CiscoWorks Shadow Directory File Name After Device Rename

I have noticed that when a Device is renamed through Common Services --> Device and Credentials --> Device Management --> Edit Identity, it does not rename the config archive file name in the shadow directory. Changing the Display Name, Host Name, and IP Address for Device Properties. All of our devices are named with the IP Address of the device so we have the IP Address for the Display Name, Host Name, and IP Address.
Example: Device with the name of 10.10.10.10 has a config archive in the shadow directory with the file name 10.10.10.10.cfg. When the device is renamed to 10.10.10.20 it still continues to config archive ok but keeps the file in the shadow directory as 10.10.10.10.cfg.
Is there a way to get the config archive shadow directory file name to change?
Thanks.

Hi.
Kindly try resubmitting Device under RME (RME ->Device management -> Normal Device ->Select that particular Device and click on resubmit) and once it is back to normal state, then try to collect Archive after performing any change on the Device and see if it updates the Name of the Device under Shadow Directory.
If above steps does not help, you need to delete and re add Device under Common Services --> Device and Credentials --> Device Management in order to get the correct name reflect under Shadow Directory.
Kindly let me know in case you have any doubts regarding the same.
Thanks & Regards,
Nikhil

Similar Messages

Target Directory & File Name parameters in Receiver File Adapter with ASMA

Hi Experts..
I have the following question....
What am I suppose to inform in the Target Directory & File Name obligatory parameters in Receiver File Adapter if I am using ASMA to fill it? Is it any dummy value?
Also, if you have any step by step guide/blog to forward on how to use ASMA in file adapter I will be greatful.
Thanks in advance,
Daniela

You can give any dummy value in dir and file name... Just go through these blogs
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/madanmohan.agrawal/blog/2009/05/20/combining-three-different-aspects-of-pi-asma-af-module-and-variable-substitution-in-one-shot

Recover original file name after rename

I apologize if I'm not asking this question in the right forum...
I received some .MOV files from a video shoot that have been renamed. I took notes on the camera-given file names, and I'm trying to recover that information. Is there any way to reveal previous namings of a file?
Thanks.

Phil Harvey's exiftool has a tag- OriginalFileName. Whether the attribute is set or not is something that you'll have to test.
More here- http://www.sno.phy.queensu.ca/~phil/exiftool/

Is it Possible to Change the Jar File Names After Downloading at Client

Hi. All
Here I am tring to Rename Jar file Names once after JWS Downloads at Client Place. But I don't know how to do this. I Searched in so many Blogs and Forums, but i failed to get Solution for this. As when JWS downloads Jars from server, its changes file names (prefixes with "RM" and "RT"). So same way i want to change once after it downloads files. Can any body tels how to dot this. Really ... Help is appriciated
Thnx a lot for reading the above
Sreedhar P

Note from other posts:
The content and format of the cache will and do change from version to version of javaws. It is highly unadvisable to build into you application relying on the location or format.
That being said, for 1.4.2 or 1.5.0, the location was as given: "C:\Documents and Settings\<UserID>\Application Data\Sun\Java\Deployment\cache\javaws", and in long path below that depending on the URL of the resource.
For version 6, the cache is in : "C:\Documents and Settings\<UserID>\Application Data\Sun\Java\Deployment\cache\6.0" and then in a directory below that named "0" thry "63", depending on the hash of the URL of the resource. The name will be completely obscure, there will be one binary index file with "idx" extension, and then the actual resource will be the file of the same name w/o any extension.
/Andy

EDIFACT File TO IDOC Archive directory file name.

HI Experts,
I have EDIFACT file to IODC scenario. I have multiple source file locaiton but only one Archive location directory.But I have three different kind of file coming form three different location.
we can only have one archive directory per service, is it possible to manipulate the file name so we can tell if files were successful or failed?
For example, FileName1.txt, if it was successful, it would move to the archive directory and rename to u201CFileName1.txt.PASSu201D,
if it failed it would move to archive directory like u201CFileName1.txt.FAILu201D. Is this functionality possible?
Or will we just have to rely on Alert Categories to tell us when files have failed?
Kindly give your valuable suggestion.
Regards,
Sumit Gupta

>
sumit gupta wrote:
> HI Experts,
>
> I have EDIFACT file to IODC scenario. I have multiple source file locaiton but only one Archive location directory.But I have three different kind of file coming form three different location.
>
> we can only have one archive directory per service, is it possible to manipulate the file name so we can tell if files were successful or failed?
> For example, FileName1.txt, if it was successful, it would move to the archive directory and rename to u201CFileName1.txt.PASSu201D,
> if it failed it would move to archive directory like u201CFileName1.txt.FAILu201D. Is this functionality possible?
> Or will we just have to rely on Alert Categories to tell us when files have failed?
>
> Kindly give your valuable suggestion.
>
> Regards,
> Sumit Gupta
When you say success or failure does it mean a successful IDoc created in SAP? if so you will have to use a BPM and on successful creation fo the IDoc write the file out with the PASS name else FAIL name.
you can also look at employing scripts but there is no standard feature for this requirement. I gather alert is a better option.

