CJS-30149 ABAP processes of instance ISP/DVEBMGS00 [ABAP: UNKNOWN] did not
Hi All,
I'm installing ECC6 sr3 on DB2.My OS is Win2003 Ent Edition.The installation is on a cluster.While installing SAP i'm facing a error at phase 47 which states CJS-30149 ABAP processes of instance ISP/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:00 Mins Giving up.I've provided the dev_rfc.trc file below
>TS> Thu Jan 22 11:09:04 2009
T:204 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ISP, GWHOST=SAPPROD, GWSERV=3300
LOCATION CPIC (TCP/IP) on local host
ERROR partner 'SAPPROD:3300' not reached
TIME Thu Jan 22 11:09:04 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 777
dev_disp
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ISP
systemid 561 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 5052
Wed Jan 21 22:00:25 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5052) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jan 21 22:00:30 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPPROD_ISP_00 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000185B0050, size: 6348592)
DpShMCreate: allocated sys_adm at 00000000185B0050
DpShMCreate: allocated wp_adm at 00000000185B2150
DpShMCreate: allocated tm_adm_list at 00000000185B83A0
DpShMCreate: allocated tm_adm at 00000000185B8400
DpShMCreate: allocated wp_ca_adm at 0000000018B1C2A0
DpShMCreate: allocated appc_ca_adm at 0000000018B22060
DpShMCreate: allocated comm_adm at 0000000018B23FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000018BAAC30
DpShMCreate: allocated gw_adm at 0000000018BAACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000018BAACE0
DpShMCreate: allocated wall_adm at 0000000018BAACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> CreateFileMapping name=ES_SEG_00_007 error=1455 [esnti.c 1184]
ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c 1186]
Memory diagnostic *
Systeminformation
Processor-Typ : Processor-Count : 4
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 52426752 K
Config. maximum size : 55570432 K
Avail. maximum size : 55570432 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
2095104 K
4190208 K
4190208 K
2476072 K
2
h:\pagefile.sys
50331648 K
51380224 K
51380224 K
51380224 K
NT Task Manager Informations
Total Handles : 66
Total Threads : 0
Total Processes : 123823424
Commit Charge Total : 6619245 K
Commit Charge Limit : 1548 K
Commit Charge Peak : 0 K
Phys.Memory Total : 3538996 K
Phys.Memory Available : 0 K
File Cache : 123823424 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 48 K
Kernel Memory Nonpaged : 0 K
Memory usage of current process
Total virt.address space : 0000007499415424 K
Avail.virt.address space : 0000007498310960 K
Private Pages : 0 K
Total heap size : 21337 K
Virtual memory regions : 0 K
Uncommitted heap memory : 13208 K
Allocated heap memory : 6546 K
Moveable heap memory : 605 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4380
msg_server.EXE
[MS] ISP_01
15832 K
15832 K
12344 K
12344 K
1
4032
enserver.EXE
[**] ISP_01
25592 K
25592 K
56632 K
56640 K
3
5636
sapstartsrv.exe
28664 K
28664 K
18712 K
18712 K
4
6036
msg_server.EXE
[MS] ISP_00
16072 K
16072 K
12736 K
12744 K
2
5052
disp+work.EXE
51568 K
51664 K
190464 K
241904 K
6
276
igswd.EXE
[**] ISP_00
7120 K
7344 K
2640 K
3000 K
0
4272
igsmux.exe
20304 K
20304 K
17632 K
17632 K
2
3272
igspw.exe
6328 K
6328 K
3448 K
3448 K
0
988
igspw.exe
6328 K
6328 K
3448 K
3448 K
0
Sum
177808 K
318056 K
Error 11 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 9634]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 9561]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 21 22:00:40 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Jan 21 16:30:40 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
16 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Wed Jan 21 16:30:40 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Wed Jan 21 16:30:40 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Jan 21 16:30:40 2009
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 21 22:00:45 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPPROD_ISP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5052) [dpxxdisp.c 10421]
Good Bye .....
One more issue is that when i try to move my cluster from active to passive node the shared folders /sapmnt,saploc and db2dumps disappears and even after restoring the cluster to the active node i'm unable to see the shared folders.
Can anyone help me out in resolving this issue
Regards,
Raj
Edited by: Rajagopal Desikan on Jan 26, 2009 8:58 PM
> *** ERROR => <EsNT> CreateFileMapping name=ES_SEG_00_007 error=1455 [esnti.c 1184]
> *** ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c 1186]
You did not meet the requirements necessary for a SAP installation, you pagefile is too small. Check the installation guide for necessary pagefile requirements.
Markus
Similar Messages
-
Hi All,
Im installing EHP6 on windows server 2008 r2 (VM ware 10). After getting past my initial problems, im stuck on step 21/29.
Create Instance. Im getting the attached error.
I can make out from this file that it is network related issue, but cannot find a solution to this. Can anybody please help me out?
