Citrix XenApp Unable to Open Published Applications. Via UAG Trunk

Good Morning,
I'm trying to publish XenApp through a UAG trunk. When I click in the XenApp icon I am presented with the Citrix login page and am able to log in. However, if I try to open any application I am prompted to either open or save the ICA file and on clicking
open I always get the following message, "Unable to launch your application. Contact your helpdesk with the following information: Cannot connect to XenApp server. There is no Citrix XenApp server configured on the specified address." If I log in
to the UAG server I can connect to the Citrix server and run all applications without error. If I save the ICA file the contents are as expected and the correct server is listed.
Forefront UAG is running a two node NLB array with SP4 and Citrix is published via an F5 load balancer.
Any ideas out there?
Thanks.

hi patrick,
this problem is not solvable on the serverside since this is a desktop integration problem. since you want to use excel as your editor you have to use excel's client side software.
oracle drive purely addresses desktop integration and is not meant to be a server side component. it is a webdav client and for that only ensures that the communication between the client and the portal server has as much useful functionality as possible.
the only other option that i see is downloading the document to the client, update it and copy it back up to the portal server, which is cumbersome.
all webdav clients are client side software that is either shipped with the OS (MS webfolders) or needs to be installed on the client (oracle drive).
you could check if there is software availble that is an excel plug-in for internet explorer which at the same time talks webdav to portal. not sure if this exists ?
regards,
christian

Similar Messages

  • Please help me with formatting the os 10.6.8 without the cd..unable to open any application and i dont have the installation cd.

    Hi
    I am using mac 10.6.8 and unable to open any application as well as system preferences. I don't have the cd's as well.
    So tell me what can i do i want to reinstall my os without the cd.
    Please help

    Safari->Empty cache, quit and relaunch Safari. This link works here: Mac OS X 10.6.8 Update Combo v1.1
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.

    I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.
    Also, does reinstallation takes the back up automatically or the files will be lost. Please help.

    Here are a bunch of scripts to get folder size under all circumstances.  Take your pick.
    https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
    ¯\_(ツ)_/¯

  • Unable to open any applications in administrator account

    My OS is 10.6.2. Just tonight, I was unable to open any applications in my administrator account (Safari, iCal, iTunes, calculator, system preferences, etc.). In other words, I can't do anything while logged into my administrator account. However, everything works fine if I log into the guest account. Any suggestions? I have restarted my computer and that did not help.

    What happens when you try to launch applications? Do you see error messages?
    Check the behavior in Safe Mode by restarting the computer with the Shift key held down. Booting will take a while longer--this is normal, so just be patient.
    ~Lyssa

  • Cannot open HFM application via Workspace

    Hi
    At times users cannot open HFM application via WorkSpace.When they open an application they can see the progress bar and the application does not come back(HUNG).
    Looking into the logs at the time of incidents we find the following from the logs
    An unknown error has occurred in the HsvDSSystemInfo object.
    System Message Details
    Error Reference Number: {16E56999-6F2A-4905-99D5-B65C14A14F81} Num: -2147210624; User: Type: 0; DTime: 21/09/2009 12:39:54 PM; Svr: AU02UAP093QAN32; Application:
    File Error List
    File: CHsvDSSystemInfo.cpp Version: 9.3.1.0.1502 Line: 1981 Error: (-2147210624)(0x80042A80)(An unknown error has occurred in the HsvDSSystemInfo object.)
    XML Error String
    +<?xml version="1.0" ?>+
    +<EStr>+
    +<Ref>{16E56999-6F2A-4905-99D5-B65C14A14F81}</Ref>+
    +<User></User>+
    +<DBUpdate>157330616</DBUpdate>+
    +<ESec>+
    +<Num HEX=0x80042A80>-2147210624</Num>+
    +<Description Src=HFM>An unknown error has occurred in the HsvDSSystemInfo object.</Description>+
    +<Type>1</Type>+
    +<DTime>21/09/2009 12:39:54 PM</DTime>+
    +<Svr>AU02UAP093QAN32</Svr>+
    +<File>CHsvDSSystemInfo.cpp</File>+
    +<Line>1981</Line>+
    +<Ver>9.3.1.0.1502</Ver>+
    -<DStr>ORA-01400: cannot insert NULL into ("HFMOWNER"."QANTASHFM_USERPARAMS"."PARAMETERKEY")</DStr>-
    +<ExErr></ExErr>+
    +<PSec>+
    +<Param>INSERT INTO QANTASHFM_USERPARAMS (Username,EntryIDX,ParameterKey,BLOBData) values(N'admin@Native Directory',1,N'','19')</Param>+
    +</PSec>+
    +</ESec>+
    +</EStr>+
    Is this a known issue? What are the steps to resolve this issue?
    Thanks in Advance

    Hi Manoj,
    Please check the following points
    Is shared service is running
    Is HFM application thick client working
    Is application been creataed, if yes, is that application registered with shared services.
    Check Workspace services is running or not, and Hyperion Financial Managment services is running or not.
    Make sure that all services are running before you open workspace.
    Let me know what your system gives messages.
    Regards
    Raj - Learner

  • Unable to open all applications on my iphone 3g

    Hi there, I'm wondering if anyone has experienced this issue before and what I can do to rectify it.
    I am unable to open any applications on my iphone 3g. When I select an application it will begin to load and then immediately close. This is happening with all applications, so I am unable to use any of them. I have tried resetting all my settings on the phone and turning off the phone for an extended period of time. It has been like this for about 2 days.
    I am not sure what I can do to fix this, can anyone help?