RDL reports(2008).File name after using Export to Excel is not comming properly in mozilla firefox.

I am using Export to Excel functionality in rdl report.
File name should be "Profitabilty By Buyer". It is working as expected in IE and chrome.
But in mozilla firefox the file name appears as "Profitabilty".
So the issue is it doesnt consider anything after space and user requirement is such that I cant put underscore("_") also instead of space.
Kindly suggest the proper solution.

Hi Mukesh,
Reporting Services, we use a Web browser to view the report that deploy to Report Service. However, not all report functionally is supported by all browsers. Such as, the print button is not supported in Mozilla Firefox. It works only in Internet Explorer
due to it uses ActiveX for the print button.
I have tested it on my local environment, (SQL Server Reporting Services 2008, Firefox 28.0), we cannot reproduce this issue. So the issue can be the custom setting of your browser. Since SSRS reports are not about targeting NON-IE browsers, so in your scenario,
we recommend you use IE to view report on Report Manager.
And you said that you cannot put underscore ("_") also instead of space. However we can do this which you can see on the screenshot below.
Regards,
Charlie Liao
TechNet Community Support

File name after opening in Photoshop CS3

After adjusting an image in Lightroom 1.1, I open it, reflecting the Lightroom changes, in Photoshop CS3. When I'm done tweaking the image in Photoshop CS3, I save it as a PSD file. The problem: I find that two PSD files have been saved, one with the file name (as I intended) and one with the file name with "-Edit" appended to it (before the PSD extension). How can I avoid having the second file (with the "-Edit" appended) created and saved?
Thanks.
Harvey

The -edit file is the first file. That file is the method LR uses to send the image to CS3.

Source and target directory file name should be same

Hi,
How can i generate the same file name in target directory without date and Timestamp.
for eg., Source File name : yeswanth.txt
and target File name also : yeswanth.txt
Note : here source side the file yeswanth.txt is constant and whenever it moves to target directory...should be overwrite.
Reward points for useful answers.
Thanks & Regards,
yeswanth.

Hi Mugdhal,
am getting this error when i sent the same file again.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
Yeswanth.txt: Cannot create a file when that file already exists.
But, here it should be overwrite the existing file.
Regards,
Yeswanth.

File Name after donwload from BLOB

dear experts,
i'm a newbie in programming, just started this month.. i got problem where after i download from blob (oracle) the file name will be the same as the java class that i use to download it. How can i make the file name as it real file name rather than the java class name
For your information i use oreilly package to upload and for download i use other source code i take from internet example.

some of the code in download java class.. i use servlet...
public void doPost(....
ServletOutputStream out = response.getOutputStream();
     response.setContentType(dm_file1contenttype);
     out.write(getBlob(id));
     out.flush();
     out.close();
public byte[] getBlob(String id) {
while (rs.next()) {
          blob = rs.getBlob(1);
          bytes = blob.getBytes(1, (int) (blob.length()));
          conn.close();

CS4: get file name after saving for web

Hello,
I am saving a file via "save for web" with a specific file name in a specific folder maybe with a specific resolution (width x height) entered directy within this dialog window.
Is it possible to get this path and the optionally changed resolution via Adobe script (after saving the file; or starting the script just before "save for web")?
Thanks a lot!
Carlos

I don't see anyway to get the user's options from the SaveForWeb dialog. The descriptors for both charIDToTypeID( "Expr" ) and charIDToTypeID( "Mn " ) are empty.
But you can use the DOM to sfw. Below is a function to save jpg using sfw.
function SaveForWeb(saveFile,jpegQuality) {
var sfwOptions = new ExportOptionsSaveForWeb();
   sfwOptions.format = SaveDocumentType.JPEG;
   sfwOptions.includeProfile = false;
   sfwOptions.interlaced = false;
   sfwOptions.optimized = true;
   sfwOptions.quality = jpegQuality; //0-100
activeDocument.exportDocument(saveFile, ExportType.SAVEFORWEB, sfwOptions);
Look up ExportOptionsSaveForWeb in the scripting guide for other formats.
You would have to do the resize as an extra step when saving using the DOM.

Bridge removing file extension after batch rename

Hi All,
I've been having trouble with what appears to be a problem with Bridge in Photoshop CS2. I'm well aware this is an older version but, in this case, I don't think that should matter. Here is my situation:
After batch renaming jpeg files, I've had a problem with Bridge simply stripping off the file extension on all the newly renamed files. This never happens right away...always later. In other words, I'll batch rename a folder full of photos without issue, note that the rename was successful, and then return to that same folder a short time later to find white thumbnails and missing file extensions. This has happened exactly the same way on two different computers - and always with the delay.
This is getting to be very annoying. Has anyone had or heard of a similar issue? Thanks very much...