Here are my trace files :
1. dev_disp:
trc file: "dev_disp", trc level: 1, release: "720"
sysno 00
sid IDS
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 100
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\VINEETABAP\sapmnt\IDS\SYS\profile\IDS_DVEBMGS00_VINEETABAP
pid 4508
kernel runs with dp version 131000(ext=118000) (@(#) DPLIB-INT-VERSION-131000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4508) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 100 successfully loaded
shared lib "dw_xtc.dll" version 100 successfully loaded
shared lib "dw_stl.dll" version 100 successfully loaded
shared lib "dw_gui.dll" version 100 successfully loaded
shared lib "dw_mdm.dll" version 100 successfully loaded
shared lib "dw_rndrt.dll" version 100 successfully loaded
shared lib "dw_abp.dll" version 100 successfully loaded
shared lib "dw_sym.dll" version 100 successfully loaded
shared lib "dw_aci.dll" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Sun Aug 24 11:27:37 2014
*** ERROR => NiHLGetHostName: NiPGetHostByAddr failed (rc=-1) [nixxhl.cpp 495]
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 6 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6404]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >VINEETABAP_IDS_00 <
DpShMCreate: sizeof(wp_adm) 43024 (2264)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
DpShMCreate: sizeof(comm_adm) 584080 (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2152)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F7D0050, size: 6368736)
DpShMCreate: allocated sys_adm at 000000000F7D0060
DpShMCreate: allocated wp_adm_list at 000000000F7D3040
DpShMCreate: allocated wp_adm at 000000000F7D3230
DpShMCreate: allocated tm_adm_list at 000000000F7DDA50
DpShMCreate: allocated tm_adm at 000000000F7DDAA0
DpShMCreate: allocated wp_ca_adm at 000000000FD209B0
DpShMCreate: allocated appc_ca_adm at 000000000FD303C0
DpShMCreate: allocated comm_adm at 000000000FD3FDD0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000FDCE770
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 000000000FDCE820
DpShMCreate: allocated j2ee_adm at 000000000FDCE860
DpShMCreate: allocated ca_info at 000000000FDCF7E0
DpShMCreate: allocated wall_adm at 000000000FDCF870
DpCommAttachTable: attached comm table (header=000000000FD3FDD0/ft=000000000FD3FDE0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 2047MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 2048MB
Sun Aug 24 11:27:38 2014
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1673]
Sun Aug 24 11:27:43 2014
*** ERROR => MsIAttachEx: NiBufConnect to VINEETABAP/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1774]
Sun Aug 24 11:27:58 2014
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Sun Aug 24 11:27:59 2014
CCMS: Initalized shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
Sun Aug 24 11:28:00 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
Sun Aug 24 11:28:37 2014
*** ERROR => MsIAttachEx: NiBufConnect to VINEETABAP/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
*** ERROR => DpHdlDeadWp: W0 (pid 5580) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W1 (pid 5328) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W2 (pid 4940) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W3 (pid 5824) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W4 (pid 2700) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W5 (pid 4052) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W6 (pid 5148) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W7 (pid 5932) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W8 (pid 4540) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W9 (pid 5616) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W10 (pid 3076) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W11 (pid 4592) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W12 (pid 164) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W13 (pid 1988) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W14 (pid 5400) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W15 (pid 5916) died (severity=0, status=0) [dpxxwp.c 1522]
*** ERROR => DpHdlDeadWp: W16 (pid 5464) died (severity=0, status=0) [dpxxwp.c 1522]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:47 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sun Aug 24 05:58:47 2014
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
0 DIA -1 Ended no no 1 0 0 NO_ACTION
1 DIA -1 Ended no no 1 0 0 NO_ACTION
2 DIA -1 Ended no no 1 0 0 NO_ACTION
3 DIA -1 Ended no no 1 0 0 NO_ACTION
4 DIA -1 Ended no no 1 0 0 NO_ACTION
5 DIA -1 Ended no no 1 0 0 NO_ACTION
6 DIA -1 Ended no no 1 0 0 NO_ACTION
7 DIA -1 Ended no no 1 0 0 NO_ACTION
8 DIA -1 Ended no no 1 0 0 NO_ACTION
9 DIA -1 Ended no no 1 0 0 NO_ACTION
10 UPD -1 Ended no no 1 0 0 NO_ACTION
11 ENQ -1 Ended no no 1 0 0 NO_ACTION
12 BTC -1 Ended no no 1 0 0 NO_ACTION
13 BTC -1 Ended no no 1 0 0 NO_ACTION
14 BTC -1 Ended no no 1 0 0 NO_ACTION
15 SPO -1 Ended no no 1 0 0 NO_ACTION
16 UP2 -1 Ended no no 1 0 0 NO_ACTION
Dispatcher Queue Statistics Sun Aug 24 05:58:47 2014
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+------------+------------+
| DIA | 2 | 2 | 2000 | 2 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 5
wake_evt_udp_now 0
wake events total 5, udp 4 ( 80%), shm 1 ( 20%)
since last update total 5, udp 4 ( 80%), shm 1 ( 20%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.011111 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.011 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.000000 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Sun Aug 24 05:58:47 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T19, U20, , , 11:28:00, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Sun Aug 24 05:58:47 2014
=============================
Slots: 1000, Used: 0, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:52 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >VINEETABAP_IDS_00 < (normal)
DpJ2eeDisableRestart
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (1192) (SOFT_KILL)
*** ERROR => DpProcKill: kill failed [dpntdisp.c 397]
DpHalt: stop icman
killing process (4164) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 19
DpWpBlksLow: wp_blks_in_queue/limit/max = 0/800/1000
DpLockWpBlkEx: my wp blk start index is 0
DpLockWpBlkEx: lock wp ca_blk 0
return errno (-17) to T19
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T19/M0
NiBufSend starting
NiIWrite: hdl 18 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 0
set status of T19 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 18 in set0
SiSelNSet: set events of sock 428 to: ---
NiBufISelRemove: remove hdl 18 from set0
SiSelNRemove: removed sock 428 (pos=2)
SiSelNRemove: removed sock 428
NiSelIRemove: removed hdl 18
DpDelSocketInfo: del info for nihdl 18 (pos/type=2/3)
NiICloseHandle: shutdown and close hdl 18/sock 428
NiBufIClose: clear extension for hdl 18
dp_tm_adm[19].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1408859932/146000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 19
DpListRemove: remove elem 19 from tmadm_inuse_list
DpListRemove: 19 elems in tmadm_inuse_list
DpListInsert: insert elem 19 into tmadm_free_list (at begin)
DpListInsert: 182 elems in tmadm_free_list
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
*** ERROR => [DpProcDied] Process died (PID:1192 HANDLE:1124 rc:0x1) [dpnttool2.c 147]
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:53 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:54 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:55 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:56 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:57 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:58 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:28:59 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4164 HANDLE:1132)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Aug 24 11:29:00 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:4164 HANDLE:1132 rc:0x0) [dpnttool2.c 147]
DpHalt: not attached to the message server
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4508) [dpxxdisp.c 11252]
DpHalt: Good Bye .....I have a feeling you might have better luck posting this in the BASIS forum and not ABAP.
-
Hi Everyone,
I was trying to install NW 2004's(ABAP+JAVA,BI,EP,EP Core),getting following error,eventhough VM settings changed to 1024(total 4GB).
Error is :
CJS-30150 Java processes of instance ECC/DVEBMGS04 [ABAP: ACTIVE, Java: UNKNOWN] did not reach state PARTRUNNING after 20:00 minutes. Giving up.
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
Please do needful.
Thanks,
NarenMy Solution:
OS: Win2003 Std Edition
DB: Oracle 10g
SAP: SolMgr 4 SR3
1. Set VM to 4096.
2. In Services, make sure Oracle listener starts automatically
3. Stop the installation and SAP instances.
4. Restart the server
5. Check that oracle listener is running
6. Start SAP from the SAPmmc Console and wait till all processes are green. Java process will take a while to complete. I waited about 4-5 mins for it to turn from yellow to green
7. Rerun the installation
From the above steps, I managed to resolve this problem. -
CJS-30152 Java process dispatcher of instance RP8/DVEBMGS01 [ABAP: ACTIVE
We are installing an SAP system with HA option.
System Info :-
OS : RHEL5
Database : Oracle
SID : RP8
physical host: cipocvm
virtual host : ciRP8
While installing CI ,ABAP+JAVA
ABAP Started but JAVA Instance stopped starting in phase "Prepare to install minimal configuration".
