CiscoWorks Assistant Doesnt support the installed CM & DFM Version

We have Cisco Works 3.1 installed with following details :
1. CiscoWorks Common Services 3.2.0 31 2. Campus Manager 5.1.3 01
3. CiscoView 6.1.8
4. CiscoWorks Assistant 1.1.0
5. Device Fault Manager 3.1.3
6. Internetwork Performance Monitor 4.1.0
7. Integration Utility 1.8.0
8. LMS Portal 1.1.0
9. Resource Manager Essentials 4.2.0
When i try to access CW Assistant (e.g. Workflow) i get error :
CWA27: CWA Does not support the installed Campus Manager & DFM version.
I have tried updating CW Assistant modeul, it says no updates available.

It could be any of the three bugs below, most likely the first two:
CSCsw35439, CSCsv59291, or CSCsk19350. The first two you'd need to contact TAC to get the patches. For the last one, it may be specific to LMS 3.0 only, though you can download the patch directly from http://www.cisco.com/cgi-bin/tablebuild.pl/cwa10
Here're two old threads talking about those bugs:
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd42614
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cbe45e8/0#selected_message

Similar Messages

It doesnt support the operating system for mac? adobe premiere?

it doesnt support the operating system for mac? adobe premiere?

Hi,
which version of Premiere Pro are you trying to install? Also check your system compatibility for Premiere Pro CC as suggested by John. If you are trying to install CS6 or any of the previous versions then you can check the compatibilty from this link. http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-premiere-pro.html MAC OS 10.6.8 should work with Premiere Pro CS6, if your system meets the rest of the criteria. For Premiere Pro CC, 10.6.8 may not work. Check your OS if its a 32 bit or a 64 bit http://support.apple.com/kb/HT3696

Remote Desktop - The Remote Desktop administrator software does not match the installed client software version.

Hi,
I just upgraded to Mavricks and get this when I try to launch Remote Desktop:
The Remote Desktop administrator software does not match the installed client software version.
I tried removing the application and reinstalling it to no avail. Any suggestions?
Thanks.
-David J. Eisen

Hi coold88!
I have an article for you that addresses your issue:
Remote Desktop 3: How to install Remote Desktop Administrator software after the client software has been updated
http://support.apple.com/kb/HT3596
You will want to make sure you have the latest version of the software as well:
About Apple Remote Desktop 3.7
http://support.apple.com/kb/HT5896
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Whether XI (3.0 /7.0) Supports the XSLT 2.0 Version

Hi,
I tried to do the converting the Date Format using the XSLT (2.0 version) functions like (MonthFromDate,YearFromDate,DayFromDate),but I am getting the Transformation Exception Error in the Interface Mapping.(i.e. <b>javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Function with name 'month-from-date' not found in context library</b>).
In Stylus Studio that XSLT Mapping Program is Working Fine,but iam getting the error while testing the Interface mapping using that XSLT mapping program.
Can you please give your valuable suggestions,
Thanks and Rgss,
Kamal Kumar

XI XSLT processor doesn't support XSLT 2.0.
You'll have to stick to XSLT 1.0 or implement your functionallity in a XSLT template or Java function and use it in XSLT with java enhancement.
http://help.sap.com/saphelp_nw70/helpdata/en/55/7ef3003fc411d6b1f700508b5d5211/frameset.htm
Regards,
Henrique.

Itunes doesnt support the G4 anymore? any way around this?

I just learned that my G4 cant upgrade to 10.5 and thus I cant supposedly use the itunes store anymore, anybody have infos on how to deal with this without having to buy a new PC or laptop?
thanks

