Cj20n all levels of WBS wrt PR by relate NETWORK , ACTIVITY No

Dear SDN Team,
1. Is there any PS table to find out WBS Element levels for individual Purchase Requisition?
2.In our orz all PR is maintained by Network activity No. in EBKN table, where i have already got details of Network for respective PR. But how can i get WBS Elements of all levels for particular PR with this Network?? Also i want to know Table for activity No for individual PR?
rgds
sp
kolkata

Hi ,
Use this BBP_WBS_GETLIST

Similar Messages

Customer validation on all levels of WBS

Dear All,
I have done validation on 1st level of WBS that customer field is must to fill in or it gives error message.
How do i do this for all levels of WBS?
Regards,
Smile

In prerequisiste of validation at WBS level maintain the logic such as
PROJ-PROFL = 'XYZ'' AND PRPS-STUFE >= '2' i.e you are doing a prerequisite for project profile XYZ and WBS level > 2. This validation will be applicable for all conditions matching.
If you just want level then maintain PRPS-STUFE >= '1' , so that validation will be carried out for all levels of WBS greater then 1.
Thnaks
Sarang

Status of WBS element triggering confirmation of network activity ?

Hello,
Can you please let me know if the following requirement could be solved using workflow in PS module :
Setting of 'Fully invoiced' status (FNBL) on WBS element in CN02 transaction should trigger the confirmation of network activity (transaction CN25).
How this possibly could be done using workflow ?
Regards, Wieslaw

Hi,
   its possible to raise a workflow on Setting of 'Fully invoiced' status (FNBL) on WBS element in CN02 transaction .
BOR: bus2054
Do status managemnet to raise a evnt of this BOR ( BSVW ).
In the work flow in one of the method of extended BOR,
    do the confirmation of network activity thru some bapis,etc.
For confirmation:
   BOR: PSAFRU method:    NetworkConfirmation.Create
   check if this is helpfu
create an instance of this nd check if this method helps.

CJB1/CJB2 will Create Settlement Rule only on Last level of WBS

In Investment projects the client want to settle last level WBS to top level WBS and from top level WBS to AUC and capitalise it. Since we have so many WBS in structure hence we want to use CJB1/CJB2 for settlement rule creation. But CJB1 and CJB2 is createing WBS on all level of WBS. Can any body tell me, what configuration/settings i need to do so that CJB1/CJB2 will create Settlement Rule only on Last level of WBS.
Edited by: Vipul Mehta on Aug 28, 2011 3:19 PM

Hi Sreekant,
I checked in SPRO; PS > Costs > Automatic & Periodic Allocations > Settlement > Sett Rule for WBS > BADI for CJB1 / CJB2, there is so many BADI is available. Please let me know BADI name, which is help me to create settlement rule create at WBS last level through CJB1 / CJB2.
Regards
Vipul Mehta

Report to check Standard WBS link to which standard network and activity

Dear All,
Is there any way or standard report to check standard WBS (cj93) link to standard network/activity (CN03).
Normally we create project by using template existing, we would like to check the structure. Is there any way to check the standard template for it ( WBS template link to network/activity template).
Thank you.
Nies

Hi,
Please try this:
1. Tcode : CN41
2. Change database profile: In that in the origin check mark the Standard structure. Continue..
3. At the bottom of the selection screen check mark the standard structures.
4. In the selction area for the Project hit F4 and select the project based on the standard WBS Element.
5. Exceute the report.
Hope this is useful.
Reward points if found useful.
thanks..

How to make mandatory(usr01) field for level 1 wbs elements only from CJ20N

Dear All,
I have made mandatory for "PRPS-USR01" field from CJ20N transaction
by using field exit. But mandatory field (usr01) is working for all wbs elements. I want to make this usr01 field mandatory for LEVEL 1(prps-stufe), WBS ELEMENTS(prps-posid) only. Not for level 2 and level 3 wbs elements. Please let me know how to fix it.
urgent.
Regards,
Karthik.

You could envisage the use of validation rules in PS.
Transaction OPSI or SPRO
Create a validation with a message ID (Z)
Create a step
- prerequisite : PRPS-STUFE = '001'
- Check : PRPS-USR01 <> ' '
affect a message number
Regards.

Budget at all level WBS element

Dear All
In my project secrino i had created 4 level WBS elements i.e under 2ed level 3 rd level and under 3rd level 4th level i had created. when i am going for budget the system is taking only 4 th level WBS element total to all the Level of wbs.Please guide me to how to solve this issue. i want to have level by level budget.
Regards
Raj

Hi Raj,
Amol is right, you don´t need total up the budget. But keep in mind If you have level 1 and level 2 for example and you want 1000 USD for level 1 and 5000 for level 2 it is needed budgeting 6000 for level 1 and 5000 for level 2 ( level 1 only have available 1000 USD)
Regards,
Sara

Substitution - Pass all postings from level 1 WBS to lower WBS

Dear All,
I have defined project type X.
For this particular project type, i want to pass on all the postings from 1st level WBS element to following level WBS elements.
I think this is possible with Substitution. Can you please guide me how do i do this?
Thanks
Regards,
Smile

