CIVS-IPC-2500W not responding
I have a CIVS-IPC-2500W that is not allowing me to open the admin page. I can ping it and it is ever giving off CDP to my switch but I can't access it. Whenever I go to the camera's IP from a web browser I get "404 - Not Found".
Hi Scott,
Yes, I used scp to copy the file over from the functional camera. It was fairly straightforward to resolve once I suspected the file was corrupted.
Cheers!
Similar Messages
-
Problem viewing video on CIVS-IPC-3520
We just purchase a few CIVS-IPC-3520, indoor HD cameras, and can not see the video on the web interface to adjust the cameras.
I first tried with a Windows 7, IE8 laptop, and it will not load the needed activeX files to view the camera. I then tried a very old laptop with Windows XP and IE8 and it did work. I have even upgraded the firmware to the latest (V1.4.1-97), which will not work with our current version of VSOM, 6.3.3, and it still does not allow us to view the video.
Does anyone know of any tricks to get these cameras to show video on the web interface to adjust the camers at installation? I just dont think that I should have to use 10 year old tech to install something that is brand new.
Any help would be greatly appreciated.
Thanks
DougOkay, so I had the same problem when we receivied the 3520's on campus in December. I was able to download the program from the camera utility folder and install the program successfully when running it from the desktop. I was then able to view video on a camera I was staging in my office. Fast forward to Friday when I was actually installing the cameras and now I cannot view video again from the PCs that I was previously viewing video. When bringing up the camera video feed, I get a message that says the Camera UI is not installed. However, I can open the programs list and see that it is still installed. Tried uninstalling it, rebooting and re-installing without success. The install program starts gathering information and then it goes off into la la land. Running this on Win 7 Enteprise Edition and IE 9 and IE 10.
-
CIVS-IPC-2930 Web Interface Inaccessible
We have a Cisco CIVS-IPC-2930 PTZ camera and the web interface is inaccessible. Navigating to the page returns an error "500 - Internal Server Error". Our VSM is still able to pull the feed from the camera, and I can access it via SSH, just not through the web interface. Looking at the error log for lighttpd shows the following errors repeatedly:
2014-04-07 16:38:51: (mod_fastcgi.c.2481) unexpected end-of-file (perhaps the fastcgi process died): pid: 1464 socket: unix:/tmp/php.socket-1
2014-04-07 16:38:51: (mod_fastcgi.c.3299) response not received, request sent: 1333 on socket: unix:/tmp/php.socket-1 for /index.php , closing connection
Have tried restarting the lighttpd processes and reloading the camera, but the issue persists.
Anyone seen similar issues? Ideas to resolve?
ThanksHi Scott,
Yes, I used scp to copy the file over from the functional camera. It was fairly straightforward to resolve once I suspected the file was corrupted.
Cheers! -
Hi
I am having two cisco camera ,one is CIVS-IPC-3530 and CIVS-IPC-6030,
I have given them ip static ip address and the page is accessed .
The problem is i cannot view live video from internet explorer 11.Though it is working in mozilla using quick time player.but without controls.
i want to view from Internet explorer.i have tried to IE 9 also,with all setting of compatibility and enable mode protected.
when i open a camera page and click on view video i get this message.
Viewer
Following are the various options available to view live streaming from IP camera:
Cisco Camera UI Control (ActiveX): Preferred method for viewing live streaming on Microsoft Internet Explorer.
To install the Cisco Camera UI Control, you must have Administration rights on this computer and you must allow installation when asked.
Run Microsoft Internet Explorer as Administrator. To do that right click on Internet Explorer icon and select Run as administrator.
Click on the yellow banner to begin the installation. If the banner is not visible, turn off pop-up blockers from the Tools menu in Microsoft Internet Explorer.
For all browsers (Chrome / Firefox / Safari) other than Microsoft Internet Explorer, use below options :
QuickTime: For use with H.264.
VLC: For use with H.264 / MJPEG.
