Civs-4500e sporadically getting in a slow response mode

Hi.
I have an interesting situation with all of my 4500e cams. They used to work pretty well during the VSOM 6.3 time, but since we have 7.5.1, they begin to drop the stream and are very slow in response, when you try to access them via web.
After a reboot of the cam everything works fine for a while.
Since all other cams from other series are working good in the same subnet, I cannot imagine a network issue at first sight. Different settings like bitrates do not help. Firmware is a latest level (3.2).
Anybody had a similar issue?
Regards
Danny

I recently just lit a 4500E on that FW at a VSM 7.5.1 site. After being away a few days, I came back to check on it and noticed that a SASD wall setup which displayed *only* a single 4CIF feed from this one camera on a relatively small overall setup was indicating 'Excessive Frame Delay'.
We had other work to do at the site and this SASD workstation (and camera, actually) ended up being rebooted in the process, so I hadn't the opportunity to fully investigate what may have happened. I'll keep an eye out now that you've mentioned it and I'll probe their native Web UI if I happen to come across it again.
Cheers!

Similar Messages

Bex input help (F4) very slow response times

When running queries on some of our InfoCubes or ODSs (in 3.5 of 2004s) we are getting a very slow response when using the Input Help (F4) option. We have looked at the article the Nov/Dec 2004 BW Expert and the following SAP Notes 626887, 661251, 626887, 817335, 567746, 581802 and 748623. None of these are of much help. We did not seem to have this problem before the upgrade to 2004s.
Anyone have any other ideas? The users are wanting it fixed.

F4 help behaviour has changed in 04s 3.5 web run time.
See attached thread for a solution (not very helpful in some cases.).
/thread/263372 [original link is broken]

Slow response from search

When I type in the search bar, I get a very slow response--the letters appear sluggishly, one by one, with about a one second delay between each. I have about 6000 songs and they are all on an internal drive.
I created a new user account and dragged all my songs into iTunes in that account. Searching was lightning fast.
So it sounds like the problem is isolated to my account. I want to know if there is a way to speed up the search. The easy solution is to rebuild the xml file by deleting the songs from my library and re-importing them, but I do not want to lose my play counts, last played dates, etc. If there is a program that can save all that information for me, that would also be acceptable.
Any tips would be appreciated. Thanks!
--Tim
iMac G4 Mac OS X (10.4.6)

A few questions:
-Is the application running on the same server as the database?
-Single DB or RAC?
-When last was the database analyzed?(SQL Stats)
-Was there database admin scheduled jobs running(exports,RMAN ect.)
-When last did you rebuild indexes? (do we need to rebuild indexes)

Slow response from DB

Hi ,
My database is 10.02.0.4.0 on Solaris 5.9.
We are using Oracle 10g AS as Application server to
host the Application. Whenever the end user trying to access the
application who got the very solw response. At the application level
we have configured enough settings on datasource and connection pool parameters.
At Oracle Level 150 session, Processes 300 has set.
what could be the reason for End user getting problem like "Slow response","Connection Tiemd out".
Any parameter need to change. When I getting this error, what is the appraoch i need to follow to mitigate these kind of error in future .
Thanks,
Tippu

I have a performance checklist at :
Re: Multiple Sessions Performance Issue …………
Hth
Girish Sharma

Nokia N70 getting slower response

I have trouble with my nokia n70 music edition. After loading songs into my phone, it started to have slower response especially when I'm opening the Gallery. It took about 16 seconds before I opened my Gallery. My songs are on my memory card and if I remove it, it only takes about 10 seconds before I opened the Gallery. How can I get faster response on my phone when opening programs like the gallery? Please I need help

Where do you really store your music. I mean which folder on the memory card. Do you just copy your music files to the folder of your choice or you use the default My Music folder. I suggest you to transfer all your music files through the Nokia PC Suite's Transfer music option. This way you won't slow down your Gallery. Try this and give your feedback.
Rohinton Contractor

Random users getting very slow response when opening messages/attachments or sending email

I have a small number of users, mostly very senior management of course, who are experiencing slow response when trying to open email messages and attachments or send messages.
They see the spinning wheel and sit there until it decides to open or send. If the message is opened and closed again you would expect it to be quick reopening the same message, no, it does the same thing again.
These users are all using Outlook 2010 and their mail accounts are on Exchange 2013. It does not seem to make a difference if they use a physical machine or log into a VDI.
I do not have the same issue generally, though I have experienced this when using VDI and this has been seen using a number of different machine pools so it is not a specific pool.
This is not specifically a VDI issue, as the 3rd paragraph says, the issues are seen on both physical and virtual machines.
none of the mailboxes are particularly large, most are at around 60% of quota limit, and the same limit applies to almost all mailboxes across the organization. They also do not appear to have a huge number of messages stored, other users without issues
have larger mailboxes and higher item counts. Any ideas what I need to look at to address this?

