Cityville won't run with laterst FF/Flash combo & Flash 10.3 won't install

I can get Cityville to load for a bit before crashing, but I can't post bonuses (and a few other things). I've cleared FF cache and Flash cache several times. (And it works fine in Chrome, but I would prefer to use FF.) While Googling for answers, I saw on Gamers Unite where someone posted that Flash 11.3 isn't compatible with the latest FF, and to uninstall Flash 11.3 and install 10.3 instead. Unfortunately, the Adobe 10.3 installer won't complete because it's not the latest version.

Have you tried using Image Capture (Finder > Applications > Image Capture) with the scanner? Also see http://support.apple.com/kb/HT4505

Similar Messages

New Mac Book w/Lion. Can't find Pages or Keynote. Won't run with the old 09. Doesn't it come pre installed?

Old Mac Book hard drive failure. New Mac Book Pro w/Lion pre installed. Restored from back up but Pages and Kenote has error/ problem with software. I'm assuming it's out of date. Doesn't Lion come w/these programs or am I missing something?

No, Mountain Lion does not come with iWork programs. Check your account in the App Store and see if you can download them. If not you'll need to purchase them.

Powerbook G4 won't charge battery or run with power adapter plugged in.

My Titanium Powerbook G4 will not charge the battery or run with the power adapter plugged in. When plugged in the power adapter doesn't change to amber showing its charging. Instead it has a green light that flashes off and on. I thought it was a defective power adapter but when its plugged in to another powerbook its seems to be working properly. I reset the PMU but that didn't help. I have been unable to find anything that would tell me what a flashing green means.
Powerbook Titanium G4 Mac OS X (10.3.9)

Hi, Marshall. With no power being supplied to the Mac for several months, not only has your main battery gone flat (and may never again be able to take a charge), but your internal backup battery has also gone flat. A Tibook with a dead backup battery generally will not start up at all, even with AC power connected.
Try this: remove the main battery and leave the AC power adapter connected overnight in an attempt to recharge the backup battery. If the Powerbook won't start in the morning under AC power, the backup battery is shot, has lost the ability to be charged, and must be replaced.
If the PB starts up in the morning on AC power, set the date and time correctly, shut the computer down, insert the main battery, and allow 48 hours with AC power connected in an attempt to charge the main battery. Then disconnect the AC adapter and try to start up under battery power. If that doesn't work, and no lights or only one flashing light appear when you press the power-indicator button on the battery, you'll have to replace the main battery.
http://www.apple.com/batteries/notebooks.html

The latest Firefox won't run with Mac OS 10.4.11. How can I get the previous version of Firefox?

I have Firefox 12.0. It won't run with Mac OS 10.4.11. I do not want to have to buy a new computer right now. I would like to go back to a previous version of Firefox that will run with my operating system. How can I download an older version of Firefox?

You can find the latest Firefox 3.6.x release in all languages and for all Operating Systems here:
*ftp://ftp.mozilla.org/pub/firefox/releases/latest-3.6/

Vids won't run with Safari, but work with FireFox just fine

I can't get vids to run with Safari. Where the vid is supposed to be, on YouTube etc, it's just blank. They run fine with FireFox, though. I don't mind using FireFox, its a great browser. I just don't like the idea of something being wrong with my MacBook.

Make sure your plug-ins are enabled in Safari (preferences) and that you're not using Rosetta mode (Get Info window).
http://www.adobe.com/shockwave/download/alternates/
Uninstall Flash and reinstall the software.

Better to run with an older version of Flash (11.2) or with the latest with protected mode off?

The newest version of Flash (12) doesn't work correctly on my Windows 7 system(using Firefox). I tried fixing the issue in many ways (reinstalled my video driver, disabled hardware acceleration, clean Flash install, etc.) without luck. The only thing that worked was the "last resort" (found that the bottom of this article: http://forums.adobe.com/message/4468493): disabling protected mode. My question is "Is it better for me to run with an older version of Flash (11.2) or with the latest version with protected mode turned off?" Thank you,

You should always run the latest version, with one exception, which wouldn't apply in your case (PowerPC Macs CAN'T run anything newer than 10).
That's with or without Protected Mode enabled.

