Ciscowork 2000 User tracking problem: not listing all IP address
Hello All!
We are troubleshooting ciscowork user tracking function and we don`t get any ip address outside the subnet where the server is!
Can someone explain how cisco work get the list of all ip addresse SNMP, CDP, scan ...??? From what I have read it seem to be from SNMP. Can I found which OID it use?
User tracking list all mac addresse, all switches but not the ip address. It is not in vlan 1. It stop working since we close vlan 1 and move the server to another vlan.
If your answer is: " cisco work can't see your gateway" Can you be more precis...I have seen that sentence but I don`t what that means...
thanks
ch
First i would check to see if ANI actually discovered teh device. After checking that the IP address filter is correct and your snmp strings are correct then u can try lengthening the snmp retry timeout values: Also check DNS or your local host file for any typos.. failing this try some of these :
Click on Diagnostics > Discovery Metrics > and click on the hyper link number of devices.
This will show u exactky what ANI has discovered and its CDP relationship to other devices. If you do not see your router or L2/L3 device there, then u can try the following:
- check cpd neighbours and correct as required and retry discovery
- select jump router boundries from Setup > ANI admin > Discovery Settings and retry
- if all fails then add the device as part of the seed file.
Similar Messages
-
FileSelectPopup in LW/CVI not listing all directories/files in linux.
This is concerning a port of Windows based software to Linux. The FileSelectPopup dialog does not list all the files and folders in the current directory. For example, if I look in /home/pshrewsberry I can see everything but when look in /home I cannot see pshrewsberry! Another example: If I am in a directory "test" which contains directories A,B,C and D only B and D are listed. The same happens with files as well: In the FileDialogTest directory that I have attached to this post when I browse this directory using FileSelectPopup I can't see the cvibuild.FileDialogTest directory (created after building) nor can I see the binary "FileDialogTest".
This problem does not happen in all directories that I browse through either. I can't seem to find a rhyme or reason to it. File permissions on all files in FileDialogTest (for example) are the same and UID and GID are same as well but the FileDialogTest binary and the cvibuild.FileDialogTest directory are not listed. If I run as root I get the same results.
I have tested this in Linux with LW/CVI8 and the LW/CVI 2010 beta and I get the same erroneous results with both.
Could this be a bug in LW/CVI for linux?
Thanks
-pete
Attachments:
FileDialogTest.tgz 4 KBI'm not sure how to track a corrective action request.
What is the timeframe for this to make it into a beta or a distro. I just went throught this before concerning another problem that I found. We ultimately received an updated shared object file (*.so) to fix the issue before the ultimate release of fix in beta. That resolution is preferable for this issue as opposed to waiting for the next official update.
Thanks,
-pete -
LMS 3.2 and user tracking problem
rme 4.3.1
cm5.2.1
cv 6.1.9
dfm 3.2.0
ipm 4.2.0
portal 1.2.0
cs 3.3.0
cwasst 1.2.0
running on windows server 2008.
This was a clean bulid, and we imported all pertinent data from our old lms 2.6 server. This was in september 2010. Everything worked as expected and continues to work except for......
We are in an upgrade cycle for our 4500s. We are upgrading from 12.2.50-sg4 to 12.2.50-sg8, and also upgrading rommon to 12.2.31r-sga4.
It appears that user tracking is not working anymore for the upgraded 4500s. UT still runs, and works perfectly for all other devices, including the 4500s that have not been upgraded yet. I know this sounds goofy, but it really does seem to be the common denominator. I've checked the windows updates, package updates, etc in trying to figure out what made this happen. It really does all come back to upgrading to the above version. All aspects of this server are running great and as expected, it's just that UT for the upgraded 4500s isn't working anymore. I do run the logbackup script weekly (past experience has taught me to do this), and try and keep up with any patches or package updates, etc.
If anyone has seen something similar or can suggest anything, I'd appreciate it. I think I am going to have to open a case on this. Thanks - chrisMichel,
Indeed, it looks like that is the problem. I guess I was focused in on CW rather than the whole picture. But yes, indeed, if I walk the mac table for a vlan on a 4500 that has not been upgraded it works. If I do the same on an upgraded one, I get nothing.
The cautious optimism is that we do have a sup6 at our DR location that is running 12.2.53-sg1 and this test works on that switch. So as long as that
version isn't deferred, we'll test that on one of the older sups to verify.
