CiscoWorks-Config collection problem
Hi,
I have configured config collection on Cisco Works. But only one device's configuration has been succesfully collected, rest of the devices are showing failed.
check the log...showing telnet authentication failed 3 times. but I have checked the username and password configured on Cisco Works is perfect even the same username and password configured on the device, which configuration collection succeded.
Please give me some troubleshooting process so I can fix the issue.
yes..I have checked so many times...and username / password is ok....but still I am not able to fix the problem.....It the username and password is configured wrong , then it should work for one device,,,because the username and password is configured in Tacacs Server and same for all devices.
Similar Messages
-
Config collection fails occasionally in LMS 4.2
Hello,
In recently installed LMS 4.2 archive collection is failing from time to time for random number of devices with error:
"Execution Result: CM00139 Could not archive config Cause: Action: Verify that device is managed and credentials are correct. Increase timeout value, if required."
We have sceduled config collection job to run every day. Credentials are ok. The LMS data is restored from LMS 3.2. Timeout seeting is the same as in LMS 3.2 and we never had this problem before.
Somtimes it is working for 10 days correctly, and then one day it is not successful for 70 out of ~150 device. Then t is successfull for few days, then again fails for 86 devices. Collction is scedueld in the evening so devices are not overloaded, nor there is some other job in LMS running at the same time.
Any ideas?
Thanks,
Marija
IThe following did resolve my issue
The bug is fixed in the one of the latest device packages for LMS, SharedSwimIOS.RME525.v2-13-3. The release notes for it is here: http://www.cisco.com/web/software/283418817/118429/SharedSwimIOS.RME525.v2-13-3.readme.txt
Before applying that device package update, the following prerequisites need to be met:
- LMS 4.2.5
- MDF 1.92 (or higher) update : https://software.cisco.com/download/release.html?mdfid=284259296&flowid=37207&softwareid=283716219&release=Mdf.%201.92&relind=AVAILABLE&rellifecycle=&reltype=latest
- LibSwim.RME525.v2-13-1.zip & SharedDcmaIOS.RME525.v5-1-2.zip device packages already installed. Those two files and the SharedSwimIOS.RME525.v2-13-3 file can be found here: https://software.cisco.com/download/release.html?mdfid=284259296&flowid=37207&softwareid=283418817&release=AutoDev%285.8%29&relind=AVAILABLE&rellifecycle=&reltype=latest -
Folks, How do you stop tftp being tried for Config collection ?
Hi there. We use LMS 3.2 with RME 4.3.1.[Solaris 10].
tftp is band across our network. So we don't use tftp remotely.
I've removed tftp from the RME config transport settings. [I just allow SSH / SCP ]
We still get 'couldnot determine the tftpboot directory. VLAN Config fetch is not supported using SCP'.
How can config RME to not even attempt to use tftp when pulling back switch configs ?
We don't want the old vlan.dat database form our older switches. Config collection also tries to tftp to routers to pull back the VLAN config.
Please have a think ? Many thanks. GuySo it still tries anyway?
Well, if you use SSHand RCP/SCP you could try to disable the TFTPserver of ciscoworks.
It is a regular windows service (on the windows version of LMS ofcourse) just stop and disable it.
Archive will fail because it can't get vlan.dat ofcourse but that is how RME is hardcoded
Cheers,
Michel -
Hi, i'm looking for a way to collect config's from specific devices periodically, is this possible?
for example, collect configs from firewalls everyday at midnight , and collect routers config once a week.
firewalls: (about 3 devices, config changes every day)
routers: (about 800 devices, rarely change the config)
the only config collection schedule i have found so far is too simple:
admin > collection settings > config > config collecion settings > periodic collection
second question, is it possible for cisco lms to send via e-mail the diff of the config pulled from devices? i mean the specific commands that have appeared in the new configuration file.
regards, ignacioUnfortunately, LMS syslog mechanism is very minimalistic and doesn't have a lot of options to it.
