Ciscoworks daemon manager stuck at Stopping state

I am working on LMS 3.2 . Tried to stop the daemon service with " net stop crmdmgtd ". It stuck on stopping state since few hours now. I can still open the application. Need a suggestion to terminate the previous command and restart the
daemon service.

You should have dmgtd.exe process in Task Manager stuck.
Although you can kill it directly and then try the stop command once again before starting. But to be sure if any process in not stuck, best way would be to reboot the server once.

Similar Messages

  • LMS 3.2 CiscoWorks Daemon Manager does not startup

    When trying to start CiscoWorks Daemon Manager i get the following message:
    "The CiscoWorks Daemon Manager service on local computer started and the stoped. Some services stop automatically if they are not in use by other services or programs."
    I have tring starting the service from DOS also and get:
    E:\Program Files\CSCOpx\setup\support>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    resting the casuser pasword also did not help.
    Anyone know of a solution?

    Hi
    That was the initial problem, we did increase the swap file space and still get an error. See the errors on the 22nd..
    Dec 22 07:20:33 127.0.0.1 dmgtd: Http is the port in ssl.properties file and apacheflags to be set is -d E:\PROGRA~1\CSCOpx\MDC\Apache
    Dec 22 07:20:33 127.0.0.1 dmgtd: PX_PROTOCOL in registry http
    Dec 22 07:20:33 127.0.0.1 dmgtd: Apache Args in registry -d E:\PROGRA~1\CSCOpx\MDC\Apache
    Dec 22 07:20:33 127.0.0.1 dmgtd: PX_PROTOCOL in md.properties file is http
    Dont know if this means anything to you :-)

  • VM got stuck in "stopping" state, and cannot be stopped

    Dear all,
    I am using Oracle VM 3.2.2.
    One of my VM got stuck in "stopping" state, and cannot be stopped.
    How can I troubleshoot this problem...

    Q: Is the VM still running, i.e. can you ssh to the VM?
    Q: Find the server where the VM is running, and restart the ovs-agent, i.e. "service ovs-agent restart". Did this help, or is the agent crashed, any zombies?
    Possible root cause: These type of errors are typically ovs-agent bugs. First update oracle vm manager to the 3.2.4 release, not 3.2.6. Next update the dom0s to 3.2.4, not 3.2.6. You may need to setup a ULN 3.2.4 yum repo to update the dom0s. As you can see in these forms, 3.2.6 is may not ready for prime time, stick with 3.2.4, is stable.

  • Azure Cloud Service Stuck in "Stopping" state for a long time (12 hours)

    Does anyone have suggestions what to do with the issue I have. I tried to stop my Cloud Service the service is now basically stuck in "Stopping" State and been there over 12 hours. In my Cloud service there is 16 Virtual Machines I am using in
    testing.
    I tried to start Cloud Service but it also failed with error "Could not start the virtual machine deployment.".
    Is there something I could do or some way to get Microsoft Support (without paying extra)? I have "Visual Studio Premium with MSDN" so i have no other support but billing from Microsoft :(

    Managed to find the solution. I stopped and deallocated all the Virtual Machines. After that the Cloud Service status changed to stopped state. After that it was possible to start the Cloud Service again.

  • "CiscoWorks Daemon Manager" not running

    Hi Team,
    We had to restart the server in which we have installed Ciscoworks LMS. After that "CiscoWorks Daemon Manager" service is not getting started. Tried to stop all the ciscoworks related services and restart it, also tried restarting the server machine, but no luck. Could any one give me the solution to fix this problem. The error message is attached below.
    I am using Ciscoworks LMS Version 3.0
    E:\>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    E:\>
    E:\>pdshow
    ERROR: connect to dmgtd process on "127.0.0.1" on port 42340 failed:
    Error Line found in License.log file
    [ Thu Apr 09 13:10:46 IST 2009 ] [VBJ ThreadPool Worker id=25 se=iiop_tp scm=iiop_tp] ERROR com.cisco.nm.license.client.LicenseManager - Error in response: Unknown license handler: AALL
    Please do let know if I need to provide any further info.

