CiscoWorks: Using Windows 7, Not able to telnet from Network Topology
I've been looking around the web and I can't seem to find a working solution to get telnet to work from Network topology.
I've enabled telnet and telnet server in the Windows features.
I've put in the reg hack that used to work to get telnet running through IE.
Any of you had any luck in this area?
Please read :
* http://kb.mozillazine.org/MAPI_Support
Similar Messages
-
I am not able to telnet my content rule VIP address
I am not able to telnet my content rule VIP address and port number. But I am able to direct to telnet to service servers, which are added into the content rule set. Can anyone tell me why. I have update the latest WEBOS 5.00 Build 69. The content switch model is 11050. thank you very much .
Is possible one armed and in line in the same content switch ?
Currently I have some content rule are using one armed solution, there is only one rule I need to make the server see the original IP. I guess my question is , can I have this rule use in -line solution only, so I will not have to impact other rules set.
The other question since this content rule's service sever have only one interface only, Can I have this in-line solution go in the content switch and come out content switch in the same server farm switch ? Thank you for all the help. -
I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.
Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again. -
HT2693 i tried using windows xp (not knowing it had to be 7 or newer)
i tried using windows xp (not knowing it had to be 7 or newer) and it wont log on, it keeps trying to set up windows when a error comes up, so i took out the cd and tried turning it on again, now it says no bootable device...if i use 7 or vista then will it work without going throught setup or no boot menu??
In iTunes go to general preferences and check the boxes for those you wish to see in the library.
-
Services are running in Server 2008. But still not able to telnet on localhost
Hello Everybody,
Desired services are running on server but still telnet on localhost not happening.
From remote server I am able to telnet on same services.
I am facing issue while doing telnet to remote server alos.
Is there anything which could stopping telnet operation.
From same server I am not able to telnet to other server for SQL services, whereas both servers in same LAN with adjacent IP address.Hi Steven,
Thanks for response.
I have checked same. Services are listening on desired port.
From events log we observed that server moving out of domain controller which root cause not identified yet.
Will it be possible if sever moving out of domain and getting NETLOGON issue. Which could block communication to other server or localhost telnet.
Regards,
Mahesh D. -
Surface Pro 3 / "Windows did not detect a properly installed network adapter"
Hi all,
I've been running the Windows 10 Technical Preview (9926) on my Surface Pro 3 successfully
since January. Unfortunately, I lost all internet connectivity today.
The problem started when I noticed the type cover wasn't working (pressing keys on the type
cover wasn't registering any typing on my screen) and my USB mouse wasn't working either. I tried removing and reattaching the type keyboard but this didn't fix the issue. I had to use the accessibility on-screen keyboard to sign into Windows (thankfully touch
was still working). Once I signed in, I still didn't have typing or cursor ability, so I decided to restart the computer.
Then it got worse. I noticed the Surface Pro 3 was stuck on "restarting" and wouldn't
actually restart. Since it wasn't responding, I held down the power button for about 10 seconds until it turned off. When I turned it back on, the type cover and mouse started working again.
Unfortunately, this is when the WIFI problems began. I had WIFI for a few seconds, and then
I lost internet. I disconnected/reconnected but there was a yellow triangle telling me there was some sort of problem. So I restarted the Surface Pro 3.
When it came back on, there were suddenly NO connections available at all. Opening the "Network
& Internet" settings page gave me the message "Windows did not detect a properly installed network adapter". And here I am, without internet on my Surface Pro 3, borrowing my friend's computer so I can type this message (he is also running
Windows 10 build 9926 on his laptop and is able to connect to my WIFI with no problems, whereas my Surface Pro 3 cannot even detect any networks). I have not dropped or damaged the SP3 in any way, and there have been no storms or power outages or anything
of that sort. Any ideas what could have happened to the WIFI on my Surface Pro 3?
Thanks for your help...
EthanHi Ethan,
Currently, there are a few compatibility issue between the current hardware and Windows 10 Technical Preview (9926 build), this is mostly related to driver compatibility issue.
