Ciscoworks: Device not appearing in Campus Manager

Hello,
I have added 3 new devices in CS and then create a group in RME then add the 3 devices in this group. Then I have run the credential check added devices in inventory and backup the configuration successfully.
Problem:
These devices are not appearing in the CM, In can see a new group but when I generate a User Tracking Report in Campus Manager, I am getting a popup saying "no end host found"
Device type are one 3750g-24ts switch and two 2611 routers.
I have restarted the services twice via net stop crmdmgtd; net start crmdmgtd, but no gain.
Please guide me that how I can make the devices appear in CM, there are many other devices already exist in CM. Also we only add devices manually, bot via discovery.
I am using
LMS: 3.2
CM: 5.2.1
RME: 4.3.1

I have run the Data Collection in Campus Manager 3 times but still unable to see the 3 devices in campus manager.
Also it seems that CM is talking with CS as for trial I have deleted 1 switch from CS and it also get deleted in CM & RME
Please advise any other solution.

Similar Messages

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • Second Task Server not appearing in the Manager

    I have set up a second Collection and Task Server (W2003 SP2) on a VM. The Collection Server is running fine.
    The Task Server does not appear in the Manager displayer, after refreshes (F5) and rebooting both the Manager and the new Collection/Task Server.
    Following some of the suggestions on this forum, he is my troubleshooting:
    1. I have a local account "ZAMadmin" on both servers that is a local admin account with full rights to the Filestore
    2. Only the TASKSERVER.exe is running; TASKSERVERCORE.exe is not
    3. I have uninstalled/reinstalled the Task Server.
    4. Port 7465 is NOT open when a TELNET 127.0.0.1 7465 (connect failed)
    Any ideas what to check?

    Originally Posted by pcwoodring
    I have set up a second Collection and Task Server (W2003 SP2) on a VM. The Collection Server is running fine.
    The Task Server does not appear in the Manager displayer, after refreshes (F5) and rebooting both the Manager and the new Collection/Task Server.
    Following some of the suggestions on this forum, he is my troubleshooting:
    1. I have a local account "ZAMadmin" on both servers that is a local admin account with full rights to the Filestore
    2. Only the TASKSERVER.exe is running; TASKSERVERCORE.exe is not
    3. I have uninstalled/reinstalled the Task Server.
    4. Port 7465 is NOT open when a TELNET 127.0.0.1 7465 (connect failed)
    Any ideas what to check?
    I entered a ticket with Novell Support $, and the issue revolved around installing the Collection Server, then installing the Task Server later on. I guess the "Component Install" isn't entirely true!
    Here is the scenario for anyone else with this problem:
    1. Second Collection Server installs and it grabs new DLLs for the Primary
    2. Task Server installs but can't start because of DLL conflict
    3. Reinstalling the Task Server does not overwrite the DLL, so the same problem
    The fix is stupid and simple:
    Install the Task Server to a new folder. Then it can install all of the DLLs including the shared programs
    I hope this helps someone else avoid misery!

  • Enrolling iOS devices "not shown in Configuration Manager console"

    After successfully enrolled my Windows RT I want to enroll my iOS devices (iPad 1 & iPhone 4). First step is completing the iOS configuration (uploading APN certificate). Next step I associated my devices by installing management
    profiles (https://manage.microsoft.com). All my application appears when starting the Company Portal App but my device will not appear in my Configuration Manager admin console.
    When I select the Support tile in the Company App it says "Name not yet available", I'm not sure if this is a normal behavior?
    Any thoughts/pointers are welcome.
    Regards,
    Ronny de Jong | inovativ.nl | Blog: donnystyle.wordpress.com | Twitter: twitter.com/ronnydejong