Error as below:
ERROR 2012-01-03 20:20:27.346
CJSlibModule::writeError_impl()
CJS-30152 Java process dispatcher of instance RP8/DVEBMGS01 [ABAP: ACTIVE, Java: (dispatcher: UNKNOWN, server0: UNKNOWN)] did not reach state STARTING_APPS after 20:00 minutes. Giving up.
logs:
Idx
Name
PID
State
Error
Restart
0
dispatcher
0
Stopped
4
no
1
server0
0
Stopped
4
no
2
SDM
24424
Running
0
yes
defaultTrace.0.trc -
>
om.sap.engine.core.service630.container.ServiceStopper#######SAPEngine_System_Thread[impl:5]_71##0#0#Error##Plain###Service webdynpro error com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to access Web Dynpro container. during shutdown.#
#1.#525400C50A02003500000003000030590004B59E6928B0AE#1325591880577#com.sap.engine.core.service630.container.ServiceStopper##com.sap.engine.core.service630.container.ServiceStopper.ServiceStopper.run#######SAPEngine_System_Thread[impl:5]_71##0#0#Error#1#/System/Server#Plain###Failed to access Web Dynpro container.#
#1.#525400C50A02003500000004000030590004B59E6928B0FB#1325591880577#com.sap.engine.core.service630.container.ServiceStopper##com.sap.engine.core.service630.container.ServiceStopper.ServiceStopper.run#######SAPEngine_System_Thread[impl:5]_71##0#0#Error##Plain###com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to access Web Dynpro container.#
#1.#525400C50A02003500000005000030590004B59E6928B146#1325591880577#com.sap.engine.core.service630.container.ServiceStopper##com.sap.engine.core.service630.container.ServiceStopper.ServiceStopper.run#######SAPEngine_System_Thread[impl:5]_71##0#0#Error##Plain###com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to access Web Dynpro container.
at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DOContainerHook.stop(DOContainerHook.java:76)
at com.sap.engine.services.webdynpro.WebDynproFrame.stopInternal(WebDynproFrame.java:218)
at com.sap.engine.services.webdynpro.WebDynproFrame.stop(WebDynproFrame.java:202)
at com.sap.engine.core.service630.container.ServiceStopper.run(ServiceStopper.java:31)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: java.lang.NullPointerException: while trying to invoke the method com.sap.tc.webdynpro.spi.IWebDynproRuntimeService.removeDOStateListener(com.sap.tc.webdynpro.spi.IDOStateListener) of an object returned from com.sap.tc.webdynpro.serverimpl.wdc.ContainerUtils.getWebDynproRuntimeService()
at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DOContainerHook.stop(DOContainerHook.java:73)
... 6 more
#1.#525400C50A0200730000004D000030590004B59E69406FC0#1325591882133#com.sap.engine.core.thread.impl5.ThreadManagerImpl##com.sap.engine.core.thread.impl5.ThreadManagerImpl#J2EE_GUEST#0#####Thread[Thread-88,5,main]##0#0#Error##Plain###Unexpected thread activity after interrupt() is executed in shutdown of SAPEngine_System_Thread[impl:5]_ThreadManager:
Thread[SAPEngine_System_Thread[impl:5]_50]
Task: com.sap.engine.core.thread.impl5.ActionObject - Processing Task [classname: com.sap.jms.client.connection.AsyncCloser | toString: com.sap.jms.client.connection.AsyncCloser@38134991] with classloader [[email protected]04dae@common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore]#
#1.#525400C50A0200730000004E000030590004B59E694070DF#1325591882133#com.sap.engine.core.thread.impl5.ThreadManagerImpl##com.sap.engine.core.thread.impl5.ThreadManagerImpl#J2EE_GUEST#0#####Thread[Thread-88,5,main]##0#0#Error##Plain###Unexpected thread activity after interrupt() is executed in shutdown of SAPEngine_System_Thread[impl:5]_ThreadManager:
Thread[SAPEngine_System_Thread[impl:5]_58]
Task: com.sap.engine.core.thread.impl5.ActionObject - Processing Task [classname: com.sap.engine.services.log_configurator.archive.ArchivingThread | toString: [email protected]7a42eb59] with classloader [[email protected]6e4c@service:log_configurator]#
=======================================
server.0.log -
>
#1.#525400C50A02007300000047000030590004B59E6935A059#1325591881424#/System/Server##com.sap.engine.core.service630.container.MemoryContainer#J2EE_GUEST#0#####Thread[Thread-88,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service log_configurator stopped. (0 ms)#
#1.#525400C50A02007300000048000030590004B59E6935A4CB#1325591881426#/System/Server##com.sap.engine.core.service630.container.MemoryContainer#J2EE_GUEST#0#####Thread[Thread-88,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service jmx_notification stopped. (0 ms)#
#1.#525400C50A02007300000049000030590004B59E6935A708#1325591881426#/System/Server##com.sap.engine.core.service630.container.MemoryContainer#J2EE_GUEST#0#####Thread[Thread-88,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service runtimeinfo stopped. (0 ms)#
#1.#525400C50A0200730000004A000030590004B59E6938A570#1325591881622#/System/Server##com.sap.engine.core.configuration#J2EE_GUEST#0#####Thread[Thread-88,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Java### stopped successfully#1#ConfigurationManager#
#1.#525400C50A0200730000004B000030590004B59E6938A94D#1325591881623#/System/Server##com.sap.engine.core.locking.AbstractLockingManagerImpl.removeAllLokcsForClusterIdLogException(clusterId)#J2EE_GUEST#0#####Thread[Thread-88,5,main]##0#0#Info#1#com.sap.engine.core.locking.AbstractLockingManagerImpl#Java###All locks for cluster-element removed successfully#1#18989150#
#1.#525400C50A0200730000004C000030590004B59E6938A9CE#1325591881623#/System/Server##com.sap.engine.core.locking.AbstractLockingManagerImpl.shutDown(properties)#J2EE_GUEST#0#####Thread[Thread-88,5,main]##0#0#Info#1#com.sap.engine.core.locking.AbstractLockingManagerImpl#Java### stopped successfully#1#LockingManager#
#1.#525400C50A02007700000000000030590004B59E6938ABA6#1325591881624#/System/Server##com.sap.engine.core.cluster.impl6.ms.MSListenerQueue.run()#######SAP J2EE Engine|MS Queue Listener##0#0#Info#1#com.sap.engine.core.cluster.impl6.ms.MSListenerQueue#Plain###MSLib: Received error command to stop listener queue.#
#1.#525400C50A0200730000004F000030590004B59E69451A50#1325591882439#/System/Server##com.sap.engine.core.thread.impl3.ThreadManagerImpl#J2EE_GUEST#0#####Thread[Thread-88,5,main]##0#0#Info#1#com.sap.engine.core.thread.impl3.ThreadManagerImpl#Plain###ThreadManager stopped.#
==============================
security.0.log -
>
