CiscoWorksLMS 4.0 - Service Ciscoworks Daemon Manager does not start

Dear,
After migrating a virtual machine that hosts the CiscoworksLms 4.0, Daemon Manager service does not start.
From what we see this error seems to be a problem in the license.
Following is the error:
ERROR! The license file is invalid. Please click this link for information about Obtaining a valid license or purchase click here for current licensing information Otherwise, please contact your Cisco representative for purchasing information.
I have already entered in the User casuse group of administrators and reset the password but no use Daemon Manager service not up
Thanks for help!

Hi,
From the attached screen shots, I can see the startup type are Incorrect for Many services ,kindly correct their status...
please see below the correct startup type
configuration for LMS Services. As you notice you see that only the
"CiscoWorks Daemon Manager" (except the RSH/Syslog/TFTP services) is set to
start automatically, the Daemon Manager is responsible for starting all the
other CiscoWorks LMS services in a specific order.
So by having the below configuration, LMS will start correctly by itself
after Windows successfully reboots. In fact having any other start up
configuration will cause LMS to not start, because if one of the LMS
services starts before it dependent services, it will not come up and all
subsequent services will fail to start as well.
CiscoWorks ANI database engine - Manual (if Campus Manager installed)
CiscoWorks Daemon Manager - Automatic
CiscoWorks RME NG database engine - Manual (if RME installed)
CiscoWorks Tomcat Servlet Engine - Manual
CiscoWorks VisiBroker Smart Agent - Manual
CiscoWorks Web Server - Manual
CWCS Cmf database engine - Manual
CWCS rsh/rcp service - Automatic
CWCS syslog service - Automatic
CWCS tftp server - Automatic
If DFM installed:
DFM dfmEpm database engine - Manual
DFM dfmFh database engine - Manual
DFM dfmInv database engine - Manual
If IPM installed:
IPM Aging Server - Automatic
IPM DB Server - Automatic
IPM Naming Server - Automatic
IPM PM Server - Automatic
IPM Stopper - Automatic
--Change the statup type Accordingly and then REBOOT the Sever and check the issue again..
Thanks
Afroj

Similar Messages

LMS 3.2 CiscoWorks Daemon Manager does not want to startup in Windows Server 2008 64bit?

I need help concerning the CiscoWorks Daemon Manager that does not want to startup.
I keep on getting the Error 1053. I installed the CiscoWorks LMS 3.2 Evaluation.
I just need the CiscoWorks Daemon Manager started up. I know a solution was posted but the link is invalid.
This was the thread which I found:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cd47f8d/0#selected_message
Could somebody please assist me in this issue.
Thank You
Irvin

Try the below:
1. Select Control Panel -> System and Maintenance -> System.
2. On the left pane, choose Advanced system settings.
3. Under Performance section, choose Settings.
4. Click the Advanced tab.
5. Under Virtual memory section, click Change.
6. Clear the "Automatically manage paging file size for all drives" checkbox.
7. Then Click Custom and specify at least 2048 MB for the min, and at least 4095 MB for the max.
8. Confirm the services are setup correctly. In Windows, go to Start and click on 'Run...'. Type in services.msc and make sure you have the
following services set like this, change accordingly if not:
CiscoWorks ANI database engine: Manual
CiscoWorks Daemon Manager: Automatic
CiscoWorks RME NG database engine: Manual
CiscoWorks Tomcat Servlet Engine: Manual
CiscoWorks Web Server: Manual
CWCS Cmf database engine: Manual
CWCS rsh/rcp service: Automatic
CWCS syslog service: Automatic
CWCS tftp service: Automatic
DFM dfmEpm database engine: Manual
DFM dfmFh database engine: Manual
DFM dfmInv database engine: Manual
10. Reboot after and see if this brings daemons up.

LMS 3.2 CiscoWorks Daemon Manager does not startup

When trying to start CiscoWorks Daemon Manager i get the following message:
"The CiscoWorks Daemon Manager service on local computer started and the stoped. Some services stop automatically if they are not in use by other services or programs."
I have tring starting the service from DOS also and get:
E:\Program Files\CSCOpx\setup\support>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
resting the casuser pasword also did not help.
Anyone know of a solution?