    Hi Jon,
    I've installed the iPhone Configuration Utility and collected the logging below as part of enrolling the iOS devices (iPad & iPhone) and installed the Management Profile:
    iPAD
    Feb 22 23:08:36 iPAD profiled[255] <Notice>: (Note ) profiled: Service starting...
    Feb 22 23:08:36 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-a-y-l-o-a-d-s-.-D-e-v-i-c-e-I-n-f-o -q-u-e-u-e-d -f-o-r -i-n-s-t-a-l-l-a-t-i-o-n-.
    Feb 22 23:08:37 iPAD Preferences[256] <Warning>: Splitview controller <PSSplitViewController: 0x24a900> is expected to have a master view controller before its used!
    Feb 22 23:08:38 iPAD Preferences[256] <Warning>: BTM: attaching to BTServer
    Feb 22 23:08:42 iPAD profiled[255] <Notice>: (Note ) MC: Checking for MDM installation...
    Feb 22 23:08:42 iPAD profiled[255] <Notice>: (Note ) MC: ...finished checking for MDM installation.
    Feb 22 23:08:43 iPAD profiled[255] <Notice>: (Note ) MC: Enrolling in OTA Profile service...
    Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
    Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Issued certificate received.
    Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Retrieving profile from OTA Profile service...
    Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Received final profile: Microsoft.Profiles.MDM
    Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Beginning profile installation...
    Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-r-o-f-i-l-e-s-.-M-D-M -i-s -r-e-p-l-a-c-i-n-g -a-n -e-x-i-s-t-i-n-g -p-r-o-f-i-l-e -h-a-v-i-n-g -t-h-e -s-a-m-e -i-d-e-n-t-i-f-i-e-r-.
    Feb 22 23:08:59 iPAD profiled[255] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
    Feb 22 23:09:00 iPAD profiled[255] <Notice>: (Note ) MC: Issued certificate received.
    Feb 22 23:09:01 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-r-o-f-i-l-e-s-.-M-D-M -i-n-s-t-a-l-l-e-d-.
    Feb 22 23:09:01 iPAD profiled[255] <Notice>: (Note ) MC: Removing certificate with persistent ID 69646e7400000000000000a2
    Feb 22 23:09:01 iPAD SpringBoard[51] <Warning>: Reloading and rendering all application icons.
    Feb 22 23:09:02 iPAD profiled[255] <Notice>: (Note ) MC: Removing certificate with persistent ID 69646e74000000000000009f
    Feb 22 23:09:02 iPAD mc_mobile_tunnel[260] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    Feb 22 23:09:02 iPAD mc_mobile_tunnel[260] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    Feb 22 23:09:02 iPAD mc_mobile_tunnel[261] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    Feb 22 23:09:02 iPAD SpringBoard[51] <Warning>: Reloading and rendering all application icons.
    Feb 22 23:09:02 iPAD mc_mobile_tunnel[261] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: mdmd starting...
    Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Looking for managed app states to clean up
    Feb 22 23:09:03 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
    Feb 22 23:09:03 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
    Feb 22 23:09:03 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
    Feb 22 23:09:03 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
    Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Network reachability has changed.
    Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Network reachability has changed.
    Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:09:11 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:09:11 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:09:13 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:09:13 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:09:14 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:09:14 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
    Feb 22 23:09:14 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
    Feb 22 23:09:14 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
    Feb 22 23:09:14 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
    Feb 22 23:09:16 iPAD mdmd[258] <Notice>: (Note ) MDM: mdmd stopping...
    iPhone
    Feb 22 23:23:22 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Checking for MDM installation...
    Feb 22 23:23:22 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: ...finished checking for MDM installation.
    Feb 22 23:23:24 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Enrolling in OTA Profile service...
    Feb 22 23:23:24 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:24  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:29  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
    Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:29  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Issued certificate received.
    Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Retrieving profile from OTA Profile service...
    Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:30  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Received final profile: Microsoft.Profiles.MDM
    Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Beginning profile installation...
    Feb 22 23:23:37 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:37  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:37 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
    Feb 22 23:23:38 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:38  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:38 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Issued certificate received.
    Feb 22 23:23:39 iPhone-van-Ronny SpringBoard[67] <Warning>: Reloading and rendering all application icons.
    Feb 22 23:23:39 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Profile Microsoft.Profiles.MDM installed.
    Feb 22 23:23:40 iPhone-van-Ronny mc_mobile_tunnel[1094] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    Feb 22 23:23:40 iPhone-van-Ronny mc_mobile_tunnel[1094] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: mdmd starting...
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Looking for managed app states to clean up
    Feb 22 23:23:41 iPhone-van-Ronny com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[1091]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
    Feb 22 23:23:41 iPhone-van-Ronny com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[1091]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Network reachability has changed.
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Network reachability has changed.
    Feb 22 23:23:41 iPhone-van-Ronny awdd[1092] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
    Feb 22 23:23:41 iPhone-van-Ronny awdd[1092] <Error>: CoreLocation: CLClient is deprecated. Will be obsolete soon.
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:23:45 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:23:45 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:23:48 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:23:48 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:23:49 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:23:51 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: mdmd stopping...
    Thanks,
    Ronny de Jong | inovativ.nl | Blog |
    Twitter

