LAN IP address of your NAS. Now direct your FTP requests to the WAN address of the Time Capsule.

Accessing Disabled Accounts via ssh

We have user accounts on our OS X Tiger Server where the user has installed a public key into their ~/.ssh/authorized_keys file.
The problem:
If I uncheck "access account" in Workgroup Manager for one of those users, they can still login to the server via ssh, authenticating with their private key.
So, how can I truly disable access to an account that has a key pair installed for ssh?
Mac OS X (10.4.5)

Have you tried using WGM to change their login shell to "none"?

After upgrading Flame device to 2.0 production, can't connect to device via USB. Is there any hidden step I missed?

Hi guys, I upgraded mi Flame to FirefoxOS 2.0 following the guideslines on https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/Flame.
I updated to 'latest v2.0' of production builds. It rebooted normally and I checked out version improvements, but I now I can't access the device via adb or fastboot or throught Web IDE.
I selected ADB and developer tool for USB debugging and nothing. Only ADB and nothing.
I even tried factory reset but It kept v2.0 and no adb connection :(
Any suggestion?
Thank in advance
Héctor Fernando

Hi hectorfhurtado,
I encountered the same issue today when attempting to file and log some bugs for Firefox OS. I asked on the IRC channel #b2g and got the following response from Fabrice:
"''known bug, should be fixed in tomorrow's update.''"
I hope this information is helpful. Please let us know if you have any other questions.
Thanks!!
- Ralph

How to enable fast user switching remotely via SSH?

There is a Mac which at the moment doesn't allow fast user switching. I have admin account on this Mac. Currently, another user is logged in, so I can access the Mac only via SSH. I don't want to destroy the session of that user otherwise the user can loose important data.
Can I enable fast user switching by accessing the Mac via SSH?

Try this:
defaults write /Library/Preferences/.GlobalPreferences MultipleSessionEnabled -bool YES

I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

I had a problem with a 5.0.3 project that would cause 5.0.4 to crash. Apple asked for a copy of the project and later told me it was because there were some empty text layers. Apple is aware of the issue and is working on a fix.
In my case I still had 5.0.3 on another Mac and could clean up the project. If empty text layers might be the problem, do you know someone with an earlier version who could open it and remove the empty layers? I'd be willing to give it a try if you'd want to send me the project.
Ross Hunter

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this?

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this? Also, I cannot connect to my Photosmart b209a printer, though a different computer - same Macbook Pro can. I tried redownloading the software, but in the setup I get a "device not reachable" message: "However to continue configuring the device in network, your Mac must have access to the device. So please make sure that your Mac has access to the Network ..." I've checked my network on the system preferences and it's properly connected. I'm on the net as I do this. Tis very frustrating, and any assistance woud be appreciated.

Airport Utility is for administration of genuine Apple Base Stations. If you have a different Brand, Airport Utility can do nothing for you.
I think they're using ethernet.
To connect a Printer via Ethernet, no password is needed.
We already tried the password for the internet and that did not work...
If a password is required to connect to the Internet, then WiFi is likley being used, and that WiFi password is the one needed for the Printer connect wirelessly as well.
What make&model Printer? Is it indeed a Wireless Printer? Most connect via USB, but that would force it to use a specific computer to assist in printing.

Airport Extreme: How to connect a Linksys VOIP device via ethernet

Hi there!
I am trying to connect Linksys PAP2T device via ethernet to my Aiport Extreme. It gets an address assigned 10.0.1.2 but when I access the device, I am not able to connect to internet. Do I need to key in my network password anywhere?

Okay, so to answer my own question after considerable sleuthing . . . for anyone else trying to do this:
Connect your computer to the bridge using an ethernet cable, then open a browser and enter the following address: http://169.254.1.250
This will take you to a login page: leave the username field blank, enter "admin" in the password.
You will see the Cisco setup page. I selected manual setup and entered the name of my network and password. I got a progress bar and finally the wireless network light on the bridge started flickering.

Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV

Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV. Whenever I try to put my info in it says to try later. When I test network it says network time has not been set. It has worked previously.

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

How do I set up an administrator account so my daughter who is under 13 , so she can access itunes herself. Main access will be via itunes vouchers . I don't want to create credit card access.

how do I set up an administrator account so my daughter who is under 13 ,
can access itunes herself. Main access will be via itunes vouchers . I don't want to create credit card access.

There is no such account. The iPod is really a one-user device
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
You can then redeem a gift card(s) into the account

Help needed restricting users admin access to devices using ACS 4.2

I have users that access the network via a VPN client to a PIX 515 which authenticates to the ACS (using the default group for unknown users) which uses an external Active Directory Database.
The problem I have is that as the ACS authenticates these users, it now allows them admin access to the PIX. How do I restrict access? I have looked at NARs using the 'All AAA clients, *, *' approach but that just stops their VPN access. ( I have a separate group called 'PIX ACCESS' which will contained only defined users for admin access).
Incidentally I have other devices on the network which are AAA clients, in particular Nortel switches. I can set the group settings for that RADIUS set up to 'Authenticate Only' (RADIUS Nortel option) and that works fine, I was expecting the ACS to have a similar setting for TACACS+.
So how do I allow the unknown users to authenticate to their AD database but restrict them admin access to the AAA clients?

Very common problem. I've solved it twice over the last 6 years with ACS. I'm sketchy on the details. But here goes. First option to explore is using RADIUS for VPN access, then TACACS on all the Cisco switches and PIX firewall. That would make it alot easier. I think that with TACACS, you can build a NAR based on TCP port number instead of IP address....
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_tech_note09186a0080858d3c.shtml
So you'd have a group with 3-4 Administrators that can access PIX CLI, and another group of VPN users that can't access the PIX but can VPN in. So on the VPN group, put a NAR that restricts access to SSH/Telnet TCP ports?
This comes up everytime I install an ACS server, (every 2-3 years), and it's always a trick.
Please let me know if this works for you. And if it doesn't, let us know how you fixed it. I think I can get back into the ACS I last did this with and take a look, but I'd have to call up and make a special trip.

404 error while accessing sicf services via apache reverse proxy

Hi,
I set up an reverse proxy with apache 2.2 and try to access SICF Services via this proxy. I got the following error message from the sap system:
Service cannot be reached
The termination occurred in system SMP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NE-SSMP01_SMP_00-v:0-s:404-r:Notfound
When I access J2EE services via the proxy it works.
Is there any configuration which have to be done in the ABAP Stack for accessing Services via the proxy server?
For tests I tried to access the simple ping service ( /default_host/sap/public/ )
Thanks and best regards,
Tim

Hi Oliver,
I allready checked the SDN posts for the reverse proxy. Maybe I missed something.
The ProxyPreserveHost is on.
I redirect to the ICM. I only redirected to the J2EE for tests. This worked by the way withe the same conifiguration.
Here is my apache config:
VirtualHost *:5443>
        ServerName      domain.com
        ServerAdmin     test.de
     ProxyPreserveHost On
     #ProxyVia On
     #AllowEncodedSlashes On
Rewrite Rules
- forward sap/public/ping?sap-client=001 -> Test Ping
- Passthrough /sap/public/ping/*
- Redirect any other URL -> Test Ping
        RewriteEngine On
        RewriteRule     ^/sap/public/ping?sap-client=001$     /sap/public/ping?sap-client=001          [R,L]
     RewriteRule     ^/sap/public/(.*)                     /sap/public/$1                    [PT,L]
     RewriteRule (.*)                               /sap/public/ping?sap-client=001          [R,L]
     RewriteLog logs/rewrite_SMP.log
     RewriteLogLevel 3
Reverse Proxy to
- Disable Forward Proxy
- Allow Connections from All
- Reverse Mapping for 302 Response
- Forward / Requests to domain.com:8000
        ProxyRequests Off
        <Proxy *>
                AddDefaultCharset off
                Order Allow,Deny
                Allow from all
        </Proxy>
Forward Rules
     ProxyPass             /sap/public/ping          http://domain.com:8000/sap/public/ping?sap-client=001
     ProxyPassReverse      /                    http://domain.com:8000/
</VirtualHost>
Best regards,
Tim