I suggest you download the latest network adapter driver package to install, when it is finished, check if it appears under Device Manager.
Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/install-wireless-drivers
You can check if you can install the latest firmware package for your device.
Here is an article to talk about such things:
Windows 10 January Technical Preview on Surface
https://www.microsoft.com/surface/en-us/support/install-update-activate/windows-technical-preview#Known
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
User not able to print from SAP
Hi guys,
User is not able to print from SAP. The printer is directly connected to his PC. It is not a network printer. The user is able to print at OS level perfectly. IN SP01, it shows in green and the print job has been completed successfully. I can see the output request. Its all fine in SAP. I am not sure why it is not printing from SAP. Please help ?
Thankshi venkata,
did you already defined your printer on SAP Server using tcode SPAD ?
What kind of printing you're using ?
My suggest for simplest one is create new output devices.
Type tcode SPAD
Give simple name
Choose SAPWIN for device type (if you're using WIndows clients)
On Access Method tab
Choose Host Spool Access Method F : Front end Printing or G :
For Host Printer fill with __DEFAULT (remember double underscore)
save and test it.
ardhian
http://sapbasis.wordpress.com -
Apex link not able to connect from local machine.
Hi,
Here is the scenario.
I have installed oracle apex 3.2 in my vmware linux machine.
I'm able to connect the link (http://b03apex.domain.com) from my linux(vmware) box but I'm not able to connect from windows local machine.
I tried to ping the ip, from both the ends are working but not sure why I'm not able to connect from windows local machine.
local windows ip: 192.168.1.2
vmware Linux ip address : 192.168.1.3
Do I need to do add any parameters in the Apache logs to connect from windows local machine.?
Need your suggestion.
Thanks, Muhammed.user9354175 wrote:
I tried to ping the ip, from both the ends are working but not sure why I'm not able to connect from windows local machine.In that case, it means there is network connectivity. The problem is thus something else - like a firewall or name resolution failure.
>
local windows ip: 192.168.1.2
vmware Linux ip address : 192.168.1.3
Do I need to do add any parameters in the Apache logs to connect from windows local machine.?No.
Can you ping the VM hostname from your Windows console (instead of IP address)?
Have you tried in your Windows browser the following URL (using IP address of the VM instead of the hostname)?
http://192.168.1.3/
Have you checked that your browser is not configured to use a proxy server?
Have you checked your Windows firewall for allowing tcp web traffic to the virtual machine?
Have you checked for the same on on the virtual machine (firewall will be likely be done using <i>iptables</i>). -
X58 Pro-E Not able to resume from S3 (sleep mode)
Not able to resume from S3 (sleep mode) if Base Clock is set over 169Mhz
ex. ASUS P6T Deluxe Mainboard fix this issue. - bios version is 1403.
from ASUS site. - Fix System may not able to resume from S3 if Base Clock is set over 170MHz.
Anybody same Problem??Quote from: AstroRetro on 12-November-09, 21:41:14
I have the exact same issue on my X58 Pro-E.
I can confirm that from 133 to 166MHz S3 sleep works as expected. But above this, the PC appears to go to sleep normally, but cannot wake up. After pressing the power button, the drives spin up and peripherals are powered on, but bios does not load and screen stays blank. Once the PC internal speaker emitted a continuous buzz as well. Machine is unresponsive to power and reset button at this point and I need to hold power button her several seconds to force power off. Then when powering on again, the machine will fail to post again, but this time will automatically reboot, pass post and load windows with all previous applications running as if returning from hibernation.
This issue only occurs when "ACPI standby state" is set to S3 in the Bios. S1 standby state (the default) works fine at all clocks but of course leaves all the fans running. I have tried both states of "Re-call VGA Bios from S3" (Enabled/Disabled) and this has no effect on the issue.
Since this board can happily run at 200MHz FSB with my CPU, and pass all thermal and stability tests I throw at it, it is disappointing that I cannot use this very convenient feature.
I look forward to a beta bios revision to address this issue.