Hi
That was the initial problem, we did increase the swap file space and still get an error. See the errors on the 22nd..
Dec 22 07:20:33 127.0.0.1 dmgtd: Http is the port in ssl.properties file and apacheflags to be set is -d E:\PROGRA~1\CSCOpx\MDC\Apache
Dec 22 07:20:33 127.0.0.1 dmgtd: PX_PROTOCOL in registry http
Dec 22 07:20:33 127.0.0.1 dmgtd: Apache Args in registry -d E:\PROGRA~1\CSCOpx\MDC\Apache
Dec 22 07:20:33 127.0.0.1 dmgtd: PX_PROTOCOL in md.properties file is http
Dont know if this means anything to you :-)

Xfce4-power-manager does not start, but after relogin - works

Hi all.
When I login after system start, xfce4-power-manager does not start and systemtray icon doesn't appear. But after relogin (not restart), the systemtray icon of xfce4-power-manager appears and power manager itself works correctly (if I don't relogin, notebook will shutdown after 10 minutes of downtime - that rule doesn't exist in xfce4-power-manager settings).
Diff between two logs (before relogin and after, xfce4-power-manager --debug command)
diff log_1 log_2
35c35,36
< TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 0
> TRACE[xfpm-battery.c:150] xfpm_battery_refresh_visible(): visible=TRUE: ((XfpmShowIcon) SHOW_ICON_WHEN_BATTERY_PRESENT)
> TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 4
51d51
< TRACE[xfpm-polkit.c:238] xfpm_polkit_free_data(): Destroying Polkit data
System
Linux gready 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
systemd 212-3
xfce4-power-manager 1.2.0-6
That bug start happening after one of last week updates. I don't have a package cache.
Can anyone help me?
p.s. sorry for a bad English.

Yes, i'm actually running xfce4 (all other things from xfce4 group are installed).
It starts from a login manager named LightDM.
AcpiD installed as a dependency.
logind.conf
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min
I turned off key handlers because I truly HATE when I press power button and a notebook doing shutdown after that.
Last edited by theperfectblance (2014-04-17 06:57:32)

GoldenGate Manager Does not start - Windows 7 64-bit, 11gR1 database

Hi Experts,
I ran into very tricky situation and seeking for clarification and if possible solution for the same, here how it goes: (This is a practice setup for my knowledge and not production)
My environement:
GGSCI (msheth-work) 18> versions
Operating System:
Version 6.1 (Build 7601: Service Pack 1)
Database:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
I have two database installed called gg1, gg2 on the same local system.
I have two goldengate installation at following location: C:\gg1 , C:\gg2
I was successfully able to start Manager, Extract and Replicate process with out creating windows services for manager.
I read in discussion forum that it is recommneded to have different manager name and create services for them if you have multiple Goldengate installation in the same system. (Oracle Golden Gate installation
Now when I create services using INSTALL ADDSERVICE ADDEVENTS, manager process does not start and manager report log and event viewer from windows shows following error despite of providing correct login details in manager parameter file:
2012-08-23 10:42:31 ERROR OGG-00664 Oracle GoldenGate Manager for Oracle, mgr.prm: OCI Error beginning session (status = 1017-ORA-01017: invalid username/password; logon denied).
GGSCI (hostname) 19> DBLOGIN USERID ggs_owner, PASSWORD ggs_owner
Successfully logged into database.
Manager Parameter File:
PORT 7810
USERID ggs_owner, PASSWORD ggs_owner
PURGEOLDEXTRACTS C:\gg2\dirdat\ex, USECHECKPOINTS
Your explaination and help will be highly appreciated.
Regards,
Mitul Sheth
Edited by: 954634 on Aug 23, 2012 11:46 AM