MOVED: Won't run with 2 CPUs

This topic has been moved to Server/workstation.
Won't run with 2 CPUs

Okay. Power supply info. Had to break my system down because the side that had the info on it was covered by the top of the tower.
Enhance Electronics
Model: ATX-1140F with Outlet
400 Watt Power Supply
+3.3v(28A), +5V(38A), +12V(18A), -12V(.8A), -5V(.5A), +5VSB(2A)
The 4 pin connector is plugged in. =) I did not overlook that.
As for trying it with fewer memory sticks, no I have not tried that but keep in mind that earlier today the previous mobo was in this machine and running with both CPUs and all 3 memory sticks (512, 512, 1024). All in the same memory slots as the original mobo. I pulled each one and inserted it in the new mobo before taking out the next one to be sure I put them back in the same slot.
I checked and double checked all the bios settings and they match. The only thing that has changed since this morning is the replacement mobo and that is the exact same model as the one I replaced. System works fine with 1 CPU but not with 2. What might cause that on this motherboard but not the original one?

I can't watch YouTube videos on my brand new MacBook Pro with Lion. It says I need to download Adobe Flash Player but that won't install. Help!

I can't watch YouTube videos on my brand new MacBook Pro with Lion. It says I need to download Adobe Flash Player but that won't install. Help!

The same thing happens to me, Safari asks me to update the Adobe FlasPlayer, I download, start the installation process, ask me my username and password in order to install, then see a window where I choose if I want to always install the updates , or ask first, or not inslate updates, and at this point it is not progress, I can not cancel the process, I turn off and turn on my machine.
What can I do ..??
Regards.

HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop

HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop until you shut off. It resumes printing when you turn the 1022nw back on
Have renistalled Driver
It worked fine with Vista and XP

Hello @Astronav,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the issue of multiple pages continuously printing from your Windows 7 computer to your HP LaserJet 1022nw Printer. However, in order for me to provide you with accurate support I do need to know how your printer is connected to your Windows 7 computer.
Normally the continuous printing issues are caused by your router. When you send the print command to your printer from your computer than the print command goes from your computer to your router and finally to the printer. If there is a conflict with your router it may constantly send the signal to the printer to 'print' a job. Or, if the printed text is garbled information and weird symbols that your printer is printing it could be commands from the router to your computer that are improperly being sent to your printer and resulting in a page of weird symbols printing.
Therefore, it is very important for me to know how your printer is connected to your computer as that will guide us in the what direction we need to be troubleshooting.
Once I find out how your printer is connected to your computer I will be able to provide you with step-by-step instructions on how to resolve this continuous print issue. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Why won't adobe flash player run on my computer, even though it tlles me it has installed correctly

Why won't adobe flash player run on my computer, even though it tlles me it has installed correctly?
Regards, bricky3

Thought for Today: “It may be that our prime purpose in life is simply to be kind to others.” – Source unknown.
Hi Pat,
Thank you for your advice – I had not tuned in to the “public forum” implications.
Much appreciated.
Best Regards,
Ray Bricknell
<mailto:[email protected]> [email protected]

My computer, running on Lion, randomly flashes with crazy lights and colors. Doesn't happen often, but when it does it's totally random. What causes this problem and how can I solve it?

My MacBook Pro, running on Lion, randomly flashes with crazy lights and colors. Doesn't happen often, but when it does it's totally random. It looks like the Northern LIghts!!!
What causes this problem and how can I solve it?

Really? Oh I get it. You're the kind of person who goes on tech message boards to make jokes - or friends.
Well, I'm trying to solve this problem - which is a rather annoying way to spend a Saturday.
SO either help or don't reply.

I downloaded the new firefox and now I get an error stating it won't run with my version of Mac OS? What is the fix?

I was prompted to upgrade to Firefox 4 - I have a 3.6 version. When I move it to my application folder and tried to run it, I get the error that it cannot run with my version of Mac OS. I'm not sure how to update my OS version or go back to an older version of Firefox.

Firefox 4 requires at least OS X 10.5. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Won't run with 2 CPUs

I just replaced my 6501 motherboard with one that MSI sent me. When I install both processors the computer most times hangs at startup screen. Lights 2 and 3 are red which indicates it stops at the Bios sign-on.
It hangs where it says AMD MP 2800 Processor but before memory test and it does not display the , (2 cpu's) to the far right of the processor (80% of the time this happens on boot-up). Occasionally when I reboot it will detect both CPUs and will initialize the bios and then start loading windows at which point it immediately reboots.
If I remove the second CPU and reboot the machine boots fine and I can load up windows.
I have swapped both CPUs and put both of them in the Primary CPU slot and they both boot up and run fine no issues. Only when I try to have both in do I have problems. The reason I replaced the MB was because of some dried out capacitors. I got the 1.91 bios update already. Not sure what might be causing this but I want both CPUs working like before. Any help would be appreciated.
This is the first time this board has been used. I pulled it out of the box this morning. It is a refurbished board from MSI. The other board with the dried out capacitors ran both CPUs fine without issue but I had data transfer issues so had to replace it. The newest bios available for this motherboard appears to be award bios v1.91 which is the one I have.
If any further info is needed let me know what else you need. (I am on the computer having troubles right now but with only 1 CPU running - works fine albeit a bit slower)