I have the exact same issue on my Pro-E. i've tried everything I can think of, but have had no success. Only S1 works. What's odd is that when I had everything stock, sleep mode in S3 worked great. -
Livecache database instance is not able to connect from DBMGUI
Hello,
We are facing very critical problem. Livecache database instance is not able to connect from DBMGUI .
DB instace is down currently, i checked X_server is running. when i am trying to conect using DBMGUi its going on hang status, same way if i am trying to start using LC10, its going on hang..
Could anybody please help me out if faced this problem.
Earlier it was working fine. But now It 's not able to connect through DBM tool.
Any help would of great help..
Thanks.
Dinesh
please find xserver*.prt files as attached
Date Time PID Typ MsgID Label Message-Text
2009-06-12 03:10:43 2732 12902 XSERVER started, 'X64/SUN 7.6.04 Build 015-123-189-221'
2009-06-12 03:10:43 2732 12904 XSERVER Service port is 7210
2009-06-12 03:10:43 2732 12922 ENVIRON Command line arguments
2009-06-12 03:10:43 2732 12924 ENVIRON [1] start
2009-06-12 03:10:43 2732 12923 ENVIRON Command line argument dump completed
2009-06-12 03:10:43 2732 12898 ENVIRON Resource limit dump start
2009-06-12 03:10:43 2732 12898 ENVIRON Started by user id 58007 group id 1670
2009-06-12 03:10:43 2732 12898 ENVIRON Current user id 58007 effective id 58007
2009-06-12 03:10:43 2732 12898 ENVIRON Current group id 1670 effective id 1670
2009-06-12 03:10:43 2732 12898 ENVIRON cpu time unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON number of processes 29995
2009-06-12 03:10:43 2732 12898 ENVIRON number of open files 2048
2009-06-12 03:10:43 2732 12898 ENVIRON core size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON file size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON heap memory size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON stack memory size 8192 KBytes
2009-06-12 03:10:43 2732 12898 ENVIRON virtual memory size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON Resource limit dump completed
2009-06-12 03:10:43 2732 12898 ENVIRON Environment dump start
2009-06-12 03:10:43 2732 12898 ENVIRON PATH=/usr/xpg4/bin:/usr/ccs/bin:/usr/bin
2009-06-12 03:10:43 2732 12898 ENVIRON :/opt/SUNWspro/bin
2009-06-12 03:10:43 2732 12898 ENVIRON IFS=
2009-06-12 03:10:43 0 0
2009-06-12 03:10:43 2732 12898 ENVIRON TZ=NZ
2009-06-12 03:10:43 2732 12898 ENVIRON TMP=/var/tmp
2009-06-12 03:10:43 2732 12898 ENVIRON TMPDIR=/var/tmp
2009-06-12 03:10:43 2732 12898 ENVIRON USER=sdb
2009-06-12 03:10:43 2732 12898 ENVIRON LOGNAME=sdb
2009-06-12 03:10:43 2732 12898 ENVIRON DBROOT=/sapdb/programs
2009-06-12 03:10:43 2732 12898 ENVIRON LD_LIBRARY_PATH=/sapdb/programs/lib
2009-06-12 03:10:43 2732 12898 ENVIRON Environment dump completed
end of startup -
2009-06-12 03:10:44 2732 WNG 12458 XSERVER NISSL Utility init: CDKLoadSAPCryptModule: 51
2009-06-12 07:54:23 2732 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.115.104.42.'
2009-06-12 08:47:00 17388 ERR 11925 XSERVER Send packet, Ref:9 - connection closed (send:EPIPE)
current write position -Hi Ivan,
thanks for the reply, i used the commands suggested by you.