So thanks for the help, I appreciate it - chris -
Tasklist.exe does not list all Modules in Windows 7 64-bit
tasklist.exe does not list all Modules in Windows 7 64-bit.
If I want to look at the DLLs loaded by Excel, I would type:
tasklist /M /fi "imagename eq excel.exe"
When I run this in XP or 32-bit Win7, it works fine, showing all the dlls loaded by excel. However, in 64-bit windows, it does NOT show all dlls - only a limited subset. If I use Process Explorer, I can still see all the DLLs loaded by excel,
but that is useless for writing automated scripts.
To check this out, try looking for kernel32.dll - it is always loaded by Excel, but tasklist does not display it in 64-bit Win7:
tasklist /M kernel32.dll /fi "imagename eq excel.exe"
So, since tasklist is broken, is there a good (command-line) way of looking at what dlls are loaded by a process?
(Originally posted
here)Have a look at ListDLLs, also from SysInternals.
http://technet.microsoft.com/en-us/sysinternals/bb896656
Example with Firefox
Microsoft Windows [Version 6.2.7989]
Copyright (c) 2011 Microsoft Corporation. All rights reserved.
C:\Users\Cyclops>cd downloads
C:\Users\Cyclops\Downloads>cd ListDlls
C:\Users\Cyclops\Downloads\ListDlls>listdlls firefox
ListDLLs v3.0 - DLL lister for Win9x/NT
Copyright (C) 1997-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
firefox.exe pid: 3544
Command line: "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
Base Size Version Path
0x0000000000c60000 0xe0000 5.0.0.4183 C:\Program Files (x86)\Mozilla Firef
ox\firefox.exe
0x000000002a960000 0x1a9000 6.2.7989.0 C:\Windows\SYSTEM32\ntdll.dll
0x0000000077a30000 0x43000 6.2.7989.0 C:\Windows\SYSTEM32\wow64.dll
0x00000000779c0000 0x57000 6.2.7989.0 C:\Windows\system32\wow64win.dll
0x0000000077a20000 0x8000 6.2.7989.0 C:\Windows\system32\wow64cpu.dll
0x0000000000c60000 0xe0000 5.0.0.4183 C:\Program Files (x86)\Mozilla Firef
ox\firefox.exe
0x0000000077a80000 0x180000 6.2.7989.0 C:\Windows\SysWOW64\ntdll.dll
0x0000000075860000 0x120000 6.2.7989.0 C:\Windows\SysWOW64\KERNEL32.DLL
0x0000000076060000 0x98000 6.2.7989.0 C:\Windows\SysWOW64\KERNELBASE.dll
0x0000000075480000 0x68000 6.2.7989.0 C:\Windows\SysWOW64\apphelp.dll
0x0000000071330000 0xdcf000 5.0.0.4183 C:\Program Files (x86)\Mozilla Firef
ox\xul.dll
0x0000000071320000 0x7000 5.0.0.4183 C:\Program Files (x86)\Mozilla Firef
ox\xpcom.dll
0x0000000071310000 0x6000 5.0.0.4183 C:\Program Files (x86)\Mozilla Firef
ox\mozalloc.dll
0x00000000712d0000 0x31000 4.8.8.0 C:\Program Files (x86)\Mozilla Firefox\
nspr4.dll
