CISCOWORKS - RME netconfig error

When I go to RME>Config Mgnt>NetConfig>User-Define Task i receive the follow error:
CFG0053: No User-defined tasks are available.
I don't can do any configuration.
the version of RME is 4.1.1 and the licence is for 100 equipments, I must update the module? or someone know why appear this error?

I think the problem is more serious
as seen, does not allow me create any task: in the menu, "Tasks" on the left can not deploy any device.
When i go create a task in RME>Config Mgmt>Netconfig>Netconfig jobs i cant not select ALL the devices as shown in the picture below: the host ING_C58_Sw_P2_03 can not choose, instead the other can choose
which will be the cause?

Similar Messages

Ciscoworks RME - RICS001 error

Hello fellow forum members!
We have a problem with RME.
Inventory collection from a WS-C6513 switch is failing.
The error is,
RICS001 error - internal error
Info about the switch,
WS-C6513
ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)
And the corresponding ICServer log,
[ Fri Sep 02 10:40:58 CEST 2011 ],ERROR,[Thread-17],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,455,
java.lang.NullPointerException
    at com.cisco.nm.rmeng.inventory.ics.invdata.containment.ContainmentAGInvData.compare(ContainmentAGInvData.java:103)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processContainmentAG(InvDataProcessor.java:860)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:329)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:915)
    at java.lang.Thread.run(Thread.java:595)
[ Fri Sep 02 10:40:58 CEST 2011 ],ERROR,[Thread-17],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,927, Exception occured in process method while processing: 172.18.194.254 null
ICSException
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:470)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:915)
    at java.lang.Thread.run(Thread.java:595)

Hi,
Kindly Enable the Debugging for Inventory and send me the log files:
If LMS 3.2:
Go to RME > Admin > System Preferences > Application Log Level Settings under Application select ICServer
If it is LMS 4.0 : Go to
Admin >debug settings > Config and Image Management Debugging settings >>
Application Log Level Settings under Application select ICServer
Change the Logging level to DEBUG for all the Modules > Click Apply
Then ran a new Inventory Job and send me the IC_server.log   (Location : NMSROOT\CSCopx\Log)
In the meantime try to Increase the SNMP Timeout and RETRY ,if you have not tried this yet:
LMS 3.2:
go to RME>Admin >system prefernece >RME device attributes :
LMS 4.0 :
Admin > Collection Settings > Inventory > Inventory/Config Timeout and Retry Settings
change the SNMP time out to 14 and SNMP RETRY to 3
and ran the job and see how it works !!!
Thanks
Afroj

Cisco RME Netconfig

Hi all,
I am using CiscoWorks RME 4.0 Netconfig to push some config. I am creating a new Netconfig job. After selecting a device (2621XM), I selected my user-defined SSH task. It didn't show up on the next screen under "Applicable Tasks". However, if I chose the system defined SSH task for the same device, the system defined SSH task showed up.
Why is my user defined task not showing up?
Thanks!

Never mind, I found out where the problem is. Under user defined task, you can choose device type to apply the task to.

Ciscoworks RME 4.0 SNMP Config Change

Hi,
I was locked out one of my routers. I cannot access it via Telnet, SSH, TFTP, SCP, etc. However, I remembered once I reconfigured the router via SNMP community string. Does anyone know how I can change router config via SNMP community string using CiscoWorks RME 4.0?
Thanks!

You can use RME ---> Config Mgmt --> NetConfig --> NetConfig Jobs . For specific steps, read the users guide below for information about different user defined task you can use.
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.0.5/user/guide/netcfg.html#wp1134190

LMS 3.2 and RME NetConfig Job - No Devices

I'm runnig CW LMS 3.2 on Solaris 10. If I go to Resource Management Essentials, click on NetConfig, and then select "create" as in "create a NetConfig job", it takes me to the Netconfig Jobs screen. On this screen, I check "select all devices ", but afterwards it says that "0 devices selected". There are over 1000 devices in our inventory, so I cannot understand why they are not found. They are visible on the system module, and in RME-Devices. But they are not availalble for RME Netconfig jobs.
Any ideas?

When I enter the NetConfig jobs screen, I click on "create" ,which takes me to the next screen, where I click on "device" , which takes me to the next screen where I have a select "device box" and a "select task" box. Checking the "all devices" option results in "0 devices select". If I click on the "+" sign on the "all devices" option to expand a list of all devices, it changes to a "-" but does not show any devices.
About the screen shot, due to the confidential nature of my work environment, I may not be allowed to do that. I'm checking with the security manager about that now.

