CJ20N Network creation issue. Short Dump MESSAGE_X; CNPB 011
Hello,
I need your help please.
We have an issue on CJ20N.
We have a short dump MESSAGE_TYPE_X with error message "CNPB 011" in any way we create network on CJ20N (1/ By right click => Network or 2/ Right
click => Copy network or by 3/ drag and drop from templates)
It's noted that:
=> the problem not occurs when we create the network from CN21.
=> We didn't have this problem before.
To avoid the dump and be able access to project, we execute the program that described on note OSS 445323 "Z_DELETE_AFVC_MISSING_AFKO".
After analysis, it turns out that: Records are created on AFVC, AFVV, AFAB, AFVU, JEST, JSTO, etc. BUT NO NETWORK EXISTS IN AFKO for the AUFPL. SO, all is correctly created expect AFKO update.
Can you please help me to see clearly? We don't understand why we have this dump at network creation from CJ20N mainly we didn't have this problem
before.
Thank you in advance for your help,
Amal
Hi Amal,
I would suggest to do the following:
1. Are you getting this DUMP in all of your Clients DEV, Quality and Production?
2. Check if any transport has been moved to Production lately which might have disturbed some settings in PRD Environment if it is happening only in Production Environment.
3. If you are getting DUMP in all of the environments Please raise an OSS with SAP. As what you have described seems to be a Program Bug.
Hope it helps..
Cheers
Sammar
Similar Messages
-
SEM-BCS Short Dump while executing Manual Posting Task
Hi SEM-BCS Colleagues,
I am having a peculiar problem with relation to the settings for Manual Postings. I have three scenarios for which I have defined manual document types and tasks 1) Standardizing Entry (Data Collection) 2) Manual Document in IU for adjustment 3) COI Group level manual postings. I am just creating and not changing any settings for document field properties also. I have configured monthly consolidation frequency and period category and I am posting document type 1 in Local Currency and 2 and 3 in Group Currency since they are after currency translation.
Have any of you faced similar problem and help me please?Hello,
I am also getting short dump during data collection in BCS.
we recently upgraded the system to SP20. Is it anyway related to upgrade.
I also checked the MYSELF as a source system, but not found one.
Could you please let me know how you have solved this issue.
short dump:
Runtime Errors PERFORM_TOO_MANY_PARAMETERS
Exception CX_SY_DYN_CALL_PARAM_NOT_FOUND
Date and Time 04.12.2009 05:21:11
Short text
Too many parameters specified with PERFORM.
What happened?
In a subroutine call, there were more parameters than in the
routine definition.
Error in the ABAP Application Program
The current ABAP program "SAPLRSDRI" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was
not caught in
procedure "RSDRI_CUBE_WRITE_PACKAGE_RFC" "(FUNCTION)", nor was it propagated by
a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
A PERFORM was used to call the routine "CUBE_WRITE_PACKAGE" of the program
"GPD1S8520HM8UV0U2XBDVPADF03".
This routine contains 7 formal parameters, but the current call
contains 10 actual parameters. -
Short dump Error during VM container communication between ABAP and JAVA.
Hello All,
Can anybody please help with resolving the following issue:
Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
When I try to insert ECC migrated material, everything works fine.
Here is the details of dump:
Short text
Error during VM container communication between ABAP and JAVA
Information on where terminated
Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
Thank you!hi Willie,
this is the dump, and i have used the t-code sm52 . the VMC is not active.
|Short Text |
| Error during VM Container communication between ABAP and JAVA. |
|What happened? |
| The current program had to be terminated because of an |
| error when installing the R/3 System. |
| Error in the RFC layer. |
|What can you do? |
| Note which actions and entries caused the error to occur. |
| |
| Consult your SAP administrator. |
| |
| Using transaction ST22 for ABAP dump analysis, you can view, manage, |
| and retain termination messages for longer periods. |
|Error analysis |
| An error has occurred in the RFC layer during communication between |
| JAVA and the ABAP stack. This prevents data from being passed correctly |
| between the two stacks. |
| |
| Message = TH_VMC_SERV_NOT_ACTIVE |
| Return code = -1007 |
| Pointer = "000007DD348F6138" |
|How to correct the error |
| Check whether the VMC is active on your application server. To do this, |
| run transaction SM52. If the VMC is not active, contact your SAP |
| administrator. |
Regards
Charles -
Short dump while PO creation with Tax Code
we are facing problem while creation PO, while providing the Tax code(Example V0), its going for short dump, check the below
the program SAPLV61Z and
The exception must either be prevented, caught within the procedure
"SEL_KONDTAB"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Check the field names in the SELECT clause.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_INVALID_FIELDNAME" CX_SY_DYNAMIC_OSQL_SEMANTICSC
"SAPLV61Z" or "LV61ZU01"
"SEL_KONDTAB"
The termination occurred in the ABAP program "SAPLV61Z" in "SEL_KONDTAB".