You can upgrade to 9.2.1 but that is still pretty out of date. If you are wanting to interface with the iTunes Store I hear that 9.2.1 won't connect anymore and you absolutely must have iTunes 10 for which you have to have Leopard+. Note that even having iTunes 10 won't get you some of the absolute newest features for which the system requirements specify Lion even though it is still iTunes 10.
Note that few G4s truly can't run Leopard in some form. There is a lower limit of 800MHz processor but there's Leopard Assist... I've hear various takes on people running Leopard vs. Tiger from those who say it slows down any machine regardless of specs. to those who say they run it on a 400MHz G4 and don't notice much of a difference.
Question #1 is, what do you want to do with iTunes? Some things you may be able to to do with upgrading iTunes itself to 9.2.1, others may be achievable through a system upgrade, others only through buying a newer computer. Consider cost and trouble since you can only go so far in upgrading your current computer for compatibility with a service that to some extent only runs on computers 4 years old or less.
My answer to the question, for example, is very little other than to play my CD collection. So I just stuck with iTunes 7.5. Why not? It does what I want and doesn't insist I have an iTunes account for bells and whistles I don't need. The majority of feature improvements since 7.5 were associated with improved ability to spend money at the iTunes Store.
If your computer is truly old enough to not be able to run Leopard then I'd hesitate to do all the upgrades it would require to get it running Leopard. Leopard itself is already being dropped by Apple and you're going to come up against the ceiling that having a PPC computer won't let you past. I too own a PPC computer and I give it another year, maybe two tops before even simple web navigation will be impossible. I already notice it with the new Apple Discussions web software (thank-you Apple ) which has slowed things down a lot. Anyway, if you end up looking at $300+ to do your upgrading I'd just get a used Intel Mac with a Core 2 duo processor minimum.

Does the TRIAL VERSION of server 2012 essentials support the 'install for migration mode' ?

Hello,
I’m in the process of preparing a transition (migration if you like) from an SBS 2003 environment to a Server 2012 Essentials DC, and separate Exchange platform.
I started with this document http://technet.microsoft.com/en-us/library/jj200112.aspx
I clearly states to Install Windows Server 2012 Essentials in migration mode
In order to transfer the DC role tot the new server.
I’m Using the 180 TRIAL VERSION of windows server 2012 Essentials to test if this will work. The thing is…. I did not get the question to install the server (or run it) in MIGRATION mode !!
Does the TRIAL VERSION enable you to utilize this migration mode or not ?
Thank you,

You might ask them over here.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserveressentials&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

I am getting 'there is no carrier that supports the installed sim card in iphone' but my phone is showing the screen with the usb to be connected to itunes. Am I to leave it plugged to the pc because its still updating or is something wrong?

what should i do? I unplugged it but didnt get any service so i plugged it back in. I need my phone! Please tell me if this is just a process that takes some time and I will have my phone back in a while.

Not knowing what steps were included in "all the troubleshooting possible with Apple people," I'll suggest you give the phone a chance to reprovision your cellular account.
First turn off Wi-Fi. Then power off your phone. Hold the Sleep/Wake button until you see the power off slider. Then slide to power off. Turn the phone back on. After the phone starts watch to see if No Serive is displayed. Hopefully after 15-30 seconds that will change to the name of your cellular service provider and finally indicate LTE or 4G as well as include some dots indicating signal strength. You can then turn Wi-Fi back on.

How do I tell the installed Boot Camp version (Windows 7, 32-bit)?

I installed Windows 7 (32-bit) in a new Boot Camp partition. I see that there are several Boot Camp version updates for 32-bit Win 7 (3.2 from 3.1, etc.). Previously I had Windows XP, and in the system tray at lower right of the screen there was an icon for information about Boot Camp. My Win 7 installation has no such icon. How do I tell which Boot Camp version I am running?
Likewise, Win XP had an Apple utility for setting the startup disk. The only Apple utility I find in Win 7 is Apple Software Update (which shows no updates needed).
What am I missing?

Answered my own question! When I installed Win 7, I failed to install the Boot Camp drivers on the OS X install disk. Did so, and now the Boot Camp icon shows up.

Operating system not supported for installing ALM trail version on a windows 7

My mahine has windows 7 64bit operating system and 8GB Ram but when I am trying to install intall ALM 12.2 it says This machines' operating system is not a supported and recommended ALM (12.20) server.

You need to update your version of XP to SP2. You can do this for free at microsofts website or by using windows update.

