CJ36 -BP - 164 - Capital investment budget exists for & - update not allowe

Hello Friends,
We are trying to post supplements using CJ36 for a WBS,but the system giving the error message saying that
" BP - 164 - Capital investment budget exists for & - update not allowed"
Please give some idea on this.
Thanks IN Advance
Best Reagdrs
Trupthi

Hi,
Even though CJ35 and CJ38 are both transactions to perform budget returns, it is important to know that they are working slightly different:
a) via txn CJ38 you return money exactly for the WBS elements you indicate an amount for. So if you indicate 1 COP for
   WBS element XX alone, the return is only being carried out for this WBS element. Since this WBS element is
   not (directly) attached to an investment program position, this is not a problem.
b) via txn CJ35, however, as per system design you return money for the WBS element you indicate p l u s for all WBS elements lying on the hierarchical path above, in order to guarantee that the budget remains consistent (= check error free).
   So by indicating 1 COP for WBS element XX, the system also tries to return the same amount from the overlying WBS element YYY.
Since this WBS element, however, i s attached to investment program position of investment program, the system blocks this posting because this program position forsees budget distribution and thus budgeting is allowed via budget distribution o n l y (txn IM52) - see e.g. F1 help for indicator 'Budg.dist. ovrl' in the master of the investment program position.
So basically you can say that txns CJ35 and CJ36 are not suitable for projects attached to investment program positions that forsee budget distribution. Please check your transaction IM52.
Please check if this fits with your scenario.
Best Regards,
Vanessa.

Similar Messages

ADF and MSSQL 2005 problems - FOR UPDATE clause allowed only for DECLARE C

Hi all.
I have a legacy application which uses MS SQL server 2000 / 2005. I've started to build up a new version of this application using JDev + ADF stack.
Everything went ok until I've tried to update some data in a Form. I'm getting this error:
com.microsoft.sqlserver.jdbc.SQLServerException: Line 1: FOR UPDATE clause allowed only for DECLARE CURSOR
Can someone figure out what's wrong?
1) In a MSSQL server connection string, normally we define the 'SelectMethod' parameter to 'cursor', as follows: jdbc:sqlserver://$host$:$port$;databaseName=dbserver;SelectMethod=cursor
Since I was not able to do this through my project's 'Application Resources > Connections' screen, I could not evaluate if this is the cause
2) I'm trying to follow the steps of an Oracle tutorial (http://www.oracle.com/technology/obe/obe11jdev/ps1/ria_application/developriaapplication_long.htm#ad), of course using MS SQL server instead of Oracle, and using some master->detail tables like the example suggests (in the tutorial, I've reached the step 11, then tried to update a record, which causes the mentioned exception)
Follows the stacktrace:
<Utils><buildFacesMessage> ADF: Adding the following JSF error message: Line 1: FOR UPDATE clause allowed only for DECLARE CURSOR.
com.microsoft.sqlserver.jdbc.SQLServerException: Line 1: FOR UPDATE clause allowed only for DECLARE CURSOR.
     at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
     at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerStatement.getMoreResults(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerStatement.seekToOutParams(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.getPrepStmtHandle(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doPrepExec(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source)
     at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelectForAltKey(BaseSQLBuilderImpl.java:707)
     at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:546)
     at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:7789)
Regards,
Luciano S. Lorencini, SCJP, SCWCD

So, I`ve created a test project and use the MSSQL flavor to create my Business Components.
After repeated all the steps, the error did not happen again.
But some strange behavior happen: I change some data and click the "Submit" button. The changed data appears ok in screen, but the changes were not committed in database!
Do I need to explicitly tell ADF to commit that changes somewhere?
Greetings,
Luciano S. Lorencini, SCJP, SCWCD

Apps still use an e-mail that no longer exist for updates

Several years ago I created an apple ID in itunes. Now that e-mail does not exist. Recently, an apple support rep walked me through the process of changing my apple id to my current e-mail address. Everything is working great except for updates. My iphone & ipad shows apps that need to be updated, but when I try to update them, it gives me the old e-mail address and doesn't let me change it. So I try to put in my old password that should match but it doesn't...because the apple i.d. and the e-mail address doesn't exist anymore.
So my question is this...How do I update apps that were purchased through an apple i.d. that still exists but is now associated with a different e-mail? It won't let me change to the new e-mail. I've tried everything.