If you are still having problem installing ActiveX, please click on the following link to download the .cab file. After downloading the .cab file, unzip it, to extract the installer .msi file. You can install the ActiveX by executing the .msi file CameraUIControlV2.cab
I have tried this downloading of .msi file n extracting and running it but nothing happens.
after few more try i got this error message
failed to setup Directshow filter Graph error:80040273.....................
can any be kind and help me out.Hi StephanMC,
We haven't had much trouble with the Cisco cameras in the past, and we've actually been pretty pleased with the indoor versions of their newer models (we've got several dozen 6020 and 3520 cameras installed). This seems to be an issue specifically related to cold weather operation. As a note, if you are installing all of those 3530's inside, in a heated area, you could probably just go with the 3520 cameras with the vandal resistant conduit base and dome. It's pretty much the same camera, but not intended for outdoor use, and would cost a fair bit less.
Cheers! -
Loginwindow (Not Responding) after iTunes & Quicktime update
In order to activate my new iPhone this morning I needed to upgrade to iTunes 7.5 and the corresponding Quicktime update. After a reboot and logging in I was presented with the desktop, the dock and a spinning beachball . . . which still hadn't gone away after 10 minutes.
After a while I tried a few things and noticed that the dock was working, until I ctrl clicked on the finder icon that is. After that the dock froze and I rebooted with a long power button press. After logging again I had the same problem, desktop, working dock and spinning beachball.
This time I hit one of my dock stacks and launched the Activity Monitor, only to discover that a process called 'loginwindow' was Not Responding. On force quitting this everything went away and I was back to the login prompt. I logged in again and found the same thing - I can use all the applications I can get to through the dock but have no finder . . .
Any ideas?? HELP!!OK, here's /var/log/system.log from boot. Are the following two lines significant??
Nov 10 21:40:43 Macintosh com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[119]): Exited: Terminated
Nov 10 21:40:43 Macintosh com.apple.launchctl.Aqua[131]: launchctl: Couldn't stat("/etc/machinit_peruser.d"): No such file or directory
Nov 10 21:39:57 localhost kernel[0]: Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
Nov 10 21:39:47 localhost com.apple.launchctl.System[2]: /dev/disk0s3 on / (hfs, local, journaled)
Nov 10 21:39:49 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Nov 10 21:39:49 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Nov 10 21:39:49 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Nov 10 21:39:54 localhost fseventsd[31]: event logs in /.fseventsd out of sync with volume. destroying old logs. (19369 21 20061)
Nov 10 21:39:58 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 10 21:39:54 localhost fseventsd[31]: log dir: /.fseventsd getting new uuid: C00E1A09-A514-48BA-A79D-C46786E0EE9E
Nov 10 21:39:58 localhost kernel[0]: vmpagebootstrap: 380993 free pages and 12223 wired pages
Nov 10 21:39:58 localhost kernel[0]: migtable_maxdispl = 79
Nov 10 21:39:58 localhost kernel[0]: 105 prelinked modules
Nov 10 21:39:58 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Nov 10 21:39:58 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Nov 10 21:39:58 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 10 21:39:58 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Nov 10 21:39:58 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Nov 10 21:39:58 localhost kernel[0]: calling mpopolicyinit for mb
Nov 10 21:39:58 localhost kernel[0]: Seatbelt MACF policy initialized
Nov 10 21:39:58 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Nov 10 21:39:58 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 10 21:39:58 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 10 21:39:58 localhost kernel[0]: MAC Framework successfully initialized
Nov 10 21:39:58 localhost kernel[0]: using 7864 buffer headers and 4096 cluster IO buffer headers
Nov 10 21:39:58 localhost kernel[0]: IOPCCard info: Intel PCIC probe: TI 1510 rev 00
Nov 10 21:39:58 localhost kernel[0]: FireWire (OHCI) Apple ID 31 built-in now active, GUID 001124fffe75e670; max speed s800.
