CJV4 Error while transfer Simulation to Operative

Hi Experts,
I have created SIM1 from an Operative project in CJV4
Then i modified the SIM1in project builder (included new objects: WBS, activity, component).
Then i attempted transfer SIM to Operative.
I experienced below error: Error u201CData cannot be saved Message no. CJ036u201D
Can I  have guidance here?
warm regards
ramSiva

ramSiva,
As fas as I know, it is not necessary at all to maintain forecast dates before transfering from sim to operative.
As per your reply I understand that no forecast dates were maintained in the operative project before transfering to sim and that no forecast dates are maintained in the sim before transfering back to operative. Is this so, isn´t it?
I cannot think of a reason why this may be happening.
Maybe ask OSS ???
Sorry for no better answer
Regards
Martina

Similar Messages

  • Error while transfer simulation version to operative.

    Hi Experts
    I tried to transfer a simulation to operative in CJV4.
    But i experienced the below message:
    Backward scheduling (enter finish date)
    Message no. CO028
    I could not find the reason, since all the the networks have start and finish dates, still i am unable to tranfer sim to operative.
    Please advise the action.
    Warm regards
    ramSiva

    ramSiva,
    As fas as I know, it is not necessary at all to maintain forecast dates before transfering from sim to operative.
    As per your reply I understand that no forecast dates were maintained in the operative project before transfering to sim and that no forecast dates are maintained in the sim before transfering back to operative. Is this so, isn´t it?
    I cannot think of a reason why this may be happening.
    Maybe ask OSS ???
    Sorry for no better answer
    Regards
    Martina

  • Error while creating PO in operation subcontracting

    I am getting an Error while creating PO in operation subcontracting.When I'm trying to convert the purchase requisition for the operation in the routing into a Purchase order it gives me the error "Not possible to determine any components".Please guide me why I am getting this error. I have already assigned the component to the operation in the routing. I also have this component in stock. But no Idea why I'm getting this error

    Hi  Sam,
    please check ,
    Assign a recursive BOM for the material for which you want to  create the purchase order .ie. create a BOM  of mat say X having a component  X and marking the indicator  recursive ticked.
    Please create the BOM  which is valid much before the date of creating a purchase requisition .
    And proceed for the creation of subcontract purchase requisition.
    Please Revert back, if the problem is solved.
    OMKAR

  • Error while consolidating. The operation could not be completed.

    Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
    Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
    What gives?

    I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
    I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

  • Error while creating model classes, operation aborted in NWDS

    Hi All,
    When i select Adaptive rfc 2 model  and then search for the RFC,  when i select RFC and click on next i get an error while importing :
    Error while creating model classes, operation aborted.
    It is working fine in visual composer and i have activated function module, RFC but getting same error. It is also working in web service navigator also.
    Can any one help me out??
    Regards,
    Pradeep kumar
    Edited by: pradeep_546 on Feb 17, 2011 9:35 PM
    Edited by: pradeep_546 on Feb 17, 2011 9:36 PM
    Edited by: pradeep_546 on Feb 17, 2011 9:37 PM

    Hai guys thanks for reply
    Tushar,
    I am using NWDS 7.2, ce7.2 server, ECC 6.0.
    Amit,
    I have tested the JCO destinations they are working fine and i created a new pair of JCO destinations but unable to import the Adaptive RFC2 Model gives same error but Adaptive webservices are working fine in my NWDS7.2
    Deepak,
    I am unable to create model in other projects also.
    I have sufficient amount of memory in my drive.
    I have imported the DC to other NWDS but it gives same error.
    Thanks for all,
    Regards,
    Pradeep Kumar G
    Edited by: pradeep_546 on Feb 18, 2011 3:05 PM

  • Error while Posting to all operative areas

    hi,
    while posting to all operative areas in TBB1 am getting the following error
    "No accounting rule despite posting to general ledger ERP" for valuation area 002. Whereas no error for operative valuation area 001.
    Please help.

    Hi Sur,
    the long text SAP note 922332 explains what to do in this case: is there an accounting principle assigned to all of the relevant valuation areas for the accounting code in IMG under  'Assign Accounting Codes and Valuation Areas'?
    Best regards,
    Marie
    SAP TRM

  • Error while transfer data from SNP

    Dears,
    Am facing the below error while trying to transfer the data from DP .(SAPAPO/MC90
    Thanks for the help

    Hi Vijesh
    You may start looking into the issue by checking whether all Product/Location mentioned in the seletion exists as CVC in MPOS. This should be followed by running a consistency checks through /SAPAPO/TS_LCM_CONS_CHECK. This previous post may be helpful - https://scn.sap.com/thread/654202.
    Thanks,
    Prasun

  • Error while invoking simulator

    Hi,
    <remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke: ; nested exception is:
         dynamic invocation error: javax.xml.soap.SOAPException: Error parsing envelope: (1, 1) Start of root element expected.; nested exception is:
         dynamic invocation error: javax.xml.soap.SOAPException: Error parsing envelope: (1, 1) Start of root element expected.</summary>
    </part><part name="detail"><detail>dynamic invocation error: javax.xml.soap.SOAPException: Error parsing envelope: (1, 1) Start of root element expected.</detail>
    </part></remoteFault>
    I have received the following error while trying to invoke the simulator which is created instead of http call API. But I can see the instance of the simulator as passed. Can anyone help with this issue?