I am having the same issue- all of my paid apps (magazine subscriptions) will not update with my REVISED (not new) apple ID- it keeps showing the one I changed it from when I go to update....

Check for Update not finding 1.2.1 patch

Hi,
I am trying to understand why my "Check For Update" doesn't appear to be able to find the latest patch 1.2.1 update.
I completed the upgrade to 1.2 via the "Check for Updates" screen which installed and then restarted on XP Pro.
In Help->About I now see Version 1.2.0 Build Main 29.98
When trying "Check for Updates" with the following checked :
- Official Oracle Extension and Updates
- Oracle SQL Developer (URL pointing to p=38606:2 not raptor:updates)
It returns with "No Updates available".
Interestingly if I de-select Official Oracle Extension and Updates, then it returns with the Oracle Data Mining PL/SQL package (which didn't appear with both selected) but still no update.
I've tried restarting and still get the same result.
Is it possible to download just the zipped patch file and perform "Install from local File"? I couldn't find a link to this on the Developer download URL- just links to seemingly full versions (i.e. a large Mb file).
Kind regards,
Andrew

thanks k - that worked a treat
I guess the clue was in the 1.5.1 part of the directory name - now I see it I would have chosen the 1.5.0 directory to migrate from. Duh!
It was early in the morning when I upgraded :)
/excuse

Check for updates not working in 9 pro

I am running Acrobat 9 pro on a Vista machine. Acrobat appears to have been malfunctioning (bates numbering is not working properly), and I uninstalled (and deactivated) Acrobat, and then reinstalled it.
After reinstallation, I used the check for updates feature in the help menu to update from 9.0 to 9.2. But now every time I run Check for updates from Help, nothing updates. I get a dialog that there is an available update, and then an icon System Tray appears and a process is active for AdobeARM.exe. But nothing ever happens-no update. I then force close the process from the task manager, and still no success in getting Acrobat to update.
What can I do? Thanks very much.

LeoAdobeX:
Thank you for your rely. Here is the more detrailed info:
1. I pulled down the Help menu and chose Check for Updates.
2. A dialog appeared that said an update was available; I clicked on the button that indicated I wanted to download and install the update
3. Nothing further appeared onscreengiving my information or choice, but an incon then appeared in the system tray for the installer.
4. Hovering over the icon does not pop up any status information. If I click, double click, or right click on the incon in the system tray nothing pops up, and nothing appears. At that point I get absolutely no response.
5. If I go to task manager at that point it shows the active process AdobeARM.exe and gives no indication of it malfunctioning. But nothing installs and nothing downloads and nothing happens.
6. If I then pull down the Help menu and chose Check forUpdates again, I get a dialog that says the updater is already running.
7. All of this occured immedaitely after I reinstalled 9 pro.
I hope this additional info helps. Thanks very much.

Oracle select for update: not releasing lock

My JDBC code uses "select for update" to modify record in Oracle database. I tried to simulate network connection down situation.
After my JDBC code locked on a record using "select for update", I unplugged the network cable. I then tried to run the same code on another computer, but it could not accquire the lock, because the previous lock was not released. I tried sqlplus to lock the record, but failed also. The lock has been there for at least an hour now. I guess it may finally be released, but is there a way for oracle to release the lock as soon as the connection is down? Not know if it is a JDBC setting or oracle setting.

