Ciscoworks LMS 2.5 don`t working software & devices updates

Terrible happened The old server with LMS on the Solaris operating system refused to work, but I have backup. I installed LMS 2.5 (CiscoView 6.1.2), RME 4.0.3. Posted all network objects that were in the old system from backup. But none of them can not do in the utility Netconfig, all the checkbox on the switches Cisco ME 3400-24TS-A inactive, butwith the Cisco 3750 is no such problem, it works. As I understand it, I must run Device Update, but the answer is a "No updates available in CCO for selected product (s)." The same problem with Software Update, I can not upgrade to LMS 2.6 and other products too. Tell me what to do? Some screenshots attached below.

Maybe Cisco has stopped maintaining the online update repositories for LMS 2.x. Alternatively, you can try finding the relevant RME/CiscoView/Campus Manager device updates at
http://www.cisco.com/cisco/software/navigator.html?mdfid=268439477&i=rp
For example, select RME, instead of LMS, to find if the RME device pkgs are available for download. Once downloaded, you can apply them on the LMS servers locally.

Similar Messages

CiscoWorks LMS cannot add PIX/ASA in software repository

Hi,
I can see that LMS in RME Software Management cannot add PIX/ASA software saying not supported.
Any configuration issues.
I have got another problem. CiscoWorks LMS need to download IOS on cisco router, the process fails in RME Software Mgt. But the LMS is nated when it goes through the router.
i guess the script does not know the natted ip when running it on the router. If there is a way that I can specify the natted IP of the LMS. Fortunately, it is a nated static IP.
Thanks,
Ashley

Hi Joseph,
It is working fine. My mistake, issue with TFTP source interface.
However, I had got a small issue.
I have got a cisco router which RME accesses with ip natted ip, which you have indicated and It is working fine with RME. RME can manage the router perfectly.
However, DFM is leaving this router in questioned mode. So, the SNMP Credentials must be ok since it is good with RME.
Do I have to specify the Natted DFM ip as well for this router? Or something else must be done.

Ciscoworks LMS 3.2 unable to run Software or Device Update

I am not able to run software or device update. Initially I thought it was my proxy (Bluecoat) problem. so I bypassed the proxy and still getting the same error. based on the PSU.log, I am getting 404 error which ususally HTTP Not Found. I am wondering if the URLs have been moved? I've attached a sample of TCP stream in plain text.
with proxy credential:
[ Mon Mar 05 18:56:20 PST 2012 ] INFO   [SwUpdateAction : selectAllUpdates] : Validated Cisco.com credentials..
[ Mon Mar 05 18:56:23 PST 2012 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=404, RespMsg=Not Found
[ Mon Mar 05 18:56:23 PST 2012 ] ERROR [RemoteRepSync : downloadPsuHeadersAsXml] : VDSException thrown com.cisco.nm.xms.vds.VDSException: CcoDownloadAdapter::getfileList():failed to connect to Cisco.com.
[ Mon Mar 05 18:56:23 PST 2012 ] INFO   [SwUpdateAction : selectAllUpdates] : removing SwUpdateLock, due to exception..
bypass proxy:
[ Tue Mar 06 14:57:24 PST 2012 ] INFO   [SecurityHandler : getCSProxyLogin] : No proxy User Name configured
[ Tue Mar 06 14:57:27 PST 2012 ] INFO   [SwUpdateAction : selectAllUpdates] : Validated Cisco.com credentials..
[ Tue Mar 06 14:57:27 PST 2012 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=404, RespMsg=Not Found
[ Tue Mar 06 14:57:27 PST 2012 ] ERROR [RemoteRepSync : downloadPsuHeadersAsXml] : VDSException thrown com.cisco.nm.xms.vds.VDSException: CcoDownloadAdapter::getfileList():failed to connect to Cisco.com.
[ Tue Mar 06 14:57:27 PST 2012 ] INFO   [SwUpdateAction : selectAllUpdates] : removing SwUpdateLock, due to exception..

it seems, your problem is bugID CSCto46927; you can download the patch for windows here: cwcs33x-win-CSCto46927-1.zip
Also, consider to update LMS 3.2 to version LMS 3.2.1 and apply alls other application patches and point patches available;
LMS 3.2 SP1:
          ciscoworks_lms321_win_k9.zip

"Archive" and "View" buttons don't work after folio update

Hi all,
I have a subscription to the professional edition and I have built a custom viewer app for Android. I have built about 10 folios and at first download all is ok, the folios are displayed without problems and the app works fine except for one issue: "Archive" button don't work, when I tap on it, near folio cover, nothing happens, the folio does not disappear from folios list.
But the serious problem occurs when I perform a folio update from Folio Producer ('Update content' from adobe dashboard DPS): both "Archive" and "View" buttons stop working, nothig happens when I tap tap on them and I am forced to uninstall and reinstall the application on tablet (.apk file) to see folio changes in my custom viewer.
This is very annoying as well as time expensive.
Tablet is Samsun Galaxy Tab SII with Android 3.2.
Any help is appreciated.