    I hope the sun forum can help for me. Lets see

  • OBJECTS_NOT_FLATLIKE error while transfer data to a file .-

    Hi experts,
    I am getting a dump OBJECTS_NOT_FLATLIKE
    while transfer data from internal table to a file .. File contains basically bank transmitting data in SAP
    Appreciate your advise and help ...
    Thanks

    Hi,
    1. If your files are on a remote File System, you will need to copy one of your files to the machine ODI Designer is running on to allow ODI to retrieve the metadata information of the file.
    2. In Topology create a Physical Schema, the directory you enter for Data and Work Schema should point at this local file.
    3. Then define the File Datastore in ODI Designer. Enter a name, browse and select the file and fill in each filed of the Files tab.
    * If its a Fixed file, click on the grid icon on the Columns tab to enter the columns and have Automatic Adjustment checked.
    * If its a Delimited file, use the Reverse button on the Columns tab to reverse the columns.
    * Right click on the File Datastore select View Data, if you can view data, that means the File Datastore has been defined correctly.
    * If not, check each tab of the File Datastore to make sure everything is defined correctly and retry.
    4. Once View Data is successful, you now change the directories (Data and Work Schema in Topology) to point at the remote File System. These directories must be accessible to the ODI Agent that will be used to run the transformations. The directory can be an absolute path (m:/public/data/files) or relative to the ODI Agent startup directory (../demo/files). It is strongly advised to use a UNC (independent from the execution location) for the path. When running the transformations with "no agent", the directory is relative to the directory where Oracle Data Integrator has been installed.
    You need to have a agent process running at the system where your source file resides .
    Then while running the odi interface choose that agent .
    Thanks,
    Sutirtha

  • Discovery Failed: VNI-4026: Discovery failed: Error while transfer**URGENT*

    Hi Fellows,
    I had a server with one database only. It was discovered and running fine in OEM using Oracle Management Server. I created one more database in this server and created a service. Now I can see this database when I use OEM with stand alone option. But when I try OEM Oracle Management Server and I try to discover new database, it gives me the following error:
    Discovery Failed: VNI-4026: Discovery failed: Error while transferring services.ora
    I ping agent and it is okay. I checked the status of Listner which is fine too. If listner is not fine I should not be able to connect.
    Note: the database which I already had on the server is working absolutely fine.
    Any help will be highly appreciated.
    Thanks
    Ghulam Mustafa Butt

    Hi,
    I was out of office yesterday. Sorry for the link.
    Here is the content of that link:
    goal: How to confirm DNS hostname resolution
    fact: Generic Platform
    fix:
    1. Find the hostname of the box:
         % hostname
    2. Perform nslookup on hostname
         % nslookup <hostname>
         Type in the hostname exactly as it is displayed in step 1
         nslookup returns 4 or more lines of information in this format:
              Server: <hostname.domain of the dns server>
              Address: <ip address for the dns server>
              Name: <hostname.domain for this box>
              Address: <ip address for this box>
    3. Perform nslookup on host IP address
         % nslookup <ip addr>
         Use the ip address found on the 4th line in step 2
         Exactly the same lines of info as in step 2 should be returned
    4. Perform nslookup on host name of target system
         % nslookup <hostname>
         Exactly the same 4 lines should be returned as though nslookup were done on
    the other box
    5. Perform nslookup on IP address of target system
         % nslookup <ip addr>
         Exactly the same 4 lines should be returned as though nslookup were done on
    the other box
    NOTE ROLE:
    The Network Administrator is responsible for adding servers to DNS

  • Error while Transfer Object

    Hi,
    I have a Data-Transfer-Object which is transfered between a client and an EJB. While this transfer I get this exception:
    java.rmi.MarshalException: CORBA MARSHAL 1398079699 Maybe; nested exception is:
         org.omg.CORBA.MARSHAL: Unable to read value from underlying bridge : Mismatched serialization UIDs : Source (Rep. IDRMI:com.tsystems.ik.to.BANFTO:0000000000000000) = 0000000000000000 whereas Target (Rep. ID RMI:com.tsystems.ik.to.BANFTO:5F16928AAE9F82C6:70F941F18AA0F040) = 70F941F18AA0F040 vmcid: SUN minor code: 211 completed: Maybe
    Any ideas, where the error is?
    My DTO:
    import java.io.Serializable;
    public class BANFTO implements Serializable {
    private String number;
    private String name;
    public BANFTO (){}
    public String getName() {
    return name;
    public void setName(String name) {
    this.name = name;
    public String getNumber() {
    return number;
    public void setNumber(String number) {
    this.number = number;

    I had the same problem.
    I deleted automatically generated deployment and RMIC code, did a rebuild all projects, deployed on server, restarted server and it just worked out.