Hi,
How about OWA?
If OWA works well, it seems an issue on the Outlook client side.
Please try to run Outlook under safe mode and re-create profile for testing.
Any related error/warning/information message left in App Log?
Also consider the network Bandwidth.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Parameter based on decode/function field - slow response

Hi,
When one of the parameters of a report is used, the report takes a very long time to run. The parameter has a LOV of statuses in Hebrew.
The folder is a custom folder and the status in Hebrew is a decode field using a function. In other words, it first goes to a function to get the status, and then translates each status (I guess that the Hebrew will be strange but I hope that the general form of the decode is clear):
DECODE( APPS.JAFI_DISCO_UTILS_PKG.JAFI_GET_INVOICE_STATUS(
AI.INVOICE_ID,
AI.INVOICE_AMOUNT,
AI.PAYMENT_STATUS_FLAG,
AI.INVOICE_TYPE_LOOKUP_CODE),
'APPROVED','מאומת',
'NEVER APPROVED','מעולם לא עבר אימות',
'NEEDS REAPPROVAL','דורש אימות מחדש',
'CANCELLED','מבוטל',
'AVAILABLE','זמין',
'UNAPPROVED','לא מאומת',
'SELECTED FOR PAYMENT','נבחר לתשלום',
'FULL','מיוחס במלואו',
'UNPAID','לא שולם',' ')
I am assuming that the reason for the slow response is the constant run of the function in addition to the decode (which I was once told also slows the response a bit).
Is there anyway to change the sql somewhat? Without using the parameter the report takes about 2 1/2 minutes to run. Using the parameter it takes around 25 minutes to run.
Thank you.
Leah
Edited by: user476771 on May 10, 2010 2:09 AM

Hi Michael,
I think your suggestion #3, checking the indexes, is an excellent start.
As to the other suggestions, I believe that everything passed to the function is needed to find the status.
We seem to have serious problems running materialized views. Our dba is actually checking it out now. One group of mv were changed a few months ago so that they are no longer needed (someone worked around it using other tables for the data). Another mv is problematic even though it takes 14 minutes to create in a tst environment (which I happen to do yesterday) and causes no problems afterwards, it is a problem when run in prod as part of a job. As I mentioned, our dba is checking it out.
I hesitate to create a new table that is updated every night with the status of each invoice. It won't be up-to-date during the day, and it means changing the report that has otherwise run smoothly until now. The user avoids using the one parameter as much as possible so it's not THAT bad...
I really appreciate your giving the four suggestions.
Thank you so much.
Leah

Slow response using internet, just hangs

Not the best at IT and just clicked update when it came up as available without realising what I was doing! Turns out it was an upgrade to os x 10.9.4. Since then the laptop has been practically unusable particularily when it comes to safari, it is either really slow getting to a particular page or just doesnt do anything, no matter how long you wait. Restarting doesnt seem to help, reload view fails as well. Its strange as sometimes its ok for 10 minutes then starts doing this. I know this is bad but I have never backed the laptop up so cant restore to previous version. I am currently looking into which external hard drive to buy so I can start doing regular back ups. I have run EtreCheck in the hope somebody can help!! Results below
Problem description:
Very slow responses on internet, just hangs for ages
EtreCheck version: 2.0.6 (91)
Report generated 25 October 2014 13:18:22 BST
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.4 (13E28) - Uptime: 0:42:39
Disk Information: ℹ️
ST9500325ASG disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (392.13 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) Support
/Users/[redacted]/Downloads/PeerGuardian.app
[not loaded] xxx.qnation.PeerGuardian (1.1.11 - SDK 10.2) Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] xxx.qnation.PeerGuardian.locum.plist Support
User Launch Agents: ℹ️
[running] com.amazon.cloud-player.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
pploader Application (/Users/[redacted]/Downloads/PeerGuardian.app/Contents/Library/LoginItems/pploa der.app)
pplogger Application (/Users/[redacted]/Downloads/PeerGuardian.app/Contents/Library/LoginItems/pplog ger.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 15.0.0.189 - SDK 10.6 Cannot contact Adobe
LogMeIn: Version: 1.0.730 Support
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.730 Support
LogMeInSafari64: Version: 1.0.730 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      6% WindowServer
      1% fontd
      0% AppleSpell
      0% Safari
      0% imagent
Top Processes by Memory: ℹ️
159 MB Safari
103 MB pploader
73 MB com.apple.WebKit.WebContent
47 MB WindowServer
34 MB mds_stores
Virtual Memory Information: ℹ️
1.53 GB Free RAM
1.14 GB Active RAM
655 MB Inactive RAM
971 MB Wired RAM
624 MB Page-ins
0 B Page-outs

