Ciscoworks -- hum report issue
Hi All,
I came across a strange issue recently and now i am in the middle of finding the possible causes..
The problem is exaplained as, we have 90 devices added to DCR and the same in HUM database. Out of these, 15 devices devices did not come in the daily availability report on 1st and 2nd August. But Other devices were reflecting properly and from 3rd onwards, automatically all the devices started reflecting in the report, including that 15 device. The devices include switches and routers.
Then, on 3rd i tried to take a manual device availabilty report of the date range as 1st till 2nd august. There it came properly and all the devices were there on those 2 days.
Hence ruling out the possibility of inexistence of snmp-hum database during the time.
Can somebody guide me what are the possibilities. I do not need a resolution but need on the possible causes.
According to me, it might be that some other jobs are running during the time, but i can say that snmp polling failed, because the device availability report we could generate it on the next day.
Hi Afroz,
It is failing for only HUM reports..
i created a poller and tried to create a job and report after 30 mins, but it was empty.
this issue is for only 3 switches. Rest of them are working fine. im trying to get the quick report of this switch for the first time.
i have deleted and added the device in common services, but stil the same problem.
then i restarted the services., still same issue..
one of the switch is 4510 switch with version cat4500e-universal.SinPA.03.04.00.SG.151-2.SG.
another same series of switch with security license cat4500e-universalk8.SinPA.03.04.00.SG.151-2.SG, is working fine.
Similar Messages
-
High cpu utilisation while generating HUM reports
Hi
i am facing the issue that while generating the HUM reports the CPU utilisation going to 100%. i am using HUM 300 + LMS 100. right now i am using 2GB RAMyou're right. i forgot that i made some changes to my igoogle page. the chat function is the culprit. adding it causes the spike. i've reported the problem. thanks for the help!
-
Hi,
I have run a stage analysis report but it says no data inspite of open opportunities being present in the system. Could anyone kindly let me know what could be the issue?
Regards
SharatHi Sharat,
Welcome you to the forum. Please close your first thread.
Regarding your Stage Analysis Report Issue, what selection has been made? This report show closed opportunity only.
Thanks,
Gordon -
1. 30 documents of 2009 were matching and post with clear is perfomred. After performing post with clear also the line items are not moving from open line items. When we download the open line items as of today, these line items are appearing.
2. When we download the ZBLRFIOI report for GRIR a/c 349100 to have the opne line items. we have some set of documents showing as " FI Open items without J2" - This is reporting issues.
Thanks
MallikarjunaHi
Pls try with F.13 for that GR/IR account 349100 by selecting check box select gl accounts
And give Company code, year and pending document numbers in selection screen
And before that pls make sure that OB74 clearing settings maintained or not
It will clear all the open items exists
Reg
Vishnu -
Hi,
I am facing one reporting Issue relating to Display Attributes.
Characteristic: Business Partner
Display Attributes: Address0, Address1, Address3...etc.
Requirement is to display mentioned Display attributes along with Business Partner.
For this I have selected Business Partner as characteristic and mentioned above three as display attributes to Business Partner.
But Query out put is not showing Display attributes. For this I have done all settings at reporting level, all gone vain.
I am using Bex 7.0.
Kindly look in to the Issue and let me know the solution.
Regards,
Venkat.Mahipathi.
09886652422.
[email protected]Hi,
Check in Reporting properties or check attributes in analyzer proprties then it will display
************asign points if usefull***********
swapna -
User report issues in 1.1.0.21.97
A couple of issues i'm experiencing with user reports on Mac OS X in the latest pre-releas build
first off, if I am asked for a password (first time I use the connection) there is no feedback if the connection fails (worng password for instance)
The second problem I'm facing is every time I try to rerun a certain master-detail report I'm getting an NPE
this is the stacktrace:
22-nov-2006 15:37:31 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
22-nov-2006 15:37:33 oracle.dbtools.raptor.controls.display.DisplayResultTable getUI
INFO: DisplayResultTable.getUI()
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.report.addin.ReportEditor$1.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5554)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5319)
at java.awt.Container.processEvent(Container.java:2010)
at java.awt.Component.dispatchEventImpl(Component.java:4021)
at java.awt.Container.dispatchEventImpl(Container.java:2068)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3936)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
at java.awt.Container.dispatchEventImpl(Container.java:2054)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
reloadBuffers(): 53 nodes checked in 0.006489 second(s)
reloadBuffers(): 53 nodes checked in 0.005422 second(s)
reloadBuffers(): 53 nodes checked in 0.004306 second(s)
22-nov-2006 15:43:17 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
only happens with master-detail report
Message was edited by: Barsema
barsemaWe have verified the connection error on the latest evaluation build is working as expected. i.e. if you supply wrong password you get alerted to that. This has been verified on the windows and Mac OS X. Please try the latest evaluation release 1.1.0.22.71.