nzlsfn40:ltradm 43% pwd
/sapdb/data/wrk
nzlsfn40:ltradm 44% dbmcli -d LTR -u control,control db_state
OK
State
OFFLINE
nzlsfn40:ltradm 45% dbmcli -d LTR -u control,control db_admin
OK
nzlsfn40:ltradm 46% nzlsfn40:ltradm 46%
nzlsfn40:ltradm 46% dbmcli -d LTR -u control,control db_online
db_online commands is running since long and in knldiag. i am continuously watching logs as below, can you have any idea
Dinesh
logs :-
2009-06-12 10:58:34 137 12929 TASKING Task T114 started
2009-06-12 10:58:34 137 11007 COMMUNIC wait for connection T114
2009-06-12 10:58:34 137 11561 COMMUNIC Connected T114 local 3966
2009-06-12 10:58:34 137 11509 COMMUNIC Connection broken by appl state 10 T114
2009-06-12 10:58:34 137 WNG 11824 COMMUNIC Releasing T114 connection aborted
2009-06-12 10:58:34 137 12827 COMMUNIC wait for connection T114
2009-06-12 10:58:35 11 11561 COMMUNIC Connecting T115 local 3966
2009-06-12 10:58:35 138 12929 TASKING Task T115 started
2009-06-12 10:58:35 138 11007 COMMUNIC wait for connection T115
2009-06-12 10:58:35 138 11561 COMMUNIC Connected T115 local 3966
2009-06-12 10:58:35 138 11509 COMMUNIC Connection broken by appl state 10 T115
2009-06-12 10:58:35 138 WNG 11824 COMMUNIC Releasing T115 connection aborted
2009-06-12 10:58:35 138 12827 COMMUNIC wait for connection T115
2009-06-12 10:58:36 11 11561 COMMUNIC Connecting T116 local 3966
2009-06-12 10:58:36 139 12929 TASKING Task T116 started
2009-06-12 10:58:36 139 11007 COMMUNIC wait for connection T116
2009-06-12 10:58:36 139 11561 COMMUNIC Connected T116 local 3966
2009-06-12 10:58:36 139 11509 COMMUNIC Connection broken by appl state 10 T116
2009-06-12 10:58:36 139 WNG 11824 COMMUNIC Releasing T116 connection aborted
2009-06-12 10:58:36 139 12827 COMMUNIC wait for connection T116 -
OIM 11G-prepop adapters not able to read from User form
When I try to auto provision ldap account for users after creation of OIM record using GTC, the ldap provisioning doesnt happen. Basically the prepop adapters not able to read from Xel user form. I am stuck with this issue for a while now .
I tried remapping..ect etc..ntng helped.
None of the process form fields are getting prepopulated, when I hard coded avlue in prepop adapters for all the reqd fields in process form, proviosioning gets completed successfully.
Pls. help me with this.
Thanks.
~VSN
I get the below errorr:
<BEA-000000> <Class/Method: tcAdapterExecuter/executeRuleGenerators encounter some problems: java.lang.Exception: Error retrieving user info: User Login
java.lang.Exception: java.lang.Exception: Error retrieving user info: User Login
at java.lang.Throwable.<init>(Throwable.java:67)
at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(tcAdapterExecuter.java:205)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(tcPrePopulateUtility.java:1020)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(tcPrePopulateUtility.java:346)
at com.thortech.xl.dataobj.util.tcOrderPackages.computeProcessFormData(tcOrderPackages.java:901)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(tcOrderPackages.java:423)
at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(tcOrderPackages.java:177)
at com.thortech.xl.dataobj.tcOIU.provision(tcOIU.java:563)
at com.thortech.xl.dataobj.tcOIU.eventPostInsert(tcOIU.java:303)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2905)
at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(tcUserProvisionObject.java:283)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:591)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:104)
at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:35)
at sun.reflect.GeneratedMethodAccessor1831.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
at $Proxy284.execute(Unknown Source)
at oracle.iam.platform.kernel.impl.OrchProcessData.runActionEvents(OrchProcessData.java:1035)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:644)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:686)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.notifyParentProcess(OrchestrationEngineImpl.java:828)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:771)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:674)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:705)
at oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:108)
at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
at sun.reflect.GeneratedMethodAccessor2150.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:148)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy382.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Kevin,
For manual Proviosioning - It works fine.
It fails when I create user in OIM using flat file GTC . I have an access policy to auto proviosion that user with ldap.
As mentioned before, I notice none of the prepops on Ldap process form are able to read value from Xel user form.