The main program was "RM_MEPO_GUI ".
The termination occurred in line 537 of the source code of the (Include)
program "LV61ZU01"
of the source code of program "LV61ZU01" (when calling the editor 5370).
Processing was terminated because the exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
occurred in the
procedure "SEL_KONDTAB" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "SAPLV61Z ". Its source code starts in line 254
of the (Include) program "LV61ZU01 ".
005360 IF se_read_all_prestep IS INITIAL.
> SELECT * FROM (t681-kotab) APPENDING TABLE <cond_tab>
005380 UP TO 1 ROWS
005390 WHERE kappl = se_kappl
005400 AND kschl = se_kschl
005410 AND datbi >= se_date
005420 AND datab <= se_date
005430 AND (coding_tab).
005440 h_subrc = sy-subrc.
In the above statement execution its going for dump, when the (t681-kotab) value is A980 when i checked at debugging
Kindly help me out to solve the issue
Thanks in advance
Regards
KesavHi,
Do you have an integer field in the condition table A980? It looks like a field in the table is integer one and the system during creation of custom dynamic select statement adds as many spaces as possible before the integer value (integer values are right justified), so the statement exceeds the maximum length with an 'AND' or another condition clause.
Please check and provide more details if the issue is not resolved.
Regards,
Marcin -
Short dump-internal table size issue
Hi,
I get the following message in the short dump analysis for a report.
No storage space available for extending table "IT_920".
You attempted to extend an internal table, but the required space was not available.
Error Analysis:
The internal table "IT_920" could not be enlarged further.
To extend the internal table, 9696 bytes of storage space was
needed, but none was available. At this point, the table "IT_920" has
1008240 entries.
Its an old report and I saw the internal table declaration using the "OCCURS" clause in the internal table declaration.
begin of itab occurs 100.
end of itab.
I tried the option of changing to "OCCURS 0", still issue persists.
Any help would be highly appretiated
CMHello CMV,
This is basic problem with SAP internal tables. For every internal table memory is alocated ( Max..256K)...once you cross the memory size/limit of the internal table it resuls in short dump.
Only way to overcome this problem is handle limited number of records at a time..
Please refer following sample code which will help you to avoid short dump while processing large number of records....
SORT TAB_RESULT.
DESCRIBE TABLE TAB_RESULT LINES W_RECORDS.
W_LOW = 1.
W_UP = 1000.
*Spliting the records from tab_result1 by pakage of 1000 at a time
*to avoid short dump in case of more records
WHILE W_LOW <= W_RECORDS.
R_PKUNWE-SIGN = 'I'.
R_PKUNWE-OPTION = 'EQ'.
R_WERKS-SIGN = 'I'.
R_WERKS-OPTION = 'EQ'.
LOOP AT TAB_RESULT FROM W_LOW TO W_UP.
MOVE TAB_RESULT-PKUNWE TO R_PKUNWE-LOW.
MOVE TAB_RESULT-WERKS TO R_WERKS-LOW.
APPEND R_PKUNWE.
APPEND R_WERKS.
ENDLOOP.
*fetch sold to party
SELECT KUNNR NAME1
FROM KNA1
APPENDING CORRESPONDING FIELDS OF TABLE TAB_KNA1
WHERE KUNNR IN R_PKUNWE.
*fetch plant
SELECT WERKS NAME1
FROM T001W
APPENDING CORRESPONDING FIELDS OF TABLE TAB_T001W
WHERE WERKS IN R_WERKS.
REFRESH: R_PKUNWE,
R_WERKS.
W_LOW = W_LOW + 1000.
W_UP = W_UP + 1000.
ENDWHILE.
Hope this will help you to solve problem.
Cheers,
Nilesh -
Short dump due to performance issue
Hi all,
I am facing performance issue in my sandbox. Below is the content of short dump.
Short text
Unable to fulfil request for 805418 bytes of memory space.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
What can you do?
