CiscoWorks 3.1 RME devices hung in pending state

I added over 4800 devices to my new instance of CiscoWorks LMS 3.1 using the dcrcli tool and a about 75% of them are stuck in the RME pending state. About 900 of them have moved to the normal state and inventory and config archive collection has been successful on them. 3950 have not moved from the pending state and when I click pending no devices show up. They also show as failed under the inventory collection state. I am new to CW so any help would be apreciated.
Thanks!

Is LMS integrated with ACS?

Similar Messages

ISE Using my device Portal , devices still in pending registration status

Abstract:
I'm on ISE 1.2 patch 8.
We want give access wireless to devices mobile using 802.1x with Active Directory. The condition is that he previously the user must register mobile device in "my device portal"
-The corporate user connected from the LAN network, login in "my device portal" using their active directory account and register your device.
-The policy defined in ISE indicates that 802.1x users in a group of AD and over condition "RegistredDevices" can access to the network (see screen 1)
-Users access the wireless network from your mobile device by entering its name from AD and finally accesses the network.
-From my "devices portal" devices always shows “Pending” status. All works as expected except for this situation.
Can you please help?
Regards,
Marco Muñoz

It looks like you dont have any provisioning profiles configured.
Under Admin settings make sure client provisioning is enabled. Try to set native supplicant provisioning policy unavailable: to Allow Network Access.

LMS 3.2 RME Device Update failed

Hello experts,
I got a new error on my LMS 3.2 with RME 4.3.1
I can´t install any of the RME Device updates.
e.g. : "Installation failed for product [Resource Manager Essentials] with message : com.cisco.nm.xms.psu.packagemgmt.InstallerException: Repository in use. Another Package Support Updater client session may be modifying device support."
I looked up for a .lock file in my CW dir but there is no one.
NMSROOT/Psu.Lock and NMSROOT/www/classpath/com/cisco/nm/xms/psu/Psu.Lock does not exist.
There are no other .lock files in the CW dir and subdirs.
I attatched a psu.log file. Maybe u will see the failure.
What I tried:
- Restart daemon
- install from cisco.com
- install from local dir
... everytime the package installation failed.
Bye,
Patrick

You will need an identical server (RME 4.3.1) with an updated/healthy package repository. If you have that, you can follow these steps to regenerate maps:
1. Shutdown daemons:
net stop crmdmgtd
2. On the bad server, delete all .zip files under the two RME package repositories:
NMSROOT\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\pkgs
3. Copy all of the packages under one of the above locations on the good server to both of these locations on the bad server.
4. Delete your bad rme*.map files under NMSROOT/www/classpath/com/cisco/nm/xms/psu/maps/ and replace them with the good ones.
5. Restart daemons:
net start crmdmgtd