However, the feature you're requesting is not very much LMS dependent. As, Ciscoworks depends on the kind of syslog message it receives from device, based on it, it captures some characters to send a notification as automated actions.
So usually it is the device which won't send a lot of information on what changes was done by which user in normal IOS syslog messages.
But, to certain extent, you can try to configure you device for Configuration-Change logger to receive details on what changes were made by users and check it on the syslog report, or configure AA on it for all or important devices.
You can enable a configuration logger to keep track of configuration changes made with the command-line interface (CLI). When you enter the logging enable configuration-change logger configuration command, the log records the session, the user, and the command that was entered to change the configuration. You can configure the size of the configuration log from 1 to 1000 entries (the default is 100). You can clear the log at any time by entering the no logging enable command followed by the logging enable command to disable and reenable logging.
Use the:
show archive log config {all | number [end-number] | user username [session number] number [end-number] | statistics} [provisioning] privileged EXEC command to display the complete configuration log or the log for specified parameters.
This example shows how to enable the configuration-change logger and to set the number of entries in the log to 500:
Switch(config)# archive
Switch(config-archive)# log config
Switch(config-archive-log-cfg)# logging enable
Switch(config-archive-log-cfg)# logging size 500
Switch(config-archive-log-cfg)# end
So, in all, it depends on the device and the kind of syslogs it send for LMS to react on it.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
LMS 4.2 - Config collection issue
After launching config collection job in LMS 4.2 I can't get job results and receive error message - Unable to get results of job execution for device...
I've increased the job result wait time using option in Admin > Collection Settings ... , but nothing changed.
Here are screenshots of error message and wait settings I used:
Thanks in advance!i have seen this with SNMP timeout needed to be increased.
please try to increase those values, and not the job completion values.
I just saw in CP LMS 4.2 that the values are assembled on a new page.
all of them ...
Admin > Network > Timeout and Retry Settings > Inventory/Config Timeout and Retry Settings
also in the navigator of the same last windows your screenshot is from try the device specific timeouts:
Admin > Collection Settings > Config > Edit the Inventory/Config Timeout and Retry Settings
HTH -
LMS 4.0 Config collection vlan.dat
Hi Guys,
I have a network with 4500, 3560 and 2960 switches.
In my LMS I have created 1 credential set to access all the switches. The config collection (startup, running and vlan) has succeeded for all the 2960 switches. The collection of the running and startup config has also succeeded for the 4500 and 3560 switches. But LMS doesn't collect the vlan.dat from the 4500 and 3560 switches. (inventory collection is ok with all the switches).
I have only configured SSH as config fetch protocol.
Why doesn't my LMS collect the vlan.dat of the 3560 and 4500 switches. The difference between the 2960 and the other switches is that there are only 2 vlans created on the 2960 switches and +30 vlans on the 3560 and 4500 switches.
Is the vlan.dat file maybe to big on the 3560 and 4500 to be collected with ssh...
Any ideas?
Thanks,
Best Regards,
JorisI believe that LMS 4.2 can get the vlan.dat via SCP. Prior versions require TFTP to do this.
The commands to start the TFTP can be send via TELNET, SSH and possibly SNMP.
Cheers,
Michel -
11g Grid Control - Host Configuration Collection Problems
Hi Guys,
I just installed Oracle 11g Grid Control and it has been running for 2 weeks until I recently tried to walk through the parts of it.
My intention was to clear off all the error messages, critical warnings, alerts, and policy warnings.
When I arrived at the development summary box, on the home tab, I can see that there is 1 collection problem.
When I clicked it, I saw that apparently the problem is with the host where I installed the grid control.
Problem type: Warning during collection of Oracle Software
message: Unknown WLS Home Location or WLS Version in Middleware Home /u01/app/oracle/product/middleware
I tried clicking on the "Refresh Host" button, but it didn't solve the problem at all.
I have also tried to take a look at the targets.xml however it seems the configuration in there are already pointing to the correct path to the weblogic home.