{(java.lang.RuntimePermission queuePrintJob)(java.lang.RuntimePermission stopThread)(java.lang.RuntimePermission loadLibrary)}
{(java.net.SocketPermission * connect,resolve)(java.net.SocketPermission localhost:1024- listen,resolve)}
{(java.io.FilePermission * read,write)}
{(java.util.PropertyPermission java.specification.vendor read)(java.util.PropertyPermission java.specification.version read)(java.util.PropertyPermission java.vm.specification.name read)(java.util.PropertyPermission java.vendor read)(java.util.PropertyPermission file.separator read)(java.util.PropertyPermission java.version read)(java.util.PropertyPermission java.class.version read)(java.util.PropertyPermission os.arch read)(java.util.PropertyPermission os.version read)(java.util.PropertyPermission java.specification.name read)(java.util.PropertyPermission path.separator read)(java.util.PropertyPermission java.vm.vendor read)(java.util.PropertyPermission os.name read)(java.util.PropertyPermission * read)(java.util.PropertyPermission java.vm.name read)(java.util.PropertyPermission java.vendor.url read)(java.util.PropertyPermission java.vm.specification.vendor read)(java.util.PropertyPermission java.vm.version read)(java.util.PropertyPermission java.vm.specification.version read)(java.util.PropertyPermission line.separator read)}
#1.#525400C50A02002E00000003000030590004B59E6902C1C0#1325591878091#/System/Security/VSI##com.sap.security.core.server.vsi.service.VSIServiceFrame.stop()####n/a##2d9cc9b0360211e1975e525400c50a02#SAPEngine_System_Thread[impl:5]_34##0#0#Info#1#com.sap.security.core.server.vsi.service.VSIServiceFrame#Java###"Virus Scan Provider" service stopped.##
#1.#525400C50A02000800000001000030590004B59E69356481#1325591881409#/System/Security##com.sap.engine.services.userstore#######SAPEngine_System_Thread[impl:5]_70##0#0#Info#1#com.sap.engine.services.userstore#Plain###Service userstore stopped OK#
I may please be guided.
Kindest Regards
SAP BASISHello Sonia,
Can you ask your network team to monitor the traffic between primary and virtual host when you try to start java i.e STARTING_APP as it tries for 20mins and stopped.
I had the similar issue but with App server.Its almost the similar condition.Our network team managed to open some ports and removed the firewall.
After that issue got resolved..
Hope it helps
Regards,
Amit Barnawal -
CJS-30151 Java process server0 of instance RP8/DVEBMGS01 [ABAP: ACTIVE, Ja
Dear Experts
There are two server nodes with physical hostname as
dbpocvm and cipocvm and virtual hostame as dbRP8 and ciRP8 respectively.
We have successfully installed the SCS00 on ciRP8 and DB on dbRP8.
Now we are running CI installation on ciRP8 where 26 out of 29 steps
are completed and stuck on 27th step(Prepare to install minimal
configuration).
CJS-30151 Java process server0 of instance RP8/DVEBMGS01 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 1:00 minutes. Giving up.
ERROR 2012-01-05 15:50:09.815 [sixxcstepexecute.cpp:977]
FCO-00011 The step startJava with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|17|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|startJava was executed with status ERROR ( Last error reported by the step :Java process server0 of instance RP8/DVEBMGS01 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 1:00 minutes. Giving up.).
WARNING 2012-01-05 15:50:09.846 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2012-01-05 15:50:09.846 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
few logs -
dev_jcontrol ,dev_server0 same logs found in both. No errors only warning
trc file: "/usr/sap/RP8/DVEBMGS01/work/dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 25393
system name : RP8
system nr. : 01
started at : Thu Jan 5 15:49:10 2012
arguments :
arg[00] : jcontrol
arg[01] : pf=/usr/sap/RP8/SYS/profile/RP8_DVEBMGS01_ciRP8
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=65000
arg[04] : -DSAPSYSTEM=01
arg[05] : -DSAPSYSTEMNAME=RP8
arg[06] : -DSAPMYNAME=ciRP8_RP8_01
arg[07] : -DSAPPROFILE=/usr/sap/RP8/SYS/profile/RP8_DVEBMGS01_ciRP8
arg[08] : -DFRFC_FALLBACK=ON
arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 47042096819792] Thu Jan 5 15:49:10 2012
[Thr 47042096819792] *** WARNING => INFO: Unknown property [instance.box.number=RP8DVEBMGS01cirp8] [jstartxx_mt. 841]
[Thr 47042096819792] *** WARNING => INFO: Unknown property [instance.en.host=ciRP8] [jstartxx_mt. 841]
[Thr 47042096819792] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx_mt. 841]
[Thr 47042096819792] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx_mt. 841]
[Thr 47042096819792] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx512m [jstartxx_mt. 2604]
[Thr 47042096819792] [Node: server0] java home is set by profile parameter
Java Home: /usr/sapjvm_4
sapinst.log
WARNING 2012-01-05 15:48:22.138
80 Host name has been overridden. Using host name 'ciRP8' which might not be the real host name.
WARNING 2012-01-05 15:48:28.874
116 Connect to message server (ciRP8/3900) failed: NIECONN_REFUSED.
INFO 2012-01-05 15:49:07.066
189 Starting instance RP8/DVEBMGS01...
190
191 WARNING 2012-01-05 15:49:07.107
192 Connect to message server (ciRP8/3901) failed: NIECONN_REFUSED.
193331 ERROR 2012-01-05 15:50:09.756
332 CJS-30151 Java process server0 of instance RP8/DVEBMGS01 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN )] did not start after 1:00 minutes. Giving up.
more /etc/hosts
127.0.0.1 localhost.localdomain localhost loopback
10.10.6.92 ciRP8 cirp8
10.10.6.91 dbRP8 dbrp8
10.10.6.95 cipocvm
10.10.6.94 dbpocvm
10.10.6.73 poc-node1
10.10.6.82 poc-node2
::1 localhost6.localdomain6 localhost6
10.10.5.50 dsview3.dsview3.itc.com dsview3
I may please be guided
Kindest RegardsHi Sunny,
You are correct,but we have a different strategy.
We will have CI as SPOF and no CI with DI as non SPOF on two nodes.
CI will be a part of cluster in compensation to the CI and DI as non-clustered on seperate nodes.
I am yet stuck on 27 th phase of CI installation.
I do not think that can be a cause of the error as we have gone through the phase of installing /confguring Java Engine and installing S/WUnits prior to this 27 th phasei.e "Prepeare to install minimal configuration" .
Anyways CI can always be a part of cluster as and HA option too.
Thanks for your reply.
Any futher suggestions is appreciated.