0x00000000712c0000 0x7000 4.8.8.0 C:\Program Files (x86)\Mozilla Firefox\
plc4.dll
0x0000000076370000 0x150000 6.2.7989.0 C:\Windows\SysWOW64\USER32.dll
0x0000000075630000 0x7000 6.2.7989.0 C:\Windows\SysWOW64\VERSION.dll
0x0000000071210000 0xaf000 8.0.0.0 C:\Program Files (x86)\Mozilla Firefox\
MOZCRT19.dll
0x0000000071150000 0xbe000 3.7.5.0 C:\Program Files (x86)\Mozilla Firefox\
mozsqlite3.dll
0x0000000070f80000 0x1c2000 C:\Program Files (x86)\Mozilla F
irefox\mozjs.dll
0x0000000070f60000 0x18000 3.12.9.0 C:\Program Files (x86)\Mozilla Firefox
\smime3.dll
0x0000000070f30000 0x21000 3.12.9.0 C:\Program Files (x86)\Mozilla Firefox
\ssl3.dll
0x0000000070e90000 0x9d000 3.12.9.0 C:\Program Files (x86)\Mozilla Firefox
\nss3.dll
0x0000000070e70000 0x14000 3.12.9.0 C:\Program Files (x86)\Mozilla Firefox
\nssutil3.dll
0x0000000070e60000 0x7000 4.8.8.0 C:\Program Files (x86)\Mozilla Firefox\
plds4.dll
0x0000000075fd0000 0x90000 6.2.7989.0 C:\Windows\SysWOW64\GDI32.dll
0x0000000075180000 0x1d000 6.2.7989.0 C:\Windows\SysWOW64\WINMM.dll
0x0000000075050000 0x7000 6.2.7989.0 C:\Windows\SysWOW64\WSOCK32.dll
0x0000000077920000 0x9e000 6.2.7989.0 C:\Windows\SysWOW64\ADVAPI32.dll
0x0000000076790000 0xd99000 6.2.7989.0 C:\Windows\SysWOW64\SHELL32.dll
0x0000000075ee0000 0xe7000 6.2.7989.0 C:\Windows\SysWOW64\ole32.dll
0x00000000755d0000 0x51000 6.2.7989.0 C:\Windows\SysWOW64\WINSPOOL.DRV
0x0000000076630000 0x78000 6.2.7989.0 C:\Windows\SysWOW64\COMDLG32.dll
0x00000000765d0000 0x60000 6.2.7989.0 C:\Windows\SysWOW64\IMM32.dll
0x0000000074170000 0x5000 6.2.7989.0 C:\Windows\SysWOW64\MSIMG32.dll
0x0000000076100000 0x63000 6.2.7989.0 C:\Windows\SysWOW64\SHLWAPI.dll
0x00000000777b0000 0x5000 6.2.7989.0 C:\Windows\SysWOW64\PSAPI.DLL
0x0000000075e90000 0x45000 6.2.7989.0 C:\Windows\SysWOW64\WS2_32.dll
0x00000000766b0000 0xaa000 1.626.7989.0 C:\Windows\SysWOW64\USP10.dll
0x0000000075a60000 0x88000 6.2.7989.0 C:\Windows\SysWOW64\OLEAUT32.dll
0x0000000070db0000 0xaf000 8.0.0.0 C:\Program Files (x86)\Mozilla Firefox\
MOZCPP19.dll
0x0000000076520000 0xaf000 7.0.7989.0 C:\Windows\SysWOW64\msvcrt.dll
0x00000000764e0000 0xa000 6.2.7989.0 C:\Windows\SysWOW64\LPK.dll
0x00000000750d0000 0x1d000 6.2.7989.0 C:\Windows\SysWOW64\WINMMBASE.dll
0x0000000076760000 0x2b000 6.2.7989.0 C:\Windows\SysWOW64\sechost.dll
0x0000000076170000 0xf0000 6.2.7989.0 C:\Windows\SysWOW64\RPCRT4.dll
0x0000000075af0000 0x100000 6.2.7989.0 C:\Windows\SysWOW64\combase.dll
0x00000000744d0000 0x1b4000 6.10.7989.0 C:\Windows\WinSxS\x86_microsoft.win
dows.common-controls_6595b64144ccf1df_6.0.7989.0_none_20f19b7e40a076fb\COMCTL32.