  • Error while running historical and operational reports in OIM 9.1

    Hi all,
    I had a look at the operational reports and historical reports in OIM 9.1
    When I tried to run the reports by supplying the parameters, I see the following behaviors.
    a)The reports run as expected and display the information.
    b)The moment, I click submit I see a series of exceptions in the Jboss log, the beginning of the thread being....
    WARN [TxConnectionManager] Connection error occured: org.jboss.resource.connectionmanager.TxConnectionManager$TxConnectionEventListener@1e7aa15[state=NORMAL mc=org.jboss.resource.adapter.jdbc.xa.XAManagedConnection@6fc757 handles=1 lastUse=1300177838234 permit=true trackByTx=true mcp=org.jboss.resource.connectionmanager.JBossManagedConnectionPool$OnePool@62b4a1 context=org.jboss.resource.connectionmanager.InternalManagedConnectionPool@40ba54 xaResource=org.jboss.resource.adapter.jdbc.xa.XAManagedConnection@6fc757 txSync=null]
    java.sql.SQLException: No more data to read from socket
    c)The screen just hangs without any error message/report results. When I tried to click any other menu items on the left hand side, none of them responds after the screen is hung.
    The only option available is to close the window and reopen the browser again.
    It would be great if you could let me know the root cause for scenarios 'b' and 'c'
    Looking forward to hearing from you,
    Many thanks in advance

    Hey guys! 2 days and no replies yet. please help me with this.

  • Error while invoking the commit operation in a data control

    JDeveloper 11.1.2
    When we invoke the commit operation exposed thru the data control, sometimes we get the following error:
    Caused by: java.lang.NullPointerException
    at oracle.jbo.server.DBTransactionImpl.addPendingEvent(DBTransactionImpl.java:5751)
    at oracle.jbo.server.DBTransactionImpl.sendOrQueueEventForSharedTrans(DBTransactionImpl.java:6659)
    at oracle.jbo.server.DBTransactionImpl.fireTransactionStateEvent(DBTransactionImpl.java:6693)
    at oracle.jbo.server.DBTransactionImpl.doAfterCommit(DBTransactionImpl.java:2301)
    at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2159)
    at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2352)
    This issue is intermittent but occurs many times.
    I am NOT able to find any issues with the code.
    Any pointers on resolving the issue.
    Thanks,
    Navaneeth

    My problem is special, we change the AM configuration to EJB (2.1 stateful, let's put performance issue aside) and deploy remotely, however, there's a NullPointerException occurred at the same line number as your case when we change the task flow id of the dynamic region, because the ADF framework always calls Rollback during region refresh, this Rollback cause the NullPointerException. Even if I caught and ignore this error, there will be always a NullPointerException thrown the next time we do any VO attribute update (kind of same as the blog entry described below).
    http://adfbugs.blogspot.com/2011/08/rollback-is-executed-when-region-is.html
    I am not sure if we could benefit from fixing of your SR by Oracle. Please share if you have any hints, thank you!
    Edited by: codeplay on Mar 30, 2012 9:42 AM

  • Error while exporting to PDF - Operation not yet implemented

    Hi,
        We using C# Dot Net 2005 and Crystal Report for Dot Net 2005 and we are trying to export to PDF file.  In one of the reports, we are using a Font "Shree-Kan-0850' from Shree Samhita, a SDK to build application in Indian regional languages. But we are getting an error as follows:-
    "Error in File C:\Document~1....\{....}-.rpt: Operation not yet implemented.". When we tried in various sites and forums found that it was due to some non-standard fonts. We have checked that if we remove Shree-Kan-0850 font from report, it works fine and once included the error comes. So problem might by from this font. Whether Crystal report is not supporting other than Windows standard fonts or the problem with PDF? Because with same font we can export to DOC, XLS etc. Please guide us how to solve this?
    Thanks and regards,
       Rajeev Vandakar, Bangalore.

    Unfortunately, it looks like that font has many issues. Googling 'Univers Condensed Fonts .net' gets a number of interesting posts. E.g.;
    Univers 67 Bold Condensed Font does not show in my Flash Fonts List
    See if you can select the font in the properties window of the VS.NET IDE.
    It would also be interesting to see if the following will work in a new test app:
    Private Sub Form1_Load(ByVal sender As System.Object,
    ByVal e As System.EventArgs) Handles MyBase.Load
         Label1.Font = New Font("Univers 57 Condensed Font – Univers 57 Condensed", 12, FontStyle.Regular)
    End Sub
    - Ludek

  • Error while transfer request from development to production server

    Hi,
    We have generated some request on development and while transer the same on production server, following error message appear "Transport control programe tp ended with error code 0247"
    Pl give us the solution.
    Regards
    Suresh

    hi
    repeat your transport run
    or re-create transport and execute again.

Maybe you are looking for