Not the best at IT and just clicked update when it came up as available without realising what I was doing! Turns out it was an upgrade to os x 10.9.4. Since then the laptop has been practically unusable particularily when it comes to safari, it is either really slow getting to a particular page or just doesnt do anything, no matter how long you wait. Restarting doesnt seem to help, reload view fails as well. Its strange as sometimes its ok for 10 minutes then starts doing this. I know this is bad but I have never backed the laptop up so cant restore to previous version. I am currently looking into which external hard drive to buy so I can start doing regular back ups. I have run EtreCheck in the hope somebody can help!! Results below
Problem description:
Very slow responses on internet, just hangs for ages
EtreCheck version: 2.0.6 (91)
Report generated 25 October 2014 13:18:22 BST
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.4 (13E28) - Uptime: 0:42:39
Disk Information: ℹ️
ST9500325ASG disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (392.13 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) Support
/Users/[redacted]/Downloads/PeerGuardian.app
[not loaded] xxx.qnation.PeerGuardian (1.1.11 - SDK 10.2) Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] xxx.qnation.PeerGuardian.locum.plist Support
User Launch Agents: ℹ️
[running] com.amazon.cloud-player.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
pploader Application (/Users/[redacted]/Downloads/PeerGuardian.app/Contents/Library/LoginItems/pploa der.app)
pplogger Application (/Users/[redacted]/Downloads/PeerGuardian.app/Contents/Library/LoginItems/pplog ger.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 15.0.0.189 - SDK 10.6 Cannot contact Adobe
LogMeIn: Version: 1.0.730 Support
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.730 Support
LogMeInSafari64: Version: 1.0.730 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      6% WindowServer
      1% fontd
      0% AppleSpell
      0% Safari
      0% imagent
Top Processes by Memory: ℹ️
159 MB Safari
103 MB pploader
73 MB com.apple.WebKit.WebContent
47 MB WindowServer
34 MB mds_stores
Virtual Memory Information: ℹ️
1.53 GB Free RAM
1.14 GB Active RAM
655 MB Inactive RAM
971 MB Wired RAM
624 MB Page-ins
0 B Page-outs

Very slow response when I click on a link, but almost instant response if I go back and click a second time.

I often get very slow response when I click on a link, any link. But if I go back and click on the link again, then the page will open almost immediately. I discovered this by accident and noticed that this happens every time. It would be nice if I got fast response on the first click without having to do this silly procedure and it seems to me that there's a simple fix. I would appreciate it if you could help. I'm open to any and all ideas. Thanks again.
Sincerely,
Al
Version 26.0 Firefox, Windows XP, sp/3

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Program Monitor - slow response

In the effect controls I can scale, rotate etc by entering values or pulling sliders.
However I am suffering from a very slow response doing scaling, rotating and translating in the program monitor- while Motion has been highlighted in the effect controls.
Also I have noticed there is a yellow box with handles in the program monitor. I remember it was white before.
I like to scale in Program Monitor since it works more interactively.
I cannot figure out what to change in my preferences.
Best,
Hans Wessels
Premiere CC
Mac Pro OSX 10.7.5
16 GB 1066 MHz DD3
2 X NVIDIA GeForce GT 120 512 MB

Yes that is correct. The white bounding box is now yellow. I think is looks better.
I see you have two graphic cards. Disable one of the.
Might want to get a more powerfull one.

APEX hosted site slow response issues

Hi,
Is anyone else experiencing slow response issues when navigating through the hosted (apex.oracle.com) APEX site. About a 2-3 weeks ago we started noticing that it takes a long time to log into the site as well as navigate through anything
This might sound odd but often times how we would workaround it is by repeatedly "re-clicking" a link or a button to get the page to return. Whenever the site is slow in respnding we wound see "Waiting for apex.oracle.com" in the browser's bottom console.
We see the same issue with IE or Firefox and its only the apex.oracle.com site that has this problem.