To the best of my knowledge, the SII is a smartphone and not a tablet device, and the official claim is (correct me if I'm wrong) that DPS on Android is corrently tablet only.
Anyway, it seems strange to me so checked and found out that even though the DPS apps are not available when you search for them in the Play Market of a smartphone you can still force load them to the phone and run them.
I've done it on both a Samsung SIII running Android 4.0.4 and a Samsung GT-I9070 running Android 2.3.6 (I currently don't have a device running Android 3.2)
The interface is so small that it's hardly possible to use it, but it works.

Wireless keyboard function keys don't work even though updated

Hi,
like i read in different threads, many others had this problem too.
The function keys of my bluetooth keyboard (aluminium 2009) don't work even though i did firmware update for mighty mouse AND the keyboard firmware update. I also unset the option 'use function keys with fn......' option in system preferences. I also tried disconnecting and connecting the device. In system profiler the entry says it is (still) firmware version 80.
What can i do?
I'm thankful for any hint.
Best, Jörg

wrote this in another thread, but it is relevant here, too.
Wanting to buy a keyboard and reading this thread (and others), I went to a local Best Buy. They had quite a few of the wireless keyboards out. They had MC184LL(A) models and (B) models.
ALL of the (A) models worked perfectly with the iPad (typing, brightness, volume, ipod functions, etc).
NONE of the (B) models worked other than basic typing.
They had a stack of maybe 50 new wireless keyboards on the shelf. All but two of them were (B) models.
I bought one of the two (A) models. It is working perfectly on my iPad.
Rob

Few apps don't work after Anna update

I got a new N8 recently (my last one was stolen, insurance covered most of it though) but with the same product code and everything. Of corse, it didn't come with Anna pre-installed (it actually came with PR1.0 and I remembered how horrible the phone used to be). However, I updated to Anna with Ovi Suite without problems but I had a few weird experiences with the additional 1/2 and 2/2, for instance, when the phone found these updates it said that they were about 30-40 kB which obviously is wrong, and it took a while to install them. Then later I got them both again but this time they had the right size. 1/2 installed without problems but I had to try with 2/2 several times before it (")worked(").
Anyways, some apps like fMobi (pay-version) and the swedish app for public transportation don't work anymore. Don't know if they did on my last N8 after update. The additional updates were supposed to fix some non-working apps but it certainly isn't that way with my N8...advice please?

Just to point out that the fMobi stopped working in my N8 too after the update.
Uninstalled and reinstalled no end.
But I found that if you go to the fMobi facebook page, he say's that wiith the new controls put in by facebook, it has somehow messed up the App. Check his page out and see what he says.
Jurassic Park, Sam Neill to Dickie Attenborough " Mr. Hammond, the phones are working !"
N8-00 Tesco UK 059C951, Lumia 920

IMac stuck in home screen - mouse & keyboard don 't work after Apple Update

I just updated my iMac by hitting the Update button in the left upper screen.
After collecting 98.1 Mb of Update-tools i had to restart my iMac.
During shutdown it installed the components, as normal.
Once restarted, it brought me back to the home screen, where everything looked
normal. Problem is, that the iMac doesn 't respond to my mouse and keyboard anymore. Cursor is left of the apple in the left upper screen and doesn 't move an inch.
I discovered during a couple of restarts, that immediately as the apple appears in the white screen ... that Caps Lock modus is switched on. I am not able to switch it off.
Who knows what's wrong ? Please don t tell me to use my OS Tiger cd's .. because i later installed proper Leopard version, but these cd's are not with me at this moment.
HELP !