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Pls help me to resolve this issue
Regards,
Kalyani
Edited by: kalyani usa on Jan 9, 2008 9:04 PMHi Rob Burbank,
I am pasting the transaction I found in the dump
Transaction......... "SESSION_MANAGER "
Transactions ID..... "4783E5B027A73C1EE10000000A200A17"
Program............. "SAPMSYST"
Screen.............. "SAPMSYST 0500"
Screen line......... 16
Also i am pasting the screenshot of ST02
Nametab (NTAB) 0
Table definition 99,22 6.799 3.591 62,97 20.000 12.591 62,96 0 8.761
Field definition 99,06 31.563 345 1,15 20.000 13.305 66,53 244 7.420
Short NTAB 99,22 3.625 2.590 86,33 5.000 3.586 71,72 0 1.414
Initial records 52,50 6.625 3.408 56,80 5.000 249 4,98 817 5.568
0
program 99,58 300.000 1.212 0,42 75.000 67.561 90,08 7.939 46.575
CUA 99,08 3.000 211 8,84 1.500 1.375 91,67 23.050 846
Screen 99,46 4.297 1.842 45,00 2.000 1.816 90,80 81 963
Calendar 100,00 488 401 85,14 200 111 55,50 0 89
OTR 100,00 4.096 3.281 100,00 2.000 2.000 100,00 0
0
Tables 0
Generic Key 99,69 29.297 2.739 9,87 5.000 177 3,54 57 56.694
Single record 89,24 10.000 63 0,64 500 468 93,60 241 227.134
0
Export/import 76,46 50.000 40.980 83,32 2.000 2.676
Exp./ Imp. SHM 97,82 4.096 3.094 94,27 2.000 1.999 99,95 0
SAP Memory Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio %
Roll area 0,16 432 18.672 131.072 131.072 IDs 98,11
Page area 0,19 496 187.616 65.536 196.608 Statement 95,00
Extended memory 9,89 151.552 1.531.904 1.531.904 0 0,00
Heap memory 0 0 1.953.045 0
0,00
Regards,
Kalyani -
could anybody advice, ALV GRID FM(field catalog issue)is getting short dump, but workig fine for ALV LIST.
PERFORM create_field_catalog USING:
'TRAFFIC_LIGHT' ' ' 15 'Status' 'Status' ' ',
'VKORG' ' ' 15 'Sales Org' 'Sales Org' ' ',
'VTWEG' ' ' 15 'Dist Channel' 'Dist Channel' ' ',
'KUNRG' ' ' 15 'Payer' 'Payer' ' ',
'PAYER' ' ' 15 'Payer Name' 'Payer Name' ' ',
'KUNAG' ' ' 15 'Ship-To' 'Ship-To' ' ',
'SHIPTO' ' ' 15 'Ship-To Name' 'Ship-To Name' ' ',
'SHIPTOPAR' ' ' 15 'Bill to Party' 'Bill To Party' ' ',
'KDGRP' ' ' 15 'Customer Grp' 'Customer Grp' ' ',
'ZCUSTPO' ' ' 15 'Customer PO' 'Customer PO' ' ',
'VBELN' ' ' 15 'Billing Doc' 'Billing Doc' ' ',
'FKDAT' ' ' 15 'Billing Date' 'Billing Date' ' ',
'FKART' ' ' 15 'Billing Type' 'Billing Type' ' ',
'ZOUTPUT' ' ' 15 'Output Type' 'Output Type' ' ',
'NETWR' ' ' 15 'Net Value' 'Net Value' 'X',
'KWERT' ' ' 15 'Total VAT' 'Total VAT' 'X',
'WAERK' ' ' 15 'Currency' 'Currency' ' ',
'XBLNR' ' ' 15 'Reference' 'Reference' ' ',
'DELNO' ' ' 15 'Delivery #' 'Delivery #' ' ',
'TLINE' ' ' 15 'Manifest #' 'Manifest #' ' ',
'ZBOL' ' ' 15 'Bill Of Ldng' 'Bill of Ldng' ' ',
'LIFEX' ' ' 15 'Ext Del #' 'Ext Del #' ' ',
'POSNR' ' ' 15 'Item' 'Item' ' ',
'MATNR' ' ' 18 'Material' 'Material' ' ',
'KDMAT' ' ' 15 'Cust Matl' 'Cust Matl' ' ',
'WERKS' ' ' 15 'Plant' 'Plant' ' ',
'ZZPLAT' ' ' 10 'Platform' 'Platform' ' ',
'ZZPRONUM' ' ' 10 'Program' 'Program' ' ',
'ZZPROCODE' ' ' 10 'Prod Code' 'Prod Code' ' ',
'FKIMG' ' ' 15 'Qty' 'Qty' ' ',
'VRKME' ' ' 15 'UoM' 'UoM' ' ',
'ARKTX' ' ' 15 'Description' 'Description' ' ',
'KBETR' ' ' 15 'Price' 'Price' ' ',
'VATRT' ' ' 15 'VAT Rate' 'VAT Rate' ' ',
'KWERT_D' ' ' 15 'Item VAT' 'Item VAT' 'X',
'NETWR_D' ' ' 15 'Item Net Value' 'Item Net Value' 'X',
'VGBEL' ' ' 15 'Ref Document' 'Ref Document' ' ',
'VGPOS' ' ' 13 'Ref Doc Line' 'Ref Doc Line' ' ' .
