CJ02 - Error when closing Message - CJ 824

Hi,
I am trying to close the project via CJ02, however when i change the status to IM40(Closed to Actual Cost) i am greeted with following error, The AUC is already settled, Don't know what's happing here, Can anyone  please advise
Error when processing asset under construction (AuC) for WBS element xxx-xxxx-xxx-xx
Message no. CJ 824
Thanks

The problem was the cost center entered in CJ02 was not in validity period. I have extended the validity period. Issue resolved

Similar Messages

  • Error when closing Workbench

    We're getting an error when closing workbench -- below is information from the log:
    !MESSAGE Bundle update@plugins/org.eclipse.emf.compare.diff_0.8.0.v200806180301.jar was not resolved.
    !MESSAGE Missing required bundle org.eclipse.emf.compare.match_0.0.0.
    Does anyone know why we would be getting this error?
    Thanks,
    Janis

    Could I know which version of Workbench you are using? Was it installed as a
    standalone or an Eclipse plugin? Any other plugins you have installed?
    Regards,
    Long Liu
    2011/3/26 Janis Wolf-Pittel <[email protected]>
    >
    We're getting an error when closing workbench -- below is information from
    the log:
    >
    !MESSAGE Bundle update@plugins/org.eclipse.emf.compare.diff_0.8.0.v200806180301.jar
    was not resolved.
    !MESSAGE Missing required bundle org.eclipse.emf.compare.match_0.0.0.
    >
    Does anyone know why we would be getting this error?
    >
    Thanks,
    Janis
    >

  • Error when closing down (NetworkUXBroker.exe)

    I get this error when closing down Win 10. Just to let you know...
    NetworkUXBroker.exe
    The instruction at 0x00007FFDA03BB070 referenced memory at 0x000000CA1AD04F0

    Error message when closing down computer
    Ainslie Collison - 09:03pm Sep 12, 2008 Pacific
    Adobe photoshop downloader boot will not shut down automatically when I close down the computer. What settings can I change. I cannot find anything to help in edit/preferences. I have the starter edition.

  • Error when closing Service Call

    Error message is occuring when trying to close / update a service call.
    'No related record found [Service Calls - Contact Person] [Message 60156-18]
    and
    'Removing activites from service call not allowed'
    Some history to the BP which may be linked
    1 business partner was created
    2 service messages and activities where created
    3.  Bp was accidently deleted
    4.  BP was reinstated
    5.  Old service messages have error when closing
    Any solutions on how to update the service call - so it can be closed?

    Hello Lisa,
    I have came across this issue before. I suggest that a messaged be logged with the SAP Support Team. They may need to get a copy of the database to verify this.
    Regards,
    Lorna Real

  • "Not an executable or is a link" errors when starting Messaging Server

    "Not an executable or is a link" errors when starting Messaging Server
    <P>
    If Calendar Server 3.x has been installed to the same server root
    as Messaging server, it is possible that the command 'NscpMail start'
    to restart the server will return a string of errors:
    # /etc/NscpMail start
    19971207145610:Dispatch:Notification:Local Module
    (Account-Handler) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Account-Manager) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (AutoReply-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Configuration-Manager) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Error-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Mailbox-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Program-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Router) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (UNIX-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (Finger-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (IMAP4-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (POP3-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (SMTP-Accept) is not an executable or is a link.
    Module not loaded.
    Startup Problem:
    Module Error-Handler is required for proper operation.
    Netscape Messaging Server Exiting!
    The Calendar server 3.x installation may have changed the permissions
    on [server-root]/bin directory from 755 to 750. Simply issue the
    command (as root) 'chmod 755 [server-root]/bin' and then start
    the server with the 'NscpMail start' command, and it should start
    without a problem.

    "Not an executable or is a link" errors when starting Messaging Server
    <P>
    If Calendar Server 3.x has been installed to the same server root
    as Messaging server, it is possible that the command 'NscpMail start'
    to restart the server will return a string of errors:
    # /etc/NscpMail start
    19971207145610:Dispatch:Notification:Local Module
    (Account-Handler) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Account-Manager) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (AutoReply-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Configuration-Manager) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Error-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Mailbox-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Program-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Router) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (UNIX-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (Finger-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (IMAP4-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (POP3-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (SMTP-Accept) is not an executable or is a link.
    Module not loaded.
    Startup Problem:
    Module Error-Handler is required for proper operation.
    Netscape Messaging Server Exiting!
    The Calendar server 3.x installation may have changed the permissions
    on [server-root]/bin directory from 755 to 750. Simply issue the
    command (as root) 'chmod 755 [server-root]/bin' and then start
    the server with the 'NscpMail start' command, and it should start
    without a problem.

