Citation Manager for Pages 4.2 or later?

I have used RefWorks and EndNote and Mendeley to manage citations. As far as I know these only interface with MWord. Is there a plug-in or app that allows these citation managers to work with Pages? Are there other citation managers that work with Pages? Does Apple have its own work-around for this? Please don't let me be enslaved to Microsoft!
The only discussion I can find on this topic is from 2007 (5 years ago). Any update on this?

Well, I have databases full of stuff I have read so that when I am done with a paper I can just dump in a multi-page bibliography and then paste in-text citations without having to look anything up or even think. I will look into the EndNote plugin. I am a little surprised there is not an "easy" and "affordable" solution for this. Oh well.
If anyone else has suggestions, I am open!

Similar Messages

Re: (forte-users) Session management for page builder(fwd)

Jaco,
Hope this helps,
John
John Soper, Information Systems Development, ITS, The University of Melbourne
email: j.soperits.unimelb.edu.au >>>> Tel: 9344 5612---------- Forwarded message ----------
Date: Mon, 10 Jan 2000 16:34:31 +1100
From: Lyle Winton <L.Wintonits.unimelb.edu.au>
To: John Soper <j.soperits.unimelb.edu.au>
Subject: Re: (forte-users) Session management for page builder (fwd)
Why not construct an intermediate page after the
login page that has SESSION_UNSPECIFIED and
a refresh META tag. The page can then refresh
to either the login failed or login succeeded pages
depending on how the login went! Looks like...
1) Login page (SESSION_UNSPECIFIED)
2A) Refresh page (SESSION_UNSPECIFIED)
< HTML >
< HEAD >
< META http-equiv="refresh"
content="0;URL=<a href=
"http://www.blah.com/forte.cgi?PageName=3">http://www.blah.com/forte.cgi?PageName=3</a>" >
< /HEAD >
< BODY >
Login succeeded. Please wait...
< /BODY >
< /HTML >
2B) Refresh page (SESSION_UNSPECIFIED)
< HTML >
< BODY >
Login failed.
< /BODY >
< /HTML >
3) We're finally in. (SESSION_REQUIRED)
I'm not sure if this works on internet exploder.
Lyle.
John Soper wrote:
Lyle,
(Post from forte mailing group)
Does this make sense to you?
John
John Soper, Information Systems Development, ITS, The University of Melbourne
email: j.soperits.unimelb.edu.au >>>> Tel: 9344 5612---------- Forwarded message ----------
Date: Thu, 30 Dec 1999 07:54:24 +0200
From: "Jaco Erasmus (home)" <jacoerasmweb.co.za>
To: kamranaminyahoo.com
Subject: (forte-users) Session management for page builder
Hi everybody,
We have a lot of legacy code making use of the page builder service to
produce web pages. These pages were originally written without session
management. I'm now busy adding session management to them, but there is
one problem with this approach and I will appreciate if someone can shed
some light on it. Here it is:
Page one is submitted.
Some validation (authentication) takes place and depending on the outcome,
either page 2A (SESSION_REQUIRED) or 2B (error page with
SESSION_UNSPECIFIED) must be displayed. In order to implement this, I
needed a place to make a decision. The way I've done it, is to pass a
'virtual page' (SESSION_UNSPECIFIED) to the page builder service. The
validation is done here and request.PageName is then replaced with the
PageName of pages 2A or 2B. The HandleRequest() method is then called
again. The problem is that the ValidateSession() method does not get
invoked again, thus allowing 2A through without a session. How do I make
sure that the ValidateSession() method get invoked again?
The approach making use of templates look to me as if it has all the means
to do this (redirect tag), but I don't want to rewrite everything if I
don't have to. Is there a way that a pagebuilder page can be specified by
the redirect tag? This will definitely help, but so far I've only managed
to call templates from the redirect tag.
Is the template approach better suited for session management? It is
definetely better documented...
Regards.
Jaco
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.sageit.com

Hi,
i hope this helps
http://help.sap.com/saphelp_nw70/helpdata/EN/7e/aa610cc1dd8f4388b1df02fc362f0f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/69/c250754ba111d189750000e8322d00/frameset.htm
regards,
Anil.

CVS management for Pages.