Please let me know if anyone has a suggestion for this.
Searching from google doesn't really return anything closely matched to this.
Thanks,
AdhikaWhat is the intent/timeline for fixing this bug? On MOS, it appears to have a status of "Status 33 - Suspended, Req'd Info not Avail". We are encountering this bug also and I would glady provide information from our systems in order for the issue to be resolved.
Thanks.
PostScript: FWIW, Google yielded a blog referencing this error and Doc ID 1433113.1. I am unable to access that document (as was the blogger). Because of this, and another major caveat (our machines with this collection error do not have WLS installed on them), I'm thinking this probably needs to be an SR rather than a forum discussion.
Edited by: JeriF on Feb 4, 2013 12:00 PM -
LMS 4.0 Config Collection failure
Hello Members,
i've added manually a bunch of Cisco Router 2911's and 2801's. On one of the the 2911 and 2801 the Config Collection fails. Data Collection, User Tracking, Inventory and Fault Discovery worked fine for all routers just on the two routers i get the failure?
any ideas? Which log do i have to check?
regards
alexI believe the LMS reports this error because there was no vlan.dat in the
flash of the router. after adding a vlan.dat file on in the flash the vlan config
could be fetched and the error message doesn't appear any more.
regards
alex -
Iphone 5 OS 6.1.1, When I turn off or restart device, this device automatic unmute. How can i config this problem?
Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
Apex_application.g_fXX and collection problem
Hello all!
In the midst of writing my second apex application, it appears I need to use apex_application functionality to meet my requirements and am seeking assistance.
I have a table/report with a column link (item_id) and a second column (as a text field) (there are more columns displayed), but I think they are irrelevant to this situation) populated with a value QTY (c002) from a collection where c001 = item_id. What I'm attempting to do is allow someone to enter a qty in the c002 text field, apply the qty change to the collection and reload the page displaying the new quantity value in the report when the column link (image) is selected (page redirects to itself).
Since it appears that column links are not a SUBMIT, I've put my collection update plsql in a before header process. According to the debug output, this collection insert is executed long before the rendering of the report.
This is my report plsql;
declare
l_query varchar2(4000) := '';
begin
l_query := 'select i.INVENTORY_ID, col.c002, ql.QUANTITY_AVAILABLE, i.STRAIN_CODE, i.STRAIN_NAME, i.GENOTYPE, i.AGE, i.SEX, ql.ROOM_NUMBER from SM_INVENTORY i, SM_QUANTITY_LOCATION ql, apex_collections col where ql.STRAIN_ID = i.STRAIN_ID(+) and col.collection_name (+)= ''ORDER'' and col.c001 (+)= i.INVENTORY_ID';
end;
This is my update collection plsql (I don't have the insert part yet, but my collection already contains values);
declare col_item_count number;
col_seq number;
item_id number;
qty number;
begin
if apex_collection.collection_exists('ORDER') = FALSE then
apex_collection.create_collection( p_collection_name => 'ORDER');
commit;
end if;
for i in 1..apex_application.g_f01.count
loop
item_id := apex_application.g_f01(i);
qty := apex_application.g_f02(i);
select count(c001),seq_id into col_item_count, col_seq
from apex_collections
where c001 = item_id
and collection_name = 'ORDER';
group by c001, seq_id;
if col_item_count > 0 then
apex_collection.update_member(
p_collection_name => 'ORDER',
p_seq => col_seq,
p_c001 => item_id,
p_c002 => qty);
commit;
end if;
end loop;
end;
Given all this, my collection entry is not updated with the new value of c002 displayed in my report text field.
Be advised, I've not found documentation about the apex_application package of sufficient detail to allow me to comprehend exactly what gets put into the apex_application.g_fXX values or when, but based on what I've gathered from examples/blogs, I think it contains the report in the currently rendered page, but I honestly don't know.
Given my assumptions, I'm expecting apex_application.g_f01(1) would be the first row item_id of my report and apex_application.g_f01(2) would be the first row c002 (qty from my collection) of my report. If this is correct, I would expect this would work.