Thanks all of you to responding to my post, although I have bad news that I tried everything but it did not work. let me show you what all I have done:
1) Adding windows services for manager
GGSCI (msheth-work) 4> edit params ./globals
MGRSERVNAME MGR1
GGSCI (msheth-work) 5> exit
c:\gg1>install addservice addevents
Oracle GoldenGate messages installed successfully.
Service 'MGR1' created.
Install program terminated normally.
When I try to start manager service either from GGSCI or from services.msc it gives same login error as mentioned earlier in the post.
2) Using tnsnames while login into database:
GGSCI (msheth-work) 1> edit params mgr
PORT 7809
USERID ggs_owner@gg1, PASSWORD ggs_owner
PURGEOLDEXTRACTS C:\gg1\dirdat\ex, USECHECKPOINTS
Just to make sure username and password is fine I login into database using GGSCI command prompt as follows:
GGSCI (msheth-work) 4> dblogin userid ggs_owner@gg1, password ggs_owner
Successfully logged into database.
Hence, after making sure on all your suggestion I could not get it started and still situation is the same. I would need manager login into database becuase I have implemented DDL replication.
Also, just by removing manager service from windows, same configuration without any change works like a charm. It just that for evey goldengate process a new window is create and it can't be closed. (If closed process dies).

When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Mail submission service on 2007 SP3 , does not start.

Hello,
I have two Exchange servers 2007 SP3 over Windows 2008 R2. One of them is a combination of the Client Access + Hub transport, and the other only holds the Mailbox role.
Whenever I start up the Mailbox server, the service "Mailbox submission service" does not run, even when it is set to be started automatically.
The two servers reach the Domain controller, they log on well, so, I suppose it is not a problem related to Active Directory.
I manually start the service and apparently it is okay, mails begin to flow normally.
I am reading issues related to Exchange 2010, about this very same service, but not regarding Exchange 2007 SP3.
Thanks in advance!
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

Luis,
You wrote:
"I have restarted it again (lab environment, so, no impact ) [...]"
The same thing happens to me. One service or another does not start when I boot the test Exchange servers. I have to manually start them. Then everything works fine.
See what Ed Crowley wrote. If you shut down your test machines during periods of non-use, this is not unexpected.
As for the service logon (System Local Account), that is indeed the correct setting:
http://technet.microsoft.com/en-us/library/aa998342(v=exchg.80).aspx
That setting is not something that is normally changed and I don't think changing it would improve matters (it would probably break things).
If you look at the link above, you'll see that the mail submission service is dependent on the Active Directory Topology service. So if that service has not finished starting (has not finished querying Active Directory for the information it needs),
possibly because the CPU on the server is busy performing other startup operations, then it would not matter what the logon account is.
In other words, changing the logon account for the mail submission service will not make the AD Topology service start faster. And the mail submission service cannot start until the AD Topology service does.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Concurrent manager does not start

Sinds today I cannot start concurrent manager, get Windows error 1065, database connection error. The vis database and listeners are running.