    To get the most useful help you should give more info such as the iPhone OS version, your computer OS, and iTunes version.
    Sometimes this is caused by a corrupted metadata file and is fixed by downloading a new app to the phone.
    If not, take the usual troubleshooting steps:
    Reset phone - press both home and sleep/wake buttons until the Apple logo appears.
    Restore in iTunes using a backup.
    Restore as a new phone.
    Message was edited by: modular747

  • Why am I unable to open many applications on my macbook pro?

    Why am I unable to open many applications on my macbook pro?Uu

    That is indeed very strange.
    Do you have Flip4Mac installed?, this seems to be the cause, read all the posts here for complete removal.
    https://discussions.apple.com/thread/2399457?start=0&tstart=0

  • Display "Application over 20MB" when I type OK button, the appearance will not go away and make me unable to open other applications, what to do and whether it must be restarted

    display "Application over 20MB" when I type OK button, the appearance will not go away and make me unable to open other applications, what to do and whether it must be restarted?

    The 20 meg message is the download limit for 3G. If you can't get rid of the 'OK' message then you can do a reset by pressing and holding both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    You should be able to download the apps by switching to wifi on your iPad or downloading them on your computer's iTunes and syncing them or dragging and dropping them over to the iPad device.

  • Unable to open Apple application

    Last week, I did the most current software updates. Ever since then, I have been unable to open certain Apple programs such as iChat, Skype, Preview, Pages, Photo Booth, etc. I have tried to download AIM, but the computer says it isn't supported. Also, now when I try to open Photo Booth, it says my graphics card doesn't support it, but I have never changed the card from the one the computer came with. The programs will open up, and then immediately quit, and I am left with "The application _____ quit unexpectedly" message. No matter how many times I relaunch and reset, ignore, or report, I can't get them to open. I'm in college and really have no way to get to a Genius Bar for a few more weeks, and I don't have the Leopard disk with me. Is there any way I can fix this on my own? Thanks!

    I think it was the repair disk permission that actually worked for me. I tried it once and got no result, and then tried to download the updater. For whatever reason, I couldn't even download that. So I went back and did the disk permission repair again. It still didn't seem to work, so I just turned the computer off out of frustration. When I turned it back on, it was all fixed. So I'm not entirely sure what it was that fixed it...all I know is it works now!

  • I am unable to open any applications and the top menu bar (while everything else freezes) disappears about a minute after powering on my macbook.

    A little while back, I attempted to write files to a disk, and then my computer went to a screen that I remember looking similar to thishttp://i44.tinypic.com/mheyy1.jpg After going in to speak with apple, they tried to reset specific settings and ended up erasing the majority of the files on my computer. After all this, my computer began to function terribly and finder would not respond. I did a software update just now and upon doing so my menu bar at the top of the screen is visible only for a moment before disappearing. When I try to open any application, the icon turns to a TXT icon and will not open. I am unable to do much of anything on my macbook right now. Thanks for your help!

    These files were lost two years ago.
    That's not consistent with what you wrote in your first message. I can't help you unless I know what's going on. Either you do, or do not, have backups of all the data you want to keep. If you do not, then the first thing you need to do is back up those files. It makes zero sense to do anything else. In order to back up, you'll need either of two things: another Mac, in working order, with a FireWire port and enough space on its internal drive to hold your files; or an external drive, also with enough space.
    On the other hand, if you do have backups, or if you simply don't care about any of the data, then the solution to your problem may be quite simple. All you have to do is boot from your installation disc (your profile says you're running Mac OS 10.5), erase your internal drive, reinstall the Mac OS, then restore your data from backup. You will need to be selective in restoring software, because incompatible software may be what caused the issue.
    But it's also possible that you have a hardware failure, in which case you can't get your computer working again until it's repaired.