Your reports issue has also been addressed.
Sue -
Is there any SAP standard HUM report
Hi Guys
Is there any SAP standard HUM report
which can have the fields like Contents of HU field and HU identification2 field
Please help
Thanks in advanceHI
Run T code HUMO -
Update 3/22 - the below issue has been resolved.
It has come to our attention that certain Windows Phone download reporting aggregations are not matching. After investigation, we found an issue related to 11/1/14 – 11/9/14 transactions. For example, if you chose an “All
app” aggregation (6 month view) and compared it to “Monthly by app” aggregations (6 month view), the totals weren’t matching. The root cause of the issue was due to the 11/1/14 – 11/9/14 data not being considered for all of the available aggregations.
We are scheduled to fix the issue today.
If you have transactions between 11/1/14 – 11/9/14, you will see an increase in the following aggregation totals once the fix is completed:
Monthly aggregations (6 and 12 month views) by app and in-app aggregations
Cumulative downloads – app and in-app aggregations
Please note, this is strictly a download reporting issue. There is no impact to any payout reporting or payout amounts.
When the fix has been completed, I will update this post.
Thanks,
PatrickUpdate 3/22 - the below issue has been resolved.
It has come to our attention that certain Windows Phone download reporting aggregations are not matching. After investigation, we found an issue related to 11/1/14 – 11/9/14 transactions. For example, if you chose an “All
app” aggregation (6 month view) and compared it to “Monthly by app” aggregations (6 month view), the totals weren’t matching. The root cause of the issue was due to the 11/1/14 – 11/9/14 data not being considered for all of the available aggregations.
We are scheduled to fix the issue today.
If you have transactions between 11/1/14 – 11/9/14, you will see an increase in the following aggregation totals once the fix is completed:
Monthly aggregations (6 and 12 month views) by app and in-app aggregations
Cumulative downloads – app and in-app aggregations
Please note, this is strictly a download reporting issue. There is no impact to any payout reporting or payout amounts.
When the fix has been completed, I will update this post.
Thanks,
Patrick -
Odd Reporting Issue (ENTERPRISE)
I have a client with some users experiencing a rather odd reporting issue. The report runs fine, but only shows values for the totals and not the line items that make up the total.
For example, when I run the report (logged in as admin as well as under their ID), I see:
Net Sales 1,234
Cost Of Sales (1,111)
Gross Margin 123
When they log in on their machine, they see:
Net Sales
Cost Of Sales
Gross Margin 123
Very odd. I figured maybe it was an application setting, but the INI didn't look off anywhere particular.
They are running Enterprise 6.3.1 (yeah, insert comment here on the upgrade needed).
Any thoughts???Check their Effective rights, and reset them, that has worked out for me. Otherwise, try copying the user and paste it as a new user and retest; I had to delete users and recreate them to correct problems of this nature.
-
Sentinel 6.1 will not parse my feed from Ciscoworks. All network syslog
data is collected by ciscoworks and stored in a file syslog.log. This
file can be pulled by the collector manager as a file source or pushed
via Snare to the collector mgr.. the data cannot be parsed using either
method using standard Cisco Collector (Cisco IOS Router xx Cisco Switch
and Router 6.1r2).
Is there a working collector or do I have to build one?
eisensee
eisensee's Profile: http://forums.novell.com/member.php?userid=98444
View this thread: http://forums.novell.com/showthread.php?t=425629OK, hmm...
1) At issue is more likely the Collector version, not so much the
platform version. The old Collectors made an attempt at correcting some
weird syslog formats, but the feature ended up being too confusing and
error prone for us to support. The new Collectors only support proper
RFC-compliant syslog, for a number of reasons which we can get into if
you like.