    Below is the last two lines from NMSROOT\log\syslog.log. These lines are repeated many times in the log file.
    Apr 09 15:35:20 127.0.0.1 100: <28> dmgt[4916]: 2507(W):Daemon manager anonymous user has not been set up: 00000532
    Apr 09 15:38:01 127.0.0.1 100: <28> dmgt[5672]: 2507(W):Daemon manager anonymous user has not been set up: 00000532
    These are the only Error messages I can see in Windows Event Viewer for todays date.
    Error 1.
    Source: PerfNet
    Unable to read performance data from the Server service. No Server performance data will be returned in this sample. The error code returned is in first DWORD in the Data section. The IOSB.Status is in the second DWORD and the IOSB.Information is the third DWORD.
    Error 2.
    Source: Apache Service
    The Apache service named e:\PROGRA~1\CSCOpx\MDC\Apache\Apache.exe reported the following error:
    >>> [Thu Apr 09 15:35:13 2009] [warn] pid file e:/program files/cscopx/mdc/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run? <<<
    before the error.log file could be opened.
    More information may be available in the error.log file. .
    The file cscopx/mdc/apache/logs/httpd.pid contains only the value "1436"

  • LMS 3.2 CiscoWorks Daemon Manager does not want to startup in Windows Server 2008 64bit?

    I need help concerning the CiscoWorks Daemon Manager that does not want to startup.
    I keep on getting the Error 1053. I installed the CiscoWorks LMS 3.2 Evaluation.
    I just need the CiscoWorks Daemon Manager started up. I know a solution was posted but the link is invalid.
    This was the thread which I found:
    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cd47f8d/0#selected_message
    Could somebody please assist me in this issue.
    Thank You
    Irvin

    Try the below:
    1. Select Control Panel -> System and Maintenance -> System.
    2. On the left pane, choose Advanced system settings.
    3. Under Performance section, choose Settings.
    4. Click the Advanced tab.
    5. Under Virtual memory section, click Change.
    6. Clear the "Automatically manage paging file size for all drives" checkbox.
    7. Then Click Custom and specify at least 2048 MB for the min, and at least 4095 MB for the max.
    8. Confirm the services are setup correctly.  In Windows, go to Start and click on 'Run...'.  Type in services.msc and make sure you have the
    following services set like this, change accordingly if not:
    CiscoWorks ANI database engine: Manual
    CiscoWorks Daemon Manager: Automatic
    CiscoWorks RME NG database engine: Manual
    CiscoWorks Tomcat Servlet Engine: Manual
    CiscoWorks Web Server: Manual
    CWCS Cmf database engine: Manual
    CWCS rsh/rcp service: Automatic
    CWCS syslog service: Automatic
    CWCS tftp service: Automatic
    DFM dfmEpm database engine: Manual
    DFM dfmFh database engine: Manual
    DFM dfmInv database engine: Manual
    10. Reboot after and see if this brings daemons up.

  • Ciscoworks Daemon manager not starting

    Greetings,
    I have installed Ciscoworks vms ver 2.3 on a windows 2000 box and can start all services except the ciscoworks daemon manager. I have tried reinstalling and verifying permissions but still have the same problem. any ideas?
    Thanks

    Hi,
    maybe the user of Ciscoworks was erased or was disabled. Verify the status of the CW user on Windows. I guess the user is named casuser.
    Regards,
    Marco.

  • CiscoWorksLMS 4.0 - Service Ciscoworks Daemon Manager does not start

    Dear,
    After migrating a virtual machine that hosts the CiscoworksLms 4.0, Daemon Manager service does not start.
    From what we see this error seems to be a problem in the license.
    Following is the error:
    ERROR! The license file is invalid. Please click this link for information about Obtaining a valid license or purchase click here for current licensing information Otherwise, please contact your Cisco representative for purchasing information.
    I have already entered in the User casuse group of administrators and reset the password but no use Daemon Manager service not up
    Thanks for help!

