Citrix getting port in use message.
I am getting message when trying to connect to citrix. It says port 999 already in use.
How can I tell what ports are in use?
I would try connecting the Palm's cradle, with the Palm in it, to your PC and then, in Device Manager, right-clicking on Palm Handheld #2 and selecting Uninstall Driver. Palm Handheld/Palm Handheld #1 could be visible if you connect the Palm to USB port you may have tried using perviously.
After uninstalling Palm Desktop, reboot the PC, make sure Palm Desktop 6.2.2 is installed (since you are using Vista) and then try reconnecting the Palm.
One last thing: Make sure that you are using a 32-bit version of Windows. There is no 64-bit USB driver support from Palm or ACCESS. If you do have a 64-bit version of Windows Vista installed, that would clearly explain why you are having so much trouble getting your m500-series PDA to sync. This thread tells you how to check for a 32 or 64-bit install of Windows.
Alan G
Similar Messages
-
Won't always sync- "port in use"
Probably about 6 times out of 10 attempts at syncing my palm fail. I get the msg that the port is in use by something else. The only thing I do is restart the computer to get it to sync. Sometimes I have to restart many times before it happens. I use a bluetooth usb b/c I have MS Vista64 which does not support my Palm Tungsten E2. I'm guessing that the bluetoothis the root of the problem...but it's just a guess. Thanks for any help. JD
Post relates to: Tungsten E2I'm afraid I have no suggestions for rileycrk, but I'm posting here because I have a problem that might be related. I have a Treo 755 with Palm Desktop 6.22 (Access). Last winter when my XP machine died and I ended up with an HP laptop on Windows 7 Home edition, I followed instructions I found here to get my Treo to sync via bluetooth. It has worked like a charm until this week.
Windows 7, as most of you probably know, has a total mind of its own. It is always re-configuring itself and screwing up parameters I have carefully set up. This week it suddenly re-installed drivers for the bluetooth keyboard and mouse I've been using all along. Sometimes I can stop it from doing crap like this, but this time it refused to recognize the peripherals without an install. I need the ergonomics, so I let it happen.
And sure enough, now I can't get my Treo to be recognized. I have deleted an reinstalled the device a couple of times. The PC always finds it but then lists it as "unavailable". This last time it listed it as a modem-- and I didn't get the opportunity to change that. Hotsync will not work -- it flashes something too fast for me to see and then goes back to the screen showing the date and time of my last one.
Is it possible this has anything to do with the Desktop Installation? I have seen instructions elsewhere suggesting a clean uninstall and reinstall of that software (Hate making registry changes but will do it if I have to). It doesn't seem like that should be the issue but does anyone have any thoughts on that or anything else?
NB: I have often gotten the "port in use" message before all this, because I don't keep my phone's bluetooth on except when I'm hotsynching. I've never had a problem with that before.
Any thoughts or suggestions would be very much appreciated. -
When and how does the message context get removed from the message when we use pass thru send port
Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
RavindarThanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar -
The Green Light is on, on my time capsule and airport but it will not back up all i get is the following message below please help.
The backup disk image “/Volumes/Data/iMac-D49A20D0AE94.sparsebundle” is already in use.Welcome to Apple Support Communities
First, restart your iMac and your Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, read > http://pondini.org/TM/C12.html -
"Port In Use" error message when trying to sync Palm m500 to Windows Vista machine
An error message on my Palm displays "Error: Serial Port in Use (Serial 0307)" when I try to sync my Palm m500 to my Windows Vista (32 bit) Home Basic machine. It worked until about 3 months ago and I don't have a restore point that far back to try System Restore. I've upgraded to Palm Desktop 6.2.2 (was using 4.xx) and downloaded the PalmHotSyncSetup from Pimlico Software but nothing helps. Any ideas are appreciated.
Post relates to: Palm m500I would try connecting the Palm's cradle, with the Palm in it, to your PC and then, in Device Manager, right-clicking on Palm Handheld #2 and selecting Uninstall Driver. Palm Handheld/Palm Handheld #1 could be visible if you connect the Palm to USB port you may have tried using perviously.
After uninstalling Palm Desktop, reboot the PC, make sure Palm Desktop 6.2.2 is installed (since you are using Vista) and then try reconnecting the Palm.
One last thing: Make sure that you are using a 32-bit version of Windows. There is no 64-bit USB driver support from Palm or ACCESS. If you do have a 64-bit version of Windows Vista installed, that would clearly explain why you are having so much trouble getting your m500-series PDA to sync. This thread tells you how to check for a 32 or 64-bit install of Windows.
Alan G -
I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.
Did you try this:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Also see:
HT4061 error message 3014.: Apple Support Communities -
I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.
Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.
-
I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?
