Ciscoworks can backup Callmanager?
Hi,
does anybody know if Ciscoworks is able to backup Callmanager configuration?
thnks
We currently only support DRS as the official method for backup for CUCM.
You may also use ESXi features if you like, assuming you're running over ESXi.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
Similar Messages
-
Hello all, I could use some help with my iPhone 4, I hope this is the best place to ask!
The Problem:
I want to do a full backup of my iphone to either itunes or to icloud. Unfortunately the iphone got wet and isn’t working properly. The phone turns on and still works, but the touch screen no longer works. I have a passcode lock on the phone so iTunes will not allow me to backup it up until I type in the passcode (which I cannot physically do). WiFi had been turned off before it got wet so it won’t connect to any known WiFi networks either to backup automatically to iCloud.
What happened:
I had been travelling for 6 months and went tubing on a river with my iphone in a dry bag. Unfortunately the dry bag failed and filled with water ruining my iphone.
What I’d like to do:
It’s an old phone and I was planning on buying a new iPhone anyway. I would love to do a full backup to either iCloud or to my computer so when I get a new iPhone I don’t lose anything. I’ve already connected it to my PC and downloaded all the photos and videos off the phone so at least I haven’t lost that, but I would like to be able to recover all the text messages, WhatsApp messages and notes I had created during my 6 months of travel.
The last time it was backed up to my pc or to icloud was in April, so there are 6 months worth of very meaningful data I would love to keep to remind me of my travels!
Is there anyway to force a full backup of the iPhone without typing in my passcode lock or is there anyway to force it to connect to a WiFi network so the phone can backup to iCloud??
iTunes recognizes the phone just now and I tried upgrading the phone to iOS7 in the hopes that it would first backup and then upgrade. Unfortunately all that happened is the phone upgraded to iOS7, but it didn’t backup to iTunes. Now the phone is stuck at the iOS7 welcome screen and I can’t do anything else with it.
Any ideas or tips would be welcome!
NOTE: This is NOT a jailbroken iPhone.If there is no other way around this, is there anyway to completely wipe the phone then??
The Apple store agreed to give me a new iPhone 4 as a warranty replacement for $150 (I travel a lot and I have a factory unlocked phone, so this is still worth it for me). But before I trade it in, I would like to make sure all my data is backed up on the device first.
When I try and restore the phone now on iTunes, it says I have to turn off Find My iPhone on the phone first before I can restore it. Now since I can't use the screen I can't really do that.
So how do I completely wipe the iPhone???
Thanks! -
I am planning a long vacation and taking my laptop but it is my home computer that my new ipad and ipod touch are synced too. I know i can backup to the cloud over wifi but how can i do things like delete photo albums instead of having to manually delete pictures one by one on the Ipad. Is there any way also to add my pictures to the ipad other than through email. i am assuming that i can't just install itunes on the laptop and sync to that. I have been told that i always have to sync to my original synced home computer for that.
The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
Cheers, Tom -
How i can backup & restore in selected data?
create table a (backup_id number, ......)
create table b (backup_id number, ......)
create table c (backup_id number, ......)
100 table created
how i can backup all data only backup_id = 1??
how can it possible ????acctually i want to full database backup
but few table i can selected data????
DECLARE
l_dp_handle NUMBER;
l_last_job_state VARCHAR2(30) := 'UNDEFINED';
l_job_state VARCHAR2(30) := 'UNDEFINED';
l_sts KU$_STATUS;
BEGIN
l_dp_handle := DBMS_DATAPUMP.open(
operation => 'EXPORT',
job_mode => 'TABLE', *?? HOW I CAN FULL DATABASE BACKUP*
remote_link => NULL,
job_name => 'EXPORT4',
version => 'LATEST');
DBMS_DATAPUMP.add_file(
handle => l_dp_handle,
filename => 'TEMP.dmp',
directory => 'TEMP');
DBMS_DATAPUMP.add_file(
handle => l_dp_handle,
filename => 'TEMP.log',
directory => 'TEMP',
filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_LOG_FILE);
DBMS_DATAPUMP.data_filter(
handle => l_dp_handle,
name => 'SUBQUERY',
value => 'WHERE OPERATOR = ''+''',
table_name => 'TEMP');
DBMS_DATAPUMP.data_filter(
handle => l_dp_handle,
name => 'SUBQUERY',
value => 'WHERE OPERATOR = ''+''',
table_name => 'TEMP2');
DBMS_DATAPUMP.start_job(l_dp_handle);
DBMS_DATAPUMP.detach(l_dp_handle);
END;
HOW I CAN FULL DATABASE BACKUP & TEMP & TEMP 2 APPLY DATA_FILTER ??? -
HT204088 How can backup my photos if I don't remember my iphone passcode
How can backup my photoswith my trusted computer if I don't remember my iphone passcode
The passcode is a security feature. Creating a workaround just allows for exploitation and the possibility to steal data. Let me ask you this, how long have you had the phone? How long have the photos been on the phone. iTunes and iCloud provide you several options for backing up your device, and the iCloud one does not require any input from you after the initial setup. You just connect it to power and Wi-Fi, such as going to bed at night, and lock the screen. The device will automatically backup ever day.