    Hi,
    From the attached screen shots, I can see the startup type are Incorrect for Many services ,kindly correct their status...
    please see below the correct startup type
    configuration for LMS Services. As you notice you see that only the
    "CiscoWorks Daemon Manager" (except the RSH/Syslog/TFTP services) is set to
    start automatically, the Daemon Manager is responsible for starting all the
    other CiscoWorks LMS services in a specific order.
    So by having the below configuration, LMS will start correctly by itself
    after Windows successfully reboots. In fact having any other start up
    configuration will cause LMS to not start, because if one of the LMS
    services starts before it dependent services, it will not come up and all
    subsequent services will fail to start as well.
    CiscoWorks ANI database engine - Manual (if Campus Manager installed)
    CiscoWorks Daemon Manager - Automatic
    CiscoWorks RME NG database engine - Manual (if RME installed)
    CiscoWorks Tomcat Servlet Engine - Manual
    CiscoWorks VisiBroker Smart Agent - Manual
    CiscoWorks Web Server - Manual
    CWCS Cmf database engine - Manual
    CWCS rsh/rcp service - Automatic
    CWCS syslog service - Automatic
    CWCS tftp server - Automatic
    If DFM installed:
    DFM dfmEpm database engine - Manual
    DFM dfmFh database engine - Manual
    DFM dfmInv database engine - Manual
    If IPM installed:
    IPM Aging Server - Automatic
    IPM DB Server - Automatic
    IPM Naming Server - Automatic
    IPM PM Server - Automatic
    IPM Stopper - Automatic
    --Change the statup type Accordingly and then REBOOT the Sever and check the issue again..
    Thanks
    Afroj

  • BI Scheduler service stuck in stopping state

    Whenever I try to stop BI Scheduler service on my machine, it gets stuck in a 'stopping' state and I have to restart the box to get it to work again. When I look at the log, I see the following error.
    [nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call to WSACancelBlockingCall
    The environment is Windows 2003. If anyone has anyone faced this issue before, can you please share your solution?

    hi,
    No need to restart the box just Click on Task Manager-->Process-->NQScheduler.exe (search for this process) and click on End Process.Thats it and go back to services it will trun to Start mode...
    thanks,
    saichand.v

  • SMQ2 - Found a queue with name "*" and all other queues stuck in STOP state

    Hi all,
    We have a problem on the ECC side, on outbound asynchronous proxies. Sometimes a new queue appears on SMQ2 there with name "", and with status "STOP". At this time, all other queues stuck with STOP status... the only way of resetting all those queues to RUNNING state again is to delete the queue named as ""...
    Some of you has any idea how this queue "*" appears there and stop all other queues?
    thanks
    roberti

    Hi Ravi,
    Is not only about one queue stopped... the problem is this queue named ""... with status STOP, all other queues stops too with it. The only way to make things work again is to delete the queue named as ""... the problem is to discover what or who is creating this stupid "*" queue. I think that this is a procedural error on datacenter, but they are saying is not the case... I'm investigating, but if someone else has any idea about I would appreciate
    thanks!
    roberti

  • CiscoWorks IPM - collectors stuck in pending state

    I have IPM 2.6 running on ciscoworks, the first collector i created as a test worked perfectly and started running immediately.  Now when i've come to start the project proper to configure 400 collectors only 4 collectors show up.  Cisco's recommended collectors per ipm server is 1000 so i'm well within the figure.
    I even left it overnight thinking it might be database synching issues. Still can't find all the collectors, worst of all when i try to create new collectors it sees them as duplicates.
    The source device is reachable and the ipm process is running, any pointers please?

