Citrix CAG and CSS

I have a problem with Citrix dropping connections when going through the CSS.
I am just doing a L3 content and the CAG is handling all the SSL.
I have set the flow-timeouts and verified that flows are NOT timing out with a show flows.
I have enabled tcp fragments. Otherwise the config is very simple. Just two CAGs with a VIP to load balance.
When I go through the CSS, the connections are dropped after about 1 1/2 hours. The client side appears to issue a "FIN" Packet to close out the connection.
However, when we bypass the CSS, we DO NOT get this behavior.
Has anyone seen this or have any suggestions?

Hi Chris,
You might want to try balance leastconn for your balancing method. Also, note that you are not currently configured for sticky, so the sticky timeout you have configured isn't doing anything. Do you require sticky? If you do not require sticky, then leastconn should give you the best distribution across services at any given point in time. Adding sticky, such as with advanced-balance sticky-srcip, will skew load balancing as clients become stuck to one service.
Hope this helps,
Sean

Similar Messages

Remote Desktop update has caused me to no longer be able to access work using Citrix/CAG. IT found my access to be intact on their end. What can I do?

How can I get access to my work after the Remote Desktop Update 3.8.2 blocked my access through Citrix/CAG?

Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

PL/SQL Server Pages (PSPs) and CSS

Hi,
I am used to creating standards compliant websites using XHTML and CSS and some other application language for dynamic content. I have recently started working with PL/SQL and want to create an application using PSPs. I was wondering the best way to go about including CSS in an application, because it doesn't make sense to duplication the CSS on each page, but since the PSP is converted to a procedure this seesm to be the only way to include CSS?
Any ideas on best practice for using CSS with PSPs?

I think you should be able to put all your CSS into a single file, or only a few files, like in a normal web project and that you can include this file using the regular HTML tag.
You store your CSS file(s) in a folder that is accessible by your website. Normally this is achieved by adding an Alias in the Apache webserver that is embedded in the Oracle database.
If I remember it correctly (it has been a while since I saw the embedded webserver) your request for your PSP goes to an url like http://your.server.com/pls/your_page. Everything of the url that comes after /pls/ is handled by the mod_plsql Apache module that is repsonsible for sending the request to the database and returning the result to the screen.
If you can define an alias like 'css' (without the quotes), which makes the url something like http://your.server.com/css/, then you can try to include your CSS file(s) referring to /css/file.css. Once you get this working, you can do the same for images.
This is a generic approach that can get you started hopefully.
Good luck.
I hope this can get you started. Information on the alias can be found

Keyboard no longer working when using Citrix Receiver and OSX10.9.5

I use Citrix Receiver and an iMac to connect to my work desktop from home. I have the latest release of Citrix Receiver. This morning I upgraded to OSX 10.9.5 and, after the update, my keyboard was not recognised when using Citrix Receiver. It works fine otherwise. Yesterday I had no problems. Is there something in the new OSX upgrade which interferes with Citrix Receiver? Does anybody know what I need to do to get it working again?

I had the same problem and found the solution on another discussion board. You just go to the dock and click on Finder, then click back in the Citrix window and the keyboard works again. At least for me.
MacBook Pro 2011

Custom html and css broken in BC

I have created some content in iWeb. A photo gallery that doesn't work when uploaded to BC.
It works fine when I upload to a different Host.
http://isodisc.businesscatalyst.com/usbcat/ISODISC_Full_USB_Flash_Catalog.html

I'm building my website in Muse, using a few Adobe typeKit fonts - Open Sans and Bebas Neue. There's plenty of code and css developed when I export the muse file QUESTION: Will Contribute maintain my font choice integrity? Or do I play it safe with standard web-safe choices?

How to include external javascript and css resources to a jsf?

I need to include external css and javascript files to my jsf page. Using the code below does not work because all the styles on the css page are ignored and the functions within the js files are not executed.
<link rel="stylesheet" type="text/css" href="/resources/styles/style.css" />
<script language="JavaScript" src="/resources/javascript/util.js"></script>When I try to execute any js function within a script tag on a jsf page I get an object expected error.
I googled about my problem and found this piece of code for importing styles for an external css.
<style type="text/css">
@import url("/resources/styles/style.css");
</style>How could I add an external javascript file to my jsf?

Used the relative urls in my first post as well as these, and both were not working.
<link rel="stylesheet" type="text/css" href="./resources/styles/style.css" />
<script language="JavaScript" src="./resources/javascript/util.js"></script>The ./ tells that the external file can be found by starting at the current directory and working down the path to the specified file. This is my directory structure. Index.jsf is the file that references the external js and css files.
-Webcontent
|_index.jsf
|_resources
|__styles
| |__style.css
|__javascript
|__util.js
Either way I still can't reference the files that I need. Calling a javascript function results in an object expected error, and the styles are ignored.
If I include the js file directly in the jsf then I can get it to work. I don't want to do this because I have created a handful of seperate js files, and do not want to include all of them in one page. I am using myfaces and tomahawk if that helps.

Upgrade from 2.2.1 to 3.1.2: Breaks JS and CSS?