Error PENDING state, err(0) installing clusterware 10.2.0.4

Hi,
I'm installing oracle clusterware 10.2.0.4 in Windows server 2008, when finish setting up proccess, It run some configuration, the first config failed(Oracle Clusterware Configuration Assistant).
the error is :
Step 5: Starting up CRS stack on all nodes
sdf01 service OracleCSService in improper PENDING state, err(0)
sdf02 service OracleCSService in improper PENDING state, err(0)
we can not use the 11g version because the ERP is not yet certified for this release.
the servers 2008 are virtual machine built on vmware.
the shared storage is external via SAN
My configuration is :
1. Clusterware 10.2.0.4
2. 2 nodes windows 2008R2 x 64
3. shared storage is raw partitions from SAN :
Volume ### Ltr Label Fs Type Size Status Info
Volume 0 D DVD-ROM 0 B No Media
Volume 1 C NTFS Partition 60 GB Healthy System
Volume 2 E New Volume NTFS Partition 180 GB Healthy Pagefile
Volume 3 RAW Partition 400 GB Healthy
Volume 4 RAW Partition 300 MB Healthy --- For ocr primary
Volume 5 RAW Partition 300 MB Healthy --- For voting disk ( copy 1 )
Volume 6 RAW Partition 300 MB Healthy --- For ocr mirror
Volume 7 RAW Partition 300 MB Healthy --- For voting disk ( copy 2 )
Volume 8 RAW Partition 300 MB Healthy --- For voting disk ( copy 3 )
Volume 9 RAW Partition 300 MB Healthy
Volume 10 RAW Partition 300 MB Healthy
Volume 11 RAW Partition 300 MB Healthy
Volume 12 RAW Partition 300 MB Healthy
Volume 13 RAW Partition 97 GB Healthy
4. firewall off in node1 and node2
5. My host files is
127.0.0.1 localhost
192.168.13.106 SDF01
192.168.13.107 SDF02
172.16.16.2 SDF01-PRIV
172.16.16.3 SDF02-PRIV
192.168.13.114 SDF01-VIRT
192.168.13.115 SDF02-VIRT
6. the execution runcluvfy.bat is ok for all items ( except for VIP address )
7. ocssd.log is :
[    CSSD]2012-11-30 16:14:25.247 [2648] >TRACE: clssnmReadNodeInfo: added node 1 (sdf01) to cluster
[    CSSD]2012-11-30 16:14:25.278 [2648] >TRACE: clssnmReadNodeInfo: added node 2 (sdf02) to cluster
[    CSSD]2012-11-30 16:14:25.294 [2776] >TRACE: clssnm_skgxninit: Compatible vendor clusterware not in use
[    CSSD]2012-11-30 16:14:25.294 [2776] >TRACE: clssnm_skgxnmon: skgxn init failed
[    CSSD]2012-11-30 16:14:25.294 [2648] >TRACE: clssnmNMInitialize: misscount set to (60)
[    CSSD]2012-11-30 16:14:25.310 [2648] >TRACE: clssnmNMInitialize: Network heartbeat thresholds are: impending reconfig 30000 ms, reconfig start (misscount) 60000 ms
[    CSSD]2012-11-30 16:14:25.325 [2648] >TRACE: clssnmDiskStateChange: state from 1 to 2 disk (0/\\.\votedsk1)
[    CSSD]2012-11-30 16:14:25.325 [2296] >TRACE: clssnmvDPT: spawned for disk 0 (\\.\votedsk1)
[    CSSD]2012-11-30 16:14:27.338 [2296] >TRACE: clssnmDiskStateChange: state from 2 to 4 disk (0/\\.\votedsk1)
[    CSSD]2012-11-30 16:14:27.338 [2648] >TRACE: clssscSclsFatal: read value of disable
[    CSSD]2012-11-30 16:14:27.338 [2672] >TRACE: clssnmvKillBlockThread: spawned for disk 0 (\\.\votedsk1) initial sleep interval (1000)ms
[    CSSD]2012-11-30 16:14:27.338 [2648] >TRACE: clssscSclsFatal: read value of disable
[    CSSD]2012-11-30 16:14:27.338 [2820] >TRACE: clssnmFatalThread: spawned
[    CSSD]2012-11-30 16:14:27.338 [3004] >TRACE: clssnmClusterListener: Listening on (ADDRESS=(PROTOCOL=tcp)(HOST=sdf01-priv)(PORT=49895))
[    CSSD]2012-11-30 16:14:27.338 [3004] >TRACE: clssnmClusterListener: Probing node sdf02 (2), probcon(00000000042CF410)
[    CSSD]2012-11-30 16:14:27.338 [2112] >TRACE: clssgmclientlsnr: listening on (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=61101))
[    CSSD]2012-11-30 16:14:27.338 [1052] >TRACE: clssgmPeerListener: Listening on (ADDRESS=(PROTOCOL=tcp)(DEV=1208)(HOST=172.16.16.2)(PORT=49641))
[    CSSD]2012-11-30 16:14:27.369 [2296] >TRACE: clssnmReadDskHeartbeat: node(2) is down. rcfg(-1) wrtcnt(-1) LATS(19921561) Disk lastSeqNo(-1)
[    CSSD]2012-11-30 16:14:28.336 [3004] >TRACE: clsc_send_msg: (00000000042CEDF0) NS err (12571, 12560), transport (533, 57, 0)
[    CSSD]2012-11-30 16:14:28.336 [3004] >TRACE: clssnmDiscHelper: sdf02, node(2) connection failed, con (00000000042CF410), probe(00000000042CF410)
[    CSSD]2012-11-30 16:14:34.436 [2676] >TRACE: clssnmRcfgMgrThread: Local Join
[    CSSD]2012-11-30 16:17:50.138 [2676] >WARNING: clssnmLocalJoinEvent: takeover succ
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmDoSyncUpdate: Initiating sync 1
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmDoSyncUpdate: diskTimeout set to (57000)ms