Dear Friend,
What you are trying to do is not correct way of checking the concurrency and transaction.
The reason is as listed below.
01.Always remember http is a stateless protocol and removing the connection or just closing the browser will never be informed to the database or to the application server thus the transaction monitor (TM)or processor will never release the lock as it will deem that the actor is manipulating the data.
02.As per locking goes every database is having a �TM� and the default isolation level setting is different like oracle uses serializable DB2udb 7.0 or db2/As400 uses repeatable read. You can change this setting by editing the default setting in the database but be very sure before touching it.
03. You can also transpose this with your Application server setting for that piece of code or Globally but again be very sure about it as it will change the entire gamete.
04. For releasing lock you have to manually do it or you can change the settings of App server or the Database to release the connection after some wait time.
Regards,
Ruchir

Select single for update not creating lock on entry

Hi All,
I want to update an entry from MARA table so what ii did is
select single for update *   from mara where matnr = 'ZYS'.
The for update is supposed to create a lock for me and the the lock is released after the commit or roll back.
I'm running this prg in debug mode and after the statment
select single for update *   from mara where matnr = 'ZYS''.
I opened MM02 for this material and could change the data which i'm not supposed to be as there is lock on this particular mater from single for update statemnt
or
I even tried from other program
select single *   from mara where matnr = 'ZYS'. in debug mode and it returned a sy-subrc eq 0.
and i don't see a lock in SM12 FOR SELECT * FOR UPDATE.....
Can anyone clarify on this
Thanks
David

Hi All,
I knew we can create a lock object but thought to give a shot without creating lock object.
So i'm just curious to know when we can use select * for update
F1 Help says select * for update creates an E type lock- which will prevent other locks(X AND S type locks) overwriting or even reading that entry
Also ,
can someone throw some light DB lock and SAP Lock ( is this same as SAP LUW and DB LUW)
Thanks
David

Check for update not working for Patch 2???

I am running 1.0.0.14.67. When I run the Check For Update command it says there are no updates available even though Patch 2 is now on the OTN site. Is there anything I can try other than downloading the whole new zip and migrating my install?
Previously I have successfully used the update centre to install new patches for the various extensions, so I don't think it's a problem with my firewall settings.
Cheers, APC

Ok - one other thing. If you run check for updates, then the front "Help > About " will not change. So this will still show 1.0.0.14.67, but the Extensions tab will change. Can you just confirm that? Check out the screen shot in this FAQ. So the various extensions will show the 15.57 updates if patch 2 is already installed.
As far as I'm aware we do not have the patch set available as a separate bundle. I'll have to wake to for Kris to get in (west coast) before we can check that.
Sue

Check for Update Not Working

After installing 8.00c.08 on WinXP Pro under tools/options/software updates is greyed out.

Bill, there's a few things that could cause this.
I was able to find some good info by searching our Knowledge Base: https://service.sap.com/notes for "auto update greyed out" you'll have to log in to view these KBAs.
[1309275 |https://bosap-support.wdf.sap.corp/sap/support/notes/1309275 ]- Troubleshooting issues with the Automatic Update feature
[1278929 |https://bosap-support.wdf.sap.corp/sap/support/notes/1278929] - Check For Updates and Software Updates are grayed out
[1421565 |https://bosap-support.wdf.sap.corp/sap/support/notes/1421565] - How to fix the Automatic Update feature when it is grayed out

JDeveloper 11.1.1.3.0 Check for Updates Not Working

I wanna deploy Jheadstart extension in My JDeveloper(11.1.1.3.0). What happens when I try to launch Check for Updates in JDeveloper (11.1.1.3.0) I got a pop message ("Unable To Connect"). in the details it says:
java.io.IOException: Server returned HTTP response code: 403 for URL: http://www.w3c.org/TR/1999/REC-html401-19991224/loose.dtd
I even tried to add an entry for one http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/131167.xml as a new update center but I caoludn't find the JHeadstart version
What happened to the update Server and is there another way to download JHeadstart for this JDeveloper version
we are stucked to this version as the project started and there is no clear update might happen to the version happening soon.

The Above XML URLs works fine. All manual install can be done from these URLs:
. Oracle Fusion Middleware Products Update Center:
http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/156082.xml
. Oracle Extensions for Oracle JDeveloper Update Center:
http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/131167.xml
. Oracle JDeveloper Third Party Extension Exchange:
http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/130355.xml
Edited by: Ahmed Gamal on Jul 10, 2012 5:52 PM

Error 11333? Check for updates not working, help please...

