Citrix saving connection settings

We're deploying Citrix and Contribute works fine. The only problem is when a user logs off, their connection settings are not saved. Has anyone had a problem like this?

Yes I have.
Anju:
Hi
Please check the Status error which you are getting.
The error would be displayed above the Help button located at left corner of the Window
Thanks
... I have the same issue as in the original post. Nothing happens. No Status/Error. Just a button click that does nothing
Jay Smith:
Try running <sqldev>\sqldeveloper\bin\sqldeveloper.exe which will display the java console and see if there are any errors displayed when you try to change the password.
I would suspect a file privilege problem. Can you create and delete connections? Or change other properties?
1. When starting bin\sqldeveloper, I do see an error - _execv() failed, err=2Registered TimesTen.
2. While bin\sqldeveloper is running and trying to change my password or other properties, I don't get any new error messages
3. I can create and delete connections.
4. I can't change any other properties because none of the buttons except for Help and Cancel execute. Save, Clear, Test, and Connect don't do anything
mwichham
On my 3.0.04
I open the connection
change the password to an incorrect pw - save - test my connection - fails
change the password again to the proper one - save - test my connection - success.
This does not change the password to the Database. Only to the connection of SQL Developer to the DB.
Michael
... I tried that as well, but the result is the same. No matter what I do in the connection after it has been created and saved. No changes can be made due to the buttons not executing.
???

Similar Messages

Local machine's taskbar stays in focus after using saved connection settings

I'm not sure if this is the right place to ask as I have only seen this happen on thin clients we use running Windows Embedded Standard 2009. I cannot reproduce the issue on Windows 7 and do not have any XP machines to hand at the moment (having recently
killed them all off).
This is a minor issue but does confuse and annoy some users when they attempt to use these terminals. Basically we have them set up with a saved RDP shortcut that points to our terminal server. When they open this it will connect to the server in full-screen
as intended, however the taskbar of the local machine remains visible and in focus, and anything the user types will not go in the Username field on the remote server. A single click is all that is required to be able to start entering credentials, however
you would understand not all users immediately notice and it is quite annoying.
Any ideas why this happens and how to fix it? It only happens when you use a saved .rdp file and does not happen if you were to open Remote Desktop Connection click Connect.

H,
Based on my experience, it seems to be a Windows Embedded Standard 2009 side issue. Therefore, I would like to suggest you post the question in Windows Embedded Standard forums
for help.
http://social.msdn.microsoft.com/Forums/en-US/home?category=embeddedwindows
Thanks.
Jeremy Wu
TechNet Community Support

PSC 2510 - Wireless setup - "Error while saving the settings to the device."

While trying to setup my PSC 2510 to be wireless I get an error message "Error while saving the settings to the device.". This comes after selecting connecting Through Network, selecting printer device, selecting WEP, entering key, and clicking next.
PSC 2510
Windows Vista
Using latest sfotware from HP to install
Thanks
Dennis
This question was solved.
View Solution.

ISSUE RESOLVED .. based on responce from PrintDoc to penn (refrence topic "C4385 Printer - Netgear DGN2000 - wireless setup".
PrintDoc responce helped me find my problem (to reset network settings on the printer to factory) even though diffrent printer.
Thanks

"No saved connection available" message showing er...

Ok before you start solving things, this error makes no sense.
I have an error message showing in the yellow bar where Charging is shown, or Weather Update 1/1 Done is shown.
The error message is
"No saved connection available"
appears only
- when iclicking the web browser when not connected to wifi or wlan)
- when i click my ip wiget to open up the selection of connection
BUT ... I see my connections I see my wireless lan connection as well as service providers connection and I can connect and go on the internet.
It appears everytime but I always have connection available though ...
Recently Upgrade firmware, currently now Ver. 20.210.36-2 via Nokia Software Updater, which delete all my applications, I did a restore back up that was on my phone to get all my programs and as well as service providers internet settings.
But then this issue came up...
Thanks in advance who ever can figuire this out

I also have the same message since updating to PR1.3, it makes no sense to me either?