Nov 10 21:39:58 localhost kernel[0]: mbinit: done
Nov 10 21:39:58 localhost kernel[0]: Security auditing service present
Nov 10 21:39:58 localhost kernel[0]: BSM auditing present
Nov 10 21:39:58 localhost kernel[0]: rooting via boot-uuid from /chosen: BAD0DFF0-4023-381B-8C51-E904679A62CC
Nov 10 21:39:58 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 10 21:39:58 localhost kernel[0]: Got boot device = IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiATA/ATADev iceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/ST91008 23A ST9100823A/IOApplePartitionScheme/Untitled@3
Nov 10 21:39:58 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Nov 10 21:39:58 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 6728192 to: 4701696 (joffset 0x8601000)
Nov 10 21:39:58 localhost kernel[0]: CSRHIDTransitionDriver::start []
Nov 10 21:39:58 localhost kernel[0]: CSRHIDTransitionDriver::switchToHCIMode legacy
Nov 10 21:39:58 localhost kernel[0]: USBF: 22.539 CSRHIDTransitionDriver[0x2a10f00](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
Nov 10 21:39:58 localhost kernel[0]: CSRHIDTransitionDriver... done
Nov 10 21:39:58 localhost kernel[0]: E:[AppleUSBBluetoothHCIController][FindInterfaces] mInt0InterruptMaxPacketSize = 16
Nov 10 21:39:58 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Nov 10 21:39:58 localhost kernel[0]: HFS: Removed 5 orphaned unlinked files or directories
Nov 10 21:39:58 localhost kernel[0]: Jettisoning kernel linker.
Nov 10 21:39:58 localhost rpc.statd[22]: statd.notify - no notifications needed
Nov 10 21:39:59 localhost bootlog[39]: BOOT_TIME: 1194730773 0
Nov 10 21:40:00 localhost kernel[0]: Resetting IOCatalogue.
Nov 10 21:40:00 localhost kextd[12]: 0 cached, 423 uncached personalities to catalog
Nov 10 21:40:08 localhost DirectoryService[35]: Launched version 5.0 (v514)
Nov 10 21:40:08 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[27]: Login Window Application Started
Nov 10 21:40:08 localhost DirectoryService[35]: WARNING - dsTouch: file was asked to be opened </Library/Preferences/DirectoryService/.DSIsRunning>: (File exists)
Nov 10 21:40:09 localhost kernel[0]: UniNEnet: Ethernet address 00:11:24:75:e6:70
Nov 10 21:40:09 localhost blued[50]: Apple Bluetooth daemon started.
Nov 10 21:40:11 localhost /usr/sbin/ocspd[55]: starting
Nov 10 21:40:11 localhost ifcstart[29]: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: Sat Nov 10 21:40:11 localhost ifcstart[29] <Warning>: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
Nov 10 21:40:11 localhost ifcstart[29]: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only.
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: Sat Nov 10 21:40:11 localhost ifcstart[29] <Error>: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only.
Nov 10 21:40:11 localhost ifcstart[29]: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: Sat Nov 10 21:40:11 localhost ifcstart[29] <Error>: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned
Nov 10 21:40:11 localhost /usr/libexec/ifcstart[29]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Nov 10 21:40:12 localhost mDNSResponder mDNSResponder-161.1 (Oct 11 2007 00:22:27)[26]: starting
Nov 10 21:40:13 localhost mDNSResponder[26]: Adding registration domain jodrell.members.mac.com.
Nov 10 21:40:20 localhost kernel[0]: Matching service count = 0
Nov 10 21:40:21: --- last message repeated 5 times ---
Nov 10 21:40:21 localhost kernel[0]: wl0: Broadcom BCM4320 802.11 Wireless Controller
Nov 10 21:40:21 localhost kernel[0]: 4.170.25.8.2
Nov 10 21:40:21 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:11:24:8e:52:78
Nov 10 21:40:21 Macintosh configd[37]: setting hostname to "Macintosh.local"
Nov 10 21:40:22 Macintosh configd[37]: ipconfigd: method requires address and mask
Nov 10 21:40:26 Macintosh kernel[0]: SetCryptoKey T: len 16, idx 0
Nov 10 21:40:26 Macintosh configd[37]: AppleTalk startup
Nov 10 21:40:26 Macintosh kernel[0]: SetCryptoKey R: len 16, idx 1
Nov 10 21:40:27 Macintosh SystemStarter[19]: "/System/Library/StartupItems/NMPCCardOption3gDaemonVF" failed security check: world writable
Nov 10 21:40:27 Macintosh SystemStarter[19]: "/System/Library/StartupItems/NMPCCardOption3gDaemonVF" failed security check: group writable
Nov 10 21:40:27 Macintosh SystemStarter[19]: "/System/Library/StartupItems/NMPCCardOption3gDaemonVF" failed security check: not owned by UID 0
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting MySQL database server
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting Cisco Systems VPN Driver
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Tuning TCP/IP stack for 2.5G/3G performance
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: kern.ipc.maxsockbuf: 8388608 -> 1048576
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting NMPCCardDaemonVMC
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting NMPPPMonitor
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: net.inet.tcp.slowlink_wsize: 8192 -> 65535
Nov 10 21:40:27 Macintosh com.apple.launchd[1] (0x10c1b0.nohup[102]): Could not setup Mach task special port 9: (os/kern) no access
Nov 10 21:40:27 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Version 2.1.6 will start in 30 seconds.