  • Error when sending message: 500 Internal Server Error

    Hi
    IE is not accepting any messages,
    when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
    following things what i have noticed.
    1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the  IE admin) URL is  "http://<host>:8000/sap/xi/engine?type=entry"
    2. SICF all the XI serivess are up and running, i am able to test these service.
    3. The http port is active ( SMICM )
    Pls note the error is  500 Internal Server Error  
    regards
    Nisar

    I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
    This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
    1 Check Table Space is enough. ---i had installed server recently & very few interface running.
    2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
    3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
    Try restart the java stack(XI Server) and follwing services.
    com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
    com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
    basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
    regards
    Nisar

  • Error when sending message: 404 not found

    Hi,
    New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
    In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
    "Error when sending message : 404 not found"
    Also tried in Adapter Engine and the result same.
    Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
    Any idea's?? what might be the issue????
    Thanks,
    Venu.

    Hi Venu,
    "404 is a not found error", plz make a check of  your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
    Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
    http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
    Select XI Adapter Framework.
    Thirteen associations have to be registered.
    (Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
    If you can't find all the associations, then you will have to create the associations manually.
    This is a very good blog which answers ur question:
    check this weblog
    https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
    Regards,
    Vinod.

  • Error when sending message: 500 Timeout

    while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
    can any1 throw some light on this.

    Hi venu,
    you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
    there are two ways you can change it:
    1. check out note: 824554
    TCODE - rz10
    icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
    (for 800 seconds)
    8010 is my HTTP port so you have to change it:)
    2. SXMB_ADM -> configure integration server -> change specific identifiers
    runtime parameter:
    Parameter HTTP_TIMEOUT
    Meaning
    Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
    Personally I only changed the one from the instance profile but the second one should work too
    My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
    If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
    Let me know what u have done , if it works
    Thanks,
    srini

  • Test message from RWB: Error when sending message: 401 Unauthorized

    Hi Experts,
    While I am sending test message from RWB, I am getting following error:
    Error when sending message: 401 Unauthorized
    I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
    I am having SAP_ALL authorizations and few days back everything was fine.
    I think something wrong with configuration in XI but I am unable to pin point.
    Please help.
    Regards,
    Gourav

    Yes,
    but
    Role of Business System : Integration system
    Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
    How can I change it to Application system
    and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
    Regards,
    Gourav

  • RWB:Error when sending message: 404 Not Found

    Dear all,
    "i am getting error:      Error when sending message: 404 Not Found"
    while testing from rwb > Component Monitoring   > Non-Central Adapter Engines >  Adapter Engine AIPID > test message >
    with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
    sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
    and my id comm channel > target host > bid.xxx.com with service no
    (adapter type: xi
    adapter engine: Integration server
    address type: url address
    target host: bid
    service no: 8000
    path: /sap/xi/engine?type=entry
    i am working in nw2004s system)
    while testing cache connectivity test from rwb > Component Monitoring 
    i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
    green: Integration Repository
    green: Integration Directory
    green: Integration Server - JAVA
    red:Adapter Engine af.axd.aipid
    yello:Integration Server - ABAP
    Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
    [Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
    [Data Evaluation]: GlobalError
    though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
    what should i do?
    best regards,
    dushyant.
    refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
    and
    SXI_CACHE
    @8O@ Error during last attempt to refresh cache
    LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
    Smq2 = 0
    Sm58 = 0

    Hi,
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Cheers
    Manish

  • Error when sending message: Method not implemented

    Hi, All:
    We have newly setup system and when we test sending test message from RWB, (RWB-Component Monitoring-Integration Engine-Test Tab), we got following error:
    "Error when sending message: Method not implemented", I know this is related to post configuration issue, I just know someone has come cross the situation and how it was resolved.
    Thanks
    Liang

    HI Liang
    Yes it looks like post installation problem. I have not come across this but i think you should check with the RFC created for IE while installation. To connect IE & AE and even the exchange profile if something is missing
    Thanks
    Gaurav

  • Error when sending message(e-mail) from Process Chain ?