Does anyone know why my CVS directories are being blown away when I save .pages files.
I don't get the same problem with other applications like graffle, which also uses directories for files..
The best solution I have found so far is to use OnMyCommand and a little script.
That way you can left click on the item lock CVS , then edit it and left click and unlock.
http://www.symonty.org/iWorkPatches/

I'm afraid the situation has not changed much since version 2.0 and these posts:
http://discussions.apple.com/thread.jspa?messageID=3822447&#3822447
http://discussions.apple.com/thread.jspa?messageID=1822609&#1822609

I would like to know wich citation manager is better to use with papers 5.5.2

Hi,
I've tried to use Sente and Papers as citation managers with Pages, but none of them seems to work with Pages 5.5.2. Is there a free or non expensive citation manager for Pages 5.5.2. If not, which version of Pages do I have to use to work with Papers or Sente?
Thanks!

EndNote Citation is on the Pages v5 Insert menu, but will only be active when EndNote is installed. Because it is Pages v5 with all of its shortcomings, bugs, and eccentricities, a current EndNote solution may not interoperate as originally intended by its developers. You should check their site for any issues regarding Pages v5. The link gives you access to a free 30-day trial.
I am not aware of other citation managers that work with Pages v5. If support for Pages v5.2.2. or higher is not offered by a vendor, then it likely will not work.

"Papers" citation manager no longer works with the new version of pages '13. Is there a fix out there?

"Papers" citation manager no longer works with the new version of pages '13. Is there a fix out there?

Do take a look out there. It is a third party applications so better check out Papers site.

Just bought an Airport extreem for my windows xp. Need Airport Utility v5.5.3. When I go to apple downloads it comes back page not available, try later. Whats up. Is there another way to get this utility so I can get started?

Just bought an Airport extreem for my windows xp. Need Airport Utility v5.5.3. When I go to apple downloads it comes back page not available, try later. Whats up. Is there another way to get this utility so I can get started?

AirPort Utility 5.5.3 for Windows - Support - Apple works fine for me as well as a test.

Display of eBay Sales Manager Sold Page to wide for screen. Scrolling is driving me mad. Help please for Newbie to Mac!

I have a new Mac Book Pro 13” & an iPad for my Amazon and eBay business. I have been a PC user. The problem relates to both.
On my eBay Manager Sold page, the display of the page is wider than my screen. I use Safari and all other webpages are fine apart from this and a couple of other eBay Sales Manager pages. I have tried using the eBay default column widths for the Sold display page & also setting the widths of the Sold columns to my own preferences. However, on each page refresh the display page width reverts meaning I am having to scroll left and right to see full details of each sale.
Help would be much appreciated as it is driving me mad. I have tried all the usual things - page display, clearing cookies, restarting computer but nothing helps.

Hey mylittlefleur,
Sounds like the eBay Manager Sold page expects a very wide window.
Does the content get too small if you zoom out the window?
Zoom in on webpages - Safari Help
Make the webpage content larger: Choose View > Zoom In, press Command (⌘)–Plus Sign (+), or pinch open on your trackpad. To make only text larger, choose View > Zoom Text Only before you zoom in.
Set a minimum font size for webpages: Choose Safari > Preferences, click Advanced, then select “Never use font sizes smaller than.” Click the pop-up menu and choose the minimum font size you want.
Expand to full-screen view: Click the green full-screen button in the top-left corner of the browser window, or press Control-Command (⌘)-F. To return to standard view, move the pointer to the top-left corner of the screen, then click the green full-screen button again, or press Control-Command (⌘)-F.
Of course you can zoom out to see more.
Nubz

Fonts for Pages

My wife is wondering if there is any more fonts, Windows type, for "Pages"? She is only using 67 Windows True-Type. She's worried about compatibility in e-mails, attachments, with our friends who are all Windows/PC users.