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmSetupAckWait: Ack message type (11)
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmSetupAckWait: node(1) is ALIVE
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmSendSync: syncSeqNo(1)
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmWaitForAcks: Ack message type(11), ackCount(1)
[    CSSD]2012-11-30 16:17:50.138 [3004] >TRACE: clssnmHandleSync: diskTimeout set to (57000)ms
[    CSSD]2012-11-30 16:17:50.138 [3004] >TRACE: clssnmHandleSync: Acknowledging sync: src[1] srcName[sdf01] seq[1] sync[1]
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmWaitForAcks: done, msg type(11)
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmDoSyncUpdate: node(1) is transitioning from joining state to active state
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmSetupAckWait: Ack message type (13)
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmSetupAckWait: node(1) is ACTIVE
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmWaitForAcks: Ack message type(13), ackCount(1)
[    CSSD]2012-11-30 16:17:50.138 [3004] >TRACE: clssnmSendVoteInfo: node(1) syncSeqNo(1)
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmWaitForAcks: done, msg type(13)
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmCheckDskInfo: Checking disk info...
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmCheckDskInfo: diskTimeout set to (200000)ms
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmEvict: Start
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmWaitOnEvictions: Start
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmSetupAckWait: Ack message type (15)
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmSetupAckWait: node(1) is ACTIVE
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmSendUpdate: syncSeqNo(1)
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmWaitForAcks: Ack message type(15), ackCount(1)
[    CSSD]2012-11-30 16:17:50.138 [3004] >TRACE: clssnmUpdateNodeState: node 0, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
[    CSSD]2012-11-30 16:17:50.138 [3004] >TRACE: clssnmUpdateNodeState: node 1, state (2/3) unique (1354310065/1354310065) prevConuni(0) birth (1/1) (old/new)
[    CSSD]2012-11-30 16:17:50.138 [3004] >TRACE: clssnmUpdateNodeState: node 2, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
[    CSSD]2012-11-30 16:17:50.138 [3004] >USER: clssnmHandleUpdate: SYNC(1) from node(1) completed
[    CSSD]2012-11-30 16:17:50.138 [3004] >USER: clssnmHandleUpdate: NODE 1 (sdf01) IS ACTIVE MEMBER OF CLUSTER
[    CSSD]2012-11-30 16:17:50.138 [3004] >TRACE: clssnmHandleUpdate: diskTimeout set to (200000)ms
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmWaitForAcks: done, msg type(15)
[    CSSD]2012-11-30 16:17:50.138 [2676] >TRACE: clssnmDoSyncUpdate: Sync 1 complete!
[    CSSD]2012-11-30 16:17:50.153 [2296] >ERROR: clssnmvReadFatal: voting device corrupt (0xffffffff/0xffffffff/0/\\.\votedsk1)
[    CSSD]2012-11-30 16:17:50.231 [2648] >USER: NMEVENT_SUSPEND [00][00][00][00]
[    CSSD]2012-11-30 16:17:50.231 [2876] >TRACE: clssgmReconfigThread: started for reconfig (1)
[    CSSD]2012-11-30 16:17:50.231 [2876] >USER: NMEVENT_RECONFIG [00][00][00][02]
[    CSSD]2012-11-30 16:17:50.231 [2876] >TRACE: clssgmEstablishConnections: 1 nodes in cluster incarn 1
[    CSSD]2012-11-30 16:17:50.231 [1052] >TRACE: clssgmPeerListener: connects done (1/1)
[    CSSD]2012-11-30 16:17:50.231 [2876] >TRACE: clssgmEstablishMasterNode: MASTER for 1 is node(1) birth(1)
[    CSSD]2012-11-30 16:17:50.231 [2876] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
[    CSSD]2012-11-30 16:17:50.231 [2876] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
[    CSSD]2012-11-30 16:17:50.231 [2876] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
[    CSSD]CLSS-3000: reconfiguration successful, incarnation 1 with 1 nodes
[    CSSD]CLSS-3001: local node number 1, master node number 1
[    CSSD]2012-11-30 16:17:50.231 [2876] >TRACE: clssgmReconfigThread: completed for reconfig(1), with status(1)
[    CSSD]2012-11-30 16:19:22.599 [2540] >TRACE: clsc_send_msg: (000000000451EA10) NS err (12571, 12560), transport (533, 57, 0)
[    CSSD]2012-11-30 16:19:22.755 [2112] >WARNING: clssgmShutDown: Received explicit shutdown request from client.
[    CSSD]2012-11-30 16:19:22.755 [2112] >WARNING: clssgmClientShutdown: graceful shutdown completed.
I appreciate any help
thanks
Edited by: user531958 on 3/12/2012 12:09 PM