Thanks -
Failed ABAP process in process chain does not trigger subsequent process
Hello,
I have a issue in my process chain with the abap process type.
When this abap process gets failed due to some reason; it is not trigerring subsequent step in the chain.
Any ideas on how it can be solved or any work-around?
I searched the forum and got to know that we can create a copy of abap process type, and can change possible events to
"success or fail".
Please let me know your views on it or if someone has ever encountered similar issue.
Thanks alot for your help,
AnujHi Anuj,
My guess is that you have your the link between the ABAP process type and the subsequent step to trigger on success. You can check this, Go to RSPC -> process chain and check the design. If the link has a green light on it, then it will trigger only on success of the abap process. You need to check with your design and confirm whether this need to be like this, (maybe the abap process is doing something which is required for the subsequent loads??)
If no then you can change the link type to either success of failure and activate the chain. This would resolve your problem.
If you cant change your chain, then i would suggest you correct the failure and then use the program RSPC_PROCESS_FINISH to push the chain further. Just search for this on the forums, there are plenty of blogs/threads on this.
Regards. -
LR1.3 Export post processing command did not work
Exported jpegs to folder on desktop. Everything worked nicely except the command in the Post-processing box to open files in PSCS3 did not execute. Any comments or explanations? Thanks in advance for your help.
Scottscottbjones wrote:
> Exported jpegs to folder on desktop. Everything worked nicely except the
> command in the Post-processing box to open files in PSCS3 did not
> execute. Any comments or explanations? Thanks in advance for your help.
In most cases the length of the command line exceeds the maximum length.
Try using a very short output directory name like C:\Out. Note that this
applies to Windows, I'm not sure how this works on a Mac.
Kees de Bruin
"A vacation is having nothing to do and all day to do it in" -
Time out parameters for ABAP and JAVA instance
Hello All,
We are looking for Time out parameters for our ABAP and JAVA instances.
As users are complaining that they are getting time out error
while they are trying to access Cprojects from Portal.
I was able to check/collect the ABAP instance parameters from SMICM Tcode.
Can anybody tell me which parameters we need to look for JAVA instance.
Thanks in advance.
Regards,
Amber Sjstart/shutdownTimeout
(jstartup/shutdown_timeout)
Specifies the shutdown timeout, i.e. the grace period for the AS Java instance to shut down before the Java process terminates itself. Unt is in Seconds. Default is 120
j2ee/ms/connectTimeout
(jstartup/wait_for_scs)
Specifies the timeout for the first connection to the message server. The AS Java instance fails to start if this timeout expires.Unt is in Seconds.Default is 60
j2ee/ms/reconnectTimeout
(jstartup/wait_for_reconnect)
Specifies the timeout for the reconnecting to the message server.The AS Java instance shuts down when this timeout expires.Unt is inSeconds.Default is 3600 (one hour)
Thanks -
ABAP process hangs when calling a jCO Server J2EE-available RFC
Hi there
Here's the scenario:
We have deployed a jCO server under the SAP WAS. This jCO server implements two functions. They are both called from ABAP process through RFC. We are using the same RFC destination for both
First function is defined with import/export parameters and the second one only operates with a TABLE parameter.
Incidentally, these functions are captured by the jCO server, which calls an IBM MQ server
First function works fine. Second function hangs and there is not even a timeout so the ABAP process (run on foreground) can stay forever.
The interesting part is that the same application works really fine when called from a Tomcat using a standalon instance of the jCO.
Additional info:
We have noticed that some time after the second function gets called, there are five dumps on the system (the same amount of servers we make available). These are CALL_FUNCTION_SIGNON_REJECTED.
The fun part of the dumps is that the user making the RFC call is a different user that the one we use for the jCO connection, and the client number is '000', instead of the '728' we are using for the connection. Somehow they seem related but we do not know how yet:
Short text
You are not authorized to logon to the target system (error code 1).
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPMSSY1" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
RFC (Remote Function Call) sent with invalid
user ID "%_LOG01% " or client 000.
User "ARINSO " under client 001 from system "SMD " has tried to carry out an
RFC
call under the user ID "%_LOG01% " and client 000 (Note: For releases < 4.0,
the
information on caller and caller system do not exist.).
Call Program........."SAPLSMSY_ACTUALIZE_DATA"
Function Module..... "SCSM_SYSTEM_LIST"
Call Destination.... "SM_ET7CLNT000_READ"
Source Server....... "sapwasmd_SMD_10"
Source IP Address... "172.17.82.80"
Termination occurred in the ABAP program "SAPMSSY1" - in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 67
of the (Include) program "SAPMSSY1".
Any tip or suggestion on where to look at is more than welcome
Thanks in advance,
MiguelAnd this is the content of the defaultTrace.0.trc log from the WAS
1.#005056AB04C500440000000200002B0000046B495CA1AF67#1243862737727#com.sap.caf.um.relgrou
ps.imp.principals.RelGroupFactory##com.sap.caf.um.relgroups.imp.principals.RelGroupFactor
y.RelGroupFactory()#######SAPEngine_System_Thread[impl:5]_13##0#0#Info#1#/System/Server#P
lain###sap.com caf/um/relgroups/imp MAIN_NW701P03_C 2846629#
#1.#005056AB04C500240000000100002B0000046B495CCDAAFB#1243862740608#com.sap.engine.library
.monitor.mapping.ccms.Trace##com.sap.engine.library.monitor.mapping.ccms.Trace####n/a##b3
89a8004eaf11dec9b7005056ab04c5#SAPEngine_System_Thread[impl:5]_39##0#0#Error##Plain###Reg
isterNode</Kernel/System Threads Pool/WaitingTasksCount>: com.sap.engine.library.monitor.
mapping.ccms.CcmsConnectorException: 2100850: Invalid configuration group for node'/Kerne
l/System Threads Pool/WaitingTasksCount' (MANAGERS.SThreadPool.WaitingInRequestQueueCount
, max. 40 characters)#
#1.#005056AB04C500240000000200002B0000046B495CCDB4CC#1243862740612#com.sap.engine.library
.monitor.mapping.ccms.Trace##com.sap.engine.library.monitor.mapping.ccms.Trace####n/a##b3
89a8004eaf11dec9b7005056ab04c5#SAPEngine_System_Thread[impl:5]_39##0#0#Error##Plain###Reg
isterNode</Kernel/System Threads Pool/WaitingTasksQueueOverflow>: com.sap.engine.library.