Nov 10 21:40:27 Macintosh com.apple.launchd[1] (0x10c1b0.nohup[104]): Could not setup Mach task special port 9: (os/kern) no access
Nov 10 21:40:27 Macintosh com.apple.launchd[1] (0x10c1b0.nohup[112]): Could not setup Mach task special port 9: (os/kern) no access
Nov 10 21:40:28 Macintosh com.apple.SystemStarter[19]: kextload: extension /System/Library/Extensions/CiscoVPN.kext is already loaded
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : attempting to attach to all available ethernet interfaces.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : interface: en1, filter attached.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : en1
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : current MTU for en1 is 1500, saving it.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : interface: en0, filter attached.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : en0
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : current MTU for en0 is 1500, saving it.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : loading cisco ipsec kernel module.
Nov 10 21:40:32 Macintosh configd[37]: AppleTalk startup complete
Nov 10 21:40:33 Macintosh loginwindow[27]: Login Window Started Security Agent
Nov 10 21:40:36 Macintosh kextd[12]: writing kernel link data to /var/run/mach.sym
Nov 10 21:40:42 Macintosh authorizationhost[124]: MechanismInvoke 0x130e00 retainCount 2
Nov 10 21:40:42 Macintosh SecurityAgent[125]: MechanismInvoke 0x103e40 retainCount 1
Nov 10 21:40:42 Macintosh SecurityAgent[125]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Nov 10 21:40:43 Macintosh SecurityAgent[125]: MechanismDestroy 0x103e40 retainCount 1
Nov 10 21:40:43 Macintosh loginwindow[27]: Login Window - Returned from Security Agent
Nov 10 21:40:43 Macintosh authorizationhost[124]: MechanismDestroy 0x130e00 retainCount 2
Nov 10 21:40:43 Macintosh loginwindow[27]: USER_PROCESS: 27 console
Nov 10 21:40:43 Macintosh com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[119]): Exited: Terminated
Nov 10 21:40:43 Macintosh com.apple.launchctl.Aqua[131]: launchctl: Couldn't stat("/etc/machinit_peruser.d"): No such file or directory
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Starts...
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'VMC3G pccard'...
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'Fusion Lite Quad pccard'...
Nov 10 21:40:58 Macintosh Dock[139]: _DESCRegisterDockExtraClient failed 268435459
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'Novatel Merlin U740 pccard'...
Nov 10 21:41:00: --- last message repeated 1 time ---
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'Huawei DATA PCCard'...
Nov 10 21:41:10 Macintosh Dock[139]: [QL ERROR] Generator database update takes too long... we will use what we currently have
Nov 10 21:41:58 Macintosh mdworker[147]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Nov 10 21:42:00 Macintosh mdworker[149]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary. -
Turn off information text after CIVS-IPC-2935 restart
After CIVS-IPC-2935 is restarted, on picture I see information about model, version, configure done, and sw1 and sw2. How I may disconnect this?