How to use JNDI datasource instead of database connection settings JDev 10g

Hi,
In order to use the different database from other environments, we are not able to use the JNDI datasource configuration settings, all the time need to configure the database connection settings from JDeveloper by changing the database connectivity settings in the JDeveloper for each environment separately, need a solution on how to make the database connectivity unique using the JNDI datasource name for all the environments for database connectivity settings through the application server console rather than changing the database adapter configuration in JDeveloper.
Please provide the update at the earliest. Your help is greatly appreciated. Thanks in advance..

What are you not clear on?
What you need to do is get your developers to conform to a database naming standard, as stated above, so if you have an oracle database that is for eBusiness Suite you get all developers to create a DB connection in JDev called, ora_esb as an example.
When the developer creates a DB adapter this will create a JNDI name of eis/DB/ora_ebs. When the BPEL project is deployed it looks for the JNDI name in the oc4j-ra.xml file to see its connection details. If they don't exist then they use the developers connection details. The issue with this is that they generally always point to the development DB. It is best practice for the developers to remove the mcf settings in the DB adapter WSDL. This way if the JNDI name has not been configured it will fail.
So when you migrate from dev-test-prod what you have is the JNDI name eis/DB/ora_ebs. The dev points to the dev instance of ebs, test points to the test instance and so on. This means that you don't need to adjust any code in the BPEL projects.
cheers
James

Error saving column settings with ORA-01403: no data found Error

Hi
I have a region with multi row report updatable.
When I am trying to change the query I am getting below error.
Anybody let me know what will be the problem.
ORA-01403: no data found
Error saving column settings
Regards
Kiran

Hi
I was using below query for this region.
SELECT
result.segment1 Item#,
          result.inventory_item_id,
          result.revision,
          result.lot_number,
          result.Lot_Onhand,
          result.Heat,
          result.Cert_Site_Number Cert_Site_Number_Display,
          result.status_code Status_Code_Display,
result.Cert_ID Cert_ID_Display,
          result.Cert_Site_Number,
          result.status_code,
result.Cert_ID,
          result.transaction_id,
result.po_header_id,
result.po_line_id,
result.rcv_transaction_id,
result.shipment_header_id,
result.shipment_line_id
FROM
SELECT
msi.segment1,
          mmt.inventory_item_id,
          mmt.revision,
          mtln.lot_number,
          xx_utility_pkg.get_available_qty(mmt.inventory_item_id,mmt.organization_id,mmt.subinventory_code,mtln.lot_number,'ONHAND') Lot_Onhand,
          mtln.attribute1 Heat,
          mtln.attribute2 Cert_Site_Number,
          mms.status_code,
                    (          SELECT     clx.cert_id
                    FROM     xxqc.cert_mst cm,
                              xxqc.cert_lot_xref clx
                    WHERE      cm.cert_id = clx.cert_id
                    AND cm.cert_type='MILL'
                    AND     clx.lot_no = mtln.lot_number
          ) Cert_ID,
          mmt.transaction_id,
          rsl.po_header_id,
          rsl.po_line_id,
mmt.rcv_transaction_id,
rt.shipment_header_id,
rsl.shipment_line_id
FROM      mtl_material_transactions mmt,
          mtl_transaction_lot_numbers mtln,
          mtl_material_statuses_tl mms,
          rcv_transactions rt,
          rcv_shipment_headers rsh,
          rcv_shipment_lines rsl,
mtl_system_items_b msi
WHERE     mmt.transaction_id = mtln.transaction_id
AND          mmt.organization_id = mtln.organization_id
AND          mtln.status_id = mms.status_id
AND          rt.transaction_id = mmt.rcv_transaction_id
AND          rsh.shipment_header_id = rt.shipment_header_id
AND          rsl.shipment_header_id = rsh.shipment_header_id
AND          rsh.organization_id = mmt.organization_id
AND          rsl.item_id = mmt.inventory_item_id
AND msi.inventory_item_id=rsl.item_id
AND msi.organization_id = mmt.organization_id
AND          rsl.po_line_id = DECODE(:P5_PO_LINE_NUMBER, 0,rsl.po_line_id,:P5_PO_LINE_NUMBER)
AND rsl.po_header_id IN (     SELECT     po_header_id
                    FROM      po_headers_all
                    WHERE      segment1 = :P5_PO_NUMBER
                    AND      org_id = :P5_ORG_ID)
AND          mtln.status_id = 90 -- Which is 'T' Status means Temporary
AND          mmt.transaction_action_id = 27
AND          mmt.transaction_source_type_id = 1
AND          mmt.transaction_type_id = 18
) result
WHERE result.Lot_Onhand > 0
when I use above query I am able to update the region perfectly.
But when I comment last WHERE CONDITION I am getting above problem.
What could be the possilbe reason for this?
Regards
Kiran Akkiraju