monitor.mapping.ccms.CcmsConnectorException: 2100850: Invalid configuration group for nod
e'/Kernel/System Threads Pool/WaitingTasksQueueOverflow' (MANAGERS.SThreadPool.Waiting4Fr
eeReqQueueSlotCount, max. 40 characters)#
#1.#005056AB04C500240000000300002B0000046B495CCDCDA1#1243862740618#com.sap.engine.library
.monitor.mapping.ccms.Trace##com.sap.engine.library.monitor.mapping.ccms.Trace####n/a##b3
89a8004eaf11dec9b7005056ab04c5#SAPEngine_System_Thread[impl:5]_39##0#0#Error##Plain###Reg
isterNode</Kernel/Application Threads Pool/WaitingTasksCount>: com.sap.engine.library.mon
itor.mapping.ccms.CcmsConnectorException: 2100850: Invalid configuration group for node'/
Kernel/Application Threads Pool/WaitingTasksCount' (MANAGERS.AThreadPool.WaitingInRequest
QueueCount, max. 40 characters)#
#1.#005056AB04C500240000000400002B0000046B495CCDD69B#1243862740620#com.sap.engine.library
.monitor.mapping.ccms.Trace##com.sap.engine.library.monitor.mapping.ccms.Trace####n/a##b3
89a8004eaf11dec9b7005056ab04c5#SAPEngine_System_Thread[impl:5]_39##0#0#Error##Plain###Reg
isterNode</Kernel/Application Threads Pool/WaitingTasksQueueOverflow>: com.sap.engine.lib
rary.monitor.mapping.ccms.CcmsConnectorException: 2100850: Invalid configuration group fo
r node'/Kernel/Application Threads Pool/WaitingTasksQueueOverflow' (MANAGERS.AThreadPool.
Waiting4FreeReqQueueSlotCount, max. 40 characters)#
#1.#005056AB04C500600000001600002B0000046B4960688301#1243862801089#com.sap.slm.exec.messa
ge.SLMApplication#sap.com/tcslmslmapp#com.sap.slm.exec.message.SLMApplication#Guest#0##
n/a##c59827604eaf11de9fb3005056ab04c5#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##
Java###null##
#1.#005056AB04C500730000000000002B0000046B4CF0593ABD#1243878100908#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain###com.sap.mw.jco.JCO$AbapException: (126) 1: Array index out of rang
e: 48#
#1.#005056AB04C500730000000100002B0000046B4CF0594028#1243878100909#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.efh.jco.valtran.sap.ValtranRequestHandler.serverExceptionO
ccurred(ValtranRequestHandler.java:164)#
#1.#005056AB04C500730000000200002B0000046B4CF059406B#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.sap.mw.jco.JCO.fireServerExceptionOccurred(JCO.java:880)#
#1.#005056AB04C500730000000300002B0000046B4CF05940A3#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.sap.mw.jco.JCO$Server.listen(JCO.java:8187)#
#1.#005056AB04C500730000000400002B0000046B4CF05940DB#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.sap.mw.jco.JCO$Server.work(JCO.java:8303)#
#1.#005056AB04C500730000000500002B0000046B4CF0594111#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.sap.mw.jco.JCO$Server.loop(JCO.java:8250)#
#1.#005056AB04C500730000000600002B0000046B4CF0594143#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.sap.mw.jco.JCO$Server.run(JCO.java:8166)#
#1.#005056AB04C500730000000700002B0000046B4CF05941F0#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at java.lang.Thread.run(Thread.java:770)# -
Instance DVEBMGS00 for system NSP not configured
Hi,
I installed the Sneak Preview ABAP Stack on my system.It runs great and donot have any problems(till now)
But when i did Profile check using RZ10 I am finding the following message
"Instance DVEBMGS00 for system NSP not configured" in START Profile check.
Can some one tell me in configuring the same ??
Thanks
SreeniI have the exact same problem, but with the minisap 4.6:
"Instance D00 for system MBS not configured ".
Have someone had the same problem ? Please help !
Message was edited by: Youssef ANEGAY -
Email Alert for Process Chain for ABAP Process Type
Hi BW Experts,
I created a process chain based on ABAP Process Type ( for Broadcasting rsrd_broadcast_starter). I want to add alert message for each ABAP process if it is failed. But I cant see any option showing Successfull or Error or Always when I select create message option on the process type. How ever I can see for other process chain which is loading data (Process Type is Info Package ) from SAP into BW.
Please some one tell me why it is not showing alert message for ABAP Process Type.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Jul 13, 2009 10:16 PMI dont have the exact answer for your question, But as a work around i can suggest you that.
If these ABAP programs are included in a chain and this local chain is a part of meta chain then you can create a message on the local chain.By right clicking on the local chain >Create Message>Success
--->Failure
>Always
Hope this resolves the problem tempervorly.I will get back to you once i have
Or the permanent solution is
Its big and also easy method to perform, by this you will be able to get all the options for a ABAP Program also.If you have any questions please let me know.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/creating%20an%20abap%20process%20type%20for%20process%20chains%20in%20bi.pdf -
How to reset an failed asynchron abap-process in a process-chain?
Hi specialists,
I've got a process-chain which triggers (as one of its steps) an abap-program.
The program should run asychroniously, so the process-chain waits until the programm reports its ending.
When the abap-program fails/crashes/dumps, then the endings is never reported and the process-chain gets stuck.
If I try to re-run that process-chain, it fails again with the message "Variant XYZ still executing from previous run".
What I already found so far is the following note:
The process chain management will not know if your program terminates!
Thus if you re-start the chain, this will also terminate, because the old run would not have finished yet. To avoid this, you need to manually set the process in the chain log view in the process monitor to terminate before you start again.
My problem: I cannot find any possibility to set the process to "terminate" in the chain's log view.
Could you please gimme a hint where I can find that option?
Best regards,
MarcoHi,
You can remove the process chain from scheduling before staring the process chain again.
Also can edit the entries in RSPROCESSLOG table before running the process chain.
Alternatively you can create a custom ABAP process type which handles the success as well as fail cases.
Refer : [How To- Trigger subsequent processes in a Process Chain based on the Success or Failure of ABAP program|/people/balaji.venugopal/blog/2009/04/07/how-to-trigger-subsequent-processes-in-a-process-chain-based-on-the-success-or-failure-of-abap-program]
Hope this helps,
Regards,
anil -
ABAP process job ( BI_PROCESS_ABAP ) in process chain running for long time
Dear Experts,
We have an ABAP process job BI_PROCESS_ABAP in a process chain. This job is running for a very long time than previous run time.
Recently we had an ORACLE database upgrade from 9.2 to 10g.
From the very next day , we are having this problem.
And also previously this process-chain was under control of BASIS guys . they were using a tool called CRONACLE to schedule it. At the time of upgrade this tool was crashed and they asked us to schedule it in BW system instead.
Underlying program is using two custom tables.
one is having both primary & secondary indexes but the other table is having only primary index.
I am not sure whether we have secondary indexes on other table prior to upgrade or not.
Where must be the problem?...