dll
0x00000000776c0000 0xd4000 6.2.7989.0 C:\Windows\SysWOW64\MSCTF.dll
0x00000000777a0000 0x6000 6.2.7989.0 C:\Windows\SysWOW64\NSI.dll
0x0000000075650000 0x60000 6.2.7989.0 C:\Windows\SysWOW64\SspiCli.dll
0x0000000075640000 0xc000 6.2.7989.0 C:\Windows\SysWOW64\CRYPTBASE.dll
0x00000000751a0000 0xc0000 6.2.7989.0 C:\Windows\SysWOW64\uxtheme.dll
0x0000000075110000 0x13000 6.2.7989.0 C:\Windows\SysWOW64\dwmapi.dll
0x0000000070c90000 0x11e000 6.2.7989.0 C:\Windows\SysWOW64\dwrite.dll
0x0000000070b70000 0x112000 6.2.7989.0 C:\Windows\SysWOW64\dbghelp.dll
0x00000000756b0000 0x1ac000 6.2.7989.0 C:\Windows\SysWOW64\SETUPAPI.dll
0x0000000075a20000 0x32000 6.2.7989.0 C:\Windows\SysWOW64\CFGMGR32.dll
0x0000000075980000 0x12000 6.2.7989.0 C:\Windows\SysWOW64\DEVOBJ.dll
0x00000000759b0000 0x6d000 2001.12.8919.0 C:\Windows\SysWOW64\clbcatq.dll
0x0000000072b60000 0x12a000 7.0.7989.0 C:\Windows\SysWOW64\propsys.dll
0x00000000755a0000 0x21000 6.2.7989.0 C:\Windows\SysWOW64\ntmarta.dll
0x0000000075d20000 0x43000 6.2.7989.0 C:\Windows\SysWOW64\WLDAP32.dll
0x0000000075080000 0x1a000 6.2.7989.0 C:\Windows\SysWOW64\iphlpapi.dll
0x0000000075060000 0x7000 6.2.7989.0 C:\Windows\SysWOW64\WINNSI.DLL
0x0000000010000000 0x51000 1.0.118.0 C:\Program Files (x86)\Common Files\P
C Tools\Lsp\PCTLsp.dll
0x0000000073490000 0x46000 6.2.7989.0 C:\Windows\SysWOW64\mswsock.dll
0x0000000072a30000 0x5000 6.2.7989.0 C:\Windows\SysWOW64\wshtcpip.dll
0x0000000070b40000 0x21000 5.0.0.4183 C:\Program Files (x86)\Mozilla Firef
ox\components\browsercomps.dll
0x00000000764f0000 0x30000 6.2.7989.0 C:\Windows\SysWOW64\WINTRUST.dll
0x0000000076260000 0x110000 6.2.7989.0 C:\Windows\SysWOW64\CRYPT32.dll
0x0000000075e00000 0xc000 6.2.7989.0 C:\Windows\SysWOW64\MSASN1.dll
0x0000000070b10000 0x27000 6.2.7989.0 C:\Windows\SysWOW64\d3d10_1.dll
0x0000000070ad0000 0x3c000 6.2.7989.0 C:\Windows\SysWOW64\d3d10_1core.dll
0x0000000070a80000 0x42000 6.2.7989.0 C:\Windows\SysWOW64\dxgi.dll
0x0000000070910000 0x16a000 6.2.7989.0 C:\Windows\SysWOW64\d3d11.dll
0x00000000708f0000 0x1d000 6.2.7989.0 C:\Windows\SysWOW64\t2embed.dll
0x00000000725a0000 0x103000 6.2.7989.0 C:\Windows\SysWOW64\WindowsCodecs.dl
l
0x00000000750c0000 0xb000 6.2.7989.0 C:\Windows\SysWOW64\profapi.dll
0x0000000072560000 0x32000 6.2.7989.0 C:\Windows\SysWOW64\EhStorShell.dll
0x0000000074fb0000 0xd000 6.2.7989.0 C:\Windows\SysWOW64\WTSAPI32.dll
0x0000000072540000 0x1b000 6.2.7989.0 C:\Windows\SysWOW64\POWRPROF.dll
0x0000000072510000 0x23000 6.2.7989.0 C:\Windows\SysWOW64\POWRBASE.dll
0x0000000072490000 0x74000 6.2.7989.0 C:\Windows\SysWOW64\ntshrui.dll
0x0000000074ca0000 0x17000 6.2.7989.0 C:\Windows\SysWOW64\CRYPTSP.dll
0x0000000074c60000 0x3b000 6.2.7989.0 C:\Windows\SysWOW64\rsaenh.dll
0x00000000748f0000 0xf000 6.2.7989.0 C:\Windows\SysWOW64\napinsp.dll
0x00000000734f0000 0x13000 6.2.7989.0 C:\Windows\SysWOW64\pnrpnsp.dll
0x00000000734e0000 0xf000 6.2.7989.0 C:\Windows\SysWOW64\NLAapi.dll
0x0000000074a60000 0x61000 6.2.7989.0 C:\Windows\SysWOW64\DNSAPI.dll
0x0000000073480000 0x8000 6.2.7989.0 C:\Windows\SysWOW64\winrnr.dll
0x0000000072310000 0x7b000 6.2.7989.0 C:\Windows\SysWOW64\mscms.dll
0x0000000075130000 0xf000 6.2.7989.0 C:\Windows\SysWOW64\USERENV.dll
0x00000000722d0000 0x3a000 6.2.7989.0 C:\Windows\SysWOW64\icm32.dll
0x00000000708b0000 0x3f000 C:\Program Files (x86)\NVIDIA Co
rporation\3D Vision\Nv3DVStreaming.dll
0x0000000072dd0000 0xa3000 9.0.30729.5491 C:\Windows\WinSxS\x86_microsoft.
vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.5491_none_50964dbabcb53b28\MSVCR90.dll
0x0000000070650000 0x25d000 8.17.12.7533 C:\Windows\SysWOW64\nvapi.dll
0x00000000703c0000 0x28c000 6.2.7989.0 C:\Windows\SysWOW64\explorerframe.dl
l
0x0000000070370000 0x4f000 6.2.7989.0 C:\Windows\SysWOW64\DUser.dll
0x0000000070260000 0x109000 6.2.7989.0 C:\Windows\SysWOW64\DUI70.dll
0x0000000072a20000 0x5000 6.2.7989.0 C:\Windows\SysWOW64\wship6.dll
0x0000000070230000 0x27000 3.12.9.0 C:\Program Files (x86)\Mozilla Firefox
\softokn3.dll
0x0000000070210000 0x18000 3.12.9.0 C:\Program Files (x86)\Mozilla Firefox
\nssdbm3.dll
0x00000000701c0000 0x44000 3.12.9.0 C:\Program Files (x86)\Mozilla Firefox
\freebl3.dll
0x0000000070160000 0x52000 1.81.0.0 C:\Program Files (x86)\Mozilla Firefox
\nssckbi.dll
0x0000000073430000 0x6000 6.2.7989.0 C:\Windows\SysWOW64\rasadhlp.dll
0x0000000073440000 0x3b000 6.2.7989.0 C:\Windows\SysWOW64\fwpuclnt.dll
0x0000000070150000 0xb000 6.2.7989.0 C:\Windows\SysWOW64\feclient.dll
0x000000006fdf0000 0x1e8000 6.2.7989.0 C:\Windows\SysWOW64\d3d9.dll
0x000000006f270000 0xb7f000 8.17.12.7533 C:\Windows\SysWOW64\nvd3dum.dll
0x0000000009a50000 0x28000 7.17.12.7533 C:\Program Files (x86)\NVIDIA Corp
oration\3D Vision\nvStereoApiI.dll
0x000000000b920000 0x93000 7.17.12.7533 C:\Program Files (x86)\NVIDIA Corp
oration\3D Vision\nvSCPAPI.dll
0x0000000070080000 0x30000 6.2.7989.0 C:\Windows\SysWOW64\shdocvw.dll
0x0000000070070000 0x8000 6.2.7989.0 C:\Windows\SysWOW64\LINKINFO.dll
0x0000000070050000 0x1a000 6.2.7989.0 C:\Windows\SysWOW64\srvcli.dll
0x0000000070040000 0xb000 6.2.7989.0 C:\Windows\SysWOW64\cscapi.dll
0x0000000070000000 0x1a000 6.2.7989.0 C:\Windows\SysWOW64\thumbcache.dll
0x0000000075bf0000 0x12c000 9.0.7989.0 C:\Windows\SysWOW64\urlmon.dll
0x0000000077530000 0x182000 9.0.7989.0 C:\Windows\SysWOW64\iertutil.dll
0x00000000777c0000 0x160000 9.0.7989.0 C:\Windows\SysWOW64\WININET.dll
0x00000000764c0000 0x1d000 6.2.7989.0 C:\Windows\SysWOW64\bcrypt.dll
0x00000000759a0000 0x3000 6.2.7989.0 C:\Windows\SysWOW64\Normaliz.dll
0x0000000072b50000 0x8000 6.2.7989.0 C:\Windows\SysWOW64\Secur32.dll
0x0000000074b20000 0x5b000 6.2.7989.0 C:\Windows\SysWOW64\winhttp.dll
0x0000000074ad0000 0x4e000 6.2.7989.0 C:\Windows\SysWOW64\webio.dll
0x0000000072950000 0x4f000 6.2.7989.0 C:\Windows\SysWOW64\RASAPI32.dll
0x0000000072930000 0x14000 6.2.7989.0 C:\Windows\SysWOW64\rasman.dll
0x0000000072920000 0xc000 6.2.7989.0 C:\Windows\SysWOW64\rtutils.dll
0x0000000072910000 0x6000 6.2.7989.0 C:\Windows\SysWOW64\sensapi.dll
0x000000006e780000 0x4d000 1.0.0.1 C:\Windows\SysWOW64\Wpc.dll
0x000000006e730000 0x45000 6.2.7989.0 C:\Windows\SysWOW64\wevtapi.dll
0x0000000075170000 0xf000 6.2.7989.0 C:\Windows\SysWOW64\samcli.dll
0x000000006e710000 0x11000 6.2.7989.0 C:\Windows\SysWOW64\SAMLIB.dll
0x000000006e700000 0x9000 6.2.7989.0 C:\Windows\SysWOW64\netutils.dll
0x000000006e690000 0xf000 6.2.7989.0 C:\Program Files (x86)\Windows Defen
der\MpOav.dll
C:\Users\Cyclops\Downloads\ListDlls>
Comparison with Tasklist
Microsoft Windows [Version 6.2.7989]
Copyright (c) 2011 Microsoft Corporation. All rights reserved.