Are there any connection settings for using rtsp:...

In my effort to get access in 'YouTube" steaming videos, I tried to find the scope available in Nokia 3110C handset. After going through the Menu icons, I identified one Menu Item in the path : MAIN MANU>MEDIA>MEDIA PLAYER>GO TO ADDRESS. It is...rtsp://. The help message states ...'Lets you manually enter Web Address...'. I entered : ' rtsp//m.youtube.com. The response was a Note which reads - Check Connection Settings... Again I followed the above path : MAIN MANU>MEDIA>MEDIA PLAYER>STREAM SETT. I click the Stream Settings. The nesponsing note : 'No Settings found. Contact your Service Provider'. So, from the above discussion the net learning I got is I must have the Stream Settings to get YouTube going in my Set. My querry is : Whare those settings and what is the source in getting those settings ? I understood the rtsp (Real Time Stream Protocol) is more versatile than HTTP and MMS in getting Streaming data (numerical, photograph/radio). Please suggest.

I experienced same problem with my 3110c handset. At first the STREAMING SETT was shadowed dark with a restriction to get access there. Later I got contact with BSNL (my SP). After downloading the settings I discovered that the shadowy patch over Streaming Sett. has gone. It now shows an entry ..."bsnlstream."
So far an attempt was made to activate the Youtube, a message reminds me that the software of 3110C is not supporting such application.

Can't Create Saved Connection in 11g (Discoverer Plus).

We're getting ready to go live with a new installation of Discoverer Weblogic 11g, but we have run into a problem. We are getting errors when we have any user try to create a saved login connection from their login screen. We hit "Create Connection" and enter all the required login info (as we always did with our 10g version), but when we hit 'Apply' or 'Apply and Connect' we get the following errors.......
A connection error.
- Oracle BI Discoverer Viewer cannot save the connection. Check for other errors.
- ORA-04063: package body "PROD_DISCOVERER_PS.WWSSO_API_PRIVATE" has errors ORA-06508: PL/SQL: could not find program unit being called: "PROD_DISCOVERER_PS.WWSSO_API_PRIVATE" ORA-06512: at line 1
Users can login just fine when they enter all their info on the login screen, this is only happening when we try to create the saved connection. Is anyone else running into this on 11g? Is there a setting we are missing or something? Maybe something in the pref.txt file? Any help would be appreciated, especially since we are being asked to go live soon. Thanks!
Here is our system setup:
Oracle BI Discoverer 11g (11.1.1.4.0)
Oracle Business Intelligence Discoverer Plus 11g (11.1.1.4.0)
Discoverer Model - 11.1.1.4.0
Discoverer Server - 11.1.1.4.0
End User Layer - 5.1.1.0.0.0
End User Layer Library - 11.1.1.4.0
Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Java Virtual Machine:     Sun Microsystems Inc. 1.6.0_29
JVM Memory Available:     9046KB out of 37372KB
Operating System:     x86 Windows XP 5.1
Using protocol: RMI protocol over JRMP transport

