CJIC settlement in company code currency

Hi
All our European companies have USD as controlling are currency and euro as company code currency. We capitalize assets using CJIC. We recently got a new requirement from one of the European company saying they should be able to settle or capitalize to multiple assets either using amount or per centage. But when the amount is entered it always takes dollars (controlling area currency) instead of euro. Even the per centage is on dollars (controlling area currency).
Is there a way to change the currency (i.e. to company code currency) in CJIC.
Thanks
Joseph

Hi Joseph,
We cannot change the companycode currency in CJIC...
As your Controlling area currency in USD...obviously all your reports in projects with show with units of USD only.....
This is not possible with standard SAP...however we can do it by development.
Appreciate if it is helpful to you
Regards
Vetri

Similar Messages

Activation of company code currency flag in CO-PA

Hello,
I have activated company code currency flag in CO-PA. I understand that CE1xxxx records are created in company code currency flag after activation.
Is there a tool available to create the records retrospectively for transactions posted in the prior months / year?
Thanks
Sanjiv Agrawal

Using KE21n will require each document to be posted manually to CO-PA.
I looked at KE4S and it only allows billing documents to be posted to CO-PA. In our case, CO-PA documents get generated
at the time of sales order settlement.

CJ718 - Currency in requesting company code must be company code currency

Hi Colleagues,
I need to define in the WBS element "Requesting cost center field" in (CJ20N tcode) the cost center with different currency and controlling area, howerver the system does not allow and the follow message was showed "CJ718 - Currency in requesting company code must be company code currency".
I would like to know, is this possible? How can I do it?
Kind Regards,
Lima, Vanderlin.

I dont think this is possible. Read this Note 201049 - Different company code currencies in WBS element , This note doesnt solve your purpose it is to correct if system allows you to assign different company code currencies and it clearly says that if you have different company code currency in a WBSE then you will have problem in settlement, so this is not allowed.

Impacts of new company code currency

Hi Gurus,
We have a company code which is setup 2 months back. We have it setup with USD and this company code is assigend to a controlling area in one -one basis. So it should be fine . But now business want to change the CCode currency. All G/L and master data is created with USD. What would be the impacts if we change currency of master data also into new currency? We have no New-GL . We used special ldgers but just for a specific activity.
Any thoughts ?
Thanks,
GB

Hi GB,
If there is no transaction data posted in your company code then you can change the company code currency and in GL Mater data. But if transaction data is already been posted then its better to create new company code with new GL Master data and currency setting and upload transaction data posted in last two months.
Regards,
Santosh

Seeking Information on Company Code Currency in COPA

Greetings all,
I am working on a project to activate the company code currency flag in COPA (attributes under KEA0). I have activated the flag in a test system and as expected I now get two PA docs, a 10 and a B0. The oddity begins when I compare PA docs created from SD and FI. In my example I am creating documents in three different currencies; 1) transaction curr = SEK, 2) company curr = EUR, and 3) operating concern curr = USD. I am on ECC 6.0 EP 4.
If I create a PA from a billing document (record type F) then the data looks exactly as I expect it. The foreign currency key (FRWAE) is SEK. I can see the transaction currency is SEK with value fields in SEK, I can see the company currency is EUR with an exchange rate of SEK <-> EUR along with value fields in EUR, and I can see the operating concern currency is USD with an exchange rate of SEK <-> USD along with value fields in USD.
However, if I create a similar document with FB50 (record type B) the foreign currency key (FRWAE) is EUR instead of SEK and the exchange rate to USD is 1 (KURSF) instead of the actual exchange rate. I only get company currency and operating concern currency values. The values in the value fields are correct per currencies eventhough the fx rate is whacked. In FI the transaction currency is SEK but you would never know it in PA. The really bizarre thing is when I go to display the PA doc (I am branching from the FI doc) it behaves very odd. The default view is Op conc which is in USD. If I click the foreign curr button it displays USD. If I click the company code curr button it displays EUR. If I then go back to the foreign curr view it is now in EUR???
I am hoping someone can explain the difference between the two, or at least point me to a good resource. If there is a rational reason for this system behavior then I am hoping someone can suggest some way to manipulate the data.
Many thanks,
Chris