C:\Users\Cyclops>tasklist /m /fi "imagename eq firefox.exe"
Image Name PID Modules
========================= ======== ============================================
firefox.exe 3544 ntdll.dll, wow64.dll, wow64win.dll,
wow64cpu.dll
C:\Users\Cyclops> -
My tracks are not listed in order
my tracks are not listed in the correct order in the library and on my ipod they r playing out of order.
I really don't mean to dodge your question and take this thread in another direction, but I still would like to point out, in case you might not have realized, that iTunes now has gapless playback. That said, it really caps the usefulness of the Join CD Tracks feature. I understand that there may still be good reasons for using this, like if you have an older iPod that doesn't support gapless playback or a non-Apple portable player, etc. Still, I think it's worth mentioning that in the future, as your equipment changes and you can take advantage of proper gapless playback, you may find it annoying that you can't unjoin the tracks in a precise manner.
Join CD Tracks Command Is Dimmed
Joining CD Tracks
Adding songs from CDs to your library
Interestingly, the iTunes 7.x-related documentation says nothing about having to select contiguous tracks in order to use the Join CD Tracks command. I don't use this feature anymore since iTunes and iPod have gapless playback, but if I find that the old rules still apply, I will submit a request to update the newer KB articles. -
iTunes Match does not list all the music I had on my iphone. Not on my phone or iTunes. Only shows the music I've purchased from itunes and none of my 400+ songs. Please help. Thank you.
Is your music in your iTunes library on your computer and has match completed its scan of this library.
jim -
Application Archive not listing all applications
Regarding the packaged application APEX Application Archive, does anyone know why it does not list all applications under Applications tab? I have it installed for three mostly identical instances, and two out of three are missing listing of applications that could be archived. I did not notice that all my applications were not archived the first time I used it. Is there a setting I am missing on the application level that makes an application "archivable"?
TIA,
CarlSee this thread: http://discussions.apple.com/thread.jspa?messageID=7535811#7535811
-
Restore from time machine does not list all my backups. I know they exist but their dates are not present on the restore list. Any help appreciated. If I must use one of these older dates to restore, how do I then get the more current data off time machine?
Ok, so am i correct in saying that the steps to fix are as follows.
That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
It should, but sometimes people report that it fails. I'm not sure why that happens. -
My apple tv does not list all of my playlists. What to do?
my apple tv does not list all of my playlists. What to do?
What playlists are you referring to? Providing more info on the issue will help.
-
LMS 4.0.1 User Tracking Problem "No end hosts found"
Hi everybody,
I have problems with devices that do not appear in the user tracking utility.
These devices are a cisco WS-C4506-E with Supervisor II-Plus-10GE and two WS-C6509 with Supervisor Engine 720.
When I start acquisition for the devices I receive following message: "Device unreachable". When I try to watch the end hosts, I get following Message: "No end hosts found."
I have patched LMS 4.0.1 with CSCto06189 Patch.
Is there perhaps a solution?
Roman400 devices - do you mean 400 end users?
Do they all use a Layer 3 default gateway that is among your discovered and managed devices?
Have you followed the steps and troubleshooting from around page 24 of this guide? -
Mac does not list all folders in a SMB share
Hi guys, this is a bit of a weird one and I've tried everything I can think of.
In our house we have a media centre running Windows 7. It has several shares, one of which we'll call folder "X". Folder X opens correctly on the media centre, and any other Windows machine perfectly. Almost every other machine in the house is running OS X 10.6, and one of my housemates today noted that some of the folders inside of folder X were not listed on a Mac. So far we've tested it on 2 Macs and 2 Windows machines, and everytime the Windows machine lists all folders inside of X, where the Mac does not. The weird thing is, it's cutting them out alphabetically, so it's basically from D through to I that are missing, all in all there are 30 (out of 160) folders missing inside of Folder X...here's what I've tried.