First use the menu tools / cache / purge cache for folder, if still in trouble restart Bridge holding down option key to refresh preferences

File names after importing word document

I'm creating webhelp by importing word document. My help is in two languages and yes i have two word documents. To keep the html filenames same for every same topic in english and arabic. I change the file names. Now i want save this setting for the project so while importing the documents again I should be able to reuse this changing filenames. So that it can be life saver for me by not repeating to change the filenames again.

Thinking about this some more, I don't think the feature will do what you want. The filename and any formula will work according to how you paginate and will create a filename based on the heading. That will, I assume, differ from language to language.
The only thing I can think of experimenting with is to have the headings in language one in all documents with the other language being below but not as a heading. Post import you could amend the Topic Title and Topic Heading but leave the filename. It's klunky but the best I can think of right now.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Change KM Transport file name ( .kmc).. rename

Hi all,
In KM transport, while exporting the package... content administration -> km content -> transport -> export
a) First we will give the transport package name add the KM files.
b) Then will go to pending exports from the context menu of the transport package we will select start export.
c) next step it will give the store path of the transport package and file name ( i.e. xxx.KMC ).
now the issue is... This both stored path and file name are read only. the ".kmc" file is the id which is a xx digit numeric number.
Our client wants to change the name of this file name (.kmc) to his own naming convension for easy use and better understanding.
what needs to be done for this???
Thanks,
PradeeP

Pradeep,
The name of the archive file is composed of a technical ID and the ending .kmc
<technical ID>.kmc
but if you are looking at changing the technical ID, I dont think, SAP recommends doing that. You can have a look at the 3rd point in this help document..
http://help.sap.com/saphelp_nw70/helpdata/en/46/77da3bb8036ef0e10000000a1553f6/content.htm
Good Luck!
Sandeep Tudumu

Acrobat 5.0 How do I keep the original file name after I have converted a Word doc to PDF?

MY colleague has a certain setting in Acrobat that allows him to keep the original file name when he converts documents from Word to PDF. Every time I convert Word, Acrobat overwrites the filename and names it "untitled.pdf". I would like to retain the original name and for Acrobat to simply add the .pdf file extension to the original name. How do I do this?

I have no idea what you are doing for sure. Does your WORD document have a name. I opened a WORD document and selected the Acrobat Distiller printer for AA5, I got the file menu for selecting the name and it was automatically filled in with the DOC changed to PDF. If you are using PDF Maker, then you will need to search there - I removed PDF Maker for AA5 years ago and can't view that part. I see the same types of options in PDF Maker for AA8.1.2 as I saw in the printer for AA5 and guess it is the same. The untitled.pdf suggests that you never saved the original DOC file so it has a name.

How to change SQL Server security groups name after server rename?

A Windows 2003 server has been renamed from LAMDAMIRROR1A to LAMDAMIRROR2A and the following
sql has been run in SQL Server 2008 R2 on the server :
exec sp_dropserver 'LAMDAMIRROR1A'
exec sp_addserver 'LAMDAMIRROR2A','local'
However, although everything appears ok, the 5 Windows 2003 Groups (automatically created by
the SQL 2008 R2 Install) still contain 'LAMDAMIRROR1A' in their name. Does this matter ? Can the Windows Groups be just renamed (right click , rename) or will this cause problems ?
The Windows Groups are :
SQLServer2005SQLBrowserUser$LAMDAMIRROR1A
SQLServerDTSUser$LAMDAMIRROR1A
SQLServerMSSQLServerADHelperUser$LAMDAMIRROR1A
SQLServerMSSQLUser$LAMDAMIRROR1A
SQLServerSQLAgentUser$LAMDAMIRROR1A
There are also Registry entries containing the old 'LAMDAMIRROR1A' name. Does this matter ?
Should this be changed ?
eg.
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\100\Machines\OriginalMachineName.
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\Services\Report Server\GroupPrefix.
My Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\printers\Microsoft XPS
DocumentWriter\DsSpooler\serverName.
etc

Hi,
If you have executed the sp_dropserver and sp_addserver in SQL Server 2008 R2, we need to verify if you renamed the SQL Server instance successfully. You can select information from @@SERVERNAME or sys.servers to verify if the renaming operation is completely
successful in SQL Server Management Studio (SSMS). If yes, whether you change the registry entries containing the old 'LAMDAMIRROR1A' name or not, there’s no impact on SQL Server Services. For more details, please review this article:
How to: Rename a Computer that Hosts a Stand-Alone Instance of SQL Server.
In addition, if you must rename the windows groups, you can just right-click the group in Computer Management/System Tools/Local Users and Groups/Groups and rename it, or you can create new groups with new names, for more details, please review this article:
Manage Local Groups. If there are some issues regards the Windows, you can post the question in the Windows Server forums at
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver . It is appropriate and more experts will assist you.
Thanks
Lydia Zhang

CiscoWorks Shadow Directory File Name After Device Rename

Similar Messages

Maybe you are looking for