The great thing about this was that Apple licensed to Microsoft the TrueType technology that rescued PCs from type that looked totally and utter cr@p both onscreen and in print. In return Microsoft never delivered on their promise of a TruePrint technology. There must be high-fives all round at Microsoft every time they sucker Apple.
Like most matters in life, it's not so simple, sorry.
Bas, the scalable spline technology, was developed by Sampo Kaasila who in 1983 graduated top of his class from Kungliga Tekniska Högskolan in Stockholm, that is, from the Royal Polytechnic. Kaasila then went to work for Imagen Corporation in the US, and then from August 1987 to August 1989 for Apple on the spline programming language. Kaasila also developed what came to be known as the TrueType Variations technology. Kaasila is now R&D Director for Bitstream.
Royal, the internationalisation logic, was developed by two of the contributors acknowledged in the Unicode Proposal of 1988, David Opstad and Eric Mader. Opstad now works for Monotype and Mader for IBM on ICU International Components for Unicode, that is, on the internationalisation element of what once was Taligent. TrueType Specification version 1.0 was published in parallel with the Adobe Type 1 Specification, that is, in mid-1990.
TrueType 1.0 for simple obligatory shaping with the CMAP Character Map was implemented for Microsoft Windows 3.1 by Gregory Hitchcock. The intention was that Microsoft TrueImage would compete with Adobe PostScript and Apple TrueType would compete with Adobe Type 1 (and Agfa/HP Intellifont, Sun F3 Folio, Bitstream/HP Speedo and Fontware i.e. any and all so-called simple character-coded composition models).
With the Apple TrueType Specification and the Adobe Type 1 Specification going open and going public, Linotype which had partnered with Adobe and Apple in late 1984 saw the writing on the wall announced at DRUPA Druck und Papier in Düsseldorf that its leading composition products would be merged with the leading H e l l separation products to form the world's largest and most powerful prepress platform for imagesetting type matter and tone matter.
At FOGRA Forschungsgesellschaft Druck und Medien in München in April 1992, Adobe showed Carousel (later Acrobat) and it was announced that at that point the number of PostScript font program dictionaries available as Adobe Type 1 stood at 12,000 (twelve thousand). Following the publication of the PostScript Language Reference, Second Edition, in December 1990, Microsoft announced to Seybold in 1991 that TrueImage would not stay compatible with PostScript since PostScript did not have a colour architecture that supported the screen (a CSA > CRD transform is not invertible from CRC > CSA so it is possible to preview the printable colour appearance on the screen).
The deal between IBM and Microsoft on OS/2 and its Presentation Foundation fell through at the same time. In the grab bag OS/2 table of the TrueType Specification a sub-tag, the FSTYPE function, was introduced in order to support editable embedding of the font file in the file format of authoring applications including Microsoft Word. In technical terms, this approach preserved the source character string and the simple obligatory shaping of the CMAP Character Map so that style of face, size of face, justification, hyphenation and tabulation was WYSIWYG and at the same time editable since the font file travelled inside the Microsoft Word document.
Adobe went another way, arguing that if all professional production was by way of PostScript, then first capturing professional production in PostScript and then converting PostScript which is a page-dependent sequential access page description model into a page-independent random access page description model that permits pages to the accessed in any order the way the pages of a printed book are accessed in any order was the way ahead. The problem with it was that Adobe began by corrupting the source character string and then had to fall back to synthesising the source character string from cross-font glyph identifiers, whether the Adobe Glyph List or the Association for Font Information Interchange name list.
In mid-1993, Adobe published Acrobat 1.0 without search and Apple started seeding QuickDraw GX which included Apple Portable Digital Document technology. The International Color Consortium was formed in 1993, but the the transformation technology was somewhat simplistic in that it assumed that a print device was luminous linear in XYZ and that matrix-based transforms would suffice. The objections to this lead to the introduction of LUT Look-up Tables for print devices alongside matrix transforms for more linear devices such as monitors. The ICC archicture, unlike the PostScript architecture, was invertible and bidirectional from the start in order to support repurposing requirements including proofing.
In May 1994, Adobe acquired Aldus and thus blocked the QuickDraw GX graphics architecture that competed with PostScript. Aldus and Linotype-**** had already formed the Font Consortium to try to pressure Apple to make TrueType 2 cross-platform, but seeing the success Microsoft had with TrueType 1 and Microsoft applications that supported as well the source character string as WYSIWYG, Apple did not want to licence TrueType 2 whereas the file format of ColorSync 2 became the foundation of the International Color Consortium because Prof Dr Gerald Murch who headed the talks was convinced that Apple would never sell a single operating system on the argument that it was CIE managed from the ground up.
On the world wide web you can find posts in developer discussions where David Opstad says that in his view Apple should not licence TrueType 2 in order to preserve the advantage for Apple. The ColorSync 2 file format did survive to be succesful, but the TrueType 2 file format hitherto has lingered with John Jenkins posting that Apple internally does not have high regard for the rival extension tables termed OpenType, but on the other hand it is plain to see that Apple has done an truly terrible job of evangelising its internationalisation models, let alone supporting them in Apple system software and Apple application software.
In 1994, Dr Timothy Berners-Lee succeeded in setting up the World Wide Web Consortium and CEO's had to change perspective. I seem to remember William Gates as well as Dr John Warnock changing perspective at that point. But by then the starting point was unequal as in abstract archival space the condition is that you identify digital documents by their content of character information, and here Adobe's strategy that started by destroying the source character string was technically harakiri. So, now we have the problem of unknown amounts of viral type and unknown amounts of PDF that preserves the appearance but not the content.
In 2005, Microsoft made it clear that Adobe Type 1 would not be supported under the Presentation Foundation of Microsoft Windows Vista and in 2006 Microsoft left the International Color Consortium, of which it was a co-founder. The disagreement was over the ColorSync 2/ICC model which defines determinate, runtime-independent rendering for colour-colourant transforms, which incidentally is the same mould as the TrueType 2 model for determinate, runtime-independent rendering. The main opponent of this development model has been Adobe, by the bye.
This is a short summary, based on public posts with the people involved as well as private talks.
In 2005, Adobe had Pamella Pfiffner write a twentieth anniversary book on the Publishing Revolution, but the book is a celebration of Adobe's business model and not a discussion of Adobe's drawing models for composition, drawing models for separation, and document models for pagination.
References:
http://www.unicode.org/history/unicode88.pdf
http://lists.gnu.org/archive/html/freetype-devel/2001-10/msg00142.html
http://www.mail-archive.com/[email protected]/msg15529.html