Hi !
Well, it is the wired keyboard and wired mouse. I tried as you told me,
but up untill now there 's no difference and everythings' still stuck ..
I tried the hardware test that you can do with CD 1 .. and everything
seems to work fine. At that point ( after startup hold D-button ) you can
control both mouse and keyboard.
When you then choose for startup from Mac OS Hardrive ... the whole problem
starts again. Caps Lock is ON ( green light ) from the moment you enter the
home screen.
The problem i have is that the original cd's that came with this imac intel duo core .. are OS Tiger. A friend of mine clean installed Snow Leopard 6.1. so i can t reinstall on a short term. I also would regret it if all my files would get lost.
Thanks for your quick respond. Please help me out !
Roger

Satellite U500-1F5: eco and FN buttons don't work after BIOS update

Hi everyone,
I hope i can find a solution for my problems in here.
I bought a new Toshiba Satellite U500 (PSU9ME),
I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.
Last week I received an alert to updat the BIOS and i did it. since then i noticed the following problems:
1. eco utility is not working, and when i tried to uninstall it it says (BIOS unsupported)
2. the on screen funtion buttons that appear on the top of the screen when you press the Fn button does not apear anymore
3. the touchpad lock and unlock button does not work and even pressing Fn+F9 doesnot lock it
I hope u can give me an answer regarding my problems,
I already downloaded the latest updates for the eco and value added packege from toshiba site and installed them,
BUT
didnt solve any of my prob
still eco utility is not working. The msg (unsupported BIOS), appear when i run the update.
The function buttons bar on the top of the screen not working ( even after i uninstall the toshiba value package and re-install the latest one) and the touch back lock/unlock button also is not working.
I hope Toshiba can find me a solution, coz I dont have the time to go the service center
Model U500-1F5 PSU9ME00D00XAR
Windows 7 (64)
Thanx in advance

Hello
At first just one comment:
*I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.*
Thats nice but definitely not necessary. When the system runs well, don't touch or change anything. Maybe sounds stupid now but I recommend you to remove TEMPRO from the system. Believe me you don't need it. I have 2 years old Satellite A300 and still original BIOS. It runs perfectly and I don't want to make risk and change anything. Since last month I have Satellite U500-1EX and will do the same. Tempro is already removed and I am happy with factory settings.
All you have done is OK but at least you can try to reinstall whole OS now using HDD recovery option (F8 at start-up) to see if everything will works well again. sorry but if this will not help I think you need BIOS downgrade to old version.

WIndows 8.1 app tiles don't work since window update on 12/14/14

My computer with windows 8.1 went through several updates on 12/14/14 and now none of my window tiles will open and several are now missing. I tried to install them again, and it says go back to the app store and install them again. It doesn't work. I
tried. Any ideas? I've restarted the computer several times, still not working. Several tiles are there, but are blank now. Any help would be great. Thanks

Hi Karens23,
Till now there is no report or same case about Windows 8.1 App issue caused by update 12/14/2014.
Since Windows 8 will need to be activated before the Store and apps will work. You will need to either be signed in to Windows 8 or the Store with a Microsoft account to be able to use an app that uses a Microsoft service. So please make sure your Windows
activation state is still activated and Sync your app license again by using following steps.
Step 1: On the Start screen, tap or click Store.
Step 2: Swipe in from the right edge of the screen, and tap Settings.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Settings.)
Step 3: Tap or click App updates.
If you haven't signed in to the Windows Store, sign in using your Microsoft account.
Step 4: Tap or click Sync licenses.
If syncing the app license doesn't help, press
Win+R. Enter wsreset then click OK, In Windows 8.1 the store will simply open.
It resets the Windows Store without changing account settings or deleting installed apps
Then Check the following Registry Key by pressing
Win+R enter “regedit” click “OK”
( HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppModel\Repository\Packages)
Right click Packages select “permissions” and make sure
SYSTEM has all the following Rights checked:
Full control(allow)
Read(allow)
Special permission(allow)
If the issues persists, we recommended running Apps troubleshooter on your computer and see if it could find and fix this issue. You also could restore your system to a earlier point before 12/14/2014 or uninstall these
updates manually from control panel to see what happens. Then try update again.
About App troubleshooter:
You can download Apps troubleshooter from:
http://go.microsoft.com/fwlink/p/?LinkId=268423
If you're still having trouble with the app after you running it, please upload the troubleshooting result and we will help you according to the results.
Regards,
DiWunewfolder

Links that use Javascript don't work after I updated Java; can I revert to earlier version?

I use private messaging to communicate with my doctor. I've always clicked a link ("Private Messaging") which opened a Java (Javascript?) window that displayed my messages and allowed me to write a message. A couple of days ago a message popped up saying that an update was available. I installed the update, now that link won't work. It is very important that I be able to access those messages, making this problem urgent. If anyone has any suggestions, I would greatly appreciate it!
(I did the Java check recommended on the Mozilla website, and it shows that Java is working and up to date)

You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Firefox uses the about: protocol to access built-in about: pages that you can open via the location bar just like you open web pages.
*http://kb.mozillazine.org/About_protocol_links).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Multiple issue: Newly created passwords don't work/ can't update apps.