2) I may be wrong, but I believe a customer told me that latter-day
versions of CiscoWorks introduced a syslog forwarding option. I poked
around on Cisco for a bit, but there are hundreds of specific products
with the 'CiscoWorks' label so I don't know what applies.
3) OK, so here's the deal. RFC-compliant syslog message are constructed
as:
MMM DD HH:MM:SS hostid message
The original message from your switch should look something like:
Nov 11 15:30:17 172.253.248.33
\/\/426174\/801DF193ED75\/CCAPI\/cc_api_call_connected:
It actually looks like (guessing a bit, here:
Nov 11 15:30:17 172.253.248.33 2182635: 418971: Nov 11 15:30:14.739:
\/\/426174\/801DF193ED75\/CCAPI\/cc_api_call_connected:
Which indicates that a couple numbers and another timestamp are being
injected into the "message" portion. May or may not be an issue, if the
Collector handles it that way - review the Collector doc for proper
configuration details.
But then your Epilog gets a hold of the message, and inserts *another*
header:
Nov 11 15:30:54 10.101.251.4 sm-ciscowks.smad2.savemart.com\t\t0\tNov
11 15:30:17 172.253.248.33 2182635: 418971: Nov 11 15:30:14.739:
\/\/426174\/801DF193ED75\/CCAPI\/cc_api_call_connected:
This violates RFC3164 in a number of ways, namely:
- it's not supposed to modify the original message IN ANY WAY if it's
already a proper syslog message (of course, Epilog may assume it's NOT a
syslog message, since it's in a file)
- It's using a fully-qualified hostname in its header, which is NOT
VALID
- There are tab characters after the header, which aren't proper syslog
characters
If I couldn't configure Epilog to not be stupid, what I would do is
create a little 'custom.js' script, and define my customerPreparse()
method to strip off the entire ugly Epilog header, something like:
Record.prototype.customPreparse = function() {
this.s_RXBufferString =
this.s_RXBufferString.substr(this.s_RXBufferString .lastIndexOf("\t"));
(You may need to do the same thing to rec.s_Body as well, and note that
I haven't tested this code at all!).
Then just follow the normal process to inject custom.js into your
Collectors, set the Execution Mode to 'custom', and you'll be up and
running.
NOTE: the major thing that Epilog is breaking here, however, is not the
Collector - the Syslog Connector also does some minimal parsing of the
input and will automatically create Event Source nodes based on the
syslog header. The syslog header is supposed to list the hostid of the
ORIGINAL event source as it's second element (after the timestamp), and
by injecting the ciscoworks device hostid, Epilog breaks that (in our
parlance, that's the Reporter, not the Observer).
If you look directly at the file on the CiscoWorks device, what does it
look like? Everything after the \t\t0\t in the sample you sent?
You might ditch Epilog entirely and use something like tail -F or
'netcat' instead, which won't add silly stuff to the messages.
DCorlette
DCorlette's Profile: http://forums.novell.com/member.php?userid=4437
View this thread: http://forums.novell.com/showthread.php?t=425629 -
Open PO Analysis - BW report issue
Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM DOC_ITEM DOCTYPE COMP_DEL
650000001 10 UB X
650000001 20 UB X
650000001 30 UB
650000001 40 UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampathHi Priya and Reddy
Thanks for your response.
Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No. Doc.No. Item Processkey Rocancel Elikz
41 6500000001 30 11 X ---
42 6500000001 30 11 --- X
43 6500000001 30 10 X ---
44 6500000001 30 10 --- ---
(Here --- means blank)
Thanks and Regards
sampath -
S_ALR_87012178 Report -Issue Related to Interest calculations
Hi,
When we run a customer open item analysis S_ALR-87012178 we see that there looks to be interest for overdue balances showing on the report. It doesn't appear to be assigning the interst to the customer, but I wanted to see why this was here and if we have the ability to assing interest to balances. And also where you would turn this on and off in the system or for a customer.
Kindly adivce me on this issue.i am confused because i didnot understand what they are asking.
Thanks
SunithaHi,
You can go to F.99 in order to see all the reports for Customers.
Hope you will find the best suitable report.
When you are using "Drill down reports" do not forget to select
"Object list (more than one lead column)" this would give you a option to sort them the line items as you want.