"windows cannot access specified device, path or file", adobe reader x

hi,
i had an older version of reader (9.something i think) that started making troubles, so i removed it (via control panel) and tried to use reader x instead. but after installing it i tried to run it and got this message titled "c:\programfiles\adobe\reader10.0\eula.exe":
"windows cannot access specified device, path or file. you may not have the appropriate permitions to access the item".
after clicking "ok" the program shuts.
i downloaded this version from adobe's site and registered. i also tried to go back to version 9 but the installation itself wouldn't go.
i'm using windows xp and downloaded reader using chrome. i deleted all previous adobe reader files from my computer prior to downloading, so it should behave as if this the first time this program was installed on it.
how can i solve it? (i've already tried going through the whole process again and again)
thank you for any help.

I have found out how to solve this issue..
Took A few days to figure it out and a lot of installs and un-installing
Install CS6 master collection again and restart your machine- Make sure all anti-virus is disabled
What you have to do:
1. Press Start
2. go under "Abode Master Collection CS6 (it should say its empty)
3. now left click the folder "Adobe Master Collection" and open it..
4. it will now come up with all programmes that SHOULD have worked - their thumbnails will not be visible it will look as if its corrupted.
5. Now this is a long procedure- go on the first shortcut, lefts click and go to properties.
6. Then select the option that says "Open File Location" it will then take you to its main folder.
7. Left click the highlighted Programme within the main folder, then go on properties
8. Go on the security Tab, press "continue" then you go on "Add" then type your account name, then "check name" then tick the box "full control"
9. Then navigate to the "compatibility" Tab and select "Run this programme as an administrator (if you don't do this it will come up with another error)
You should now have the thumbnail (picture) for the programme now
You have to now repeat this for the rest of the programmes/shortcut's within the "Adobe Master Collection" Folder

To Restrict SQL account from accessing Sql server via SSMS

Hi All,
We are planning to tighten the security of our SQL Server.
In the initial phase, we want to restrict all the SQL accounts(except sa) from accessing SQL Server via SSMS
Since the SQL passwords are used in the connection strings(plain text) of our .NET Applications, developers are able to see it and they are accessing SQL server through SSMS with the credentials in the connection string.
The requirement is, SQL accounts should only be accessing the databases through .NET applications and not through any other applications like SSMS, SQLCMD...etc
1) We tried "Logon Trigger", but later we came to know that there is security breach in it.
2) Application Roles - Password is plain text, again back to square one.
We are looking for an alternate. Please share some ideas.
Thanks & Regards,
K.P.Senthil Kumar

The basic presumption here is that there is on way you can tie a connection to an application as such. There is app_name(), but since this is passed from the application, the application can call itself whatever you want.
As long as it is only a matter of keeping business users out, you can solve the issue with some three-tiered solution. Either by having a true middle layer, or just having a web server, or the application running on Terminal Server or Citrix.
But you want to keep the developers out who work with the code. That makes it difficult to lock them out of the middle layer.
Then again, you say "our SQL Server" is that singular? Don't you have more than one SQL Server? One for developement, one for test and one for production? If you only want to keep the devs out from development, you have different usernames
and password for different environments, and they are read from config files. The config files for production should be well-protected.
By the way, only permitting sa from logging in from SSMS is bad idea. Rather, you should disable sa, and everyone should log in with their individual Windows account. And those who should perform system-administration tasks should be member of sysadmin.
Erland Sommarskog, SQL Server MVP, [email protected]

CiscoView v5.5 terminal access to devices via SSH

Similar Messages

Maybe you are looking for