On the Windows 7 machine:
-Restarted server service
-Removed Share X and re-added
-Checked share permissions on folder X
-Checked permissions on folder X, propagated to all child folders just in case.
-Restarted machine after every change.
On the Macs we haven't really tried much as there's not much we can think to change. We've tried Finder, Path Finder (which I'm guessing will be exactly the same), restarting, removing from workgroup and re-adding...I can't think what would cause such a weird problem.
To make things harder we don't know exactly when it started happening but the OSX machines definitely used to list the folders and it happens on more than one mac. which I guess makes me think it's something on the Windows client. The 30 folders are not using any nonstandard characters, some are only a few letters long.
Ideas on a postcard!?Reporting the same problem.
1. Have Windows 7 MediaCenter with file sharing set up properly (LM+NTLM Authentication allowed and 128-bit encryption disabled in security policies).
2. Test folder ("C:\income") and all the subfolders' owner is 'Guest', full access is granted for everyone.
3. Connecting to MediaCenter from MacBook with Finder by pressing Cmd+K and typing smb://ip-addr/income
4. Finder connects successfully, but some sub-folders and files are not being listed.
Workaround:
5. You can open a not-listed folder directly by pressing Cmd+K and typing smb://ip-addr/income/some-invisible-folder
6. Voila! You're inside invisible folder.
In the meantime, i can see all the sub-folders on a Windows XP client machine, so i can make a conclusion that all of these 'invisible' sub-folders are actually accessible by Finder, but in some reason are just not being listed on Mac. -
Campus manager user tracking problem
Hi We are using LMS 3.0.1 and the campus manager verson is 5.0.2. We have two subnet which are used for the management ip of switch kept in two different geographical areas. I have made the entry of all devices kept in both subnets and all the devices are know device in DCR, RME and DFM. also after data collection the devices are shown in campus manager database. But I am not able to learn the end host details of the hosts connected to one of our segment.
even if the perticular subnet is not appearing in "campus user tracking" as well as the devices belongs to the subnet. but I am getting all end host details from the second subnet.
please help.Hi clarke,
i have updated the cm to the latest but still it did not learn. Later i added the 10.188.7.x ip addresses manually in the discovery settings instead of " *.*.*.* " - ip range. Now i am able to see these devices in topology view > layer 2 veiw as connected devices & not seen in unconnected..
Now i need to see the hostname, ip address etc details of these segments in UT acquisition window.... Secondly in topology view, the core switch is showing in "?" question mark symbol. This device is WS-C6509-E (sup-bootdisk:s72033-ipbase-mz.122-33.SXH3a.bin). I tried to delete this device from common services and added it again, there i selected "ws-c6509", i did not see the " ws-c6509-E".
in Cisco site, the serial number of the device is showing as the device "VS-C6509E-S720-10G"
Can u pls help me on this..
regards
rajesh -
ITunes 5 Does not list all Mp3's/AAC's in the library
I've Cleared the library and reloaded it. there are still Mp3's/AAC's in the file folders that are not listed in the itunes library. i.e. 3 of 20 will show. How can I fix this?
A song's "kind" will only be "matched AAC file" after the original track has been deleted from the iTunes library and the "matched" track then downloaded to the iTunes library.
You also might find these already existing threads informative.
https://discussions.apple.com/search.jspa?resultTypes=&dateRange=all&peopleEnabl ed=true&q=Partial+album+match&containerType=14&container=2882&username=&rankBy=r elevance&numResults=15 -
User tracking problem - lms 3.2
Noticed a pretty weird one. LMS 3.2 on windows 2008.
Everything had been running normally. A while back we noticed the user tracking
tables diminishing, and found out it was due to a bug in the code we were running
on our 4500s. So we started an upgrade cycle and the tables started growing again.
UT runs fine, but there is nothing newer than Feb 25th. Even if I do a manual UT discovery
it seems to run fine, but there are no new entries in the table, or rather nothing with the
last seen date of today when I just ran it.
I did do the usual, run the logBackup script, clean some other log files, I even rebooted
the server, but it still doesn't update with any new UT entries. I have checked and can
do snmpwalks per vlan on the cam tables, so I don't believe it's anything with the switches,
I think this is something within UT or campus.