Additional info:
Based on the error messages, we can see something is wrong with the package being called. We had a long running help ticket with Oracle opened, but in our opinion, it was not really resolved. We provided the following info after a request from Oracle....
The package does exist. The package is valid but the package body is invalid due to missing dependant objects
It is owned by PROD_DISCOVERER_PS.
The database version is 11.2.0.1.0 (64 bit)
SQL> select OWNER, OBJECT_TYPE
+2 from all_objects+
+3 where object_name = 'WWSSO_API_PRIVATE';+
OWNER OBJECT_TYPE
PROD_DISCOVERER_PS PACKAGE
PROD_DISCOVERER_PS PACKAGE BODY
We have tried to recomplie the package, still invalid.
After some further questions we were asked to provide info on the app_registry.......We got an error when trying that.......
The app_registry object does not exist ...
SQL> connect sys as sysdba
Enter password:
Connected.
SQL> select comp_id,version,status from app_registry;
ERROR at line 1:
ORA-00942: table or view does not exist
In the end (after a lot of back and forth), Oracle could not reproduce our problem on their test system. Because their test system uses Enterprise Edition and we installed Standard Edition, their solution was that the issue is caused because we are using Standard Oracle DB and we should be using Enterprise Edition. Creating a saved connection doesn't sound at all like something that would be affected by Standard or Enterprise edition. That's not an easy "solution" for us right now, and we can use a real fix. That's like taking your car into the shop because your blinkers don't work on your 2010 model car and the dealer's solution is "Oh, your 2010 car blinkers don't work? We have a 2011 model and they work just fine. You'll need to buy a 2011 car so the turn signals function."

XI and R/3 System connection settings for IDOC to File scenerio.

Hi SAP champs,
I am working on a IDOC to File XI scenerio. But I am confused while configuring connection settings at XI system and R/3 system. I am finding problem in transaction IDX2 to maintain the IDOC metadata. Please let me know the complete step by step system cofigurations in XI and R/3 systems for the scenerio. Thanks in advance..
Regards
Sanjeev.

Hi Sanjeev,
We upload Medata in IDX2 to just reduce runtime effort and hence to improve the performance. However it is not a mandetory step to be performed for R/3 TO XI scenario.
You are confused just because here you dont find any F4 help to select the metadata and the PORT.
Thanks
Sunil Singh

You may need to configure the connection settings in the deployment descrip

Hi All
I am new to BPEL and going through Order Booking Tutorial (using 10.1.3.4 version of opmn ) .
I have a problem in 'Designing the Database Adapter to Insert Data' Chapter.
I have installed Oracle 10g Express Edition and BPEL Process Manager on my local system.
In the Example it has been asked to create a daabase connection with Third Party JDBC Driver. Instead I have created a database connection with Oracle(JDBC) Driver.So i didnt have to register any third party driver.
I cud access the Order/OrderItems table as well .
I Deployed the same on the server.But while running the process I get following error--
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
nested exception is:
     ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore. [Caused by: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
The Connection descriptor used by the client was:
localhost:1521:XE
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I have checked several post on this error but every post talks about third party database.I have used Oracle Database only so why/What shud I change anything in oc4j-ra.xml?? This is my doubt .
Pls help me on this .Also Let me knowe in my case is there any need to create the datasource.?I am low at concept of database.
Pls help
Regards
Naveen

Hi
I am trying to insert orader and order Items as given in the Order booking tutorial..
Here are the files description
.wsdl file looks like
<service name="DBInsert">
<port name="DBInsert_pt" binding="tns:DBInsert_binding">
<jca:address location="eis/DB/MyConnection"
UIConnectionName="MyConnection"
ManagedConnectionFactory="oracle.tip.adapter.db.DBManagedConnectionFactory"
mcf.DriverClassName="oracle.jdbc.OracleDriver"
mcf.PlatformClassName="oracle.toplink.platform.database.oracle.OraclePlatform"
mcf.ConnectionString="jdbc:oracle:thin:@localhost:1521:XE"
mcf.UserName="system"
mcf.Password="6672B62098892995C8B651EFDF798A59"
/>
</port>
</service>
data source file looks like
<connection-pool name="MyConnection">