May be problem in not configured sw1 and sw2 ?I finally figured it out. Just in case anyone else has the bad luck to do what I did, here's what it was:
I'm not quite sure what caused Universal Access to come up by mistake the first time (weirdness #4 in the previous post), but at any rate it seems that while clicking some setting or another in Speech, and perhaps clicking too slowly, the click was intercepted by Universal Access instead. All the features I mentioned were settings in Universal Access. So by going into Universal Access intentionally, I was able to restore all the settings back to normal -- all except #4, anyway, which, if it happens again, at least I'll know what to watch out for. -
Direct login into a CIVS-IPC-2500: username & password required
Hi,
I'm integrating a couple of CIVS-IPC-2500 in a domotics project.
So far, I've setup the cams, I'm able to see a picture with a browser and http://<ip>/img/video.mjpeg.
I'm unable to get the picture in the domotics supervisor. I realize now that when I use the http://<ip>/img/video.mjpeg syntax on a new PC, I get a pop-up asking for username & password. On my "work" PC, this syntax works because I've already done a logon, so username & password are cached.
Is it possible to login directly into the cam without supplying any username & password ?
I've reset the cam to factory defaults and done the setup again, trying blank password, but it's not allowed
Any hint ?
ThanksHi,
Thanks for the quick reply.
Indeed, security isn't a concern, so I thought about the trick to embed the username & password.
The problem: the domotic supervisor doesn't allow me to do that.
I'm stuck -
In the past couple months, I have had 15 of 149 CIVS-IPC-IPC-3530 cameras fail. I've also had numerous cameras (some of which required replacing) become unreachable, requiring me to replace the camera configuration through the VSOM interface.
I am running v7.5.0 (not co-located), with 5 Media Servers. The camera firmware version is 1.4.1-97.
The installation is in Northern New Jersey. It is cold, but well within specifications (-22F - 122F).
Has anyone experienced similar issues?Hi StephanMC,
We haven't had much trouble with the Cisco cameras in the past, and we've actually been pretty pleased with the indoor versions of their newer models (we've got several dozen 6020 and 3520 cameras installed). This seems to be an issue specifically related to cold weather operation. As a note, if you are installing all of those 3530's inside, in a heated area, you could probably just go with the 3520 cameras with the vandal resistant conduit base and dome. It's pretty much the same camera, but not intended for outdoor use, and would cost a fair bit less.
Cheers! -
Firefox will not open. I get the firefox is already running but not responding window... I have tried rebooting with no help. I have tried to end the process via cntrl+shift+esc and nothing firefox is listed to end. I have tried find the app data via the run icon in the start up window, I have no run icon on this system (Acer with windows vista(?)
== This happened ==
Every time Firefox opened
== The computer was hard shut down and did a improper shut down scan when it was restarted ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)I am having a similar problem. Running Xp.
Latest revision of firefox.
After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there. -
Those are all the details I have
There is an article about this problem see:
* [[Firefox is already running but is not responding]] -
Greetings NI folks,
I'm an oceanographer, and have an sidescan sonar data aquasition computer running Windows XP SP2, and NiDAQ 7.0 (Legacy). For several years, this machine has worked flawlessly, but today, I booted it up to test the system for an upcoming job, and I got some strange errors in our sonar program. I tranced the problem to our NI-6533 PCI-DIO-32HS card. I launched NI Automation Explorer to test that the card was responsive, and when I click the "test panel", I get an error: "The device is not responding to the first IRQ level." Continue (yes/no). If I click yes, I can test the digital i/o's, but nothing happens, and all the tests fail (nonresponsive). I tried moving the card to another PCI slot, tried forcing it to have a specific IRQ that was unused by anything else, and finally tried moving it to another computer that had never been used with the DIO card. I'm still getting the error, and the card is nonresponsive. I'm at the limit of my abilities, and would like to know if there's anything else I can do, or should we send the card back to NI for repair/diagnosis.
Thanks.Duplicate Post
Best Regards
Hani R.
Applications Engineer
National Instruments -
My iPod is not being recognized by iTunes. iPod seems disabled and not responding to anything. Permanently on "do not disconnect". Not sure what to do.
Hello,
My iPod is not being recognized by iTunes or internet
explorer. It used to, but not anymore. It just
dosent show up when I connect it to my computer.