Upgraded from 2.2.1 to 3.1.2. The upgrade went fine but most JS and CSS seems to be broken.
Examples
1. Javascript functions not defined: redirect, html_ShowElement
2. Template button images are broken. See http://i41.tinypic.com/294pgso.jpg
My page templates are mostly unchanged, i.e. they have stuff like
#HEAD#
<title>#TITLE#</title>
<link rel="stylesheet" href="#IMAGE_PREFIX#themes/theme_10/theme_V2.css" type="text/css" />
This seems to be generating the following HTML
<script src="/i/javascript/htmldb_html_elements.js" type="text/javascript"></script>
<script src="/i/javascript/htmldb_get.js" type="text/javascript"></script>
< link rel="stylesheet" href="/i/css/core_V22.css" type="text/css" />
< ! -- [ if IE]><link rel="stylesheet" href="/i/css/core_ie_V22.css" type="text/css" /><![endif]-->
< link rel="stylesheet" href="/i/themes/theme_10/theme_V2.css" type="text/css" />
Version 3.1.2 seems to have changed stuff around. I tried creating symbolic links from htmldb_html_elements.js -> apex_3_1.js and htmldb_get.js -> apex_get_3_1.js and this got me past the Undefined errors but now I get 'apex is not defined'.
Is there a quick way to upgrade all the applications to the new way of doing things? I am not looking forward to modifying all my page templates!
Help!
Thanks

Sorry, my fault, my database got refreshed from one containing Apex v 2.2.1 without my knowledge and the OHS images folder was still pointing to the that from the 3.1.2 distribution. This was causing the problem. When I upgraded Apex to v3.1.2 again, everything is back to normal.
The #HEAD# substitution string in my page templates automatically pulls in the appropriate JS/CSS libraries
<script src="/i/javascript/apex_ns_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_get_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_builder.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/apex_3_1.css" type="text/css" />
< ! -- [ if IE ]><link rel="stylesheet" href="/i/css/apex_ie_3_1.css" type="text/css" /><![endif]-->
<link rel="stylesheet" href="/i/themes/theme_10/theme_V2.css" type="text/css" />
Sorry for the false alarm
Thanks

Java Swing/AWT and FX is so old school! Give me HTML and CSS for GUI!

Dear Java,
I am a seasoned programmer and I feel it's time JAVA implements a GUI system where it uses HTML and CSS for the GUI. For the love of god just look at the interfaces you can make using HTML and CSS alone. I am a big fan of Java Swing and the recent GUI designer for FX is quite cool. But they are just not as simple as HTML and CSS. And JavaFX has some interesting requirements for the graphics.
I know it is possible to use JavaFX and implement the WebView/WebDriver and make it load a HTML page, etc... but why go through all the trouble?
Just imagine... if you make Java where it has powerful back-end to do what it does best and the HTML/CSS powered GUI on the front-end. It will make the lives of many developers much much easier.
I am not sure whether a Swing designed GUI will be faster than a HTML designed GUI... but if you look at a traditional browser and how fast it renders HTML/CSS, I am sure if Java had a native Form where it uses HTML and CSS to render the GUI, Java will make the dreams of many programmers a reality.
Make it happen!!!!

Check this i solve problem just now using this
https://wiki.archlinux.org/index.php/Ja … ow_Manager

HTML and CSS Best Practices for Eloqua?

Hello Topliners Community,
My name is Ben and I am a Web Designer. I am currently looking for any guidance on HTML and CSS best practices when working with Eloqua. I am interested in the best practices for e-mail and landing pages.
Thank you,
Ben

Personally I like to upload my custom created html/css into Eloqua instead of using the WYSIWYG.
But if you must then right clicking on text boxes and click edit source is the way to go.
There was a good discussion on editing your forms with CSS:
Energize Your Eloqua10 Forms with CSS
created by Ryan Wheler on Nov 2, 2012 8:44 AM, last modified by Greg Stotler on Sep 19, 2013 2:00 PM
Version 2
CSS can be used to heavily customize the layout of forms in Eloqua10. In this article we will provide sample cover some common formatting use cases on Eloqua10 Landing Pages. Further details about uses of CSS in Eloqua10 form templates can be found here: EE12 - Do It - Eloqua - Energize E10 Forms
Eloqua10 Forms HTML Structure
Below is an outline of the structure of the HTML generated by Eloqua when a form is added to a landing page. By targeting the HTML classes highlighted below, we can control the layout of any form on your landing page.
For the rest of page: http://topliners.eloqua.com/docs/DOC-3015

HTML layout and CSS handling in CQ5

OK...so this may sound like a newbie question...because it is. Kinda.
I'm new to CQ5 but am an experienced web developer. CQ5 doesn't appear to provide tools to layout of web pages (html tags, divs, css styling, ...). I'm comfortable doing this by hand, but that seems rather old school in the days of Dreamweaver and such.
What layout/design tools do you recommend for creating HTML and CSS pages for use in CQ5? I have wireframes in-hand and ready to translate to HTML.
Thanks!