-
I'm continually getting a pop-up message on my iPhone asking me to enter my Apple ID password for a email address I no longer use. How do I make it stop?
If you are signed into your current iCloud ID you shouldn't be prompted for the old ID unless there is another service still signed into it. Check the ID in iMessage (Settings>Messages>Send & Receive), FaceTime (Settings>FaceTime), Game Center (Settings>Game Center), the iTunes store (Settings>iTunes & App Store), etc. to make sure you aren't still signed in with the old ID. If you are, tap the ID, sign out, then sign back in with the new ID.
-
When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?
It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
I get an error (2131) message on my Dell Vistro 1700 windows 7 computer when trying to burn a CD
clean and then reinstall, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-
My husband and I share an Itunes account so use the same email address and password. Our iphones are now connected and we get each other's messages and share each other's contacts. How can we stop this happening?
A couple of different approached:
Create a second AppleID for one of you that includes the email address and phone number you wish to use for messaging, but do not apply it to the iTunes and app store (just keep the current one). My wife and I do this and it works quite well. Also allows for easier syncing of Contacts , notes etc. using icloud if you wish to do that.
Add additional emails/phone numbers to the existing account and change the Send/Receive settings for Messages. this will not fix the Contcts isues for you however. -
While my friend was setting up his iphone because i had recently updated it for him he needed a itunes account to use for "bump" so i could transfer his contacts back. So i used my itunes and icloud account to sign in so he could download that because he didnt have any of those accounts. So when i logged in he was basically me, my name was his phones name aswell. Well i used "bump" his name was the same as mine. I got the contacts to work but now every time i send him a text message, (imessage) i get the exact same message from myself. How to i unverify him off of my icloud so i can be the only one using it?
The fact that the problem only occurs when iphones are texting you leads me to think that iMessage may be the culprit. The fact that it is only iphones using SPRINT however is weird. Try turning imessage off on both yours and your sons phones to see if the problem persists. If it does, it may be a carrier problem.
-
Since switching to IMAP and using message filters, I often get duplicate messages in my local folders. I think this is a bug.
That is my guess as to what is happening.
When the IMAP part starts syncing with the server to fill in the inbox, the message filter system starts working before it is done syncing. I appears that the filters runs too quickly because as the filter moves a msg to a local folder, the sync thread think it need to download it again from the server. If the sync with the remote server takes a long time, I could end up with 5 or more copies of the exact same email.
This has always happened for years now but I figured someone would have noticed it and fix it by now. Now I am wondering it it has something to do with my filters or my settings.
Has anyone run into this before?Toys,
I was just doing a search to see if anyone else was feeling this way! I am also at a university and I don't really like see thousands of unread messages in mail. (Fortunately, with Leopard you can select the dock icon to show only the messages in your inbox but I still don't like having the public folder in there).
Please let me know if you find out anything and I will do the same for you. If I have time later I am going to run by our IT office later and ask them. -
I have an IPad 2 and when I woke it up it gave me an error message on the desktop: "iCloud backup: This IPad hasn't been backed up in 3 weeks. Backups happen when this IPad is plugged in, locked, and connected to Wi-Fi." I have done all of these and it still doesn't allow me to get rid of the error message. I even connected the IPad to the computer and attempted to back it up using the Web but it still doesn't get rid of the message. Help!
Reset your iPad to clear that condition:
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Maybe you are looking for
-
Hi, I am getting this message once in a while in Illustrator CS2 : Can't open the illustration : The illustration contains an incomplete or garbled object description. Offending operator ''Bg'' Context : 357.2139 668.8398L 357.2139 669.8477L 161.228
-
i have bought adobe photoshop elements and adobe premiere elements in a bundle pack from a store and i cant find a serial code on the box that works so if someone could help me with that, that would be great!
-
I just had the absolute worst experience ever with some idiot at Adobe's chat support. He took control of my computer and started renaming files to old, without keeping the original name (original.old) like he should have. What he was trying to do d
-
微软发布IE Developer Toolbar Beta版
http://news.csdn.net/news/newstopic/26/26496.shtml 近日,微软发布了Internet Explorer Developer Toolbar Beta版.该产品让开发人员能够深入探索和理解Web页面,帮助开发者更好地创建Web应用. IE Developer Toolbar特性如下: -浏览和修改Web页的文档对象模型(DOM). -通过多种技术方式定位.选定Web页上的特定元素. -禁止或激活IE设置. -查看HTML对象的类名.ID,以及类似链
-
Unicode Characters in Label/JLabels
Hi All, Does anyone know how when any unicode characters within a String get transformed into the character they represent? I ask because I'm getting conflicting behaviour depending on whether the String is hard-coded or read from file at runtime. Fo