As I posted on another thread:
Sorry for the lack of a reply here. With the long holiday in the U.S. and then my past two days of this week, spending at least a half a day each on apex.oracle.com, I haven't been paying attention to the discussion forums. I was unaware of this active thread.
Don't worry Ben, I'm not going to say "It's fine for me". TKyte had identified a bug or two in Ask Tom over the weekend, and I tried to fix them on Monday morning. What should have taken me 10 minutes took me two hours.
This has been my top priority for the past two days. There are some networking issues still being researched. A configuration change was made earlier today which seems to have alleviated the issue, but I'm not convinced that it will be a permanent fix.
Understand that this has not been a database issue nor an Application Express issue. Every time the performance was glacial, both yesterday and today, I examined the database and there was hardly anything going on. It was a hardware (filer) issue a month ago, and it appears to be either firewall or network card or network issue or all three. Regardless, I am embarrassed for Oracle's sake - this should be our flagship for Oracle Application Express, and the past month or two of poor performance can only serve to dissuade from using Oracle and Oracle Application Express.
Joel

Zend AMF Slow Response

I am getting slow response times when using Zend AMF in Flash Builder 4. It is taking between 1.5s to 2s to return the results, which is much slower than when I am returning XML. However its about the same no matter if no records are returned or if 1000 records are returned. It seems like it is taking a while to make the connection to the gateway.php file. Anyone else noticing issues like this? All the examples I have seen online use Apache instead of IIS, could that be part of my problem?
Thanks,
Justin

I experienced the same with Zend and switched to coldfuion as a result. Its better matched
to Flex, and you can go as far as Life Cycle Data services with it if you want. It is also a superior
design to php but works pretty much the same way.
The communications with Flashbuilder have several gotchas which are not explained but are covered here now.
The old php 4 AmfPhp was really impressive performer on speed. But it just took a dive when it went
to zend and 5.
Dan Pride

MBP - Slow Response - Rainbow Wheel constantly

Problem description:
MBP - very slow response and rainbow wheel shows up every time i do an action. this started happening after upgrade to Yosemite, on thing i noticed is: after the upgrade there is a progress bar that come after i enter the login details. i did disk verify and it all seems ok. safe boot also same rainbow wheel problem
EtreCheck version: 2.0.6 (91)
Report generated 22 October 2014 17:52:24 BST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1680 x 1050
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:6:26
Disk Information: ℹ️
Hitachi HTS725050A9A362 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Prithi (disk1) / [Startup]: 498.88 GB (387.14 GB free)
Encrypted AES-XTS UnlockedConverting
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 15
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Roxio
[not loaded] com.roxio.TDIXController (1.7) Support
/System/Library/Extensions
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.9) Support
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.9) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.4) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.4) Support
[not loaded] com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) Support
[not loaded] com.novatelwireless.driver.3G (3.0.9) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (2.0.6) Support
[not loaded] com.option.driver.Option72 (2.15.0) Support
[not loaded] com.option.driver.OptionHS (3.26.0) Support
[not loaded] com.option.driver.OptionMSD (1.21.0) Support
[not loaded] com.option.driver.OptionQC (1.11.0) Support
[not loaded] com.vodafone.driver (3.0.9) Support
[not loaded] com.zte.driver.cdc_ecm_qmi (1.0.0d1) Support
[not loaded] com.zte.driver.cdc_usb_bus (1.0.0d1) Support
[not loaded] de.novamedia.driver.NMLGEDriver (3.2.10) Support
[not loaded] de.novamedia.driver.NMSamsung (0.0.2) Support
[not loaded] de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
[not loaded] de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
/System/Library/Extensions/NMHuaweiPhonesVTPCDC_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
/System/Library/Extensions/NMSamsungDriver_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (3.0.9) Support
/System/Library/Extensions/Vodafone.kext/Contents/PlugIns
[not loaded] com.vodafone.driver.Data (3.0.9) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.CS5ServiceManager.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] de.novamedia.VodafoneDeviceObserver.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
User Login Items: ℹ️
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Google Drive Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.4.2.18903 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 10.1.7 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.7 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User Internet Plug-ins: ℹ️
PSPlugin: Version: (null) Support
WebEx64: Version: 1.0 - SDK 10.6 Support
Safari Extensions: ℹ️
iTube Studio
GoPhoto.it V9.0
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Growl Support
Java Support
MusicManager Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      6% WindowServer
      0% Google Drive
      0% AppleSpell
      0% opendirectoryd
Top Processes by Memory: ℹ️
112 MB Safari
103 MB Finder
86 MB Google Drive
77 MB Dock
77 MB Spotlight
Virtual Memory Information: ℹ️
69 MB Free RAM
1.57 GB Active RAM
1.50 GB Inactive RAM
1.12 GB Wired RAM
1.10 GB Page-ins
696 KB Page-outs