Okay. Power supply info. Had to break my system down because the side that had the info on it was covered by the top of the tower.
Enhance Electronics
Model: ATX-1140F with Outlet
400 Watt Power Supply
+3.3v(28A), +5V(38A), +12V(18A), -12V(.8A), -5V(.5A), +5VSB(2A)
The 4 pin connector is plugged in. =) I did not overlook that.
As for trying it with fewer memory sticks, no I have not tried that but keep in mind that earlier today the previous mobo was in this machine and running with both CPUs and all 3 memory sticks (512, 512, 1024). All in the same memory slots as the original mobo. I pulled each one and inserted it in the new mobo before taking out the next one to be sure I put them back in the same slot.
I checked and double checked all the bios settings and they match. The only thing that has changed since this morning is the replacement mobo and that is the exact same model as the one I replaced. System works fine with 1 CPU but not with 2. What might cause that on this motherboard but not the original one?

Camera File Generator Won't Run with MAX + PCIe-1433

Hi,
I am a camera developer and am trying to integrate a couple of new cameralink cameras with the PCIe-1433 NI frame grabber. I have installed NI MAX 14.0 and version 3.0.0 of the Camera File Generator.
I am trying to build a new Camera File for our companies cameras.
The NI MAX shows the NI PCIe-1433 device when it launches.
When I try to launch the Camera File Generator, it failis to load with the following message:
"You must have NI-IMAQ 4.6.0 or higher installed before running the NI Camera File Generator. NI-IMAQ 4.6.0 is installed with Vision Acquisition Software 2011."
The MAX configuration tree shows I have version 14.0 of the NI-IMAQ software available.
Is there any sort of developer's guide for creating a camera file to allow me to use my camera? I need to write some serial commands to the unit and thought tha tthe Camera File Generator would support this....
Thanks.
-Mike

Hi mawillia,
The latest version of the IMAQ drivers is version 4.9, and it would show up where you said, under the Software tab in NI MAX. Do you have this latest version installed? If you like, feel free to expand out your software tab and take a picture of it and post it here.
Also, you are correct that the serial commands can be set in the camera file. Here is a link to our support page for the Camera File Generator: http://sine.ni.com/psp/app/doc/p/id/psp-723/lang/en
Within it is a whole host of various KnowledgeBase articles. This one seems particularly helpful:
What framegrabber specifications do I need to know to create my camera file?: http://digital.ni.com/public.nsf/allkb/9B89C9FA43A6973A86257A62004658D5
Unfortunately, I couldn't find any articles specific to coding the serial commands for your camera in the camera file. But I recommend opening up one of the bundled camera files (I'm looking at the Basler acA2000-340kc (Base).icd ) and within that, click the Camera Control tab. The serial commands for each attribute will show up on the right side, and you can use this as an example for creating yours.
Let me know if you have any further questions!
Julian R.
Applications Engineer
National Instruments

WinProducer2 start error, won't run with nVidia Capture drivers

I'm not having a good experience with the bundled WinProducer2 that came with my MX440VT8x-128.
If I have either of the versions of the nVidia capture-drivers that came on the card's CD (that's v. 1.16 or 1.18) installed, or the 1.22 version from nVidia's website (as of 2-20-03), and then try to start WinProducer, I get the same start-error every time:
"WinProducer.exe has generated errors and will be closed by Windows....need to restart program...an error log is being generated."
If I look at the Dr. Watson log, it says WinProducer 2 generated "Exception Violation c00005."
If I uninstall the nVidia capture-drivers, WinProducer2 opens right up just fine, but, of course, with no capture capability.
I downloaded and tried (after uninstalling v.2) WinProducer3 from InterVideo's website yesterday (2/20/03), with the exact same results! ???
Anybody else having this problem?
This is under Win2k, w/SP2, then added SP3, with no improvement.
Stenn

After I made the original post, I tried a lot more things that didn't help:
I booted in safe mode and tried it but PSP gave an error message that it wouldn't run with the screen resolution that low (800x600); so it did try to run. So I booted normally and set the screen rez to 800x600 manually, then tried to run PSP and got the same error message.
I did a clean boot with all start-up programs and all services disabled; PSP still wouldn't run.
I disabled my anti-virus and PSP still wouldn't run.
Disabled my video card in the device manager and booted with my on-board video; PSP still wouldn't run.
There's never an error message as long as the screen rez is high enough; when I try to run it, it looks like it's starting to run but nothing ever happens.

Cityville won't run with laterst FF/Flash combo & Flash 10.3 won't install

Similar Messages

Maybe you are looking for