I would be happy to send up any log files that might be useful. Thanks - chrisGaganjeet,
that's interesting (and frustrating). In the screenshot I sent yesterday, the UT count is 12500. We should be well over 13000 end hosts.
In doing a search through the UT.log, one of the IPs that is not showing up when I search user tracking is:
2011/03/28 10:02:06 EvalTask-vmpsadmin-05 VmpsAdminSMFGetIpXlateTable: router=10.255.3.130 ip=10.242.9.15
mac=00-19-99-91-a1-14 subnet=10.242.9.0 mask=255.255.255.0 vtp=PETERSACC_10.255.3.130(T) vlan=PETERS-C-USER-1
vlan Index=1709
It is clearly in the logfile. But if you refer to the attached screenshot titled peters-ut-screenshot, if I search on just 10.242, I get
"no end hosts found". This site was brought online a couple weeks ago.
The second screenshot, titled PACS-subnet, shows no end hosts found. This is due to the SW bug we found in 12.2.50-sg8 and
the entries already having been purged. This switch was upgraded to 12.2.53-sg3 on March 14th so the entries should be showing
up. I have not searched ut.log for this subnet. The bug we found with 12.2.50-sg8 was that an snmpwalk of the mac tables, per vlan,
returned nothing. With 12.2.53-sg3, an snmpwalk of the mac tables per vlan does return the mac tables per vlan.
The third screenshot is just searching on 10.255, which covers our datacenter. While there are a lot of entries, the "last seen" date
is Feb 25th. As these servers are always on, I would expect to see the last seen date as yesterday when the last ut run was executed.
I have not searched ut.log for any of these entries.
So it does indeed appear that the ut discovery finds the end hosts. But when you pull up the user tracking utility to search, there is nothing newer
than February 25th. I hope this helps.
Thanks again for the help, I appreciate it - chris -
Mathscript Probe Window (LV 2009) Not listing all variables
Please see the screenshot below. The Mathscript probe window is shown on the right of the VI block diagram. The execution is at the breakpoint on the last line (blue arrow).
Why is input variable "a" not listed in the probe window? I see this behavior that some variables are not listed in the probe window.
Thanks,
AJHi AJ,
There are a couple of things that may be going on when variables fail to appear in the MathScript Probe. The first is a bug with the MathScript Probe in 2009. Sometimes input variables either fail to appear or briefly appear then immediately disappear. The good news is that this bug (CAR #182784) is scheduled to be fixed in the next service pack release of LabVIEW. I'm not sure if Nickerbocker's workaround will work. If it doesn't, you could also try adding "a = a+0;" to the top of your script.
Another occasion where variables will fail to appear is if they are defined within your script but never used. This case is analagous to placing a constant on a LabVIEW block diagram and not wiring it to anything. In this situation, there is no wire to probe; the only way to see the value at run-time is to look at the code itself. It's a similar situation when you define a variable in MathScript without using it; the MathScript Probe cannot report the variable because it doesn't have a corresponding "wire" so you have to look at your MathScript node to see the value.
Please let us know if you notice missing variables in situations other than the above two cases.
Thanks,
jattas
LabVIEW MathScript R&D
Maybe you are looking for
-
Install newest JRE on Solaris 9 Sparc (64-bit)
Note: This message has also been posted on the JRE forum. This is the second attempt to post it here. I would like to know the best method to replace the JRE that is installed with a Solaris 9 (SPARC) installation. A clean installation of Solaris 9 c
-
Function Modules for Extractors
Hi, how to find the existing Function Modules in Extractors. i am using FM like RSAX_BIW_GET_DATA_SIMPLE. please help me out to list all Function Modules. thanks in advance mageshbabu
-
Just got T61...some questions on finger/hand print
I have been a loyal customer for Dell number of years. But, I have been sick of their poor build quality. For example, I have seen that a part of the palm rest area of my current laptop (Inspiron 6000) was completely peeled off (I can see beige color
-
Adobe Premiere Elements Won't Start A New Project?
When I open up Premiere Elements and try to start a new project, all it shows is a black and purple line, then it just stops. I have already tried updating QuickTime, Windows 7, Nvidia Drivers, and Uninstalling and then Reinstalling Premiere elements
-
Delete a template in pages also how to delete a page if you have more than one
Hi how do you delete a template from pages,also if you have more than one page and you only want one how do you delete the other page.