-
RMAN can backup/restore diferent versions of Oracle DataBases regardless OS
Hi,
I am evaluating Recovery Manager to backup and restore Oracle databases.
I have to backup/restore diferents versions of Oracle database, these databases are running in diferents operating systems (AIX, LINUX, Windows)
For example:
Oracle DataBase 9 in AIX 5.3 system
Oracle DataBase 10 in Lunix system
Oracle DataBase 9 in Windows system
I want to have a single RMAN server in order to backup/restore all my Oracle DataBases, is it possible?
A single RMAN server can backup/restore diferent versions of Oracle DataBases regardless the operating system?
If the answer is yes, do I need to have an specif operting system in my RMAN server? (AIX, Linux, Windows, etc.)
Thanks for your help;Hi,
Your question:
I want to have a single RMAN server in order to backup/restore all my Oracle DataBases, is it possible?
Sounds more like a machine.
If you would have asked:
I want to have a single RMAN recovery catalog in order to backup/restore all my Oracle DataBases, is it possible?
I would have confirmed as like the other two.
Be aware the catalog version needs to be equal or higher as the highest database version.
Regards,
Tycho -
How many macs can backup to a 3tb time capsule?
If I get a 3tb time capsule is there any limit (apart from the drive size) on how many macs can backup to it. At the moment no more than about 20gb of data per mac. Also has the reliability of the time capsule improved with the new version - I would like it to last longer than 18 months.
Thanks
BenLet's assume that you backup each Mac separately on the first backup since that will copy the entire contents of the Mac's drive over to the Time Capsule disk. That might average 2-3 hours per Mac.
Once you have the "master" backup of each Mac completed, you can set each of them up for incremental Time Machine backups. On average, the hourly incremental backups only take a few minutes to complete. To be conservative, call it 5 minutes.
So if it takes each Mac about 5 minutes for an average incremental backup, the realistic limit of Macs backing up to a single Time Capsule would be in the 10-12 range. I've had 5 Macs backing up for 3 years with no issues whatsoever.
It would be a good idea to purchase AppleCare for one of your newer Macs if possible. That way, your Time Capsule is covered up to 3 years.
Keep in mind that we tend to only hear about issues on the forums. In that respect, this place is like a hospital...just about everyone here has a problem. No one ever seems to post to report that everything is OK.
You don't hear about the millions of devices that are working just fine, so it's tough to make a judgement on a product based on what you see and read here. -
How can backup the old deta from time machine to OS X LION??
Hi there,
I was using MacPro with older snow leopard just now i install OS X LION,before install i backup all deta to time machines about 70GB,now when i connect i dont know how can backup the old deta to OS X LION,but it just backup the recent deta to time machine,pls guide me how i can backup my old deta to my computer??
Will be much appreciated !!
Thanks.Sorry, but your post is not clear.
If all you did was upgrade to Lion, there's no reason to do anything. All your data, etc., should still be on your Mac, just as it was before.
Please clarify exactly what you did, and what the problem is. -
How I can backup from another Hard disk through my Macbook air?
How I can backup datas from another external storage disk by using My Macbook Air?
How I can backup from another hard disk through my Macbook air in Time Capsule?
-
My IPhone need to restore, but I want to backup my data first.
Itunes keep telling me you must restore this iphone before it can be used. How I can backup my data?At this point it is too late. When you restore it will restore the backup made at the time of the last sync. And changes to the phone's content after that last sync will be lost.
-
My iphone 4 wont backup to my computer. Says "Could not be save on computer." But i can backup my 3gs just fine.. Whats the story???
nlmpt1
Re: iTunes could not back up iPhone because the backup could not be saved on the computer
Aug 19, 2013 6:23 PM (in response to BogdaNYC)
Did you ever figure this out? I followed these instructions and it worked! May have had something to do with the old MobileMe program becoming obsolete. After you click "Finder", then "Go", then hold down "option" button, then click "library" folder, then follow folders as listed. I also deleted the MobileMeSyncClient folder (found in the same location) since it is no longer in use either.
Ruddsey
TS2529 Re: ■iTunes could not back up iPhone because the backup could not be saved on the computer
Sep 21, 2012 2:49 PM (in response to mohammedfromdammam)
this works...