What might I have missed?
Thanks!
Paul
PS. Honestly, is this methodology the only/easiest way to get my requirement/functionality to work? Is there an easier way?OK, tried this - not yet successful. This is what I've got.
Classic report loaded by;
declare
l_query varchar2(4000) := '';
begin
l_query := 'select i.INVENTORY_ID, i.INVENTORY_ID inv_id_hold, col.c002, ql.QUANTITY_AVAILABLE, i.STRAIN_CODE, i.STRAIN_NAME, i.GENOTYPE, i.AGE, i.SEX, ql.ROOM_NUMBER from SM_INVENTORY i, SM_QUANTITY_LOCATION ql, apex_collections col where ql.STRAIN_ID = i.STRAIN_ID(+) and col.collection_name (+)= ''ORDER'' and col.c001 (+)= i.INVENTORY_ID';
end;
Created a "SAVE" button.
Set up column inv_id_hold as a hidden tab form element and col.c002 as a text field tab form element (item_id and qty respectively). These should now be available as apex_application.g_f01 and apex_application.g_f02 (right?).
I have this post submit plsql in a process conditioned to the "SAVE" button.
declare col_item_count number;
col_seq number;
item_id number;
qty number;
begin
if apex_collection.collection_exists('ORDER') = FALSE then
apex_collection.create_collection( p_collection_name => 'ORDER');
end if;
for i in 1..apex_application.g_f01.count
loop
item_id := apex_application.g_f01(i);
qty := apex_application.g_f02(i);
select count(c001),seq_id into col_item_count, col_seq
from apex_collections
where c001 = apex_application.g_f01(i)
and collection_name = 'ORDER';
--group by c001, seq_id;*
if col_item_count > 0 then
apex_collection.update_member(
p_collection_name => 'ORDER',
p_seq => col_seq,
p_c001 => item_id,
p_c002 => qty);
else
apex_collection.add_member(
p_collection_name => 'ORDER',
p_c001 => item_id,
p_c002 => qty);
end if;
end loop;
end;
When I enter something in my qty column and press SAVE, I get "ORA-01403: no data found" being thrown by the plsql process (per debug). Since everything is going on "under the hood" and there is no step debugger in apex, I'm not able to see/understand the process in action and determine where the problem is occurring.
I got the idea for all of this here - http://apex.oracle.com/pls/otn/f?p=39839:3:5596350954563087::NO which is the shopping cart page of the online store application. But I'm trying to get the quantity edit portion to work on the inventory listing (so a customer can add items to an order simply by providing qty input for a particular line item(s) and saving).
Any advice?
Can you write an order processing system in apex that uses a collection to store line items? -
CS4 Master Collection - Problem occurred while extracting...
After spending $1,500 and two days of RL time downloading the CS4 Master Collection twice, I am just a tad frustrated.
Each time I download the CS4 suite file and try to install it, I immediately get the error:
"A problem occurred while extracting the archive. Please try downloading the Adobe CS4 Master Collection again."
No. I refuse to spend another full day downloading this file yet again just to receive the same error.
Anyone have some insight into this problem? (more so than "turn off your anti-virus program"
Thanks in advance.I am having the same problem. I found a forum that suggested this. Apparently it worked for some people, but not for me. Let me know if it does:
1. Start -> All Programs -> Accessories
2. Right-click on Command Prompt and select "Run as..."
3. Run as Administrator (even if you are logged in as Admin. You need to run in the Black Command Prompt, not the White one)
4. Run: regsvr32 JScript.DLL
5. Then run: regsvr32 vbscript.DLL
(dont forget the spaces, or it won't work)
6. Then try running the set up again
As i said, it worked for some on the forum, but not others (like me). Try it and see if works for you -
CS4 Master Collection - Problem Applying Updates
Hi
I'm running the CS4 Master Collection on Windows Vista Ultimate 32-bit, SP2.