Ciscoworks - RME 4.3.1 Sotfware distribution needs 32MB minimum in Flash

Hello,
I’m having the need to upgrade over one hundred Cat2900 to a newer image. When I run the software distribution application on Ciscoworks (RME 4.3.1) I get the “catastrophic” warning described below. The new image is only 7MB and there are 22MB free in flash. Is there any way to by-pass this requirement checking???
Catastrophic - SWIM1200: Selected Flash partition requires minimum (32 MB) to upgrade selected software/image. Select a different Flash partition for upgrading the image.
test3#show flash:
Directory of flash:/
   2 -rwx         616   Mar 1 1993 00:00:28 +00:00 vlan.dat
   3 -rwx       2861   Mar 1 1993 00:04:24 +00:00 config.text
   4 -rwx           5   Mar 1 1993 00:04:24 +00:00 private-config.text
   5 drwx         512   Mar 1 1993 00:10:44 +00:00 c2960-lanbase-mz.122-35.SE                   5
27998208 bytes total (22688768 bytes free)
-rwx------+ 1 Administrators None 7075041 2011-06-30 13:17 c2960-lanbasek9-mz.12
2-44.SE6.bin

Hi,
Try the below steps and I hope this should work:
1- Go to RME > Software Management > Software Repository
2 - Select the image you are trying to push (Click on the file name)
3- Change the Minimum RAM to a lower value than the RAM you have on the
device
4 - Click on Update
5 - Try the SWIM job again
Thanks
Afroj

CiscoWorks RME 4.3 syslog forwarding

Hello,
We are running CiscoWorks RME 4.3 and forwarding syslog messages to another syslog server. To forward messages we use script from https://supportforums.cisco.com/docs/DOC-11592
All is working great at the begining of month. With growing of syslog.log file, forwarded messages are delayed more and more. Because of Syslog Analyzer monthly reports we have log rotate at every 1st day of month.
So question:
Is it possible to write syslogs to two different files? One which will rotate as described above, and other which will be used by syslog_forward.pl and rotated every day?
Thanks in advance!
Regards!
Marko

You cannot do this on Windows with the LMS syslog server. All messages will be written to one file. Logrot in LMS can archive the log files instead of just rotating them. This way, you can keep messages as long as you want. Just specify a non-zero number of backups when configuring Log Rotation. The archived files will be created with a numeric extension (e.g. syslog.log.1, syslog.log.2, etc.). Those files can be further archived manually to long-term storage.

CiscoWorks RME 4.1.1 - CRIN0014 Error

Hello,
Not sure when this started, but I noticed the following error when trying to go to the report generator in RME:
CRIN0014: Operation failed while connecting to JRM. Make sure jrm and/or CTMJrmWrapper services are running.
I went and made sure all that I downloaded and applied all patches available to Common Services and RME and this did not do anything. The server is connected to ACS and I re-joined them and re-registered all my applications. The other thing I am noticing is when I go to do practically anything in RME that involved the device selector RME shows 0 devices, but in the RME home page I see all 900+ of my devices listed as "normal".
This is a weird issue that just came out of nowhere. Has anyone seen behavior like this in the past? Not sure what I would need to post as far as log files, etc. but I can provide them as needed.
Any help would be appreciated.
Thanks,
AJ Schroeder

AJ,
With this version of RME you MAY be hitting bug CSCte49301. Based on the release note there is a workaround you can try (see below):
--Workaround
Shutdown CiscoWorks Daemon Manager with the following command from the server's command prompt:
net stop crmdmgtd
Delete the following two files:
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry.backup
Restart CiscoWorks Daemon Manager with the following command:
net start crmdmgtd
If that does not work, then the Windows Remote Management service must be stopped, and disabled. Then, CiscoWorks Daemon Manager must be restarted.
It also could be a permission issue with teh system identity user and its permission on ACS. Ensure the system identity username is configured in ACS with full access privileges in the Ciscoworks "Shared Profile" components.
Rob

CiscoWorks RME - Telnet Failed

We are trying to create an archive of our device configs. When we try this we get the following error:
TELNET: Failed to establish TELNET connection to 10.0.8.2 - Cause: Authentication failed on device 3 times. PRIMARY-RUNNING config Fetch Operation failed for TFTP. SSH: Failed to establish SSH connection to 10.0.8.2 - Cause: Authentication failed on device 3 times. Failed to fetch config using RCP.Verify RCP is enabled or not.
CiscoWorks LMS 3.2, RME 4.3
The following config is on the router:
line con 0
login local
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
line vty 5 15
Not sure what to do to fix this.

Remote into the LMS server, and from there make sure you can telnet into this device. If so, you need to enter the same credentials you just used to telnet to this device under CS > Device and Credentials > Device Managment > Edit Credentials. Enter the proper username and password under "Primary Credential". Then try to backup the configuration once again.

RME-00011 error encountered while creating a new application system

Hello,
I have just started with Oracle Designer.I have installed it.
I wish to run the Repository reports and ER diagrammer from an
existing database.So I created a repository.When I try to create
an application system , it is giving me an error as:
RME-00011:"Operation 'close' on ACTIVITY has failed"
And as I can not create one , i can n ot do any work with it.
What is going wrong here? Your help is greatly appreciated.
-ksg

Hi
first you must to give execution grant for sys.dbms_lock and sys.dbms_pipe to repos owner. And MAX_ENABLES_ROLES must be in multiples of 10 and should execeed 20 in your
INITxxx.ORA file.
But I must to say that, I have this problem with RME-02124 RME-o2105 and ORA-01403 problems. And adviced solution that is mentioned above have not been solving my problem.. :(
But it may be help you...
take it easy..