How to manage large pages

Just wondering... What is a good way to manage large pages?
Let's say a page with a pannelTabbed with 7 or 8 tabs. Each tab shows a table that is bound to a different VO. Most of the tabs also have a add,delete,edit button and i'm using popups for that.
So as you can see, their will be lots of bindings and lots of components on such a page.
If i create all this on a single page i think it will be a few thousands of lines which is not realy nice...
Should i create page fragments or create taskflows per tab or something like that?
Currently i have created the page with just the panelTabbed and then for each tab i created a taskflow and dropped that inside the showDetailItem. For each popup, i also created a taskflow so i could reuse it later when i need the same popup in other pages.
I'm wondering... what is a correct approach for such large pages. Are their any guidlines for this?

Hi,
we decided to use dynamic regions (11g) for our application.
This means we only have 1 jspx for the whole application and exchange the content at runtime.
For each "block" (e.g. a table, a tab or a popup) we have a single page fragment and task flow.
One page fragment consists normaly only of one view object.
With this concept we can reuse e.g. the same (similar) table on different pages too.
Hope this helps.
regards
Peter

Can not start Enterprise Manager web page

I can not start Enterprise Manager web page.
Here is my steps:
1. Start enterprise manager
emctl start
Waiting for EM to initialize ...Started
2. Check status:
emctl status
EMD is up and running : 200 OK
3. Start the web page
http://myhost:1810/
4. get following error
"There was no response. The server could be down or is not responding"
System info:
Database: 8.1.7.2
OAS: 9.2.0.2
JDK: 1.3.0_02
Server OS: SunOS 5.8
My question is where is the log file of enterprise manager and what the problem is.
Thanks in advance
Don

diego,
Thank you for your help. when I try your command I get following error:
emctl start iasconsole
Unknown command option
Usage::
emctl start|stop|status
emctl reload | upload
emctl set credentials [<Target_name>[:<Target_Type>]]
emctl gencertrequest
emctl installcert [-ca|-cert] <certificate base64 text file>
emctl set ssl test|on|off|password [<old password> <new password>]
emctl set password <new pwd>
emctl authenticate <pwd>
emctl switch home [-silent <new_home>]
emctl config <options>
emctl config options can be listed by typing "emctl config"