My issue is more with my apple i.d. than with my devices, which are an ipad 3 and an iphone 4 (will be upgrading soon). A few weeks ago, an icloud message popped up asking for my password. When I entered my password, it didn't work. I tried my password in several other places and it wasn't working, so I went into iForgot and changed it. It still wasn't working, so I tried changing it again, still no luck. This cycle continued for some time, recreating my apple id password over and over. I am using the same apple i.d. that I was before, but I had to change my gamecenter id, losing access to some games. My biggest concern is that I can get into the app store to see my account, but I can't update apps on either device. It doesn't say that I have the incorrect password, try again. It just does nothing. When I look at my account settings, I see that there is a password already in place (a previous password, can't see the digits, only the number of characters), but it is not the new one I created. When I try to put mine in it just reverts back to the old password, still leaving me unable to update my apps. About a week after this started, my wife and I noticed a dollar charge to our itunes account that we didn't do, we investigated and found out that my itunes account had been hacked. Apparently, the scam works when a small charge goes through and then once it does, much more is spent on itunes. I took my card off file and am waiting to get my apps updated, before I enter a new one. There are numerous issues happening and I'm not really sure where to begin. Any suggestions would be helpful.

Hello bcHarrisburg,
Thanks for contributing to the Apple Support Communities.
It sounds like you haven't been able to log into or use certain Apple services that require an Apple ID.
I have a few troubleshooting resources that can help, although if it appears that your account has been compromised, this article suggests contacting Apple Support:
Security and your Apple ID - Apple Support
If you believe your account information has been compromised, visit My Apple ID to change your password immediately. If you need additional help, contact Apple Support.
For more help with sign in issues, you can find some tips in these articles:
iCloud: Account troubleshooting - Apple Support
FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
All the best,
Jeremy

Iphone 4s and itunes don't work anymore after update iphone

I updated my iphone and plugged it into my mac to synch with itunes because the symbol of the 'usb and itunes logo' appeared.
But now itunes doesn't recognize my iphone anymore and says that I first have to recover my iphone.
But my iphone doesn't respond anymore because it only shows the symbols of usb and itunes.
What to do?

read http://support.apple.com/kb/HT1808

Software Device Update v5.0

I have a curve 8330 which says it should be compatible to the new software. However, everytime I try and download the new version it says it doesn't work. Why can't I download the new version?
Becca

Hi and Welcome to the Forums!
From a PC, you can install any OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload", it can be used to upgrade, downgrade, or reload -- it all depends on the OS package you download and install to your PC. You can even use a different carriers OS package by simply inserting, between steps 1 and 2, the deletion, on your PC, of a file named VENDOR.XML. Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Sadly, I can't really provide answers to your post information:
rlideker wrote:
I have a curve 8330 which says it should be compadable to the new software.
You would have to tell us just how it "says" it should be compatible.
rlideker wrote:
However, everytime I try and download the new version it says it doesn't work.
You would have to tell us exactly how you are making this attempt.
rlideker wrote:
Why can't I download the new version?
The answer to that depends on your answers to the follow up questions.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

CiscoWorks LMS 4.0.1 and devices other than Cisco.

Hello.
Can I use some CiscoWorks LMS functions like config management, topology, with devices other than Cisco?
Thanks.
Andrea

No, RME, Campus and DFM are still hardcoded to restrict to cisco devices.
HUM and IPSLA are more open.
The functionality from the HUM will allow you to monitor availablilty, interfaces and you can add OID's yourself.
IPSLA can use non cisco devices as a target for their tests.
Cheers,
Michel

Ciscoworks LMS 4.0.1 and 3850 switch support

HI, I want to know if 3850 switch is supported in ciscoworks LMS 4.0.1, I added the devices, inventory collections successful but devices icon is blue with question mark "?" and config sync fails always.
I tried to download the packages to install it but I couldn't find it.
thanks fo help

Yes LMS 4.2 needs a new license. You can probably check once if your LMS 4.0.1 license allows you a free upgrade.
Many old LMS 4.0.1 were offered free Cisco Prime Infrastructure 1.x, which has LMS 4.2 available with.
You can check the contract covering your LMS 4.0 on Product upgrade tool :
http://tools.cisco.com/gct/Upgrade/jsp/productUpgrade.jsp
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

Ciscoworks LMS 2.5 don`t working software & devices updates

Similar Messages

Maybe you are looking for