Citrix Access Gateway VPN

I have a WRT300N. I am able to use the cisco VPN with no issues. I recently started a new job where we use the Citrix Access Gateway VPN. I am able to connect to the gateway with no problem but I can't get Outlook and IE 7 working consistently. Occasionally I can connect with Outlook but the majority of the time it fails. It does not matter if I use wireless or a wired connection. I am able to connect with no problem from other sites (i.e. hotel).

Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
On the set-up tab change the MTU Size to 1350 and click Save Settings...
Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Triggering" subtab...
1) On the first line in Application box type in ABC, in the Triggered Range type in 25 in both the boxes and Forwarded Range type in 447 in both the boxes , check the enable box... and click on Save Settings...

Similar Messages

Windows 7, Firefox and Citrix Access Gateway

Hello
I have a PC with Windows 7 Professional (32 bit).
I have web access to a Citrix Access Gateway, and it works mostly fine in IE9. But when I try to access via Firefox 9.0.1 the CAG writes that no Citrix client is installed. If I click Already installed, I can move forward, but then there's a box up asking if I want to open or save Launch.ICA when I try to open a program. Whatever I choose, it will not work.
I have a desktop PC with Windows 7 Home Premium and there are no problems even in Firefox 9.0.1. Same version of Citrix Web plugin installed on both PCs and UAC is completely turned off on both.
If there are more security options than in the Professional Premium - So is there anything I can try to disable the Professional?
I can not immediately see that I can do so much in Firefox.
sincerely
Martin

I tried to install the extension IE Tab 2 in Firefox.
It seems to have solved the problem.

Lync via Citrix Access Gateway

Hi
Has anyone have feedback on publishing Lync via Citrix Access Gateway?
Thanks

Have you looked at the NetScaler documentation for Lync 2013? http://www.citrix.com/content/dam/citrix/en_us/documents/products-solutions/microsoft-lync-2013-citrix-netscaler-deployment-guide-v1-2.pdf
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Citrix Access Gateway/ Java applet

I have just recently downloaded Maverick OS. But now i cannot get access to Citrix Access Gateway/Java applet through safari. However, when i use firefox i can. Why is this? I used to be able to get access through safari, until i downloaded Maverick.
Please help?

Is the Oracle Java plugin installed? If not, you need to install it.

Problems with Citrix Access Gateway

Hello,
I have to use Citrix Access Gateway when remotely logging into to my work's records system. After upgrading my OS, now my computer crashes intermittently while using it. It never did this before. I have a MacBook Pro from 2009, and my OS is up-to-date (OS X 10.8.2 (12C60). The error report is pasted below. Thank you for any help you can offer:
Interval Since Last Panic Report: 80840 sec
Panics Since Last Report:          1
Anonymous UUID:                    0077834C-C239-8667-CADC-BD63B2A0BEA2
Tue Feb 5 22:41:32 2013
panic(cpu 0 caller 0xffffff8007243d5b): "a freed zone element has been modified in zone: kalloc.1024"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:214
Backtrace (CPU 0), Frame : Return Address
0xffffff800f253110 : 0xffffff800721d626
0xffffff800f253180 : 0xffffff8007243d5b
0xffffff800f2531c0 : 0xffffff80072435d2
0xffffff800f2532a0 : 0xffffff80072245ed
0xffffff800f2532d0 : 0xffffff8007622ca2
0xffffff800f2532f0 : 0xffffff7f87983cca
0xffffff800f253310 : 0xffffff7f87a95fe0
0xffffff800f253360 : 0xffffff7f87984d68
0xffffff800f2533b0 : 0xffffff7f87984eaf
0xffffff800f253400 : 0xffffff7f8796a515
0xffffff800f253480 : 0xffffff7f87968815
0xffffff800f2534c0 : 0xffffff7f87957083
0xffffff800f253570 : 0xffffff7f87981177
0xffffff800f253760 : 0xffffff7f879821d8
0xffffff800f253830 : 0xffffff7f88a56419
0xffffff800f253970 : 0xffffff7f88a55efe
0xffffff800f253980 : 0xffffff7f88a65989
0xffffff800f253db0 : 0xffffff7f88a02e2e
0xffffff800f253de0 : 0xffffff7f88a06eef
0xffffff800f253e00 : 0xffffff7f883c92a4
0xffffff800f253e20 : 0xffffff7f883c9237
0xffffff800f253e50 : 0xffffff7f88a1e8ac
0xffffff800f253e80 : 0xffffff7f88a03506
0xffffff800f253ed0 : 0xffffff7f88a014c7
0xffffff800f253ef0 : 0xffffff80076472a8
0xffffff800f253f30 : 0xffffff8007645daa
0xffffff800f253f80 : 0xffffff8007645ed9
0xffffff800f253fb0 : 0xffffff80072b26b7
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f87914 000->0xffffff7f87c16fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f87872000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f87900000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f878bd000
         com.apple.iokit.IOSurface(86.0.3)[578CEAAD-1465-3B29-B34F-09586288ED88]@0xfffff f7f883c5000->0xffffff7f883d6fff
         com.apple.GeForce(8.0)[2E56ED9A-D848-3795-9E52-56BABDC9000C]@0xffffff7f889fd000 ->0xffffff7f88abffff
            dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f879 14000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f87900000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f87872000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f878bd000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000007000000
Kernel text base: 0xffffff8007200000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 82159887356528
last loaded kext at 75181534195095: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f895cf000, size 16384)
last unloaded kext at 75263769681153: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f895cf000, size 12288)
loaded kexts:
com.cisco.kext.acsock          1.1.0
org.fuse4x.kext.fuse4x          0.9.1
com.citrix.driver.net6im          1.1.6
com.deterministicnetworks.driver.dne          1.0.14
com.deterministicnetworks.driver.dniregistry          1.0.4
com.credant.iomediafilter.CREDANTShield          4855
com.credant.kext.CREDANTCrypto          4855
com.apple.filesystems.smbfs          1.8
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.GeForce          8.0.0
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleHDA          2.3.1f2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.nvenet          2.0.19
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.NVSMU          2.2.9
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 4 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MJA2250BH FFS G1, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 3