FORM create_field_catalog USING fieldname TYPE c
inttype TYPE c
outputlen TYPE i
coltext TYPE c
seltext TYPE c
do_sum TYPE c.
DATA: l_f_fieldcat TYPE slis_fieldcat_alv.
l_f_fieldcat-fieldname = fieldname.
l_f_fieldcat-inttype = inttype.
l_f_fieldcat-outputlen = outputlen.
l_f_fieldcat-seltext_m = coltext.
l_f_fieldcat-seltext_l = seltext.
l_f_fieldcat-reptext_ddic = coltext.
l_f_fieldcat-do_sum = do_sum.
APPEND l_f_fieldcat TO t_field_catalog.
CLEAR l_f_fieldcat.
ENDFORM. "CREATE_FIELD_CATALOG
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_callback_user_command = 'F_USER_COMMAND'
i_grid_settings = f_grid_settings
is_layout = f_grid_layout
is_print = f_print_settings
i_background_id = 'BACK'
it_events = t_events[]
it_fieldcat = t_field_catalog
it_sort = t_sortcat[]
i_default = 'X'
i_save = 'A'
is_variant = f_variant
TABLES
t_outtab = t_output4
EXCEPTIONS
program_error = 1
OTHERS = 2.BEGIN OF t_output4 OCCURS 0,
traffic_light TYPE c,
vkorg LIKE vbrk-vkorg,
vtweg LIKE vbrk-vtweg,
kunrg LIKE vbrk-kunrg,
payer LIKE adrc-name1,
kunag LIKE vbrk-kunag,
shipto LIKE adrc-name1,
shiptopar LIKE likp-kunnr,
kdgrp LIKE vbrk-kdgrp,
zcustpo LIKE vbkd-bstkd,
vbeln LIKE vbrk-vbeln,
fkdat LIKE vbrk-fkdat,
fkart LIKE vbrk-fkart,
zoutput LIKE dnast-kschl,
netwr LIKE vbrk-netwr,
kwert LIKE konv-kwert,
waerk LIKE vbrk-waerk,
xblnr LIKE vbrk-xblnr,
delno LIKE likp-vbeln,
t_line LIKE tline-tdline,
zbol LIKE likp-bolnr,
lifex LIKE likp-lifex,
posnr LIKE vbrp-posnr,
matnr LIKE vbrp-matnr,
kdmat LIKE lips-kdmat,
werks LIKE vbrp-werks,
zzplat LIKE vbrp-zzplat,
zzpronum LIKE vbrp-zzpronum,
zzprocode LIKE a802-zzprocode,
fkimg LIKE vbrp-fkimg,
vrkme LIKE vbrp-vrkme,
arktx LIKE vbrp-arktx,
kbetr LIKE konv-kbetr,
vatrt TYPE p DECIMALS 1,
kwert_d LIKE konv-kwert,
netwr_d LIKE vbrp-netwr,
vgbel LIKE vbrp-vgbel,
vgpos LIKE vbrp-vgpos,
END OF t_output4, -
Hi Expert,
I face a DTP shortdump issue on loading data from PSA to DSO
The DSO is write optimize.