Also, the "do no disconnect" sign does not appear on
my iPod when I connect it. It is still able to
recharge, though.
have u tried a different usb port?
I read that I have to restore it. I have tons of
songs in my iPod that I do NOT want erased! How can
I back these songs up? I have some songs on my iPod
that are from another person's computer, so if they
get erased, the songs are gone forever.
try this http://www.copypod.net/
Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right" -
I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?
I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.
-
"Update server not responding" when trying to update Acrobat 9 Pro
I just installed Acrobat 9 Pro on my desktop computer and on my laptop. I was able to download and install the latest updates to the copy on my desktop computer (so that it is now version 9.3.0), using Help>Check for Updates.
When I try the same command on my laptop, I get and error message that states "The update server is not responding, which means it may be offline at the moment, or the Internet or firlewall settings may be incorrect. Please try again later." I tried several times yesterday and today with the same error. The message pops up immediatley; it doesn't even seem to actually try to connect.
I disabled my firewall and antivirus software and still get the same result. I uninstalled then reinstalled Acrobat and still get the same result.
I looked online at Adobe.com to see about downloading and installing the updates manually, but it's difficult for me to tell which updates I need. Some are for other languages and some are for 64-bit but I have Windows 7 32-bit.
A call to tech support was no help. The agent seemed to think because I installed verison 9.0 that I only needed the one English update listed on the download page under 9.0, and not any of the later updates. . . And he said that Adobe recommends manually installing updates from Adobe.com rather than using the Check for Updates command (?!).
Anyway, does anyone know what might be causing this problem with the adobe updater? Maybe I need to reinstall the updater (where do I find it?).
OR
Can someone tell me which of the updates listed on the Acrobat dowload page I should manually install to bring my product up to date?
[Running Windows 7 32-bit on both machines]
Thanks.Hi,
Which version of Acrobat do you have ?
(Launch Acrobat and Go to Acrobat->About Adobe Acrobat menu item and check the version )
Also, can you ping following urls ?
armmf.adobe.com
armdl.adobe.com
ardownload.adobe.com
Are these urls reachable ?
Also, you can check the contents of host file /etc/defaults/host to see that none of the ips are redirected.
One more thing that you could try:
If you have firewall on, could you please disable the firewall and then try the update. Does it works now ? -
Adobe Reader 11 w/Windows 7 not responding
Why does Adobe Reader 11 fail to respond sometimes? Re-installing allows it to function several times then we get a "not responding" message. A plank screen is displayed and the number of pages but NO text! Using repair produces the same results. Upon 1st use of the repaired/reinstalled reader 11 we also get the adobe message "Cannot find or create the font "Times New Roman". Some characters may ot display or print correctly". The text is mostly displayed at this point. The second attempt to display the same PDF or another displays completely w/out any error message at all. At some point during the testing process Adobe Reader 11 stops working! Restarts don't help. Shutdowns don't help. Seems only a re-install or repair allows us to correctly view our PDF document a number of times before we have to repeat the process. Is help available?
Moved the discussion from Adobe Reader Touch for Windows 8 to Adobe Reader.
Maybe you are looking for
-
I was told that the MPP is unsupported, but I know for a fact that I have converted MPP to PDF. My question is what is needed to make this happen?
-
Tree Component within Accordion Component
Hello all! I've done a navigation scheme that uses both the accordion and tree components. The data being gathered is from an XML file. The only problem i'm having is getting the tree components to display the data that they're being provided with. I
-
Hi, I have worked in Webservices using JWSDP2.0. and never worked using AXIS 2.0. Would like to know the major differences or advantages over one another and which is best to use and easy in creating the webservices. Thanks, Narendra
-
I suggest you stop changing the layout or give us ...
Hello Skype. Your new layout is annoying and sucks so bad. I am refraining from cussing but I am very mad at you guys. Stop changing the layout the heck does that even ACHIEVE besides making people that have been here for long periods of time ANGRY.
-
Problem while "migrating" from Windows to Mac OS X
Over the last few months my Macbook was damaged and in repair. At that time I used a Windows PC instead and it was no problem to keep on using my old iTunes library file after I added the file extension ".itl". Now my Macbook is back and I wanted to