When you are online, is an IP Address on computer the same IP Address that is on http://www.whatismyip.com/ ?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

IE 11 and VPN Registration via Citrix Access Gateway not possible

The registration screen for
the Citrix Accesss gateway is not displayed when
starting the IE 11. Thus, registration is
not possible. The side of the IE 11
is blank.
https://Access.fks.de/vpn/index.html
Kind regards
Bernd Joecks

Hi,
I test in my IE11, and the same result as yours, In my machine, it turns out to be a compatibility view issue, please press Alt+F >Tools>Compatibility view settings>then add the site to the list, reopen the webpage, then the access gateway
will be displayed.
Regards,
Yolanda
Yolanda
TechNet Community Support

Citrix Access Gateway

After installiing Lion, I can no longer access my VPN using Citrix Acces Gateway.
Citrix Access Gatway (version 2.0.1) won't connect: Cannot log on at this time, SSL Error: Peer Hostname mismatch.
Anyone able to access Citrix Gatway VPN using Lion? I have to get on my VPN. any ideas?

Citrix say they are working on a fix... see here:
http://forums.citrix.com/thread.jspa?threadID=290906&tstart=30

Citrix access gateway website -- the application frame does not load properly

Goal - use remote desktop via citrix website; Did work in FF in July; now (Aug) it doesn't
Problem: Application frame with link to RDP is blank
I log into website OK - three frames should be present: 1) fileshare - I don't use this & it appears to load OK; 2) websites - I don't use this & it appears to load OK ; and 3) Applications - This frame is blank but it should load a collection of links including a link to remote desktop
Behavior: If I have just cleared the history then the application frame will "clock" (this is normal) but instead of showing the links a blank frame appears; If I have NOT just cleared the history, the application frame shows the "clock" but it is frozen; slightly different but still results in blank application frame.
I have tried:
1. clear history before logging in (change in "clocking" but still results in blank application frame
2. IPV6- disable by set to true; No impact on problem; toggle back to false
3. network DNS disable prefetch; disable by set to true ; no impact on problem; toggle back to false
4. preference named plugins.load_appdir_plugins; change its value to true; no impact - set back to false
One significant change I have made "around" the time of the problem is I uninstalled norton that came preinstalled, installed adaware, and removed/ disabled the adaware browser toobar ;
I will appreciate any suggestions from the community.

FYI: The problem persists as of 9/20 with version 24.0

10.10.2 and citrix access agteway (CAG) dual monitors

My mac mini which runs 10.10.2 won't allow dual monitors with the citrix access gateway anymore. I dam pretty sure it is an Os side problem as my macbook pro which runs off 10.6 is working fine. Any ideas?

My mac mini which runs 10.10.2 won't allow dual monitors with the citrix access gateway anymore. I dam pretty sure it is an Os side problem as my macbook pro which runs off 10.6 is working fine. Any ideas?

Citrix Access with 8.1

Are there any known issues with accessing Citrix Access Gateway with Microsoft 8.1? When I try to log in through my web portal the screen won't even allow me to log in. Its a black screen with the web address. I have no issues on any other devices. Any suggestions
would be appreciated.
Thanks,
Krystle

try to use Windows compatibility mode
go to pnamain.exe, properties, Compatibility, Check Run this program in compatibility mode for : Windows 7 then Apply and OK
also try install the latest DNE
http://www.citrix.com/go/lp/dne.html
or you should installed Citrix version supported to Windows 8.1
here
better answer and guidance if you contact Citrix support

Quickvpn / client to gateway vpn rv042 can only ping router

I am setting up remote access using an RV042 router. Using quickvpn or a client-to gateway vpn and shrewsoft client, I can only access/ping the LAN side of the remote router and one machine on the remote network. The PPTP server and native Windows 7 connection provide access to all machines on the remote network.
I have 2 possible reasons for this and would like to find the real reason:
1) The remote RV042 is behind another router, and that router restricts access other than the PPTP traffic.
2) The VPN tunnels other than PPTP only allow access to the remote LAN side of the router and remote machines that have the remote router defined as their gateway in the IP configuration.
Any ideas?