LMS 3.2.1 netconfig error

Hi,
I am using LMS 3.2.1, and while deploying the configuration to the device via Netconfig job, I receive below error message. All commands deploy successfully but Netconfig job status always failed because of below error message;
Command(s) failed on the device TFTP: Failed on the device.
However I can sync archive the same devices successfully.
Transport Settings->Archive management = SSH TELNET TFTTP RCP
Transport Settings->Config Deployment = SSH TELNET TFTTP
Please advise how to rectify the issue.
Thanks

Hi Rizwan,
You are using system defiend templates to push the Netconfig job or you are using the ADHOC option ?
If you are using system defiend templates use the ADHOC job and see if it makes any difference.
I remember there were few bug on this issue ,I found one :
CSCeh40578 netconfig reports success on failure
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Using CiscoSecureACS with CiscoWorks-RME

I need help in configuring CiscoWorks to use CiscoSecureACS for login authentication. I have specified TACACS+ as the login module. I am able to login with a account from the ACS server. However, the permissions aren't configured correctly. When I login with the ACS server account, options aren't displayed (e.g., under RME, Administration, Inventory, Add Devices...the Add Device option isn't present). Please advise.

To be succinct, ACS doesn't have all the fields that are required by Ciscoworks. That is why you still need to define the user profiles in ACS.
ACS is simply an authenticator. Ciscoworks still handles authorization. Look at the fields available in Ciscoworks and you'll see there are a number of roles that each user can take. I suppose Cisco may someday include extensions in ACS to handle the specific CiscoWorks profile fields but that isn't the case today.
I think the advantage to using ACS is the centralized authentication. Users don't have to change their passwords in multiple places. Logon violations are recorded in one place.
You'll find that once you define the profiles in CiscoWorks they will remain quite static.

Unable to Select Devices in LMS RME Netconfig

Hi,
I am trying to apply netconfig to some devices through RME , however i can see the devices but not able to select them
the checkbox is disabled
any suggestions

These devices are probably put to 'unmanaged' or 'suspended' state.
See "device management state"
Cheers,
Michel

Old devices in Ciscoworks RME

I'm using LMS2.6. RME is version 4.06. I have a number of devices show up in my reports that no longer exist. I can't delete them as they don't appear in the DCR. When I try to add them back in, I get an error saying they already exist.
Can someone please tell me where I can delete these old devices?
Thanks!

I have finally found the answer after hunting high and low.
https://supportforums.cisco.com/thread/174743.pdf
Once I added the devices into ACS, they appeared in my DCR so now they can be deleted

Ciscoworks RME Syslog Automation Actions

I set up RME several years ago on our Ciscoworks several running LMS 3.2 to notify us on any BGP flaps via email notification.
I noticed the last couple maintenance period where we had perform Circuit work with our ISP's. We haven't received any emails....I verified those
routers are configured to send notifications in the Device Selector and even checked the router logs.
004161: Nov 20 05:04:52 EST: %BGP-5-ADJCHANGE: neighbor X.X.X.X Down BGP Notification sent
004162: Nov 20 05:04:52 EST: %BGP-3-NOTIFICATION: sent to neighbor X.X.X.X 4/0 (hold time expired) 0 bytes
The syslog collector status appears to be normal.....is there anything I need to do the fix this?

Hi,
Are you receiving any emails from your LMS server? If not, navigate to Common Services > Server > Admin > System Preferences to enter your SMTP settings.
Identifying the syslog message is one step but there are more.
AUTOMATED ACTIONS
Set Up
By default, Automated Actions are used to notify via email, using the `sampleEmailScript.pl` as the script to run. If you do not want to use this, you could write or use your own scripts to perform the action that you really want. In this case please note that we do not provide support for any custom scripts if the problem seems to be related to the script that you are using.
You still need the following settings:
1. Select Devices
In *RME > Tools > Syslog > Automated Actions* and click on create and select the devices that you wish to use.
2. Define Message Type
Please give a name to the Automated Action and then click on add to define a message type. In here, please specify the following values:
    Facility: BGP
    Sub-facility: *
    Severity: 5
    Mnemonic: ADJCHANGE
    Description: *
3. Select Automated Action
Select the default script or the script that you wish to use. Please note that this script must be located in the *CSCOpx/files/scripts/syslog* file and needs to have only write/execute permissions for casuser/Administrator in Windows.
This way when a message matching the above is generated, the Automated Action is triggered and this will run the script that you choose and do the commands that it has specified.
Here is an example:
If you verify that your setup is correctly configured then take a look at the smtp.log found under ../CSCOpx/log.
Thanks.

CISCOWORKS - RME netconfig error

Similar Messages

Maybe you are looking for