None of the enterprise content management systems that I've used, including CQ, provide WYSIWYG tools for building the layouts/templates of the site.
I always build complete static versions of the designs/wireframes by hand entirely outside of CQ. I prefer Textmate, but of course you can use whatever visual tool you prefer. After the static HTML passes muster it then needs to be integrated, by hand, into CQ in the form of page and content components. This is generally straightforward (depending on the design).
CQ 5.5 does give you the Site Importer to help bring an existing page (or set of pages) into CQ which it then breaks up into the beginnings of a project, but in reality the developer will still need to break that up even further anyway. Applying this integration by hand from the ground up will likely give you better control and awareness of what's going on in your project. Letting to much "magic" happen behind a slick wizard or WYSIWYG won't help you when something (inevitably) needs debugging and dissection.
Having said all this, since the Adobe acquisition of CQ, I wouldn't be surprised if there was some kind of Dreamweaver plugin in the works for connecting to CQ!
Good luck!

Html and CSS in JEditorPane

I have been working with Velocity to produce dynamic HTML and displaying the results with the JEditorPane. I have been searching for an article or tutorial that talks about the JEditorPane (HTML and CSS related), but nothing has come up (I also did a quick search in this forum).
I would like to know what is JEditorPane capable of doing in terms of displaying HTML with CSS, and how do you set it up.
If JEditorPane is not the best option with HTML that has positioning in CSS, can somebody suggest something else that has better support for CSS than JEditorPane?
I would greatly appreciate any response (Any suggestion or links to additional information will be great too!)
Thanks,
Victor Gutierrez

I would like to know what is JEditorPane capable of
doing in terms of displaying HTML with CSS, and how
do you set it up. JEditorPane has no support for CSS
If JEditorPane is not the best option with HTML thatit's not
has positioning in CSS, can somebody suggest
something else that has better support for CSS than
JEditorPane?Search google for 'JDIC' find the WebBrowser component
I would greatly appreciate any response (Anylet's not get carried away here
suggestion or links to additional information will be
great too!)
Thanks,
Victor Gutierrez

Tools for validate HTML and CSS Error in DW?

Hello Guys,
Want to know any addon or menu tool in Dreamweaver to validate HTML and CSS error.
Because every time i have to check in w3c validation. If DW having in this options it wouldbe great to develop website with out error.
Please let me know your suggestion for that.
Cheers
Abdul
www.ilearnsmart.com
www.whitehouseit.com

DW does provide tools to help with validation:
http://articles.sitepoint.com/article/dreamweaver-8-standards/1
http://www.adobe.com/support/dreamweaver/htmljava/migrating_hs_to_dwmx/migrating_hs_to_dwm x06.html
I find it a bit more comfortable though to use teh W3 Validator and I always access that with the Firefox Browser and the Web Developer plug-in. Another good plug in for FF is Firebug.
Martin

About HTML and CSS styles in the Contribute Style menu

This question was posted in response to the following article: http://help.adobe.com/en_US/contribute/using/WS5b3ccc516d4fbf351e63e3d1180fba3730-7e6cCS5. html

I'm building my website in Muse, using a few Adobe typeKit fonts - Open Sans and Bebas Neue. There's plenty of code and css developed when I export the muse file QUESTION: Will Contribute maintain my font choice integrity? Or do I play it safe with standard web-safe choices?

Pdf document on custom template and CSS

There was a small pdf document on CSS and templates in the turial section of APEX. Anyone know where is this?
George

Raizel wrote:
> In article <e4ovcd$eei$[email protected]>,
> "billugs" <[email protected]> wrote:
>
>> It seems that my template and css style are still
not showing up on my page,
>> I
>> uploaded both and I am out of ideas. Does anyone see
a problem that I can
>> fix?
>> <a target=_blank class=ftalternatingbarlinklarge
>> href="
http://www.personalizedspanish.com">http://www.personalizedspanish.com</
>> a>
>
> Can't help but ask -- why do you post your URLs as <a
target=_blank
> class=ftalternatingbarlinklarge
>> href="
http://www.personalizedspanish.com">http://www.personalizedspanish.com</
>> a>
>
> instead of just the URL?
Raizel: it's a problem with the forum and how stuff from
there gets
posted to the newsgroup. Per a recent post by Murray, the
Adobe team
are working on the problem. It's driving us all crazy.
Bonnie in California
kroko at
pixelplum dot com
http://www.theanimalrescuesite.com/cgi-bin/WebObjects/CTDSites.woa

Including external javascript and css files in servlet

Hello,
I am struggling to generate an HTML page from within a servlet using external javascript and css files. I am not sure how to point the servlet to the external files.
Any code sample to accomplish the above will be much appreciated.
Thanks inadvance,
Antana.

Can't you just include the following in your servlet?
       response.setContentType("text/html");
        PrintWriter out = response.getWriter();
        out.println("<html>");
        out.println("<head>");
        out.println("<title>Getting CSS</title>");
        out.println("<link rel='stylesheet' type='text/css' href='yourCSS.css' />");
        out.println("<script language='JavaScript' SRC='yourScript.js'></script>");
        out.println("</head>");
       //...

Citrix CAG and CSS

Similar Messages

Maybe you are looking for