    Hello SDN s,
    How ya all ?
    I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
    The following is the Job Log Entries....
    30.06.2006 18:05:53 Job started                                                                          00        516         S    
    30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE)     00        550         S    
    30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out                                RSM        794         I    
    30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent          SO        654         S    
    30.06.2006 18:06:00 Error when sending message                                                        RSRA2        11         S    
    30.06.2006 18:06:01 Job finished                                                                        00        517         S    
    Thanks !!!
    Best Regards....
    Sankar Kumar
    +91 98403 47141

    Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
                                                                         Duration   Duration 
                             Completed  Error      In transit Waiting    In transit Waiting  
                                                                             hh:mm      hh:mm                                                                               
    B08(100)                        0          0          0          0                                                                               
    FAX Telefax              0          0          0          0       0:00       0:00
         5  INT Internet             0          0          0          0       0:00       0:00                                                                               
    SMTP              0          0          0                  0:00       0:00                                                                               
    X40 X.400                0          0          0          0       0:00       0:00
            RML R/Mail or            0          0          0          0       0:00       0:00
            PAG                      0          0          0          0       0:00       0:00
            PRT                      0          0          0          0       0:00       0:00
    So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
    could u give the steps to do that ? as i am the only one BW guy here !?
    Thanks !!!
    Best Regards....
    Sankar

  • Error when sending message: 403 Forbidden....sender si file

    hi...
    here iam working with File to IDoc scenario
    file is picking from a particular source but its is not showing any messages in SXMB_MONI and in IDX5 (outbound) or in RWB.
    when i check test my message in RWB its is showing Error when sending message: 403 Forbidden.
    can anyone explain me this problem plz...
    all my DESIGN and CONFIGURATION is fine....
    its urgent...
    THX..
    john wesly

    Hi John
    403 Forbidden
    The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.
    for more details on error code follow the link
    http://www.web-cache.com/Writings/http-status-codes.html
    http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
    http://www.helpwithpcs.com/courses/html/html_http_status_codes.htm
    first try to solve problem by making CACHE refresh
    either by directory
    Check whether you have given the right credentials. If you are very sure that you have given right credentials then your problem will be solved by restarting J2EE engine
    steps to restart J2EE engine
    1) run transaction SMICM
    2) then in the tab administration => J2EE instance(local) =>send soft shutdown with restart
    by this java engine will restart and will be up in 5-10 minutes and your problem will be solved
    Thanks
    sandeep sharma
    PS ; if helpful kindly reward points

  • Error when closing a process order

    Hi
    I am getting an error when trying to close a process order.
    The error is - KW407"No prices could be determined for object Activity type XXXX/XXXX/SET". I have checke the following:
    1. KP26 the price has been maintained.
    2. Have checked that the cost element assigned for the actuvuty is "43"
    3. The Valuation variant is maintained correctly.
    Please let me know what could be wrong and how the order can be closed.
    Karthik

    Hi Karthik,
    Error message class KW relate to ABC costing. Did you use template and OH group and assigned in Materil master or in the costing sheet. if so
    Have you correctly assigned the template to OH group KTPF?
    If this is not the case, please check your MRP settings in the material master.
    Hope you need to change the planning strategy? please check with PP guys.
    Thanks
    Velumani

  • Error when closing: In file 'TeamAdminTempDelete': delTempFile is not defined

    Hello all,
    I have CS4 on my pc at work and at the moment I have to set up some html sites for this schuhe website
    When closing Dreamweaver I always get the following error message:
    JavaScript Error: In file 'TeamAdminTempDelete': delTempFile is not defined
    I´m getting this error for a few days. Many weeks before I it worked without this error.
    What can be the problem?
    Thanks.
    Solatt
    I forgot to say some details to my CS4 version: Here I have Dreamweaver 10.0 build 4117

    Found the fix from another User... You need to delete the temp file that Dreamweaver creates.
    I have Windows 7 and this is my path to the file. You can do a search and find it as well.
    C:\Users\Jim\AppData\Roaming\Adobe\Dreamweaver CS4\en_US\Configuration\WinFileCache-3012BA81.dat
    Delete - WinFileCache-3012BA81.dat

Maybe you are looking for

  • Picture will not display

    Sometimes when I edited a photo in elements 10, it will not display in Organizer.  It shows a blank fractured image.  Not sure why! Any suggestions! tim

  • Soap Sender Channel Config

    While configurting Soap Sender channel, what should we use for "Deafult XI Parameters" section values for 'Default Interface Namespace' and 'Default Interface Name' ? Thanks

  • Multi Jtable row selection

    I am trying to allow a multi Jtable selection : In a JPanel, boxlayout, I have many Jtables aligned with the Y AXIS (one below the other). They have the same model and what I want is to be able, when I drag an area with the mouse, to select all the r

  • Can't create webpage or use iWeb

    When I open iWeb, many of the options are greyed out, such as New Page, New Site etc. (actually the only option that's available under the File menu is close). How do I get iWeb to work again?

  • Trigger a BSOD on Hyper-V Virtual Machine using CrashonCtrlScroll

    Hi All, I need to trigger a Memory Check on a VM running under Hyper-V 2012 R1. Using "http://msdn.microsoft.com/en-us/library/ff545499.aspx" as a guide a I have tried using the standard Right CTRL + Scroll Lock + Scroll Lock as well as alternate key