I got the message 11333 when I tried to open iTunes for the first time, so I checked for updates. But when I "check for updates" in iTunes, it tells me that "server could not be contacted, check your internet connections and try again". I am connected to the internet and I'm able to surf the web, so what's going on? I'm working with a PowerPC G5 with a dual processor. Version 10.5.8

Already answered in your duplicate thread:
https://discussions.apple.com/message/19062041#19062041
Please do not double post the same question.

Decision Type 4 for BUS2201 not allowed

Hi,
Can anyone tell me why decision type 4 for BUS2201 is not allowed? We would like to use same logic for our PO's as with our SC's.
Our SC's are being approved using decision type 4 with the area of responsiblity being the cost center, so the cost center responsible will approve a subset of the items in the SC.
With Decision type 4 not being allowed for BUS2201, we simply can not use the same logic.
So, do any of you guys know why this decision type can not be used for BUS2201?
Regards
Olsey

Hi Per Thue Olsen,
I am assuming you are in Extended Classic Scenario and would like to implement the PO change work flow with BRF. We have implemented SRM 6.0 PO change work flow and it is true that type 4 is not supported for BUS2201.
Quick questions: Who are the users changing the PO?
If your design is allow only Purchasers to change the PO's then, you may develop the following concept.
01) implement version management.
02) During WF, read the changed document and read changes for lines.
03) determine the number of cost center approvers upfront.
04) Depending upon number of cost center approvers, dynamically create process levels (there is a badi given by SAP to determine the run time process levels in the process schema).
05) then, use the other methods in the derive agent badi and force the cost center managers as approvers.
06) Probably you may need to use decision type 2 here.
The only trade off here would be parallel approvals for the PO change cannot happen instead the approvals would be sequential. But, even the parallel approvals with decision type 4 will have to wait for the transmission of the PO to the supplier till the all the decision sets are executed by approvers. The cycle time of the approvals may not change with the decision type 4 or 2, but each approval would be valid for the entire document.
Another way to avoid this situation is use the Group SC badi to enhance the SC Split rules to include CC also as one of the criterion. The trade off here would be multiple PO's would be generated to the same supplier just because of different cost center. This case, as the PO is split per CC manager, you need not implement the decision type 4 instead you can go with decision type 1 which is supported by SAP for BUS2201.
Thanks,
DV

Check for Updates not working

I bought the iPod Tough update and it won't work. I realized that I needed v1.1.3, but when I click on the Check for Update button, it says the iPod Software update server could not be reached.

Probably because every other person who bought a Touch is trying to do exactly the same thing. If I were a patient person, I'd wait until tomorrow and try again.
No one ever said I was a patient person.

Check for updates not highlighted

I have updates needed for apps on my iphone. When I connect and open itunes, go to the apps in library, the "check for updates" down on the bottom right is not highlight and therfore I can not access. How do I correct this?

You don't need to connect the iPhone to check for updates to apps in iTunes.
And you don't need to connect the iPhone to update the apps directly on the iPhone. Open App store then tap Updates at bottom right.

Why does "check for updates" not download new version of itunes?

On windows XP FP 3, if I start Itunes of late I get a messsage that there is a new (10.5.3) version of itunes to download. I agree to download iTunes, and itunes freezes up for a bit, then nothin. Suggestions? I am getting tired of uninstalling and reinstalling every time this happens.

Check for updates is intended for use after production when we might have small changes to 1-2 files. Our current releases have many changes to many files and might almost be as large as the download. Also, we are still making structural changes to the storage of the code (shifting around preferences, etc). For the Early Adopter Releases, we really want people to download and install in a clean directory. After production, we will support check for update.
-- Sharon

CJ36 -BP - 164 - Capital investment budget exists for & - update not allowe

Similar Messages

Maybe you are looking for