<connection-factory factory-class="oracle.jdbc.OracleDriver" user="orabpel" password="->pwForOrabpel" url="jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=nakhanna)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE)))"/>
</connection-pool>
<managed-data-source name="MyConnection" connection-pool-name="MyConnection" jndi-name="jdbc/MyConnectionDS"/>
</data-sources>
oc4j-ra.xml looks like
<connector-factory location="eis/DB/MyConnection" connector-name="Database Adapter">
          <config-property name="xADataSourceName" value="jdbc/MyConnectionDS"/>
          <config-property name="dataSourceName" value=""/>
          <config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
          <config-property name="usesNativeSequencing" value="true"/>
          <config-property name="sequencePreallocationSize" value="50"/>
          <config-property name="defaultNChar" value="false"/>
          <config-property name="usesBatchWriting" value="true"/>
          <connection-pooling use="none">
          </connection-pooling>
          <security-config use="none">
          </security-config>
     </connector-factory>
##################################################################3
Still I get the same error .
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_FulfillOrder_4.0_e77c64251e45eb4711a3a093f92e6a86.tmp/DBInsert.wsdl [ DBInsert_ptt::merge(OrdersCollection) ] - WSIF JCA Execute of operation 'merge' failed due to: java.util.MissingResourceException
java.util.MissingResourceException
; nested exception is:
     ORABPEL-00001
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault>
Pls let me know if something looks wrong in the above files
Thanks
naveen

Unable to apply connection settings. The detailed error message is: 'NoCount' is not a recognized option

My corporate database wizards have created a login for my small subsidiary to use to read selected data from the HR database. It's meant to be used by an SSIS package to bring over data on who's a current employee and who's not.
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login I get the following message:
"Unable to apply connection settings. The detailed error message is" 'NoCount' is not a recognized option."
If I click on OK I can still log in, but it looks like this error is causing SSIS to produce an error. I've seen articles on vaguely similar errors logging onto an Azure database, but this one's on SQL Server 2012.
Anybody got any ideas? Is there something I can change at my end, or is it a change that has to be made in the remote DB?

I'm getting confused seeing this
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login
I get the following message:
Whats the purpose of SSIS package if you're trying to connect to DB using SSMS?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Error saving connection - jdev

Hi ,
I am strying to create a Webservice Data control from a wsdl generated from a SOA process deployed in the server and when I click on the finish button during the configuration in Jdev - It gives null pointer exception - Error saving connection.
The Connections.xml is empty. Is this a bug in Jdev.
Can some one guide a what needs to be done.
Thanks,
Robin

Hi,
What is your JDev Version?

Help required with (soundcard) connection / settings, thanks in advan

Help required with connection / settings between a Creative Sound Blaster Audigy Platinum EX (soundcard) and a Creative DTT3500 Digital (5. speakers).
The problem
No sound from any of the speakers. (Exception can plug in headphones at front)
Background
My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). However after reconnecting speakers and restoring the original settings I?m getting no sound from any of the speakers. I?ve followed all the available advice/instructions I can find on this website and manuals to no avail.
Set-up
Physical
(Digital DIN) Speakers/decoder amplifier (DTT3500) connected to the (digital out) soundcard (Audigy Platinum EX) using minijack to DIN cable. (As per instruction manual)
Software
Creative Audio Consul ? setting as per instructions, however have tried variations in vain. (Note: above tabs there is a select device box with SB Audigy [A0000] in it ? only option. Just wondering what [A0000] means?)
Your advice please. A simple step by step guide would be appreciated, many thanks in advance, Jon

"My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). "
Do you have the original installation disk?
If so, try installing THOSE drivers, ESPECIALLY if it worked before. Be sure to uninstall what is there now, first.
Its natural for most people to want the 'latest' drivers for their hardware. However:
After experiencing some difficulties with some CL 'updates' for certain products, I now avoid them UNLESS I am having a PROBLEM with the existing drivers.

Can you retrieve a task list for a user without specifying that user's connection settings?