  • Cisco Unified Operation Manager: can not see the Campus manager

    Dear all,
    I have installed the CUOM to manage my IPT system. I have successfully installed without any errors. The system now can detect all IPT system components but I have a problem. From the Tool on Service Level View, I only the option for Alert History and can not see the option for Campus manager to customize the topology (like the tool on Ciscoworks LMS).
    Please give me some advices.
    Thank you,
    Thanh

    On the administration page, you will be able to see "View Reports For" header on the top.
    Under that header you will see the following fields:
    User ID/Type/Last/Status/Folder /Instance
    Above values will be used by PeopleSoft to filter and display the list of reports
    If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
    If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
    Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

  • Ciscoworks - devices "not configured in ACS"

    Hi all,
    Can anyone explain why Ciscoworks places some new devices in the above category even when the device config, ACS, etc is all configured correctly? I have a handful of devices that keep going into this category and there is nothing I can do to stop it happening - it is a real hassle as you have to then set CW to non ACS mode restart the daemon, delete the entries etc etc.
    If anyone can describe how I can get CW to manage such devices properly and possibly even tell me how to stop it happening in the future it would be of great help.
    Many thanks in advance (though I know some of you would rather have points ;-)
    Scott

    Hi Scott ,
    Device will  fall to " Devices not Configured in ACS " only  in 2 condition :
    1. Device is actually does not Exist in ACS
    2. It  EXist in ACS  with different IPADDRESS  or HOST NAME.
    There is no direct way to delete these devices once they are on the Not Configured
    in ACS list. However, one workaround is:
    Step 1. Create a dummy NDG group in ACS to include these devices.
    Step 2. Delete the devices in DCR and then in ACS.
    Note: In order to delete a device from DCR we need to follow this procedure:
    1.- Go to Common Services >> Devices and Credentials >> Reports >>
    Devices that are not configured in ACS and generate a report.
    2.- Now that we have all the devices that we want to delete, please go to
    Common Services
    >> Device and Credentials >> Device Management  and select all the devices
    from CS (Common Services database).
    3.- Click on Delete and a confirmation message will pop, agree to this.
    I hope this will help you
    Thanks
    Afroj

  • Sd card not appearing in file manager

    hi i recently bought blackberry z3 model..i inserted sd card but its not appearing file manager..please help me what do i do
    thank you,,

    What format? And how did you format?
    How about formatting the card using the BlackBerry?
    - Ira

  • IOS 5 Devices not appearing in iTunes 11.1.3 (8)

    I have 2 different iOS 5 devices that will not appear in iTunes 11.1.3 (8) on a Mac running Mavericks. One is a 4th gen iPod Touch and the other is a 1st gen iPad Wi-Fi + 3G. I have tried erasing the devices from the device and starting over, hard resetting, other cables, etc., but nothing works. Both are immediately recognized by iPhoto when they are plugged into the computer, but iTunes seems to hate them. Any suggestions would be greatly appreciated.

    Tried connecting my phone to iTunes running in a virtual machine and it worked fine. So whatever this error is, it's a problem with my computer. Any ideas?

  • Device not appearing in itunes

    Hello,
    When I conect IPAD to my Laptop using the cable, IPAD is not appearing under Devices of ITunes. s My OS is Windows XP (Service Pack 3). I also have IPOD and this shows when I connect to my Laptop. I tried to troubleshoot this problem in many ways as suggested under Apple Support webpage, but this problem is never resolved and so I finally landed up here expecting that someone would help me. Any help is appreciated. Thanks in advance.
    Thanks,
    Gopal

    I found this article using the search bar at the top if this page by Support:
    iOS: Device not recognized in iTunes for Mac OS X

  • Why does my device not appear

    My device does not appear. Why?

    Yes, I upraded the device, and in fact, restored settings.
    One device was attached at a time.
    It was connected through a hub. It worked perfectly before updating.

  • Application not appearing in Calculation Manager

    Dear All,
    I have created a new application on test environment, but it is not visible in Calculation Manager.
    Checked the application process, its the same i use to create applications previously.
    I have done the same for creating applications on multiple times with no issues. Any thoughts what can go wrong
    Note: A few days back the Calculation Manager stopped responding when we try to open the calculation manager through workspace we raised an Sr, Oracle support suggested to re-deploy the
    calculation manager configuration with database schema and increased the jvm xms size from Operating System Registry for calculation manager.
    Regards
    Ace

    Deployed with Default Application Group, And For Rules its deployed with calculation manager,
    we have done these all steps, but when we open calc manager to import business rules in new created application, it doesn't show us our new created application.
    While Planning shows newly created application.
    Regards.
    Ace