How to build a collection based on the installed definition update version

Well I would like to know how to crate the collection of those clients are only installed the definition update? for example, KB2461484
or
Definition Update for Microsoft Endpoint Protection -KB2461484 (Definition 1.169.2635.0)"

thaks Sherry. I got the query:
Query1: via KB title
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner
join SMS_G_System_PatchStatusEx on SMS_G_System_PatchStatusEx.ResourceId = SMS_R_System.ResourceId where SMS_G_System_PatchStatusEx.Title =
"Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.169.2635.0)" and LastStateName =
"Install Verified"
Query2: via KB number
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner
join SMS_G_System_PatchStatusEx on SMS_G_System_PatchStatusEx.ResourceId = SMS_R_System.ResourceId where SMS_G_System_PatchStatusEx. QNumbers = =
"2461484" and LastStateName =
"Install Verified"

My computer doesnt support desktop software 6.1

the problem is my computer doesnt support the latest desktop software version 6.1 but supports other versions.
i just got my phone. and i want to download version 6.0.1 but somehow i cant seem to be able to find the link to downlaod it. the site only allows me to download the latest one. does anyone know where i can download that particular version?

take a look here please
http://us.blackberry.com/apps-software/desktop/system_requirements.jsp#tab_tab_6.0
There is also 6.0.2
Push like button if it worked
Thx
--- Catalonia, next state in Europe ----
Use the "solved" or "Like" icons if my answer helped you.
BES10 administrator for several customers.
"SMPTE Calculator" timecode APP developer for BB10

I have a six year oldG4 laptop which will not support the latest free Adobe flashdrive. Can I upgrade to the latest OS X?

I have a G4 iBook which cannot support/download the new Adobe Flash update. Can I upgrade to the latest OSX?

Can I upgrade to the latest OSX?
No. It may possibly run leopard OS 10.5 but that would be as far as you can take a PPC Mac.
As regards Flash Player:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25, 10.3.x beta, or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

I am trying to move Acrobat XI to a new computer. (Mavericks to Mavericks) Toward to end of the install when 'scripts' a being installed I get an 'Installation error" message. No number or reason just a message to contact the software creator.

I am trying to move Acrobat XI to a new computer. (Mavericks to Mavericks) Toward to end of the install when 'scripts' a being installed I get an 'Installation error" message. No number or reason just a message to contact the software manufacturer.

I am using a copy of a previous download of Acrobat XI, clicking the .dmg and then on the install package.
Originally, the Acrobat software was brought into the new computer by the Migration Assistant.
Does the install assistant need to be in the mix somewhere?

Can't able to start the weblogic server7.0 version

Hi there, I want to work out some ejb examples on weblogic server7.0 release and the installed an evaluation version on my pc, if I want to start my default server where can I sart the default server, when I have gone to start/programs/BEA Weblogic Platform 7.0/weblogic server 7.0/
there I'm seeing three things and I'm confused whcih one is the default server, I'm seeing Server tour and examples, about weblogic server7.0, and weblogic builder, and please tell me which one is the default weblogic server here , and if I want to place my jar files where shall I place them to be picked up by the weblogic default server, cause I can't see any wlserver/config/mydomain/applications directory in this version please help me to start a default server and where to place my things,
any help would be appreciated.
regards,
Shabeer

Copy application jar file to weblogic700/samples/server/config/examples/applications
Start Examples Server with startExamplesServer script
weblogic700/samples/server/config/examples/startExamplesServer
http://e-docs.bea.com/wls/docs70/install/instpos.html#1050604

How to find installed SMD Agent version?

Hi,
Please let me know how to find the installed SMD agent version in managed system.
Thanks,
Kavitha Rajan.

Hello,
Something really easy to differentiate the agents installed:
- 7.01-> /usr/sap/SMD/JXX
- 7.11 or 7.20 -> /usr/sap/DAA/SMDAXX
Regards,
Allam

CiscoWorks Assistant Doesnt support the installed CM & DFM Version

Similar Messages

Maybe you are looking for