I'm having the exact same problem. Since installing Yosemite, my iMac (late-2013 model with 32GB of RAM) is constantly hanging ... the spinning beach ball pops up constantly. It pops up when I open files, it pops up when I open windows, it pops up when I close apps, it pops up when I open apps, etc., etc., etc. I've tried everything and can't get it to stop. And to make matters worse, I'm having the exact same problem on my 2010 iMac. It's driving me nuts.

Sound issues; slow response; usb ports unreliable and sd reader not working

The PC is a HP TouchSmart envy about 18 months old. Soon after purchasing I upgraded to Win 8.1.
About three or four months -ago probably after a Win update was installed- I began to have Sound issues (including not able to conect my external powered speakers any more- they used to work brilliantly and initially no sound at all but I went into settings and changed something and every now and again I have to do that again to get the PC speakers to work) ; slow response; usb ports unreliable, sd reader not working- as well as issues with the internet - the modem actually. It is easier to get on to a tablet and use the internet as my PC can be really slow. As well I have uninstalled Chrome and am using Explorer as this seems a little better but I miss Chrome.
I was advised by tech at Hervey Norman that I had to do a complete system restore but in order to do that I would need the recovery discs from HP? Is that correct? How do I do this?
PS I did not make recovery discs when I first purchased the machine. (Very sad!!!)
Help!!!
Alfriston

Hi again Alfriston,
Thank you for the clarification!
To return your computer's audio back to functional order, I recommend removing the audio driver from the operating system previous to upgrading to Windows 8.1, and installing the driver provided in this link.
If re-installing the driver does not resolve the issue, I suggest following the steps in this document on No Sound from the Speakers (Windows 8).
In regards to the USB ports, I recommend following this resource on Troubleshooting USB Connections (Windows 8), which should help consistently connect your USB devices to your computer.
To prevent your computer from lagging or responding in a slow manner, please follow the step in this document on Resolving Slow System Performance (Windows 8) to help improve the speed and efficiency of the operating system.
To further diagnose the issue with your desktop's SD card reader, I recommend following this resource on Using and Troubleshooting Memory Card Readers (Windows 8).
If your desktop still experiences issues with the audio, USB connections, speed and performance, as well as the SD card reader, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Troubleshooting slow response to email via vpn

I've just adopted a vpn 3000 concentrator, and am totally learing this, so my apologies.
What could be reasons within a VPN enviroment that people are having slow response to email. (excluding issues with servers)
From a network perspective I can trouble shoot slow response, but how would a vpn enviroment be any more different to troubleshoot.
Naturally VPN is going to be much much slower, but taking 10 minutes for multiple users to get their email seems odd. LAN users get there email within seconds

Hi:
I'll tell you, I used to have the exact same problem at my last company.
We had an Exchange server for email and everyone used Cisco's VPN client.
Email was so slow, it was ridiculous sometimes. Everything else was OK, though. Other applications were OK, and network management was also good. It was just Exchange.
I know that Exchange is notorious for being delay intolerant, but this was bad! and it seemed to get worse with time.
Anyway, I dont know if you have done any troubleshooting yet or not, but you would definitely want to focus on the MTU settings for the VPN connection. Remember that IPSec adds overhead that may cause the ethernet frame to exceed the network's allowable MTU, so the packets get fragmented and reassembled at the receiving end. This can be a very slow process. And some applications are not very tolerant of fragmentation, like SQL and, I think, Exchange, too.
The problem with client VPN is that you would have to adjust each user's PC MTU. With site-to-site VPN, you can, of course, set the maximum segment size of the entire tunnel, so all users sitting behind the tunnel will be forced to conform to the tunnel's stips.
But you can try doing that on a few PCs to see if anything changes. I changed the PCs MTU using freeware called DR. TCP/IP. You can download it for free and it will allow you to change the PCs MTU very easily -- just a few keystrokes, instead of having to go into the registry and get stupid with Windows.
Change the output segment size for the PC to, say, 1400, and see if that improves anything. You would also want to change it on the 3000. I forgot how to do it on the 3000.
Victor

Civs-4500e sporadically getting in a slow response mode

Similar Messages

Maybe you are looking for