Hi,
CO-PA will only store values in either operating concern currency or company code currency(if active). For FI postings CO-PA fills the field foreign currency in the CO-PA line item with the currency with the currency of the company code. The reason for this is that the currency conversion for FI documents is that the currency conversion for FI documents is executed with the
company code currency and the field FRWAE is always filled with the currency that is used for conversion. This is designed in order to allow a reconciliation between FI and CO-PA. CO-PA uses company code currency as the base to convert to operating
concern currency for FI postings. The field FRWAE is not intended to reflect the transaction currency. It is just used to store the currency from which the conversion to the currency of the record is made.
In case of direct postings from FI/MM CO-PA takes over group currency directly if group and operating concern currency are identical. As group currency is translated in FI with exchange rate ( according the settings in transaction 'OB22' for company code) you'll find this exchange rate in CO-PA too. I have attached SAP Note 604936 to this ticket that describes the translation logic used in PA for postings from FI and MM.
The currency translation from SD however works differently as described in SAP Note 429517. In this case PA will not consider any values in group currency. Values in operating concern currency are either translated based on transaction or company code currency using exchange rate type 'M'.
Hope this will help.
Best regards, Takashi
Edited by: Takashi Kotani on Mar 6, 2010 2:24 AM

Company code currency balance not equal Group currency balance

Dear experts,
Some of our account balances are inconsistent bewteen the company code and the group amount. This company has the same currency in both the company code and group currrencies which are USD. The exchange quotation is also setup in OB08 with 1 in both dir / indir quote. Below is an example for a HKD expenses with a HKD AP account.
GL accounts setup with same currency as company code / group currency.
Exchange quotation setup in OB08 for HKD to USD is dir.qut. 7.8 and indir.quot 7.8.
After translation, the result supposed to be,
In Document currency, Dr expenses HKD780, Cr AP HKD780
In Local currency (company code currency), Dr expenses USD100, Cr AP USD100
In Group currency, Dr exepnses USD100, Cr AP USD100
However, the current result is,
In Document currency, Dr expenses HKD780, Cr AP HKD780
In Local currency (company code currency), Dr expenses USD100, Cr AP USD100
In Group currency, Dr exepnses USD110, Cr AP USD110
The amount in local and group currency should be the same supposedly as they are in the same currency.
Have anyone ever experienced the same situation?

Thanks all,
I have checked that both 1st local currency (company code currency) and 2nd local currency (group currency) are USD.
Our user also didn't change the group currency amount during data entry as there seems no way to alter the amount as it is greyed out.
Is there any other configuration or system flow that may be configured to post these 2 currency amount in a different way of translation?

Conversion error in company code currency for general costs activity

PS Experts,
Please guide me in the following , The below message appeared when i created a customer project in CJ20N in our new DEV server
This is the scenario
Create customer project with 3 WBSE, each one has 3 NTW and 3 activities, i maintained the cost with currency same as project curr and company code currency in the first two act.
in the third activity (General act) in cost tab i put a currency is different than project currency& company code currency and tried to save the project, the message appears.
note: Company code curr same as projet curr & controlling area curr
Is there any setting is missing in customizing
Conversion error in company code currency for general costs activity 0010
Message no. CK443
Diagnosis
For cost activity 0010, a conversion error occurred in the currency of the company code to which the material is assigned.
Procedure
Check the global settings in Customizing to be sure the exchange rate for conversion into the company code currency is correct
Thanks

Hi Yassin,
I believe you have maintained exchange rates for rate type M as per your config in OPSB.
Now do one thing, maintain the conversion rate for P for those currencies in OB08 and then save your project.
This will solve your problem.
Regards,
Kabir

Miro Company code currency amount displaying 0, incorrect posting

Dear All,
When I use miro to simulate one of my posting which is in the foreign currency is showing incorrect when changing to company code currency.
By right there should be a ppv posted, however it does not show the gl accoutn for the vendor and the amount is totally wrong and it only show the gr/ir clearing amount which is correct.
Any kind souls can help me?
Many Thanks!!!

Anyone can help ???

Document Currency Vs Company code Currency.

As per business requirement Company code level currency is mainatained as USD but when i am generating the Excise invoice for loacl currency INR., the Excis edocument posting in USD . can any body helpme out to Post excise invoice as document currency where Excise tables is also updating the USD.
rgadrs
Ramesh.