DTP is using symantic loading and support 3 processor, pack size is default
Situation is as below:
1. This issue occurs every two days. In some situation, it will occur everday
2. The DTP will face short dump. Then when we rerun the DTP, everything goes will
3. Not all the system face this issue (for example, we have dev/qas/prd, this issue cannot be reproduced in qas)
Below is the shortdump point in ST22
when '3'.
select single * from rsmonicdp into l_s_monicdp where
rnr = l_rnr and
icube = p_ods and
dp_nr = i_datapakid.
if sy-subrc <> 0.
data: l_s_iccont type rsiccont.
data: l_s_reqdone type rsreqdone.
select single * from rsreqdone into l_s_reqdone where
rnr = l_rnr.
if sy-subrc <> 0.
message x000.
endif.
l_s_reqdone-datum = l_s_reqdone-datum + 3.
if l_s_reqdone-datum < sy-datum.
select single * from rsiccont into l_s_iccont where
rnr = l_rnr and
icube = p_ods.
if sy-subrc <> 0.
exit.
else.
message x000.
endif.
else.
message x000. (Shortdump here)
endif.
endif.
l_s_monicdp-status = icon_red_light.
Could you kindly let me know you face simulation issue before and possible solution?
Thanks and best regards
Alex yangHi KP,
Thanks for your information.
Please check below information in ST22 side
Error analysis
Short text of error message:
Status Manager *****
Long text of error message:
Technical information about the message:
Message class....... "RSSTATMAN"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_RSSM_STATMAN_TARGET_ODSO===CP" or "CL_RSSM_STATMAN_TARGET_ODSO===CM007"
"IF_RSBK_DATAPACKAGE_OBSERVER~UPDATE_STATUS_TABLES"
BTW, do you think this issue will be related to larger data volum in DSO side?
Thanks and best regards
Alex yang -
Short Dumps in standard HR Business Event Group/Event creation transactions
Dear All,
I m getting short dumps whlile executing standard HR transactions for Creation of Business Event Groups and Business Event Types. Attaching the Short Dump text herewith. Can anyone plz. help...
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "RH_BASE_READ_INFTY_NNNN" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Eine Open SQL-Klausel wurde dynamisch angegeben. Der darin auftretende
Feldname "SUBTY" kommt in keiner der Datenbanktabellen aus der
FROM-Klausel vor.
Thanks and Regards,
Sudipto.Hi,
Check whether the OSS note 207515 is suitable for the below situation.
Summary
Symptom
A dump occurs in program SAPLRHDB: DBIF_NTAB_TABLE_NOT_FOUND
Additional key words
RH_BASE_READ_INFTY_NNNN, LRHDBU16
Cause and prerequisites
The system wants to access table HRPnnnn particularly by means of an entry in the infotype check table T777D. This access can be processed in various places, including in the profile generator. Here, a termination occurs if the 'ent' table/structure in the dictionary is no longer available. This generally affcts customer-specific infotypes. These have been created and possibly deleted again. However, the entry in table T777D is not available. You can also import the entry into another system with a transport of the table. If the HRP table/structure is then missing, a termination may also occur in this case.
Solution
You must check on an individual basis which infotype the termination refers to. If it is a customer-specific infotype, the customer is responsible for removing the cause of the termination. If the table entry is a 'remnant', the entry can simply be deleted.
If the termination refers to an SAP structure, you should consult SAP before carrying out any further activities.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 23.03.2000 23:00:00
Priority: Recommendations/additional info
Category: Customizing
Primary Component: PA-BC Basis
Releases
Release Independant
Satya -
Short dump: Network Control cannot be started
Hello Everyone,
i am not sure wheter i am right or not but here is my quesion:
I am running 2SAP NetWeaver 7.01 ABAP Trial Version" on Windows XP.
I am trying to learn Data Modelling in the BW Workbench.
When I try to change a "transformation process" in theDatawarehouing Workbench: Modelling" the programm will be terminated and i get the folowing short dump:
Error analysis
Short text of error message:
Network could not be launched due to control error
Long text of error message:
Diagnosis
Network control cannot be started either because is is not installed on the front-end computer, or because the control framework is inconsistent when the function is called up. To be able to start the network graphic, you need two OCX files that are delivered with the BW Frontend.
System Response
Processing has been terminated.
Procedure
Make sure that the OCXs ICDataFlow.ocx and wdbdadpt.ocx auf are
installed on your computer. You can find notes on installing and
checking the BW Frontend by searching for SAP Notes with the
following key words:
Version, sapservX, Setup, Patch, Installation, Frontend, BW,
sapbexc.xla, checktool, wdtaocx, wdtaocx.ocx
Does anyone know a solution for this problem? How can I install the "netplan control"?