Just for your information: SAP1 is the transaction code for all the reports in SAP.
Regards,
Ravi -
Report issue on Virtual cube with services
Hi,
I'm following a how-to document to report on a virtual cube using a custom function module and everything seems to be OK except it is dumping at the following line which is included in the How To document "How Tou2026Implement a virtual InfoProvider with Services".
Both <l_s_data> and E_T_DATA are of same data types as discussed in the how-to document.
append <l_s_data> to E_T_DATA
These are the declarations which are same as HowTo document
E_T_DATA TYPE STANDARD TABLE
FIELD-SYMBOLS: <l_s_data> TYPE ANY.
Did any one face this issue. Greatly appreciate any insight into this issue. We are on BW 3.0B.
the dump i'm getting is ...
Data objects in a Unicode program are not convertible.
Error analysis
The statement "MOVE src TO dst" requires the operands "dst" and "src" to be comvertible.
Since this statement occurs in a Unicode program, the special convertibility rules for Unicode programs apply.
Thanks,
Hari Immadi
http://immadi.com
SEM BW AnalystHi,
In the debugging this is what I found out.. Any further insight?
Virtual cube has only 1 characteristic Z_CRNUM & only 1 keyfigure Z_SR
Report has only Z_CRNUM & Z_SR
<L_S_DATA> has following record & value
component type length contents
K____504 P 9 1.000
S____504 C 18 16EA4D-R
K____504 is the technical name of Z_SR in virtual provider.
S____504 is the technical name of Z_CRNUM in virtual provider.
E_T_DATA (type standard table) has following structure with a total of 5 fields.
S____504 K____504 &KEYEND 1ROWCOUNT Z_SR
Regards
Hari Immadi
http://immadi.com
SEM BW Analyst -
Hi,
We have customized a report (XML Publisher) in which our template is in XSL format.When using this stylesheet (.XSL) to print out PO's, there are some problems with the page layout, more specifically regarding the page breaks:
1) Extra empty page is printed - can this be avoided?
2) If the entire line block does not fit on the page, the line should be completely shifted to the next page (called "widow and orfan control" in MS Word) ?
How to avoid these issues? Replies will be appreciated.
Thanks,
SumirHi,
We have customized a report (XML Publisher) in which our template is in XSL format.When using this stylesheet (.XSL) to print out PO's, there are some problems with the page layout, more specifically regarding the page breaks:
1) Extra empty page is printed - can this be avoided?
2) If the entire line block does not fit on the page, the line should be completely shifted to the next page (called "widow and orfan control" in MS Word) ?
How to avoid these issues? Replies will be appreciated.
Thanks,
Sumir -
Hi gurus- I run the AP Trial Balance report and have an issue that I cannot reconcile with my raw data because when I export into excel, the invoice number is cut off after 20 characters. This client has long invoice numbers. Is there any way to get the SQL for this report and run it separately so I may see the invoice numbers and reconcile? Thanks a lot.
Hi,
Please check note:553484.1, there are some queries provided to check the TB data like queries to compare XLA and GL data.
Hope it helps
Maybe you are looking for
-
IPod not recignised as a device in iTunes, although in Windows
I have two problems (which are possibly linked). (1) In iTunes when I connect my iPod, the 'Device' option does not come up. I have tried several times, but nothing. The iPod just charges. So I cannot copy music into my iPod this way. For info, I hav
-
Duplicate photos in "Collections" after installing IOS 7
After installing ios7 yesterday, each automatically newly created photo "collection" contains some duplicate photos. How do I delete dups without deleting the originals that I of course want to keep? I tried to delete one as a test, and got a message
-
Receiver is not receiving entire email
My emails are not be received in full and my attachments are blank when received. HELP
-
I have the new iPad3 with Verizon. I am constantly having problems trying to connect to 3G. I had no problems like this with my older iPad and AT&T as the carrier. In fact, I find that if I cannot connect via Verizon, I can pick up my original iPa
-
Rescue and Recovery restore does not work because of incorrect display size
I am unable to restore my system when booting Rescue and Recovery from the Service Partition or DVD. R&R configures my monitor resolution as 640x480x16 but displays as if there we many more pixels available. The result is that only a portion of the s