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

Can't find Enterprise Manager for standalone OC4J 10.1.2.0.2

Hi
I downloaded standalone OC4J 10.1.2.0.2 from here so I could experiment deploying webservices to it
http://download.oracle.com/otn/java/oc4j/1012/oc4j_extended.zip
It installed successfully and I managed to start it ok. When I point my browser at it the home page displays but there does not seem to be an enterprise manager page. I have a jdeveloper 10.1.3 install and when I run the OC4J supplied with that I can navigate to an enterprise manager page and view applications and webservices.
This is the home page for the 10.1.2.0.2 install
http://img405.imageshack.us/my.php?image=oc4j101202homepagecq8.jpg
This is the homepage of the 10.1.3 install supplied with jdeveloper
http://img399.imageshack.us/my.php?image=oc4j1013homepagegb6.jpg
(click the images to see their full size)
In the 10.1.3 screenshot you can see a link to "launch application Server Control". This is missing on the 10.1.2.0.2 homepage. Should it be there for both versions?
thanks
paul
Message was edited by:
[email protected]

Hi,
Enterprise Manager for stand alone OC4J was introduced in 10.1.3. 10.12 does not have this feature
Frank

Word processing with citations software for Mac?

What is your choice for word processign with citations software for Mac? I am a graduate student. So, being able to enter citations and compile a bibliography/works cited pages is a must.
In the past I have always used MS Word, as I was a WIndows user in the past. Pages doesn't seem to have the same capabilities as Word. I have read a little about using Endnote and Bookends with Pages.
What is your preference, and why?

Hi jfagundes,
Welcome to the HP Forums! I see that you are having a problem installing the software, with your HP Officejet pro 8600 and MAC OSX 10.7.5. I am happy to help you with this issue!
I have some questions for you:
How is the printer connected? Wireless or USB?
Can you make copies with the printer?
Just in case, here is the software download for your MAC. HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8.
Hope to hear back from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Using Identity Management for Securing Web Services

My goal is to associate my services with an Oracle Internet Directory. I made some attempts to set up SAML authentication for the web services, but it didn't have the right outcome.
(My identity management server and OID is up and running and I have successfully made authentication modules for other web applications)
Here is what I did:
1. I wrote a simple java file, used jdeveloper tools to create and deploy it as a web service to OC4J. I associated an identity management server with this service through OC4J web tools as security provider.
2. I made a data control for the web service and put it in an ADF application . (client)
3. I deployed the client project(2) to OC4J.
I could use the web service through the page.
Then
I secured the webservice to expect SAML for authentication.
Surprisingly, the client could still communicate with the webservice, Why? Shouldn't it have rejected the request because of the problem in SAML token? (The proxy and the data control were not secured, and didn't provide any SAML tokens)
4.
I added login page to my client project (through ADF security wizard). It used idenity management for authentication successfully. login process completes and web service data control is displayed.
5. I want the authentication information to be propagated through the page so that the web service receives the data and uses Identity Management.
I know I should add <property name="oracle.security.wss.propagate.identity" value ="true"/>
to one of the configuration files, but don't know where exactly.
Best Regards,
Farbod

It doesnt matter whether the service is invoked as part of your larger process or not, if it is performing any business critical operation then it should be secured.
The idea of SOA / designing services is to have the services available so that it can be orchestrated as part of any other business process.
Today you may have secured your parent services and tomorrow you could come up with a new service which may use one of the existing lower level services.
If all the services are in one Application server you can make the configuration/development environment lot easier by securing them using the Gateway.
Typical probelm with any gateway architecture is that the service is available without any security enforcement when accessed directly.
You can enforce rules at your network layer to allow access to the App server only from Gateway.
When you have the liberty to use OWSM or any other WS-Security products, i would stay away from any extensions. Two things to consider
The next BPEL developer in your project may not be aware of Security extensions
Centralizing Security enforcement will make your development and security operations as loosely coupled and addresses scalability.
Thanks
Ram

"Something went wrong. We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk."

Hi,
One of my user was unable to receive email from her desktop outlook, browser and her phone. On her outlook, the status of her exchange is disconnected. Then when she tried to access her OWA, this error prompted below "
"Something went wrong. We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk."
Her emails started coming in again after about 45minutes later. It happened twice today.
Anyone have the same symptoms as mind?

Hi,
When user is disconnected to Exchange, please test outlook anywhere connectivity for this user.
Test Outlook Anywhere connectivity
https://technet.microsoft.com/en-us/library/ee633453(v=exchg.150).aspx
Please also check if there are any other events in application log.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Citation Manager for Pages 4.2 or later?

Similar Messages

Maybe you are looking for