  • Msg_server.exe not appearing in SAP management console

    Hi Experts,
    First of all I want to tell you that I am new to BASIS activities. I am trying to learn installation and error handling.
    I have installed R3 Enterprise 4.70x 2.00 SR1 on Win SQL Server and everything was successful. Now when I try to start SAP from console, msg_server.exe does not appear in the process list and dispatcher status is u201CRunning but message server unreachableu201D. Also in WP Tables, I can only see two DIA processes.
    I can give you developer trace file dev_ms and dev_w0 for your reference if you need them.
    Thanks in advance,
    Brahma

    trc file: "dev_ms", trc level: 1, release: "640"
    [Thr 1240] Sat Jun 26 03:03:37 2010
    [Thr 1240] systemid   560 (PC with Windows NT)
    [Thr 1240] relno      6400
    [Thr 1240] patchlevel 0
    [Thr 1240] patchno    12
    [Thr 1240] intno      20020600
    [Thr 1240] pid        3740
    [Thr 1240] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3740) [msxxserv.c   1637]
    [Thr 1240] MsHttpInit: full qualified hostname = epgsupg
    [Thr 1240] HTTP logging is switch off
    [Thr 1240] set HTTP state to LISTEN
    [Thr 1240] *** I listen to port sapmsEUG (3600) ***
    [Thr 1240] *** HTTP port 8100 state LISTEN ***
    [Thr 1240] CUSTOMER KEY: >N1690537953<
    [Thr 1240] Sat Jun 26 03:04:14 2010
    [Thr 1240] MsHttpReadUrl: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
    [Thr 1240] MsHttpReadUrl: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
    [Thr 1240] Sat Jun 26 03:35:57 2010
    [Thr 1240] MsSExit: received SIGINT (2)
    [Thr 1240] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3740) [msxxserv.c   5188]

  • Ipod does not appear in file manager

    I have an iPad Mini running OS 7.0.4. I can no longer see this in File Manaager under Windows 7. yet iTunes is fine with it. Any ideas?

    When I try to restore it comes up with an error message (there has been a range of numbers). The I touch works, just not with itunes.
    Sometimes it recognises and tries to restore.  Other times it does not recognise. 
    I have read on a forum to change the letter assigned to a drive but I cannot see a letter assigned in the disk manager to be able to reassign.
    I have changed and reinstalled the Apple mobile device support .
    The problem seem to start after an update.
    I have spent hours trying to solve this, any advice would be great!

  • New SCSI drive does not appear in disk manager - what can I do?

    I am working on an older HP ML350G4 
    It has server 2003 installed.
    It has run out of memory, so I added another drive. I rebooted, and went to format it but !! not in disc manager.
    I cannot find it anywhere. There's no unrecognised devices in devmgr, yet it does not sghow up in disk manager either.
    Please give me some advice as to what I have done wrong/can do to get it up?

    Hi VW Crank,
    “I added another drive. I rebooted” are you installed the new disk then you can not found your system volume? It most possible is you need install the RAID array driver after
    you install the new server.
    The related HP support forum information:
    Accepted Solution need RAID drivers for initial OS installation
    http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/need-RAID-drivers-for-initial-OS-installation/td-p/1741863
    I’m glad to be of help to you!
    *** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
    Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
    completely understand the risk before retrieving any software from the Internet. ***
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Successfully enrolled devices not showing in profile manager

    On a newly installed (from scratch, formatted etc) Mountain Lion server, I'm having an issue where I can successfully enrol a device, an iPhone with 6.1 iOS in this case, but the enrolled device does not show up in the devices?
    I see a previous post in these communities with a similar issue, the solution was to add place holders after the device was enrolled, unfortunately this is not a solution for me, as soon as you re-enrol the placeholder dissapears  I have another server running mountain lion at another site and this is working just fine.
    Any solutions?  I'm pulling my hair out with this.  I have a niggling feeling that with the other server I had a similar problem when I upgraded to Mountain Lion and had to edit one of the ruby files in the profilemanager to display the devices but I can't remember where or when
    Regards,
    Stephen...

    ok update to this problem:
    If I enroll a Mac device, in this case the mini server itself then these are displayed under the device library.
    also tried an iPad with iOS6 and this was successful, and displays in the device library. 
    Currently the iPhone is not displaying although enrolled successfully is an iPhone4 so I'm going to experiment with a few other devices and see whats happening

Maybe you are looking for