Steps I tried Already:
1- Checking access policy
2-remapping process form adapters
Pls. let me know ur thoughts.
~VSN -
I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do
The little lock has nothing to do with speaker volume. It means you have locked the rotation on your iPhone.
Have you tried using the volume control on the side of the iPhone to raise the volume when someone calls? -
I'm attempting to setup AX with Windows XP. I have a 802.11g Dlink router (DI-524) that I typically connect to using my work laptop. The PC has a direct connection to the router. The AX constantly flashes amber. I tried hard reseting the AX. When I run Airport Admin Utility on my PC the AX does not show up. However, I can see it using my laptop in the wireless connections. When I open Airport Setup Assistant I get the following error "This computer has no wireless interface enabled or Windows is not setup to manage wireless networks on this computer. If you have....."
I'm not sure what do do from here. Appreciate any help.I have a Qwest wireless modem (model 2701hg-d) and am trying to set up the Airport Express (AX) to use already existing wireless network wirelessly (ie without the ethernet cable). Is this possible?
In order to set it up I have the AX plugged into the modem via an ethernet cable. I have reset the AX and then run the Admin Utility. Once it recognizes the AX I then go to the Airport tab and select 'Join an Existing wireless Network (wireless client)' and then enter in the Network Name exactly as it is spelled in my modem configuration. I check the 'Internet' tab and it says connect using: Wireless Network adn the 'Network' tab is grayed out. Then I hit update and the admin utility no longer lists the AX and the AX light is blinking amber. Not sure what is going on. I am using v6.2 of the firmware.
Do I need to use WDS?
Also, does anyone know if multiple speaker selection is available for itunes pc like it is in itunes mac? Currently I can only play either my computer speakers OR my kitchen speakers. -
Wireless not working "windows could not find a driverfor your network adaptor"
Hi, So I was just using my laptop normally then the wireless internet stopped working. When I troubleshoot why there is no connection it says "windows could not find a driverfor your network adaptor" Now I can only connect to the internet by plugging a cable from the laptop into the modem. Can some please help. Thanks
Hi ,
Welcome to the HP Forums! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. Thank you for posting. I have read your post, and I understand that your laptop could not connect to the wireless network. I am happy to assist you in the matter. I need you product number for offering the link for driver, or you could run HP Support Assistant to install the missing driver. Here is a document HP PCs - Troubleshooting your wireless network and Internet connection (Windows 7) you could follow for troubleshooting. Let me know if it helps. Regards, -
Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me? The volumn is turned up but I can't seem to resolve the issue? Thanks
Oh no, Robinbird18! This is not what we like to hear about your cell phone. It makes it pretty hard to have a conversation with someone when you can't hear them. If you make a phone call out are you able to have a conversation with someone without any issues? How long has this been going on? Have you tried to use the phone on speaker phone to see if that works at all? Please keep us posted. KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
Maybe you are looking for
-
Packing status and delivery status
What are the fields for packing status and delivery status?
-
Hi Gurus, I want to create validation with the help of which system will give error message if i enter trading partner 1000 and profit center 1000, while doing posting through FB50. Please help me in doing this. Thank You
-
ACCOUNT DETERMINATION "INTERCOMPANY SALES &3RD PARTY SALES" -kishore,AK ,
HI , Rajesh , Kishore , AK , well 2day i had client interview , he was very much stressing on " ACCOUNT DETERMINATION " process in intercompany sales , both in ordering comapny and delvering plant . At the same time account de
-
Trying to connect/sync first gen iPod touch to Compaq laptop
I've had this iPod touch for about a little over a year and a half and it's in perfect condition, it's just when I plug it into my laptop using the USB cord my laptop won't even recognize it and the iPod won't even charge, let alone sync. I know it's
-
Constraints Problem in DOP table - Help
Sir, I need to import a new table dump (Status.dmp) to USER1's schema. USER1 is already having STATUS table (with STATUS_ID column is PRIMARY KEY.) I tried to drop table STATUS. USER1> drop table status; drop table status ERROR at line 1: ORA-02449: