Citrix receiver throws "ssl initialisation error 8" when launching citrix apps from firefox on Windows

Hi all,
I recently switched over to mozilla firefox from google chrome as Google has now disabled NPAPI and thus allowing me the inability to launch citrix applications.
I have installed the latest version of firefox and have the latest version of citrix receiver. When i login to my citrix site and try to launch the citrix applications, nothing happens. When i manually launch the ica file, i receive the error. "Unable to connect to the Xenapp server. SSL initialisation error 8".
Please help as i need to get this up and running by this week.
Thanks.
Regards,
Ochen

Unfortunately we can't support plugins here. While still working (some of the time) in Firefox, NPAPI is officially considered legacy, and thus not supported, in Firefox.
I suggest working with Citrix or using Internet Explorer to run XenApps.

Similar Messages

Error when launching promoted app from RemoteAPP

Hi:
We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
"Personalization:
This theme can't be applied to the desktop.
Try clicking a different theme"
Help!
Thank you,
Stangride

If you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
are manipulating themes.

Error-code when launching Time Machine from MacBook Pro

I´ve get this error-code when launching Time Machine: An unaspected error has acourd (errorcode -6584)
Solution on this?

Sounds like OSX has lost track of where it is. Try a "full reset" of Time Machine, per #A4 in Time Machine - Troubleshooting.
If that doesn't help, try repairing your backups, per #A5 there.

I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
[topic moved to Flash Player forum]

HT201412 My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Receiving "Connect to iTunes error" message when trying to purchase gems in Kingdoms of Camelot Battle for the North game even though I was able to do so earlier today.

Receiving "Connect to iTunes error" message when trying to purchase gems in Kingdoms of Camelot game app even though I was able to do so earlier today.

Hello Robidt,
The following article provides information and tips that can help restore your connection to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

Error occurs when loading transaction data from other model

Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
Praveen

Hi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST)

"Error occurs when loading transaction data from other model" - BW loading into BPC

Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
Chris

Hi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris

Uninstalled Old PS Versions - Now Get "One Or More File. . .etc" Error Message When Launching PS CC

I just unistalled PS C3 through 6 on my computer leaving only PS CC for use going forward. Having done this I now get this error message when launching PS CC: "One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop." The thing is PS CC still appears to be working okay once that error message is cleared. How can I get rid of that error message? I can't reinstall using the CC Updater because it still sees PS CC on the system thus it won't install another copy. I'd just as soon not uninstall it and I'm not sure that would fix the issue anyway.
Any ideas?

Hi jpolster,
You can uninstall PS CC through the Control Panel in windows/Utilities in MAC & the reinstall PS CC.
Thanks

"Internal error occurred" when launching Acrobat Pro X (AAMEE 3.1.150.0)

AAMEE 3.1.105.0 generated packages run fine when pushed to Macs that do not have an existing previous version of CS.
However, if pushed to a Mac that has CS4 installed, CS6 installs but Acrobat Pro X will not launch ("Internal error occurred").
We are using the latest Adobe CS6 Design & Web Premium installer DMGs from licensing.adobe.com and we are following the standard workflow.
I know Adobe's position is "We don't recommend or support concurrent installs of Creative Suite" (I get that).
Since OS X lacks package management (ala Yum, RPM, etc.), the term "Uninstall" is vague, but we appreciate Adobe's "cleaner tool".
Unfortunately the "cleaner tool" is only marginally effective, it leaves a mess behind.
And...when "cleaner tool" is used to remove CS4, it whacks CS6.
Wait...it gets worse...when "cleaner tool" is used, we now can't push our CS6 package to the Mac...we get...<drumroll>..."Internal error occurred" when launching Acrobat Pro X.
Someone shoot me...please put me out of my misery.
Why can't deploying CS6 be as simple as...
http://www.toysrus.com/product/index.jsp?productId=3938350&CAWELAID=479925582
Don

OK, we resolved the issue. Apparently there was a ~/Library/ColorSync folder present, not owned by the logged in user, and the logged in user had no access. Given OS X's domain model, it looks like Acrobat Pro X looks at that folder when it launches, even though it doesn't need to, and it can't get into it, so it tosses up the error.
Removing the folder (since it's not needed) resolves the issue. If the folder was needed, we would change ownership and permissions so Acrobat Pro X could access it.
Problem solved.
Thanks,
Don

Encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3

I encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3
I've tried upgrade iphone on three computers , the results are all the same.
One of the computers successfully upgrade my ipad to 8.3.
There are 2GB left on IPhone 5S before I perform the upgrade.
It should be enough for iTunes to finish the process, right?
But in the log, it says "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
why is that?
Any way for me to continue the upgrade? it seems it's almost done.
Thank you
the end of the log is as below:
[10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
[10:36:29.0714] entering fixup_var
[10:36:29.0714] entering update_var_directory_hierarchy
[10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
[10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
[10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
[10:36:29.0714] unable to copy directory: 2
[10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
[10:36:29.0714]
[10:36:29.0714] ==== end of device restore output ====
[10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
[10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
[10:36:30.0542] Restore completed, status:6
[10:36:30.0542] Failure Description:
[10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
[10:36:30.0542] Depth:1 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg）
[10:36:30.0542] Depth:2 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - failed to fixup var）

Hello there, Kenduck.
It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
Get help with iOS update and restore errors - Apple Support
Particularly:
Check your security software
Errors: 2, 4, 6, 9, 1611, 9006.
Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
If you still see the error message, check for USB connection issues.
Thanks for reaching out to Apple Support Communities.
Kind Regards,
Pedro.

The error 16 when launching Photoshop elements 12

Ok I keep getting the error 16 when launching Photoshop elements 12, 1) It says to re-install (did that and did not work twice), there is also the Cache.db unlock (did that - not a solution either)... I need more information on what the problem could be ?

if that's the shared tech error, http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_

App-v 5.0 SP2 hotfix 5, an error occurred when querying the App-V WMI provider

Hi,
We have installed App-v 5.0 SP2 + hotfix 5 (via SCCM 2012 R2 CU1) on some Windows 7 clients. That worked fine but no app-v applications go through.
Error:
AppVPackageQueryClient5X::GetPackageDataByPackageGUID() failed for virtual application [a835fa1-f82a-4efe-957a-8c6678d4a431]. (0x87d01290)   AppVHandler   5/08/2014 10:23:56   3440 (0x0D70)
CAppV5XHandler::DiscoverIndividuleApp() failed. (0x87d01290)   AppVHandler   5/08/2014 10:23:56   3440 (0x0D70)
+++ Discovery of application [AppDT Id: ScopeId_8B8D93AF-5181-48FE-9202-2CFE5FC93EE2/DeploymentType_50eba242-3688-4b4f-9b61-84f0123f667d, Revision: 7] returned an error (0x87d01290).   AppVHandler   5/08/2014 10:23:56
3440 (0x0D70)
CAppV5XHandler::DiscoverApp() failed. (0x87d01290)   AppVHandler   5/08/2014 10:23:56   3440 (0x0D70)
Deployment type detection failed with error 0x87d01290.   AppDiscovery   5/08/2014 10:23:56   3440 (0x0D70)
Failed to perform detection of app deployment type Microsoft - Console, revision 6) for user. Error 0x87d01290   AppDiscovery   5/08/2014 10:23:56   3440 (0x0D70)
Error = 0x87d01290 = An error occurred when querying the App-V WMI provider.
Please advise on this specific error. Should we look for corruption in app-v client, problem in sccm client ...?
J.
Jan Hoedt
Update: clients which don't have problems are client which had hotfix 4 THEN hotfix 5 installed. Should we install it that order? Client WITH problems have App-v 5.0 SP2 then hotfix 5 directly.
Update2: I installed the app-v client via setup.exe, the hotfix 4 also via setup.exe but since it installed all language packs, I decided to extract hotfix 5 and use the msp.
Could that be cause of the issue? I could use the exe of hotfix 5 but then I need to be sure how NOT to install all the language packs.

I think we found a solution ourselves.
My update2 (question) explains it:
Update2: I installed the app-v client via setup.exe, the hotfix 4 also via setup.exe but since it installed all language packs, I decided to extract hotfix 5 and use the msp.
Could that be cause of the issue? I could use the exe of hotfix 5 but then I need to be sure how NOT to install all the language packs.
We installed App-v 5.0 SP2 via exe then installed hotfix via msp (extracted msp), this doesn't seem to work (though installation was succesfull). When we deploy the hotfix via the exe it works correctly.
Not sure why though.
Jan Hoedt

Error occurs when loading transaction data from other cube

Hi Gurus,
I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
Can anybody help me to solve this problem?!
Thanks a lot & Best Regards,
HH

Hi,
Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category=*NEWCOL(ACTUAL)
P_0BASE_UOM=0BASE_UOM
P_0BUS_AREA=0BUS_AREA
P_0COSTCENTER=0COSTCENTER
P_0FUNDS_CTR=*NEWCOL(null)
P_0GL_ACCOUNT=0ACCOUNT
P_0LOC_CURRCY=*NEWCOL(MXN)
P_0MATL_TYPE=*NEWCOL(null)
P_0VENDOR=0VENDOR
P_DataSrc=*NEWCOL(UPLOAD)
P_ZMATERIAL1=0MATERIAL
P_ZMATERIAL2=*NEWCOL(null)
P_ZMATL_CLASS=*NEWCOL(null)
P_ZMATL_TESP=*NEWCOL(null)
P_ZRATIO=*NEWCOL(KF_inpmdInt)
Time=0CALMONTH
SIGNEDDATA=0TOTALSTCK
*CONVERSION
Time=Time_conv.xls
EXTERNAL     INTERNAL
201101          2011.JAN
201102          2011.FEB
201103          2011.MAR
201104          2011.APR
201105          2011.MAY
201106          2011.JUN
201107          2011.JUL
201108          2011.AUG
201109          2011.SEP
201110          2011.OCT
201111          2011.NOV
201112          2011.DEC
Thank you for taking at glance to the files.
Best Regards,
HH

[SOLVED] error message when launching deluge

Hi everyone, i see this error message when launching deluge torrent client ( its not launching at all from menu)
[bb@arch ~]$ deluge
[ERROR ] 00:59:41 ui:168 No module named gobject
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/deluge/ui/ui.py", line 149, in __init__
from deluge.ui.gtkui.gtkui import GtkUI
File "/usr/lib/python2.7/site-packages/deluge/ui/gtkui/__init__.py", line 1, in <module>
from gtkui import start
File "/usr/lib/python2.7/site-packages/deluge/ui/gtkui/gtkui.py", line 37, in <module>
import gobject
ImportError: No module named gobject
[ERROR ] 00:59:41 ui:169 There was an error whilst launching the request UI: gtk
[ERROR ] 00:59:41 ui:170 Look at the traceback above for more information.
Xfce4 as DM
i dont have a clue about this one
thanks in advance
Last edited by memax (2012-05-13 00:49:09)

slithery wrote:
mhelvens wrote:Edit: But wait... Then why did Deluge have an icon in Gnome without the optional dependencies installed?
Because the .desktop file is part of the upstream source, it's always created as part of the build procedure.
I did not mean "what is the direct cause of the icon". I meant "why did the maintainers choose to include the icon when there is no GUI application to link it to" (see below).
I don't see why there is an issue with these optional dependencies at all, the deluge wiki page is perfectly clear on the subject.
The issue is that a broken `.desktop` file is being added. The fact of the matter is that if both Deluge and some window manager have been installed, `pygtk` should become a mandatory dependency. Unfortunately, pacman is not capable of that kind of reasoning.
See an earlier post of mine for some more general problems I have with the pacman dependency system.
Last edited by mhelvens (2014-07-24 13:11:37)

Citrix receiver throws "ssl initialisation error 8" when launching citrix apps from firefox on Windows

Similar Messages

Maybe you are looking for