Normally I have no problem applying updates to the various Adobe components when they become available, however for a while now I've been unable to instal an update that's reported as being available for Adobe Media Encoder 4.1.0.
If I run the "check for updates" manually I can download the update (reported as being 63.7MB) and when I attempt to instal it the installation process appears to run. It finishes after a while and the Adobe Updater reports "The Udating Process is Finished" in a single dialog box with a single button entitled "Quit" - which seems odd as "Quit" implies "finish earlier than planned", I'd have expected something more in line with "All done", something like "OK".
Anyway, when I run the check for updates again I'm told about the same update implying that it wasn't applied successfully.
I get this behaviour whether I run the update as an Administrator or not (all other updates for other products are applied without problem). I also get it regardless of whether or not I reboot the machine after trying to apply the update.
Does anyone have any suggestions on what could be causing the problem ? I couldn't find anything obvious or obviously relevant in any of the Windows event logs on the PC.
Thanks for any ideas
SteveI am having the same problem. I found a forum that suggested this. Apparently it worked for some people, but not for me. Let me know if it does:
1. Start -> All Programs -> Accessories
2. Right-click on Command Prompt and select "Run as..."
3. Run as Administrator (even if you are logged in as Admin. You need to run in the Black Command Prompt, not the White one)
4. Run: regsvr32 JScript.DLL
5. Then run: regsvr32 vbscript.DLL
(dont forget the spaces, or it won't work)
6. Then try running the set up again
As i said, it worked for some on the forum, but not others (like me). Try it and see if works for you -
Collection problem with RFC function module WSDL.
Hi.
I have developed an RFC function module in a SAP system version 4.7 (WAS 620). This FM has 2 table parameters. I have no problem when I see the WSDL in the SAP Web Service Browser.
Another team is trying to consume this RFC FM as a web service from a Java application but they say they can't see the table parameters as collections.
Here is the WSDL of the FM, the table parameters are T_MOVIM and T_ERROR:
<?xml version="1.0" encoding="UTF-8" ?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:s0="urn:sap-com:document:sap:rfc:functions" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="urn:sap-com:document:sap:rfc:functions">
<types>
<xsd:schema targetNamespace="urn:sap-com:document:sap:rfc:functions">
<xsd:element name="ZMMFUSAPTK_0001">
<xsd:complexType>
<xsd:all>
<xsd:element name="GENIDOC" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="T_ERROR">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0012" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="T_MOVIM">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0011" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
<xsd:element name="ZMMFUSAPTK_0001.Response">
<xsd:complexType>
<xsd:all>
<xsd:element name="CODRET">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="T_ERROR">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0012" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="T_MOVIM">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0011" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="ZMMTASAPTK_0011">
<xsd:sequence>
<xsd:element name="REFERENCIA" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="FECHACONT" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="8" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="FECHADOC" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="8" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CODMOV" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="2" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="NROPLAN" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="12" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="NROCOMP" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CLASEMOV" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="3" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CENTRO" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ALMACEN" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MATERIAL" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="5" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LOTE" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CANTIDAD" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="15" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MOTIVOMOV" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CENTROREC" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ALMACENREC" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CENTROCTO" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ORDEN" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="12" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="TIPOSTK" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="NROPEDIDO" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CODCISTERNA" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="ZMMTASAPTK_0012">
<xsd:sequence>
<xsd:element name="REFERENCIA" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CODERR" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="3" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MSJERR" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="100" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</types>
<message name="ZMMFUSAPTK_0001Input">
<part name="parameters" element="s0:ZMMFUSAPTK_0001" />
</message>
<message name="ZMMFUSAPTK_0001Output">
<part name="parameters" element="s0:ZMMFUSAPTK_0001.Response" />
</message>
<portType name="ZMMFUSAPTK_0001PortType">
<operation name="ZMMFUSAPTK_0001">
<input message="s0:ZMMFUSAPTK_0001Input" />
<output message="s0:ZMMFUSAPTK_0001Output" />
</operation>
</portType>
<binding name="ZMMFUSAPTK_0001Binding" type="s0:ZMMFUSAPTK_0001PortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
<operation name="ZMMFUSAPTK_0001">
<soap:operation soapAction="http://www.sap.com/ZMMFUSAPTK_0001" />
<input>
<soap:body use="literal" />
</input>
<output>
<soap:body use="literal" />
</output>
</operation>
</binding>
<service name="ZMMFUSAPTK_0001Service">
<documentation>SAP Service ZMMFUSAPTK_0001 via SOAP</documentation>
<port name="ZMMFUSAPTK_0001PortType" binding="s0:ZMMFUSAPTK_0001Binding">
<soap:address location="http://dbades00.bue.bemberg.com.ar:8002/sap/bc/soap/rfc" />
</port>
</service>
</definitions>
Should I change something in the definition of the parameters of the FM? or the problem is with the parsing process on the other system?