    Hi
    I also facing the same issues as you, User Entitlement Attestation process don't work.
    Did you able to fix it now ?
    Thanks in advanced
    Thanks
    John

  • Ciscoworks License Server/Daemon Manager is down.

    Hello,
    It seems i have a major issue with my Ciscoworks server.  Whenever i try to go to Netconfig, or inventory, or basically anything i get this error
    "License Server/Daemon Manager is down.  Please check license.log for more information."
    The license.log file doesn't show much, here is the last few lines
    "[ Tue Mar 01 12:01:03 EST 2011 ] [CS_License:LiceneServer-Thread-656] INFO com.cisco.nm.license.server.LicenseServer - Executing GetFeature
    [ Tue Mar 01 12:01:03 EST 2011 ] [CS_License:LiceneServer-Thread-656] INFO com.cisco.nm.license.server.LicenseServer - Got VMS features
    [ Tue Mar 01 12:01:03 EST 2011 ] [CS_License:LiceneServer-Thread-656] INFO com.cisco.nm.license.server.LicenseServer - Getting CMF features
    [ Tue Mar 01 12:07:10 EST 2011 ] [CS_License:LiceneServer-Thread-657] INFO com.cisco.nm.license.server.LicenseServer - Executing GetFeature
    [ Tue Mar 01 12:07:10 EST 2011 ] [CS_License:LiceneServer-Thread-657] INFO com.cisco.nm.license.server.LicenseServer - Got VMS features
    [ Tue Mar 01 12:07:10 EST 2011 ] [CS_License:LiceneServer-Thread-657] INFO com.cisco.nm.license.server.LicenseServer - Getting CMF features
    Can anyone assist with this please?

    The service was already stopped.  I did not stop it.  When i tried to start it it stopped striaght away... see below
    C:\>net stop crmdmgtd
    The CiscoWorks Daemon Manager service is not started.
    More help is available by typing NET HELPMSG 3521.
    C:\>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.

  • Ciscowork 3.2.1 daemon manager is not working after patch installation

    Hi Team
    Ciscowork 3.2.1 daemon manager is not working after patch installation.
    C:\Documents and Settings\Administrator>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    Also I checked syslog.log and it is showing below error
    an 17 14:39:34 127.0.0.1 100: <28>   dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
    Please suggest.
    With Regards,
    neena

    During installation, an user casuser is created with certian security settings and if those are modified\removed, DM will not start.
    Following message will be seen in /log/syslog.log
    Daemon manager anonymous user has not been set up: 00000775
    To solve the issue, run resetcasuser.exe located under /setup.support  to  recreate the settings.
    Make sure casuser account is not locked out. Make sure casuser is a member of casusers group and is set to "password never expires".
    Additionally you can try to make casuser a member of adiministrators group.
    -Thanks

  • License Server/Daemon Manager is down. Please check license.log for more information.

    I am having trouble with License Server / Daemon Manager when running LMS 3.1..
    I have looked through this forum and checked that the following services are set correctly to Manual
    CiscoWorks ANI database engine
    CiscoWorks RME NG database engine
    CiscoWorks Tomcat Servlet engine
    CiscoWorks Web Server
    CWAWFEngine database engine
    CWCS Cmf database engine
    DFM dfmEpm database engine
    DFM dfmInv database engine
    DFM dfmFh database engine
    OpxXMLRuntime
    I have triedshutting down the Daemon Manager and forcing the databases to close down (hoping that the transaction log might be the problem but so far no joy.. Was running okay for some months on Windows 2003 as a VM.
    Packages installed are as follows...
    Just about to give up and do a fresh install....any assistance would be appreciated.
    Many thanks, Peter.
    Name
    Version
    License Status
    Size
    CiscoWorks  Common Services
    3.2.0
    Licensed
    Not applicable
    Campus  Manager
    5.1.0
    Purchased
    100
    CiscoView
    6.1.8
    Licensed
    Not applicable
    CiscoWorks  Assistant
    1.1.0
    Licensed
    Not applicable
    Device  Fault Manager
    3.1.0
    Purchased
    100
    Internetwork  Performance Monitor
    4.1.0
    Purchased
    100
    Integration  Utility
    1.8.0
    Licensed
    Not applicable
    LMS  Portal
    1.1.0
    Licensed
    Not applicable
    Resource  Manager Essentials
    4.2.0
    Purchased
    100