After stopping services using c:\oracle\viscomn\admin\scripts\VIS_pc007\adstpall.cmd APPS/APPS command, running C:\oracle\viscomn\admin\scripts\VIS_pc007\adautocfg.cmd, C:\oracle\visdb\9.2.0\appsutil\scripts\VIS_pc007\adautocfg.cmd and starting services by c:\oracle\viscomn\admin\scripts\VIS_pc007\adstrtal.cmd APPS/APPS the concurrent manager has been started. However when I try to log in to E-business suite as sysadmin I get following errors:
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: SQL_PLSQL_ERROR. Tokens: ROUTINE = createSession(int)(userId=6,sessionMode='null','50A433AC43BB44D19FEE33615DA0CC0122667116423664681147113645494831'); REASON = java.sql.SQLException: ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.MO_UTILS" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 1811
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 302
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 455
ORA-06512: at line 1
; ERRNO = 4068; (Could not lookup message because there is no database connection)
     at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:974)
     at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(OACommonUtils.java:866)
     at oracle.apps.fnd.framework.webui.OAPageBean.validateUser(OAPageBean.java:4572)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:687)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at oa_html._OA._jspService(_OA.java:88)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.MO_UTILS" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 1811
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 302
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 455
ORA-06512: at line 1
; (Could not lookup message because there is no database connection)
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:862)
     at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:980)
     at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(OACommonUtils.java:866)
     at oracle.apps.fnd.framework.webui.OAPageBean.validateUser(OAPageBean.java:4572)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:687)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at oa_html._OA._jspService(_OA.java:88)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
java.sql.SQLException: ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.MO_UTILS" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 1811
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 302
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 455
ORA-06512: at line 1
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:589)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1972)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1119)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2185)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2059)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2976)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:656)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:734)
     at oracle.apps.fnd.common.WebAppsContext.createSession(WebAppsContext.java:2120)
     at oracle.apps.fnd.common.WebAppsContext.createSession(WebAppsContext.java:2224)
     at oracle.apps.fnd.common.WebAppsContext.createAnonymousSession(WebAppsContext.java:4347)
     at oracle.apps.fnd.common.WebRequestUtil.setGuestSession(WebRequestUtil.java:1077)
     at oracle.apps.fnd.framework.webui.OAPageBean.validateUser(OAPageBean.java:4570)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:687)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at oa_html._OA._jspService(_OA.java:88)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.MO_UTILS" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 1811
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 302
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 455
ORA-06512: at line 1
; (Could not lookup message because there is no database connection)
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:862)
     at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:980)
     at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(OACommonUtils.java:866)
     at oracle.apps.fnd.framework.webui.OAPageBean.validateUser(OAPageBean.java:4572)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:687)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at oa_html._OA._jspService(_OA.java:88)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
java.sql.SQLException: ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.MO_UTILS" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 1811
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 302
ORA-06512: at "APPS.FND_SESSION_MANAGEMENT", line 455
ORA-06512: at line 1
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:589)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1972)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1119)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2185)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2059)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2976)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:656)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:734)
     at oracle.apps.fnd.common.WebAppsContext.createSession(WebAppsContext.java:2120)
     at oracle.apps.fnd.common.WebAppsContext.createSession(WebAppsContext.java:2224)
     at oracle.apps.fnd.common.WebAppsContext.createAnonymousSession(WebAppsContext.java:4347)
     at oracle.apps.fnd.common.WebRequestUtil.setGuestSession(WebRequestUtil.java:1077)
     at oracle.apps.fnd.framework.webui.OAPageBean.validateUser(OAPageBean.java:4570)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:687)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at oa_html._OA._jspService(_OA.java:88)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)

Akamai Download Manager does not start...Help!

I purchased the downloadable versions of Adobe Photoshop Elements 10 & Adobe Premiere Elements 10. The Akami download manager appears to either not start or gets hung up when initializing. I let the computer sit for 45 minutes to see if it would eventually start making progress. No luck.
Can anyone provide any hints on how to get it to work?
Thanks!
C

This might help :-
http://helpx.adobe.com/creative-suite/kb/cant-download-store-purchase.html

SAP NetWeaver 7.0 ABAP Trial - service Disp+Work.Exe does not start

Hi All,
I have installed SAP NetWeaver 7.0 ABAP Trial Version on Windows Xp sp2.
But when I start sap management console, Disp+Work.Exe shows stopped and i am not able to connect through SAP login.
Any ideas?
Regards,
Mindaugas

The hostname should have 13 caracters at maximum, you will need to remove your installation (use the process below), change the hostname and install it again. It happened with me and after done this process it worked fine.
How to uninstall :
- Drop database: In order to do that go to the Control Panel click on 'Add and Remove Programs' and look for 'MaxDB'. Click on 'Change/Remove' which starts the Installation Manager of the MaxDB. Click on 'Remove MaxDB Components', select 'All Components' and enter the database manager user 'control' and your <password>. Quitt the dialog popup with 'yes'.
- Stop SAPNSP_00 service Go to the Control Panel, click on 'Administrative Tools' and stop the SAPNSP_00 service.
- Remove in your file system the directories of 'SAP' and 'sapdb'. Go to 'Program Files/Common Files' and remove the directory 'Installshield'.
- Run the [clean up |http://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/nw/regcleantools.rar] tool for the registry, press the radio button for 'Uninstall Service', enter 'NSP' for SID and '00' for the number.
- Connect your PC to the network or install the loopback adapter.
- Reboot your PC.

NI License manager does not start; says it's querying for current license status

I currently have the evaluation version of Labview. I tried to use a volume license from my university by typing in the server name in NI License Manager, but after that, whenever I try to open the license manager, it looks like it's stuck saying "querying for the current license status" and never actually opens. Also, when I try to open Labview, it freezes during the setup finalization. I realized afterward that students don't have access to the university license for their own PC's, so I can't use that volume license anyway.
I uninstalled everything having to do with NI on my PC and reinstalled the evaluation version of Labview, but the same problem still exists. Is there anything I could do besides erasing my hard drive?
Solved!
Go to Solution.

Hi amize,
When you say the same problem still exists, is it both the NI License Manager and LabVIEW that are still having the issues? When you open the License Manager and it is not actually opening does that mean you cannot interact with it or the licenses never finish loading in the tree view on the left hand side. If you do have access to the Options menu, open preferences and make sure you have deselected "Use Volume License Servers". At some point, if the windows is not interactive, it should timeout with attempting to make its server connection, especially if you are disconnected from any network connection.
Also, how long do you wait when you open LabVIEW and see the setup screen? Does it just become unresponsive?
If you could follow up with that information it would be much appreciated
Regards,
James W.
Applications Engineer
National Instruments

Fabric Manager does not start

Hello,
I get the message:
"Error Login - Fabric Manager
Unable to login to server!
FMS is still starting up.
Please wait and try again."
I restarted the Cico service, I rebooted the server...
... same result.
What can I do?
Rgds,
Ivy

Hello,
On or "good working" sa005265 Fabric Manager Server:
C:\Documents and Settings\jd04841.DOM001>netstat -a -n -o | findstr 0.0:80
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 5304
TCP 0.0.0.0:8009 0.0.0.0:0 LISTENING 5304
This server works OK wih FM Web Client using localhost, IP or sa005265, local on server or remote Internet Explorer.
On our "bad working" sa005266
C:\Documents and Settings\jd04841>netstat -a -n -o | findstr 0.0:80
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4
We found a system service "4" taking port :80!
For some reason there were two web servers contending for the port MS IIS and Apache.
When MS IIS is de-installed everything works again for FM WEb Client on port :80 ;-))
Can it be that FM comes with MS IIS for version 4 and uses Apache for version 5?
We reinstalled from scratch FM version 5.
All is working now!
Ivy

Solution Manager Does not start

Dear All,
I am not able to connect to Solution Mnager through SAP GUI, So I have stop the Server from SAP Management Console.
After that when I tried to start, it didn't start. Oracle Database is started and running.
So I have restart the Machine. After that I am not able to my SYSTEM ID on SAP Management Console.
Manualy also I am not able to start. Oracle Database is started.
Thanking in Advance.
Nirav

Dear Uday,
Thanks for your reply.
1. Logon pad information is correct.
2. listener is also running. I h ave checked status
3. no log is generated.
In event view, when I tried to start service, it shows following error :
"The SAPSM2_01 service failed to start due to the following error:
The system cannot find the file specified.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
Thanks
Nirav

SAP Download Manager does not start after installation

Hi,
i justed tried to install sap download manager as described here:
https://websmp102.sap-ag.de/~sapidb/002006825000000233132001D
using java http://java.sun.com/products/archive/j2se/1.4.2_12/index.html
installation itself was no problem but if I start the download manager only the color setings from windows
change in blue and back to my own nothing else.
Hope you can help me.
Thanks in advance.
Sebastian
System is Win7 32bit

> i justed tried to install sap download manager as described here:
>
> https://websmp102.sap-ag.de/~sapidb/002006825000000233132001D
>
> using java http://java.sun.com/products/archive/j2se/1.4.2_12/index.html
>
> installation itself was no problem but if I start the download manager only the color setings from windows
> change in blue and back to my own nothing else.
Are you intentionally using such an old JDK?
Markus

Dbconsole service does not start after renaming Hostname

Hi,
I installed 10g Rel 2 successfully on a Windows XP machine, and then renamed the Computer name (Host name) of the server machine, and now the dbconsole service (for Enterprise manager) does not start up and hence I cannot access the EM through the web browser.
Is there a fixed list of files/directories to rename, if I want to access the Enterprise Manager Console, in such circumstances?
I have already made changes in Tnsnames.ora and listener.ora files. But the service still won't start successfully. It gives a "Service-specific error 2".
Thanks

Hi,
you also check .
etc/hosts -----> file in windos platform.
and edit above file and try to connect and for agent.
start agent manully
cmd>set oracle_sid=<sid>
cmd>emctl start agent
regards
Taj

CiscoWorksLMS 4.0 - Service Ciscoworks Daemon Manager does not start

Similar Messages

Maybe you are looking for