At the time of upgrade BASIS has re-organized the table space along with database upgrade.
please help me...
Regards,
SRIKANTHPlease ask yr basis consultant to check the system parms.
Below i have listed down SAP recommneded system parms .
abap/heap_area_total 4000000000
abap/heap_area_dia 2000000000
abap/heap_area_nondia 2000000000
Also check in SM37 if any other jobs are running for long time, peventing the your job running.
Check the SM12 for locks or SM58 -
Kernel Change on ABAP+JAVA Dialog instances
Hi guys (& girls).
Another question from me.
I installed two Dialog instances for an ABAP+JAVA System (BI 7). The Central instance is on AIX, the DIs are running on SLES / x86_64.
Now i want to change the kernel.
It's fully automated for the Centeral Instance - i do it with the JSPM. Is there also an automated possibiltiy for changing the kernel on the DI? Or do i have to do it manually?
There is no extra JSPM on the DIs. How do you do that????
Thanks for your help,
MartinHi,
the above link does only describe Java only systems
For my distributed environments, I have setup a global NFS share which looks like:
kernel
\_ 640_EX2_UC
| \_ linuxx86_64
| | \_ current -> ./PL145
| | \_ PL111
| | | \_ disp+work
| | | \_ ... [all other files]
| | \_ PL145
| | \_ ...
| \_ aix
| \_ current -> ./PL145
| \_ PL111
| \_ ...
| ...
\_ 700_NUC
The instances are linked against the current link, which points to the right kernel folder. I setup a script with copies my latest downloads to these folder structure by creating a new PLXXX folder. Then, when it is time, the "current" link is set to the new "PLXXX" folder. Thats all
Thanks,
Hannes -
Hi gurus,
I've raised couple of SRs with Oracle and did not got appropriate response. So I think there are a lot of g8 minds also working here.
Requirement:
I need to reterive the payload in the xml format and store in a db table for certain process.
Steps followed:
Created a soa process which accepts the InstanceId and ECID as input and provides them to a java class using Java embed activity. The class that accepts that input and connect to getCompositeInstances() using a locator class. In this process it will make use of another two classes to convert the instance payload to dom and then to display. The mainclass uses the XMLUtil and XPathUtils classes for this requirement.
When I ran the three classes then I'm able to get the payload, but when called using the Javaembed I'm running into trouble. I'm getting a null value, not even any exception. I tried removing the catch in all the classes but no luck. Please find the below code in the Java embed and the java classes also.
Code in Java Embed:
try
setCompositeInstanceTitle("Composite HelloWorld123");
String ecid =(String) getVariableData("Input_java_ecid");
String compInstanceId =(String) getVariableData("Input_Java_instanceid");
addAuditTrailEntry("Payload_ecid is: " + ecid);
addAuditTrailEntry("Payload_insta is: " + compInstanceId);
Blob2String.MainClass mc = new Blob2String.MainClass();
String inputPayload = mc.getCompositeInstancePayload(compInstanceId, ecid);
if(inputPayload == null)
addAuditTrailEntry("inputPayload is*********"inputPayload".........");
InsertIntoDB ir = new InsertIntoDB();
ir.InsertMethod1(inputPayload,compInstanceId,ecid) ;
/*//addAuditTrailEntry("Payload is: " + inputPayload);
String StringPayload =(String)inputPayload;
addAuditTrailEntry("StringPayload is: " + StringPayload);
setVariableData("Java_Payload", StringPayload); */
catch(Exception e)
addAuditTrailEntry("Exception is: " + e);
e.printStackTrace();
Code in MainClass:
package Blob2String;
import java.util.*;
import javax.naming.Context;
import oracle.soa.management.facade.ComponentInstance;
import oracle.soa.management.facade.CompositeInstance;
import oracle.soa.management.facade.Locator;
import oracle.soa.management.facade.LocatorFactory;
import org.w3c.dom.*;
import oracle.soa.management.util.*;
import oracle.fabric.common.*;
import oracle.fabric.logging.*;
import oracle.fabric.logging.BaseMessageBundle;
public class MainClass {
/* public MainClass() {
super();
public String getCompositeInstancePayload(String compInstanceId,String ecid)
String compositeName="GetOpenCompositeInstances";
Hashtable jndiProps = new Hashtable();
String inputPayload="";
try
jndiProps.put(Context.PROVIDER_URL,"t3://abc.xyz.com:9102/soa-infra");
jndiProps.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory");
jndiProps.put(Context.SECURITY_PRINCIPAL,"weblogic");
jndiProps.put(Context.SECURITY_CREDENTIALS,"welcome123");
jndiProps.put("dedicated.connection","true");
Locator locator = LocatorFactory.createLocator(jndiProps);
CompositeInstanceFilter filter = new CompositeInstanceFilter();
filter.setECID(ecid);//Set the composite ECID
filter.setId(compInstanceId);//Set the composite instance id
List<CompositeInstance> compositeInstance = locator.getCompositeInstances(filter);
ComponentInstanceFilter instanceFilter = new ComponentInstanceFilter();
instanceFilter.setCompositeInstanceId (compInstanceId); //Set the composite instance id
List<ComponentInstance> componentInstance = compositeInstance.get(0).getChildComponentInstances(instanceFilter);
if (compositeInstance.size() > 0) {
Document docAudit = XMLUtil.convertToDOM(componentInstance.get(0).getAuditTrail().toString());
String payloadAudit = XPathUtils.executeXPath(docAudit, "//details").toString();
Document docPayload = XMLUtil.convertToDOM(payloadAudit);
Node payloadNode = XPathUtils.executeXPath(docPayload, "//part//*", "NODE");
inputPayload = XMLUtil.nodeToString(payloadNode);
//System.out.println(inputPayload);
catch(Exception e){
// e.printStackTrace();
System.out.println(e);
return inputPayload;
public static void main(String[] args){
MainClass Obj = new MainClass();
String result=Obj.getCompositeInstancePayload("60004" , "d90df5a0fd2bc5c7:4d37316b:13da0ebcf67:-8000-00000000000003ca") ;
//String result=Obj.getCompositeInstancePayload("16952862" , "ef14bd96767c0e08:-152cfeeb:13d2379cff3:-8000-000000000008c968") ;
// System.out.println(result);
Code in XMLUtil:
package Blob2String;
import org.xml.sax.InputSource;
import java.io.*;
import javax.xml.parsers.*;
import javax.xml.transform.*;
import javax.xml.transform.*;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.*;
import org.xml.sax.InputSource;
import oracle.fabric.logging.*;
public class XMLUtil {
* @param inputXML
* @return
* @throws Exception
public static Document convertToDOM(String inputXML) throws Exception {
Document dom = null;
try {
DocumentBuilderFactory factory =
DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
//DocumentBuilder builder = new org.apache.xerces.jaxp.DocumentBuilderFactoryImpl().newDocumentBuilder();
InputSource is = new InputSource(new StringReader(inputXML));
dom = builder.parse(is);
} catch (Exception ex) {
throw ex;
return dom;
public static String nodeToString(Node node) throws Exception{
StringWriter sw = new StringWriter();
try {
Transformer t = new org.apache.xalan.processor.TransformerFactoryImpl().newTransformer();
t.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "yes");
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.transform(new DOMSource(node), new StreamResult(sw));
} catch (TransformerException te) {
System.out.println("nodeToString Transformer Exception");
throw te;
return sw.toString();
Code in XPathUtils :
package Blob2String;
import javax.xml.xpath.*;
import org.w3c.dom.*;
import oracle.fabric.logging.*;
public class XPathUtils {
public static Object executeXPath(Document doc, String xpathStr) throws Exception{
XPath xpath = null;
String value = null;
try {
XPathFactory factory = XPathFactory.newInstance();
XPath xpath1= factory.newXPath();
//xpath = new org.apache.xpath.jaxp.XPathFactoryImpl().newXPath();
XPathExpression expr = xpath1.compile(xpathStr);
value = (String)expr.evaluate(doc, XPathConstants.STRING);
return value;
} catch (Exception e) {
throw e;
public static Node executeXPath(Document doc, String xpathStr,String type) throws Exception{
XPath xpath = null;
Node value = null;
try {
xpath = new org.apache.xpath.jaxp.XPathFactoryImpl().newXPath();
XPathExpression expr = xpath.compile(xpathStr);
value = (Node)expr.evaluate(doc, XPathConstants.NODE);
return value;
} catch (Exception e) {
throw e;
Its an urgent issue and I have the deadline to get on with. I've raised SR with oracle but there was no use. Kindly help me. Help will be greatly appreciated.