Hi
Please make sure your operating system for Oracle Version :
*1. Oracle Real Application Clusters 10.2.0.4.0 is not certified on Microsoft Windows x64 (64-bit) 2008 R2*
2. Oracle Real Application Clusters 10.2.0.4.0 is certified on Microsoft Windows x64 (64-bit) 2008
3. Oracle Real Application Clusters 10.2.0.4.0 is certified on Microsoft Windows (32-bit) 2008
Thanks
LaserSoft

Standby CM Hangs in pending state

I have a Standby CM running 4.0.9 that we just installed. Tried to upgrade it to 4.0.19 and it just sat there in pending state for a long time. It appeared to be hung because I couldn't get to it remotely any longer. Rebooted the box and set it up as an AA instead. The game plan was to get it upgraded, then convert it to a Standby CM. So now the box sit's, showing online via the CM as a Standby CM (even though it's set to AA) and it still sits there in pending state. How can I get this resolved? TIA

The Primary CM is running 4.0.19. I managed to blow it away in the Primary CM. Forced a CMS de-registration on the AA. Re-registered it as an AA and got the code upgraded to 4.0.19. (I did hit what I believe is a bug her which I will explain later). Now I need to change it's funtion to a Standby CM but I don't know if I can do this from the Primary CM.
So the bug I hit was that when the WAAS was rebooted to load the new code I lost connectivity for a long time. Check the switch that it was connected to and saw the interface was up/down. Bounced the interface on the WAAS and it came back. Fortunate for me the box is in our DC. Had this been remote I'm not sure a bounce of the switch interface would have worked. FYI - I have my interfaces on an etherchannel with the load-balancing set to ip-dst (round-robin didn't work).

Child CPs are always in PENDING STATE.

Procedure parent_cp (errbuf out nocopy varchar2, retcode out nocopy varchar2) IS
ret number;
i number;
BEGIN
fnd_msg_pub.initialize;
BEGIN ---Block A
req_data := fnd_conc_global.request_data;
if (req_data is not null) then
i := to_number(req_data);
if (i < 5 ) then
errbuf := 'Done!';
retcode := 0 ;
return;
end if;
else
i := 1;
end if;
for j in 1 .. 4 loop
vRequestId(j) := fnd_request.submit_request('CZ', 'Child','Delete Localized Text - Child Number : ' ||TO_CHAR(vChildNo), NULL,TRUE, vChildMdlRange);
fnd_conc_global.set_req_globals(conc_status => 'PAUSED', request_data => to_char(vChildNo)) ;
IF (vRequestId(j) = 0 ) THEN
errbuf := fnd_Message.get;
retcode := 2;
ELSE
errbuf := 'Sub-Request submitted!';
retcode := 0 ;
END IF;
END LOOP;
END;
BEGIN ---block B
For j in vRequestId.FIRST..vRequestId.LAST LOOP
fnd_file.put_line(fnd_file.log,' reuest' || vRequestId(j));
vrequeststatus := fnd_concurrent.get_request_status(vRequestId(j),
NULL,
NULL,
phase,
status,
dev_phase ,
dev_status ,
message );
WHILE (dev_phase != 'COMPLETE') LOOP
fnd_file.put_line(fnd_file.log,' while loop' || vRequestId(j));
vrequeststatus := fnd_concurrent.wait_for_request(vRequestId(j),
60,
10,
phase ,
status ,
dev_phase ,
dev_status ,
message );
END LOOP;
END LOOP;
dbms_output.put_line(' Block after submitting Child CP ');
END;
END parent_cp;
The above procedure was the Parent CP. Here the problem is in fnd_request.submit_request('CZ', 'Child','Delete Localized Text - Child Number : ' ||TO_CHAR(vChildNo), NULL,TRUE, vChildMdlRange); i have given sub_request as True and used fnd_conc_global.set_req_globals(conc_status => 'PAUSED', request_data => to_char(vChildNo)) ; to make parent CP to pause it.
It submits 4 child CPs as expected but the phase as INACTIVE and status NO MANAGER and PARENT CP was always in running state.
If i make sub_request parameter of fnd_request.sub_request to FALSE . It submits 4 child CPs as expected with the phase as PENDING and status NORMAL and PARENT CP was always in running state. But child cps are never changing the Phase to RUNNING. It is always in PENDING STATE.
Please suggest how to use fnd_conc_global.set_req_globals and fnd_concurrent.wait_for_request together.