Closing this Thread as I found the answer
Within the Purchase Order, when the new TOTAL NET ORDER VALUE is higher than the old one, release strategy will be triggered once release charateristic is set for checking rule
System will check through The total net order value which is linked to CEKKO-GNETW for a purchase order.
In purchase order, the currency conversion will act as below:
Purchasing documents: Header currency converted to company code currency.
Company currency converted to characteristic currency
Hence, eventhough the exchange rate is increased but document currency is remained unchanged, the company code currency is increased and hence trigger release strategy.
for more information, please refer to http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE

Different company code currency

What is the significanc of flagging "different company code currency" in OKKP setting.
What are the advantages of the above settings?
What kind of reports available by flagging this?
Moderator: Please, read help.sap.com

Hi Anilkg
We are not able to directly check this indicator. When you select the currency type other than 10-Company code currency, this indicator gets indirectly ticked and thereon the system allows different company code currency for the companies which are assigned to one controlling area which has specific controlling area currency. There is no specific advantage or report by this tick. It only informs that different currencies are allowed for the companies assigned to the controlling area.
Trust this helps much!
Cheers!

Hungary VAT report in HUF - company code currency is EUR

Hi,
We have the below requirement from our client.
Company is incorporated in Switzerland and is having a plant in Hungary.
We have decided to have 2 company codes one with country key as CH(switzerland) and the other with country key as HU (Hungary).
The client wants to have the currency for the Hungary company code as EUR (Company code currency)
Requirement: VAT report generation in currency HUF for the Hungarian company code. While accounting should consider the European bank rates for converting foreign currency Invoices into EUR, the VAT report should consider the Hungarian Bank Rates for converting all Invoices into HUF. This conversion should be on daily rates for all the invoices.
There is an option to activate report generation in an Alternative currency (RFASLD15). However, the translation is made on a fixed translation date to be given in the report selection criteria.
Any suggestions to meet the requirement would be of great help to us.
Many Thanks
Hema

Hema,
Please activate hard currency(Local currency 3) as HUF, so that you can have transaction amounts in HUF also eventhough your company code currency is EUR.
Please check F.12 report for your VAT requirement.
Here you have to capture BSEG-DMBE3 value as per your requirement.
Rgds
Muarli. N

Cost centre reports in Company code currency

Hi
I want to check all reports in company controlling area currency and company code currency. Controlling area currency is USD and company code currency is SAR.
For example when i execute the following report it shows only in controlling area currency.
S_ALR_87013611 - Cost Centers: Actual/Plan/Variance
KSB1 is working fine I can check object currency which called company code currency.
regards
imdad

Hi Ajey
I have make changes in RPC0 following changes and as you said re-login but still this report showing results in controlling area currency instead of company code currencye.
Reporting currency tab:
- Select radio button controlling area currency
Currency Translation into target currency
- Select radio button object currency
Exchange rate
- Current
Exchange rate type
- M
Its still not working, whats wrong setting in RPC0. please advise.
regards
imdad

Report Similar to CN41N which is having values in Company Code currency

Hello All,
In my landscape Controlling Area Currency is GBP & Company Code Currency is EURO.
I want to see all the values in CN41N in EURO only but not able to see the same because as per standard SAP it will show in GBP only.
Can anyone suggest me any other report or any settings in CN41N itself so that i am able to see values in EURO.
Thanks & Regards,
Ankush Sethi

Hello,
Yes, i tried with RPPO as well but still not able to see the values in EURO.
Thanks,
Ankush

Company code currency change over

Dear all,
Want to know information about company code currency changes.
Our company code currency is SGD and now want to change to USD.
Our fiscal year is Jan-Dec and we are in SAP 5.0 version.
Can you let us know whether itu2019s possible to do the change?
If so, how and can we perform this activity in the middle of the year.
How to take care of the open items like PO,SO,Vendor ,Customer, which we have already posted in the system with our SGD currency.
And if not, do suggest and alternate/workaround.
Heard about, that this can be achieved with PARALLEL CURRENCY activation.
Not having much idea about Parallel Currency.
Do suggest.
Regards,

Hi,
A change of the company code currency is possible. The change is only possible as at year end (the actual running of the programms can be done mid-year provided certain customising has been done prior to the first posting in that year).
All items will get changed from old local currency to new local currency.
You can read the documentation in Spro > Cross-Application Components > EMU > Local Currency Changeover.
This is a very complex procedure so be sure to read all the documentatin first.
Kind regards

Ledger group currency Vs Company code currency

Hello Experts,
Can any one tell me the difference between Ledger group currencies and Company code currencies in New GL in ECC 6.0?
Also can anyone explain me any scenario where and why we use different currencies in Ledger group and Company code ?
Regards,
Sriram

Hi,
In New GL we can use different currencies for ledgers. We can maintain 3 types of currencies for each ledger. 1st one should be company code currency. You can maintain additional 2 currencies as you choice which assigned to co code and group. You can generate the report in different currencies for each ledger
Thanks & Regards
Assign points if useful

CJIC settlement in company code currency

Similar Messages

Maybe you are looking for