You need to delete the MobilSync backup folder. I have a Mac. Went to /Library/Application Support/MobileSync/Backup and deleted the Backup folder.
to find your "library" folder you need to open "finder" then go to the top tool bar menu and open "go" then hold down the "option" button and "library will appear in the "finder " menu on the left hand side... cheers -
Hi there,
I was using MacPro with older snow leopard just now i install OS X LION,before install i backup all deta to time machines about 70GB,now when i connect i dont know how can backup the old deta to OS X LION,but it just backup the recent deta to time machine,pls guide me how i can backup my old deta to my computer??
Will be much appreciated !!
Thanks.>Step 1. Backup existing data using time machine.
Time Machine is nice, but you have very little in terms of ability to verify that your data is all backed up. I find Time Machine is better for the occasional recovery of previously written data at specific times. A good backup solution that survives an erase and install (there is no clean install in Mac OS X), is a clone, and preferably TWO clones. See my FAQ*:
http://www.macmaps.com/backup.html
Time Machine can work as good as a clone, and in fact I once had to rely on it because my hard drive died. Thankfully it did recover everything. But I had my clone just in case it didn't work. Now I feel more comfortable since clones allow you to boot themselves, and thus prove all the important system information got saved, and not just the user data.
Clones are also easier to import with the migration assistant. -
How do I get my pics from icloud to my pc so i can backup on a cd?
How do I get my pics from icloud to my pc so i can backup on a cd?
You can't, since pics are not stored on icloud (unless you are using photo stream to sync photos from some device to the pc or the pics are in a backup).
You must sync the photos from the device that currently stores the pics to the PC using itunes. (You haven't said how you got pics to icloud, I assume it's from some device and the pics are in an icloud backup - if so, there's no way to get the backup to a computer.) -
CiscoWorks LMS Backup Failed - Insufficient Disk Space
Hello,
I am experiencing backup failure on the LMS 3.2. Following is the message
Backup failed on 2010/08/14 at 23:11:11. REASON: Insufficient disk space on backup destination volume. Available Space is 65367892Kb and required space for backup is 78515097Kb.
Could you please assist as to why is 78GB of space required for the backup. The total size of main CiscoWorks folder 'CSCOpx' is only 33GB.
How can I identify which processes, folders are occupying more space thereby increasing the backup capacity. Also, are the previous backups, backed up again on subsequent runs. Please assist.
Thanks.The LMS backup destination partition needs twice the space the backup will take (plus 10%) to copy out the files first before archiving them in the backup. Therefore, if the CSCOpx directory is 33 GB, your backup partition will require around 72 GB of free space.
-
I have a Sony Vaio desktop PC with a partitioned hard drive, running Windows XP Pro. There is 13 gb on C drive with the OS, and 140 gb left on D drive. I am trying to update my Original Ipad from 4.3.4 to 5.1.1 and because C drive is full ( I have moved everything that can be moved to D drive) mostly from Microsoft updates over the years, I am unable to do the backup Itunes is telling me I have to do to update or lose all media on this iPad. 12.67 gb is required to do the backup and I have a whopping 965.2 MB. I can not get the cloud to use as backup as it requires 5.0 or better. Does anyone know if I can back up to D drive, and if so how? Also, I have a 1 terrabyte WD mini external hard drive I just got as a gift...could I do the backup to it and, again, if so, how? Please explain from start to finish, as my brain is now fried from, first from finally getting Itunes updated to 10.6 ,and now trying to do this update. Thanks to anyone for their help!!
iOS device backups are stored in your iTunes library.
Move your iTunes library to an external drive.
Maybe you are looking for
-
HP C310A PREMIUM PHOTOSMART PRINTER APP ENABLED BUT HP SAYS IT IS NOT HELP!
need help please! i have a c310a premium photo smart printer which has the big touch screen and is of course web and app enabled , my problem is when i go on hp connected now it tells me the c310a is not applicable for app downloads ?? i bought this
-
I was wondering if anyone else had this problem, I was on my Macbook air earlier and it was fine, Then i put it to sleep and closed the screen, I tryed turnong it back on earlier bit it turns on as i can hear it but the screen is just black, Can anyo
-
This is a 5th Gen nano that I'm talking about.
-
I have been using the new iCloud for the past week, now when I try to open any file, I get this message. "The document "filename" could not be opened." I am connected to the Internet. I signed into to iCloud and I can see it in the iWork (which I tho
-
BI Scheduler - remove Telephone Settings from users
Hi I upgrade to obiee 11.1.1.6.2 BP1. In 10G I set up system subject area to set a mail address in all profiles of my users. In 11G I kept the system subject area but I'm not sure if it's really getting the details from there. I also configured AD-Au