Pl do not post duplicates - Parent Concurrent Program executes rest of the logic before PAUSED STATE.

LMS 3.2. Campus Manager (5.2.1) and some devices in "Not Managed" state

Hi:
I have enabled auto mode and manually included but when I run a data collection some devices don't take part in the process. When I click in show included devices I can see 13 devices in Not Managed state, include C2950G and C2960S . But 3 sets of C2950G can be managed . What is this? How can I fix it?
I attach ani.log file
Thanks

Try to remove the Auto-sync mode and try to add those 13 devices manually and run Data Collection and check if they get added.
-Thanks
Vinod

Databases in Recovery Pending state

Dear all,
Need your expertise to understand bit more.
Yesterday i came across databases in "Recovery Pending" state problem.
Followed too many recommendations form Google but to no avail.
e.g. http://dbamohsin.wordpress.com/2012/01/23/cannot-detach-a-suspect-or-recovery-pending-database/
Plucked some leafs from Paul Randal's articles as well http://www.sqlskills.com/blogs/paul/post/Search-Engine-QA-4-Using-EMERGENCY-mode-to-access-a-RECOVERY-PENDING-or-SUSPECT-database.aspx
But none of them could fixed my problem.
What i did:
I installed 2008 r2 on a machine (DEV) which already had 2008; yea instance name was different.
Had to restart the server so i did (yea, i gave all developers enough time but due to some reasons databases were in recovery pending mode).
After restart, some databases (not all) were in recovery pending state. Above links provided enough stuff to recover them but didnt work. For instance after setting database in Emergency mode, it stayed there for ages telling something like "Database is
being recovered, wait until recovery is finished".
How i fixed it:
I attached them onto the newly created 2008 r2 instance. Made them offline (on old instance) in case there is any access conflict. Didnt get any error, like files are in use or something, while attaching them (which raised an eyebrow).
Couple of things i noticed after new instance's installation:
While trying to reattach database on same old instance, I wasn't able to see the .mdf and .ldf files form there respective drives. But i was able to see from the new instance.
WHY?
Both sql server services (old and new) were using same service account. When i gave service account enough ntfs permissions on the drive i was able to see all .mdf and .ldf files.
Questions are:
1) Why it wasnt the case before? Important to note here: service accounts were local admins on the server.
(I think i am answering myself here...would love to get more insight on it).
2) Is it normal that i just have 2008r2 tools in Start>>Program. e.g. there is just 2008 r2 management studio not 2008 one etc.
Dont want to let this happen in production environment (i will have backups though), so is there any approach you guys are using to avoid it.
I hope i made myself clear here, or let me know.
Thanks in advance for any help.
Dinkar Chalotra

If you dont need your log file, you can:
Detach your database
Move the log file to other place
Attach back the database and from the file list, remove the ldf
SQL server will create a new log file and the database will be online again.
Escarcha

Batch is in pending state forever

HI i had submitted a batch control LTRPRT through "batch job submission" page ,i had checked the batch job table and found that it is in pending state,I waited for one day and again checked but it was still in pending state
1.what would be the reason?
2.where can i configure batch server?
3.what are essential settings for batch server?

What CC&B version are you on?
Pre OUAF 2.1 (until CC&B V2.0.5) , you needed the command based cron utility to be running - cdxCronBatch
Post OUAF 2.1, you still have Command based daemon called submitbatch in addition to Online Batch Daemon.
I assume you are on FW 2.2+, execute %SPLEBASE%\bin\submitbatch -e %SPLENVIRON% -s 60
and look at 753301.1 white paper on Metalink for more details on configuring Online Batch Daemon.