Thanks in advance.
Fabian.Welcome to SDN.
I am not sure about this particular issue, but i have used WSDL from WAS6.20 system in MS Office infopath to consume webservice where we have had table parameters without any issue.
may be try with office infopath to make sure that the problem is with the WSDL or with the java application.
Regards
Raja -
Hi,
I have a problem with collecting messages and sending them together. I'm trying to work out a simple correlation example. Its a File -> XI -> File scenario. I followed the blog
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
to work this out. My BPM looks like
a block which contains an infinite loop with Receive and Container steps, an exception step and a deadline step with deadline 2 mins --> Transformation step --> Send step that sends out the bundled message.
My problem is, after the file is being picked up by XI, nothing happens, on MONI the Outbound status is stuck in "Message being sent" status forever. On the Process engine workflow the deadline step is executed, but it is not proceeding to the Transformation and send step.
I've read a lot of material on this forum, it seems simple but for some reason I'm not able to get this to work.
Could somebody please guide me on this?
Thanks
KarthikHi,
Check this <a href="http://help.sap.com/saphelp_nw04/helpdata/en/96/0a2441509fa831e10000000a1550b0/content.htm">Montioring the BPE</a> for debigging your BPM.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm">Collecting and Bundling -- Single Interface</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm">Collecting and Bundling -- Multiple Interface</a>.
Regards,
Bhavesh -
Data collection problems in LMS 4.0
Hi, we have some devices in our LMS 4.0 where Data Collection cannot be collected. The strange thing is that some days ago they were working fine and we have SNMP connectivity. We have deleted the devices and have added them again but the problem still persists, how can we fix it?
From the LMS server do the following:
1. ping the devices that you cannot collect their data
2. test the snmp connection to those devices using snmpwalk
go to CSCOpx\objects\jt\bin
snmpwalk -v 2c -c 1.3.6.1.2.1.1.2
3. test the credintials against those devices (Inventory> Job Browsers> Device Credentials Verification)
For any failure in 1 or 2 usually this is a firewall problem. Check if snmp and icmp ports are open or not.
For 3 failue check the credintials from (Inventory> Device Administration> Add / Import / Manage Devices)
I hope this help
Maybe you are looking for
-
How to delete the index of a deleted account
So here's the deal. I deleted an old Gmail account ( I think it was set up as imap) a few months ago. Last night I'm searching Mail and I find all of these hits, but the mailbox column is blank, I cannot read the message, and I cannot select "Show in
-
Someone knows about an example on splitting a message into several messages (multiline element), the target message type is of one type.
-
All clips in project are zoomed in
I was trying to put a title with a cross dissolve and hit something that made all the clips in my project zoom in. There is a tiny little rectangular box with a smaller red rectangular box in the canvas. Can anyone help me so I don't have to start
-
HT3702 I am still having trouble , even though cc # is correct and $ in account
Why am I still not able to make purchase on iTunes? Have made deposit and cc # is correct
-
How do I find english on my ipod nao
I can't find english on my ipod, how do I find it?