Hi
I would like to know if it is possible to obtain a list of workspace tasks for a user of my choice. In the following code, taken from the relevant quickstart, I am able to retrieve a list of tasks for "administrator" because it is the "administrator" settings specified in the connection properties when obtaining an instance of ServiceClientFactory. If I wanted to obtain a list of tasks for user "greg", for example, is there a way I can do this without having to specify the settings for "greg" in the connection properties? I tried to invoke the setUserId() method of the TaskFilter interface but no tasks are returned for user "greg" in that scenario. The aforesaid user has 3 tasks assigned to him. If I specify the user name and password for "greg" in connection settings, I am able to retrieve his list of tasks successfully. However, this is undesirable because I want to be able to retrieve a list of tasks for any user of my choice, by passing a parameter. Is that possible? Code follows:
//Start of code
import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
import com.adobe.idp.taskmanager.dsc.client.TaskManagerClientFactory;
import com.adobe.idp.taskmanager.dsc.client.TaskManagerQueryService;
import com.adobe.idp.taskmanager.dsc.client.query.StatusFilter;
import com.adobe.idp.taskmanager.dsc.client.query.TaskFilter;
import com.adobe.idp.taskmanager.dsc.client.query.TaskRow;
import java.util.Iterator;
import java.util.List;
import java.util.Properties;
public class RetrieveTaskInfo {
    public static void main(String[] args) {
        try {
            //Set connection properties required to invoke LiveCycle
            Properties connectionProps = new Properties();
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_EJB_ENDPOINT, "jnp://localhost:1099");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,Service ClientFactoryProperties.DSC_EJB_PROTOCOL);
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
            //Create a ServiceClientFactory object
            ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
            //Create a TaskManagerQueryService object
            TaskManagerQueryService queryManager = TaskManagerClientFactory.getQueryManager(myFactory);
            //Define search criteria by performing a search on
            //Assigned tasks (tasks assigned to the user specified
            //in connection properties)
            TaskFilter filter = queryManager.newTaskFilter();
            StatusFilter sf = filter.newStatusFilter();
            sf.addStatus(StatusFilter.assigned);
            filter.setStatusFiltering(sf);
            //Perform the search
            List result = queryManager.taskList(filter);
            //Create an Iterator object and iterate through
            //the List object
            Iterator iter = result.iterator();
            while (iter.hasNext()) {
                TaskRow myTask = (TaskRow)iter.next();
                //Get the task identifier value
                long taskId = myTask.getTaskId();
                //Get the status of the task
                long taskStatus = myTask.getTaskStatus();
                //Get the name of process on which this task is based
                String processName = myTask.getProcessName();
                //Get the task description
                String taskDes = myTask.getDescription();
                System.out.println("The task identifier is " + taskId + "\n" +
                        "The status of the task is " + taskStatus + "\n" +
                        "The name of the process on which the task is based is " + processName + "\n" +
                        "The task description is " + taskDes);
        } catch(Exception e) {
            e.printStackTrace();
//End of code
Thanks
Darren

Paul,
Thanks very much, I never tried just asking for the parameter I was looking at the entire list coming back from a query with no filters. Using the DBMS_LDAP package you can in fact get their GUID.
I understand your concern for the use of the field and for other reasons have moved to a different identifier to tie OID accounts to our internal application user accounts.
Thanks very much, I'm still glad to know how to do get at the info.

Is there a way to password protect the access options pannel, in particular the Connection Settings?

Is there a way that access to the Options panel can be locked by an administrator. In particular I would like to block a user from being able to change the proxy server settings in Tools > Options > Advanced > Network > Connection Settings. I would like to be able to lock the settings to (Use system proxy settings). The OS is windows 7 standard user account controlled by a windows small business server 2008.

You can lock the related network.http prefs to prevent users from changing the settings.<br />
That will only make it impossible to change the prefs on the <b>about:config</b> page directly.
*http://kb.mozillazine.org/network.proxy.type
*http://kb.mozillazine.org/network.proxy.%28protocol%29
*http://kb.mozillazine.org/network.proxy.%28protocol%29_port
Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
See:
*http://kb.mozillazine.org/Locking_preferences
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes

Citrix saving connection settings

Similar Messages

Maybe you are looking for