Thanks for help!
ArneI think you need to install extra BI components into your GUI.
Read,
Error with "Creating Transformation for Master Data"
and
Re: Short Dump by creating Transformation
Regards
Juan -
Dear all,
hi,
i am working on upgrade from 4.6 to ECC6.
during unicode this statement is not working in ZReports.
IMPORT: it_vbrp FROM DATABASE indx(st) ID '1' ,
It is giving short dump. with message When importing object "IT_VBRP", the structure did not match the
structure of the target object. The error occurred in component
no. 3.
what should i do.
any help would be fine for me.
Thanks
Jairaj kumarDear all,
hi,
i am working on upgrade from 4.6 to ECC6.
during unicode this statement is not working in ZReports.
IMPORT: it_vbrp FROM DATABASE indx(st) ID '1' ,
It is giving short dump. with message When importing object "IT_VBRP", the structure did not match the
structure of the target object. The error occurred in component
no. 3.
what should i do.
any help would be fine for me.
Thanks
Jairaj kumar -
Internal Order status issue Error - Message Class X short dump
Hi All Experts,
I am creating internal order with CRTD status. However when I am trying to post transaction through MIRO , I am getting ABAP short dump mseeage class X. So I changed the CRTD to REL manually and able to solve the error.
But could any expert help me what is the logic behind this CRTD , REL, LKD etc ?
Since I am reading help.sap.com also as well but simple word help will be appreciable !
One more can we,
1 ) Create Internal Order with the REL status directly ?
2 ) If YES where configuration needs to be done
3 ) Will it hamper any business process ?
Exprts guidance will be appreciable.
Regards,
Sharvari Joshi.Hi,
All Masters,
Eli - Thank you for your answers.
Lawrence - Thank you for simple word that is what I was looking for.
Can anybody tell me how can we create IO directly in LKD status ? Or it is manual acitivity by clicking on Set / Rest button and then check LKD and save. I tried in KOT2_OPA but not no any option found. If any experts can guide for the following configuration would be great.
1 ) Is it possible to create IO with LKD status directly ?
2 ) Where that configuration needs to be done ?
3 ) What is significance of JEST Table relating to Internal Order ?
Exprerts help would be great !
Regards,
Sharvari Joshi.
Edited by: Sharvari Joshi on Dec 3, 2010 11:52 AM -
Now I want to get total weight of the material as weight * quantity. When I doing this process the program short dump.
If my user setting in su01 is 1,234,567.89 it will work normally, but if I changed my user setting to 1.234.567,89 it will get weight like 6,55 which cause short dump in total weight get. Please help me for solution that no mater user setting is dot or comma it will work successfully. thanks.I think the problem lies in fact that you are treating this variable as character one (of type c or string ) . This is not correct. You should use only packed numbers (of type p ) for calculation.
The user settings has nothing to do with the calculation. These are purely for displaying data, not for calculating them. So what you need is something like
data: weight type p decimals 2 value '1234567.89',
quantity type i value 3,
result(10) type p decimals 2.
result = weight * quantity. "the value stored in variable has form 3703703.67
"only when you display your data it will receive the format of user settings
write: weight, "displayed as 1,234,567.89 or 1.234.567,89 -> depending on the settings
result. "displayed as 3,703,703.67 or 3.703.703,67 -> depending on the settings
Regards
Marcin -
Short dump issue while loading data
Hello All,
We are trying to load the data to the cube , but every time it is throwing us a short dump with the below error.
We have found a SAP Note as well for the below error , Please suggest, how to implement the same.
Error:
Runtime Errors CONVT_NO_NUMBER
METHOD end_routine.
=== Segments ===
FIELD-SYMBOLS:
<RESULT_FIELDS> TYPE _ty_s_TG_1.
DATA:
MONITOR_REC TYPE rstmonitor.
... "insert your code here
-- fill table "MONITOR" with values of structure "MONITOR_REC"
- to make monitor entries
... "to cancel the update process
raise exception type CX_RSROUT_ABORT.
*Fiscal year quarter addition
loop at RESULT_PACKAGE assigning <RESULT_FIELDS>.
if <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 1 and 3.
CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q3' INTO
<RESULT_FIELDS>-/bic/zsp_FYQA.
elseif <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 4 and 6.
CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q4' INTO
<RESULT_FIELDS>-/bic/zsp_FYQA.
elseif <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 7 and 9.
CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q1' INTO
<RESULT_FIELDS>-/bic/zsp_FYQA.
elseif <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 10 and 12.
CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q2' INTO
<RESULT_FIELDS>-/bic/zsp_FYQA.
endif.
endloop.
ENDDMETHOD. "end_routine
THOD inverse_end_routine.
IMPORTINGHi,
As suggested by note, you need to put this code in end routine.
Check the syntax , if error go through it and fix syntax (take help of ABAPer if required) and
activate Transformation and DTP.
Thank-You.
Regards,
VB -
Custom error message in user exit is giving Short dump
Hi All,
We have a scenario where in if any user try to create/Change/Delete particular types of contract in SAP system we have to issue error message
saying ZIN/ZIR contract creation/Change/Deletion is blocked in SAP. This has to be done from the web application. So we are putting below code
in user exit MV45AFZZ in the form USEREXIT_SAVE_DOCUMENT_PREPARE.
CONSTANTS: lc_vbcpic01 TYPE sy-uname VALUE u2018VBCPIC01u2019, u201CWeb application user ID
lc_zin TYPE vbak-auart VALUE u2018ZINu2019,
lc_zir TYPE vbak-auart VALUE u2018ZIRu2019,
lc_text(32) TYPE c VALUE u2018Check long text for more detailsu2019.
DATA: l_uname TYPE sy-uname.
CLEAR: l_uname.
MOVE sy-uname TO l_uname.
*If user ID is not the Web application ID then block the creation/Change/Deletion
IF l_uname NE lc_vbcpic01
AND ( vbak-auart EQ lc_zin
OR vbak-auart EQ lc_zir ).
MESSAGE e830(zv) WITH lc_text.
ENDIF.
This code is working fine while creating/Changing the contract i.e. Giving us error message so that user wonu2019t be able to create/change the contract.
But when we delete the contract from VA42, Control is coming to this message statement and is giving Short dump. Below is the error analysis of the dump.
Error Analysis:
During "Exit Command" processing, the program tried to send a " " message.
This is not allowed at this point in processing.
The program had to be terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
If any one has come across such scenario/any work around for this problem please let me know your inputs. Your inputs are highly appreciated.
I am working on 4.6C version of SAP.
Note: When i issue information/Warning message contract is getting deleted after displaying the message.
Thanks,
Vinod.I exactly replicated the same in DELETE_DOCUMENT also
I am getting the Dump. I tried with exit also , but it continued and deleted. To avoid deletion we have to use Leave program or LEAVE TO CURRENT TRANSACTION.
Delete Function is Defined as EXIT command. so it is not possible to give error message. To convice you i just copied demo program and raised the error message.
it is also giving the dump.
copy the demo program DEMO_DYNPRO_AT_EXIT_COMMAND and make this change , information to error .
MODULE cancel INPUT.
MESSAGE e888(sabapdocu) WITH text-001 ok_code input1 input2.
IF ok_code = 'CANCEL'.
CLEAR ok_code.
LEAVE PROGRAM.
ENDIF.
ENDMODULE.
and see...
Maybe you are looking for
-
Qty and Price changes in GR(PO) Document
Hi All, One of my client want to restrict the Qty and Unit Price of GR(PO) Document in such a way where a user should not be able to change the Qty and Unit price while posting a GR(PO) Document. The System what is followed now
-
I arranged my photos in order and in folders on my PC. When I synced them to my IPad they were in the correct folders but completely out of order. How can I get them to sync in the order they appear on my PC?.
-
SXMB_MONI - Message has error on outbd. side
Hello, We have occurences when interfaces appear to be successful in the SXMB_MONI monitor for processed xml messages. The status flag = successfull. But there is a column just in front of "Message ID" that also has another status flag. When this
-
HT4061 my iphone locked.how can i use this
i have locked my iphone during restoring.how i find serial no,IMEI,MEID,CDN,ICCID NUMBER,
-
Selecting a repository when multiple repositories are available
Hi, We are trying to configure access to multiple repositories. We have Two entries in NQSConfig.INI: [ REPOSITORY ] Repo1 = Repository1.rpd, DEFAULT; Repo2 = Repository2.rpd; However, there doesn't seem to be any way to select which repository to us