Hi Sarang, Hi Abhishek,
Thanks for reply!
I am sorry that i was not very clear with the question.
In my organisation, projects are defined like this, 1st level WBS is billing element and all revenues are posted to this WBS.
There are further levels 2,3 to each projects and i would like to distribute the revnues per WBS.
Example: project A is defined as - level1 WBS
Level 2 - each of the depts working on the project.
The man hours are booked per dept to level 2 WBS elements.
I would like to distribute the revenues also to each of the depts from level 1 WBS by using substitutions.
Is this possible? How?
Regards,
Smile

Issue in creation of level 2 WBS for level 1 WBS which is released

Hello All,
I am trying to create a level 2 WBS for a alrealy created level 1 WBS using BAPI_BUS2054_CHANGE_MULTI .If the level 1 WBS is not released then level 2 WBS gets created .However if the level 1 is released then level 2 WBS doesnt gets created and i get error ' User status INIT is active (WBS #1) '
Using T-code CJ20n i am able to create level 2 WBS for released level 1 WBS .

Hi;
Do you fill WBS_LEFT, WBS_UP fields for IT_WBS_ELEMENT / IT_UPDATE_WBS_ELEMENT tables.
Hierarchy is very important for between WBS.
May help below similar link:
Re: Create Whole Project with BAPI_PROJECT_MAINTAIN
Best regards.

Check on level of WBS element for capital purchase PO

Hi Experts,
We are facing a problem. While creating Capital purchase PO, all WBS elements are allowed. Although, system is configured in such a way that GRN can not be done for Level 1 WBS( Parent project). We want to introduce a check at PO creation level only, so that it should not take Level 1 WBS element. How can it be done( validation check can do here or not) .

How did you set up the derivation rule???
I think that is where you specify a level of expenditue or procurement.
Thanks

PS: How to get the hierarchy of a level 1 WBS only?

Hi,
This corresponds to Projects System module.
If we have 5 level 1 WBS elements.Out of them if I want to get only the WBS hierarchy corresponding to a level 1 WBS element (say 2nd level 1 WBS element).
I know that we can get all the WBS elements' hierarchy from BAPI_PROJECT_GETINFO. But I want the hierarchy for only one level 1 WBS element not for all. How?

you could read them from SETNODE table with SETCLASS = '0110'

Levels of WBS elements

Hi All,
I am new to PS.
Please explain me how to define the levels of WBS elements with examples...
Thanks
Sneha

Hi,
Levels of WBS r controlled by Project coding mask.WBS levels can be created Upto max 99 levels depends on the need of the project Project structuring is done ( generally upto 4-5 levels solves the purpose )
http://help.sap.com/saphelp_46c/helpdata/en/04/926eae46f311d189470000e829fbbd/frameset.htm
Go thru above link of SAP help.
Rgds

Budget at Level 5 WBS

Dear Experts
I have below 5 Levels of WBs elements
T-06425-01
T-06425-01-01
T-06425-02-01-01
T-06425-02-01-01-01
T-06425-02-01-01-01-01
If I want to allocate Budget directly at Level 5 WBS element in CJ30, system will automatically check Budget available at upper levels 4,3,2 and 1.
Once assigned in Levels 1,2,3,4 then only i can allocate the budget right?
No my quesion in standard do we have any option in directly giving budget at Level 5 only and save, If we do like this system will throw budget exceeded at upper levels of WBS.
Please Suggest.

Hi,
Pavan gupta wrote:
my quesion in standard do we have any option in directly giving budget at Level 5 only and save, If we do like this system will throw budget exceeded at upper levels of WBS.
Firstly I want to tell you that, When you enter budget at level 5 in CJ30 and total-up, then it will consider only to level 5 not for all other.
You are facing error because I think after entering budget, you are not performing total-up.
Procedure:
1)Goto CJ30->Enter Project Definition only not WBS->Press Enter
2)Now select your level 5 WBS->Enter Budget->Select Column ->Menubar->Edit->Total-Up
Now check & save. This budget will consider to level5 only.
Regards
Shishir

Can we load data for all levels in ASO?

Hi All,
Im creating cube in ASO
can i load data for all levels in ASO
we can load data for all Levels In BSO but in ASO i need confirmation????
and one more
wat is the consider all levels option in ASO is used for ? wat is the purpose?
Can any one help ,it would be appriciate.
Thanks

In an ASO cube you can only load to level zero
The consider all levels if used for aggregation hints. It allows you to tell the aggregation optimizer to look at all levels when deciding if aggregation needs to be done on the dimension

Can we load data for all levels in ASO cube

Hi All,
Can we load data for all levels of members in ASO cube in 9.3.1.
Regards

Yes you can load data for all levels in an ASO cube in any version HOWEVER, none of the upper level data in any cube will be there when you look for it. You will get a warning message in the load because ASO cubes don't store data at upper levels. It is the same as loading data into dynamic calc members in BSO cube. It will do the load without compalints, but there will be no data there (At least you get the warning in ASO)

Cj20n all levels of WBS wrt PR by relate NETWORK , ACTIVITY No

Similar Messages

Maybe you are looking for