Thanks,
Venkatesh.Hi Venkatesh,
Just a way to debug.....can you use soa logger to debug your java MainClass() flow..
You can view log messages in
$ORACLE_HOME\user_projects\domains\soa_domain\servers\$soa_server\logs\$soa_server-diagnostic.log
Update your MainClass(to include log messages) as below..i believe it's going to exception block.
package Blob2String;
import java.util.*;
import javax.naming.Context;
import oracle.soa.management.facade.ComponentInstance;
import oracle.soa.management.facade.CompositeInstance;
import oracle.soa.management.facade.Locator;
import oracle.soa.management.facade.LocatorFactory;
import org.w3c.dom.*;
import oracle.soa.management.util.*;
import oracle.fabric.common.*;
import oracle.fabric.logging.*;
import oracle.fabric.logging.BaseMessageBundle;
import java.util.logging.Level;
import java.util.logging.Logger;
import oracle.fabric.logging.LogFormatter;
public class MainClass {
/* public MainClass() {
super();
public String getCompositeInstancePayload(String compInstanceId,String ecid)
Logger logger = Logger.getLogger("oracle.soa.Logger");
LogFormatter.configFormatter(logger);
logger.log(Level.INFO, "Testing... getComposite log message");
String compositeName="GetOpenCompositeInstances";
Hashtable jndiProps = new Hashtable();
String inputPayload="";
try
logger.log(Level.INFO,"Inside Try block");
jndiProps.put(Context.PROVIDER_URL,"t3://abc.xyz.com:9102/soa-infra");
jndiProps.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory");
jndiProps.put(Context.SECURITY_PRINCIPAL,"weblogic");
jndiProps.put(Context.SECURITY_CREDENTIALS,"welcome123");
jndiProps.put("dedicated.connection","true");
logger.log(Level.INFO,"Initializing locator");
Locator locator = LocatorFactory.createLocator(jndiProps);
logger.log(Level.INFO,"Locator Initailized");
CompositeInstanceFilter filter = new CompositeInstanceFilter();
filter.setECID(ecid);//Set the composite ECID
filter.setId(compInstanceId);//Set the composite instance id
logger.log(Level.INFO,"CompositeInstanceFilter initialized");
List<CompositeInstance> compositeInstance = locator.getCompositeInstances(filter);
ComponentInstanceFilter instanceFilter = new ComponentInstanceFilter();
instanceFilter.setCompositeInstanceId (compInstanceId); //Set the composite instance id
List<ComponentInstance> componentInstance = compositeInstance.get(0).getChildComponentInstances(instanceFilter);
logger.log(Level.INFO,"compositeInstance.size");
logger.log(Level.INFO,Integer.toString(compositeInstance.size()) );
if (compositeInstance.size() > 0) {
Document docAudit = XMLUtil.convertToDOM(componentInstance.get(0).getAuditTrail().toString());
String payloadAudit = XPathUtils.executeXPath(docAudit, "//details").toString();
Document docPayload = XMLUtil.convertToDOM(payloadAudit);
Node payloadNode = XPathUtils.executeXPath(docPayload, "//part//*", "NODE");
inputPayload = XMLUtil.nodeToString(payloadNode);
//System.out.println(inputPayload);
logger.log(Level.INFO,"Displaying payload");
logger.log(Level.INFO,inputPayload);
catch(Exception e){
// e.printStackTrace();
System.out.println(e);
logger.log(Level.INFO,"Inside Exception");
logger.log(Level.INFO,e.toString());
logger.log(Level.INFO,"Returniing payload");
logger.log(Level.INFO,inputPayload);
return inputPayload;
Thanks,
Faiz
Maybe you are looking for
-
Disk can not be read from or written to
This iPod nano second gen is brand new. Bought it today and I put like 10 songs and 10 photos on for my sister and now it's saying "disk can not be read from or written to" and now it's not showing up in iTunes or "My Computer". Help, please?
-
For a program I have to access a local disk as network drive. The path has to be the network path and not the local path (with the disk name) how can I do this?
-
Mavericks (10.9.1) crashes & freezing
Hi, 1 time for week my iMac (27 i5 2,9GHz, 8GB RAM, nVidia GeForce GTX 660M e Fusion Drive) FREEZE and i must RESTART !!! Here the log of today, from few minutes before the CRASH to the REBOOT: 30/01/14 12:14:55,094 icbaccountsd[3229]: -[ICBLocalDict
-
ICloud in the corporate environment
I work for a large financial institution and part of my job is to support the MAC environment. We are ordering new laptops and desktops, which now come with Lion. After configuring them with the standard network settings including DNS Search Domains
-
Hi friends i create one role CREATE ROLE UPDATE_ROLE; we have three schema(a,b,c) three schema depend to all three schema but unique objects . i create public synonym CREATE OR REPLACE PUBLIC SYNONYM CTL_RC_PROCESS FOR a.CTL_RC_PROCESS; CREATE OR REP