    It looks like you're seeing CSCte49301.  Follow the release note steps to solve this:
    Symptom:
    The EssentialsDM daemon hangs in a Waiting to initialize state (as seen in the output of the pdshow command).  Additionally, one might see "Error connecting to JRM" in Resource Manager Essentials applications.
    Conditions:
    This occurs on Windows servers after the patch for KB968930 is installed, and only if the Windows Remote Management service was started prior to starting CiscoWorks Daemon Manager. 
    Workaround:
    Shutdown CiscoWorks Daemon Manager with the following command from the server's command prompt:
    net stop crmdmgtd
    Delete the following two files:
    NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry
    NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry.backup
    Restart CiscoWorks Daemon Manager with the following command:
    net start crmdmgtd
    If that does not work, then the Windows Remote Management service must be stopped, and disabled.  Then, CiscoWorks Daemon Manager must be restarted.

  • Cisco Prime LMS 4.1, "License Server/Daemon Manager is down."

    Hello,
    We having problem with Cisco Prime LMS running version 4.1.
    When open Home page shows the next message: "License Server/Daemon Manager is down. Please check license.log for more information." (see attached)
    The daemon server is stopped already and i can't restart it, see below:
    C:\>net start crmdmgtd
    The Cisco Prime Daemon Manager service is starting.
    The Cisco Prime Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    Thanks

    It looks like you're seeing CSCte49301.  Follow the release note steps to solve this:
    Symptom:
    The EssentialsDM daemon hangs in a Waiting to initialize state (as seen in the output of the pdshow command).  Additionally, one might see "Error connecting to JRM" in Resource Manager Essentials applications.
    Conditions:
    This occurs on Windows servers after the patch for KB968930 is installed, and only if the Windows Remote Management service was started prior to starting CiscoWorks Daemon Manager. 
    Workaround:
    Shutdown CiscoWorks Daemon Manager with the following command from the server's command prompt:
    net stop crmdmgtd
    Delete the following two files:
    NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry
    NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry.backup
    Restart CiscoWorks Daemon Manager with the following command:
    net start crmdmgtd
    If that does not work, then the Windows Remote Management service must be stopped, and disabled.  Then, CiscoWorks Daemon Manager must be restarted.

Maybe you are looking for

  • Multiple rows in table popin

    Hi Experts, I have a requirement to have multiple rows in the table popin, that is , having a table with multiple rows as the table popin. For further information, the exact requirement is , there is a table which will have one of the column containi

  • Where can i Download the Photoshop Generator plugin for reflow?

    I'm trying to export a design from photoshop to reflow, but the option is not available i only have generate image assets. I have gone into preferences and enabled generator under plugins but it's still not working. Any suggestions? I watched a few t

  • Sound Class in AS3

    I am still learning AS3, and I was woking with sounds. This was to be used to stop the cound assigned to the channel1 var. When I click the button the sound is just muffeled a bit, but does not stop playing. Does anyone know it there is an issue with

  • Problem obj Loader (resize)

    Hello, I have a problem loading several .obj File in a scene using the following lines: OjectFile f = new ObjectFile(); etc. etc. if I add the scenefile to the Scene Graph the object is not centered and strange positioning. if I use the following fla

  • Information on v$archive_gap

    How to find the archive log gaps in a 2 node RAC primary , 2 node RAC standby database. I know we can user v$archive_gap view for single instance data guard. But i am not sure whether this view is useful for 2node RAC primary, 2 node RAC standby setu