I've narrowed the problem down to option 2 above. If I change the gateway of a LAN resource to point to the LAN side of the router, it can be accessed through the VPN tunnel.
I haven't had time to see if adding routing entries can fix this problem. Any suggestions will be appreciated.
Also, I would appreciate an explanation of why the PPTP connection works. I will research this myself (eventually) but am already backed up with other projects..

Access to VPN and Skype from behind work's firewall

I'm running a Powerbook G4 with OS 10.4.11. At work I have a very fast ethernet connection perfect for internet and Work (Exchange) email, however I can't seem to access my Uni email account, VPN or several other services, notably Skype or iChat (as I work away from my kids during the week this is vitally important). I can ping the server for the VPN and both sets of IT boffins assure me that all appropriate ports are open. I can access the VPN through PCs and I am at the moment broadcasting the internet through my Airport to a PC based laptop which is running Skype quite happily. I can go to a local pub/coffee shop and access all of the services through a WiFi/Airport Network, and I have access to all these services when I'm at home (again through WiFi). What am I doing wrong? Any help would be greatly appreciated
D

Hi,
yes, the spilt into three subnets did help. I now can see the routers also from the LAN which solves Problem A)
Regarding the access from WAN1 to WAN2 the background is a long story about different flatrates from Provider A and B. To keep it short: DSL is stable but very slow during some hours of the day and attached to WAN2, LTE (4G) is fast but not stable (at least 2-3 hickups per day). Therefore I need the RV042 to keep the LAN clients always online as I need it for my job. The telephone is another issue. The fritzboxes do allow VOIP over their own Internet connection but also using another Fritzbox is possible. I have my telephones connected to the DSL Box (WAN2 = 192.168.179 now) and I have a flatrate for calls to cell phones with my 4G provider (WAN1 = 192.168.178 now). As the 4G keeps failing from time to time it is very annoying when it happens during a telco (and we all know Murphys law). So the ideas is to have the telphones attached to the stable (WAN2) DSL Box and reroute it for calls to cell phones via WAN1 ( which is a feature of the boxes and worked perfectly). If the 4G fails the DSL Box uses its own Internet connection to make the call (but then I have to pay for it).
So I need access from WAN2 (192.168.179) to WAN1 (192.168.178). I tried a static route in the WAN2 Box but it didn't work (I've used the RV042 WAN interface IP: 192.168.179.100 as Gateway).
Kind regards
Klaus

Can't access non-VPN resources when connected to VPN

I need to access web based resources over a VPN for work. My admin gave me the connection parameters, and I can connect to the VPN and access what I need, no problem. But when connected to VPN, I can't access websites, Subversion repositories, Skype, etc. that are not on the VPN.
On Windows, there's a connection property on VPN connections called "Use default gateway". With that option cleared on my Windows machine, I can access both VPN and non-VPN resources simultaneously. I can't spot anything equivalent in the VPN connection in Network Preferences.
So I guess the question is: what network settings on Mac (Snow Leopard) will enable me to access both VPN and normal resources simultaneously?

I have found a workaround. It isn't optimal, and it's disappointing that VPN is so poorly supported on Mac. Though the specific IPs are probably applicable only to the particular VPN I connect to, maybe the general idea can be of help to others and your network admins can supply the particular IPs you need.
1. My Admin had me open Network Preferences, select the VPN connection, click the Tools icon at the bottom, and select Set Service Order. In that dialog, move the VPN connection to the bottom of the list (my EVDO modem that gets me my internet connection is fist in the list). Apply this change.
2. Next, my admin asked me to run the following in Terminal, once when VPN was not connected (but internet was connected), and again with VPN connected, and send him the output:
*netstat -nr*
3. After looking at the terminal output, admin told me to run the following in Terminal with the VPN connected:
*sudo route add -net 10.123 -netmask 255.255.0.0 10.123.50.1*
After disconnecting both VPN and Internet connection and reactivating each in turn (internet, then VPN), I was able to access both VPN and non-VPN resources simultaneously.
The bad news is that every time I need to connect I have to run route add in Terminal and enter my password. I will probably make a shell script to at least run the command so I don't have to remember it.
Here's hoping this helps if others bump into this pernicious little problem.

Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTim

Any help would be much appreciated.
Kind regards,
RocknRollTim

App not working properly when access over vpn

hi,
Strange behavior of application when access through vpn. The application keeps on reloading endlessly. And other application renders completely but when the tab is clicked it will reload the whole page displaying the same tab. Is ADF has an issue when access over proxy?
Both application is build using ADF 11g and is implemented through regions.
Thanks in advance.

I think there something to do with PPR or calling the region or am I missing something? The page that keeps reloading has taskflow with activation is immediate but the refresh is set to IfNeeded. Then the page with tabs, the content of the tab are taskflows as well.
Thanks in advance.

Citrix Access Gateway VPN

Similar Messages

Maybe you are looking for