  • I have updated Adobe AIR and unable to open previous applications Getting Error

    I have updated Adobe AIR and unable to open previouly instalkled applications which works on adobe AIR.
    While updating the application iam getting an ERROR # 16824 and iam unable to run the software as well.
    iam not a coder, so plz help me reactify the issue: URGENT

    What application are you having problems with?  Can you uninstall the AIR update and reinstall an older version (AIR 4 or 13) located here:  Archived Adobe AIR SDK versions

  • Unable to advertise software application via Software Center

    I have an issue of advertising my software application via software center. I doesn't matter if I set it to deploy as Required or Available, the deployment just could not get to install to my targeted machine or appear in my Software Center. In the
    deployment status, it also shows No Status even I have targeted since last week and the targeted machine is always connected.
    I have viewed the execmgr.log, but could not find the package id in the log. Could it be stuck somewhere that could cause it unable to complete the process of advertising it to the targeted machine, whether it is via Required or Available deployment?
    I am however able to deploy old/new the patch updates deployment and able to install the software package to my DP. However im still able to get OLD deployment of software apps or TS but not
    NEW deployment of any software apps or TS since the last 2 weeks. I am also able to mplist and mpcert from the targeted machine to my MP, so meaning it could communicate to get policies.
    Im stuck now. Any other logs in particular that could help me right now to determine the root cause?

    There is a constant error of
    1) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420076-DE4001C2-22DFAA8D from the Policy table
    2) Failed to update policy DEP-DE420076-DE4001C2-22DFAA8D and policy assignment {ecadc449-d862-4ad9-b75e-252d753ced8f} based on package DE4001C2, program Install (TS DC_Demo) and offer D
    3) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420081-DE4001C2-22DFAA8D from the Policy table
    4) Failed to update policy DEP-DE420081-DE4001C2-22DFAA8D and policy assignment {43af1ebc-32b5-459b-8749-573a87df22b8} based on package DE4001C2, program Install (TS DC_Demo) and offer D
    5) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420076-DE4001C2-01D4CDDC from the Policy table
    6) Failed to update policy DEP-DE420076-DE4001C2-01D4CDDC and policy assignment {f4041e0f-da02-4c6e-8a25-62e95a123abb} based on package DE4001C2, program Install (TS HR_FI) and offer D
    7) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420081-DE4001C2-01D4CDDC from the Policy table
    8) Failed to update policy DEP-DE420081-DE4001C2-01D4CDDC and policy assignment {d7884252-9e8b-4854-b175-a0c797130930} based on package DE4001C2, program Install (TS HR_FI) and offer D
    9) Failed to create policy and policy assignment based on package DE4003E6, program Install (TS) and offer DE420076
    10) Failed to create policy and policy assignment based on package DE4003E7, program Install (TS) and offer DE420076
    I don't understand why it keeps on saying "based on package DE4001C2". I don't have any package with this package ID.... Not sure why I am seeing this in my logs.

  • Open local application via KM-Link

    Hi there,
    we have a customer who uses a custom developed signed applet to open local applications in a IBM Websphere Portal. The links can be removed/modified/deleted by the end user. Is there a way to use such a applet in combination with KM-Links? Can I specify a file extension in the KM which automatically calls a portal service (which contains the applet)? I don`t think a conversion of the IBM-portlet is possible (or worth doing it) cause it uses own database tables etc.
    Thanks & regards, Jens

    Hi Jens,
    One option you might look at if you can't get it going
    with external links is to is creating an XML Forms
    project where the user can enter the the file path. The
    path could be stored in the schema. Then on the show
    form you could have a link or button to start the
    applet, although you might have to tweak the XSL to get
    what you want (i.e., pull in the static part of the
    href). I don't know if this is a tenable solution for
    you, but it might provide another area to look at if you
    can't pull it off with just external links.
    In other words, you could hack up a basic XML Forms
    project to get what you want, although you have to be
    careful not to ever edit the project with the forms
    editor again since that might overwrite your changes.
    Regards,
    Darin

  • Unable to open downloaded applications - Indesign & Illustrator

    Hi - I purchased a one year subscription for Indesign and Illustrator yesterday.   However, the entire suite downloaded after quite a few hours.  I am unable to open InDesign & Illustrator.   I keep getting an Adobe comment box saying something like - to renew your subscription with a link or the message try again in 15 minutes.   I had downloaded the updated Download Assistant.   This is very frustrating as I need to work on some files I had created previously when I took out a subscription a few months ago which expired due to an accounting issue.
    I would appreciate your assistance
    Sue

    Sign in or activation errors
    Mylenium

  • Mail Icon is missing, and unable to open from Applications.  (Mail 3.6 is not supported is the error message)  I am on Lion OSX 10.7.3.

    I closed the mail folder when I did a software update.  This morning, the mail icon is missing, and am not able to open from applications, or find it anyware in the toolbar.    Error message says that Mail 3.6 is not supported by OSX Lion 10.7.3

    Xcode 4.x cannot be installed on Snow Leopard.  You need a 3.x.  So if that is what you used then yes, you need to install lion.   If connect.apple.com still alows registration or logins using an existing appleid then you could download the last xcode 3.2.6 for free.

Maybe you are looking for