Reports stay in a pending state

Hi all, I'm hoping to find a little bit of help in regards to an issue I'm having on a Crystal Reports XI R2 server. When reports are scheduled now they stay in a "pending" state and don't run correctly. I've verified that all the servers (they're all on one physical machine) are started and have rebooted, too.
I get a couple of errors in the event viewer:
Event Type:     Warning
Event Source:     BusinessObjects_jobserverchild
Event Category:     Transport
Event ID:     34700
Date:          10/1/2008
Time:          4:32:05 PM
User:          N/A
Computer:     CR-SERVER01
Description:
Transport error: Communication failure.
Event Type:     Warning
Event Source:     BusinessObjects_w3wp
Event Category:     Transport
Event ID:     34700
Date:          10/1/2008
Time:          4:32:32 PM
User:          N/A
Computer:     CR-SERVER01
Description:
Transport error: Communication failure.
I've setup a trace but didn't see anything that stood out as an issue, although I certainly could have missed something. Any hints on steps I could take to get the reports publishing again?

well if you need help right away you should open a message with support and get an engineer assigned. I don't normally work on reporting issues so not much help I'm afraid.
You said the servers are started but are they also enabled in CMC? CCM?
The issue could be from the CMS or job server, did you trace both? The CMS is responsible for sending the job to the job server (at which time it should go from pending to running).
Regards,
Tim

Will dbms_stats.export_database_stats also export pending stats in 11g?

Hi all
In 11g, will the dbms_stats.export_database_stats procedure also export pending stats?
There is an export_pending_stats procedure but we want to export both published and unpublished stats.
Thanks,
Louiza

Check here:
[DBMS_STATS|http://www.morganslibrary.org/reference/dbms_stats.html]
[http://download-uk.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_stats.htm]
HTH
-Anantha

IRP in Pending State

Hi Experts,
Does putting the IRP in pending state for long time creates latency in the system ?
Regards,
Lyf
lyf4sci

no, quite the opposite. it allows you to use the rest of the OS resources while processing of the request is happening.
d -- This posting is provided "AS IS" with no warranties, and confers no rights.

Management Services and Repository pending state?

I just rebuilt the repository for my EMGC(10.1.0) and everything is working fine except under unknown availability in the alert tab I have the entry "Management Services and Repository" - "Target is Temporarily in status pending state. Does anyone know what or how to get this out of the pending state? I shutdown EMGC and restarted it. I have rebooted the box, nothing seems to fix it, it has been this way for 4 days now.
thanks
Larry

4 days? tried metalink yet?
to get you started see note:
290856.1
If that doesn't help or you can't get anything else out of metalink, post again...

Pending State... for a day

I have an H.264 Blue Ray file I have exported from Premiere that is 22G. When I try to build the disc I keep getting an error about how it is in "pending state". I happened to have to do something and just left the program going thinking Encore just needed to do it's thing but that's been a day now and I still get the some message. Any ideas?

If exported as H.264 Bluray, you should use settings that allow it to show as "Do Not Transcode." The file may be a bit too big, depending on what else you have in the project.
Unrelated to that, it helps troubleshooting to use the "transcode now" option to separate problems with transcoding the asset from other issues in the project.

Pending state issue

hi all
i am attempting to run a large scheduling run of 3550 report instances. this is obviously going to take some time so is difficult to test within a decent time frame (3.5 days total - yes they are big)
my problem is that some (20%) of the reports remain in a PENDING state.
the code used to configure the schedule timing is
setRightNow(true)
setType(CeScheduleType.ONCE)
the instance detail for one of the pending jobs is
creation time: 2/26/2010 6:05 pm
next run time: 2/26/2010 6:05 pm
both the invoking java application and the enterprise server are on the same time, locale, etc
can anyone help me out?
cheers
warwick
Edited by: warwick.mayson on Mar 1, 2010 9:13 AM bad grammer

You aren't going to get 3550 jobs running simultaneous, anyways. Job Servers work by spawning child processes for report generation, and the maximum number of child processes are configurable in the CMC.
There's two issues that's commonly encountered, of which one may apply to you:
1. If the Enterprise Java SDK application is hosted on a different machine from the CMS service, you have to ensure that the two machines have their times synched using a time server. When you schedule a report to run Right Now, the Right Now time is determined from the SDK app machine. So if the times are out of synch, a job may wait in pending.
2. Scheduling Web Intelligence jobs, you may encounter a problem where the Web Intelligence Job Server may respond very slowly when so many scheduled jobs are requested at once.
If you set the schedule to not run "Right Now" but Once, where you stagger the start time of jobs, and the issue still occurs, I recommend opening a support case with SAP.
Sincerely,
Ted Ueda

CiscoWorks 3.1 RME devices hung in pending state

Similar Messages

Maybe you are looking for