CJV4, WBS simulation version cost in COSS and COSP by cost element

Hi PS expert.  (-:
IN PS When we freeze a simulation version with CJV4,  (operative data to version), sap will create new object number in table VSCAUFV_CN for each network and VSPRPS_CN for each Wbs element related to the simulation Version.
In our environment, SAP will add record in COSS and COSP for the new object number for Network but NOT FOR THE WBS.
Is it standard to NOT record the cost in COSS and COSP for the simulation cost of the WBS (against the new object number?)
That mean we will able to see the simulation cost by cost element for network, but NOT FOR WBS element.
For the WBS, we only record the cost in RPSCO by cost category.
Is there a way to active (with an exit ..classu2026bapi) the recording of the cost of the WBS by simulation version in COSS and COSP
Thanks you very much for your help
Sophie

hi sophie,
create separate network for each wbs in project.  see if this can solve your issue.
vengaiah chowdary

Similar Messages

  • At what level are the records pooled in COSS and COSP Tables

    Dear All,
    I have a question for you. i wold like to know what is the criteria that is taken into consideration while arriving at the totals in the COSS and COSP Tables.
    What are the fields that must be similar for some line items to be pooled and shown as a total record in COSS Or COSP Tables.
    For Ex: If i have two records in COEP table, what are the fields that must be equall for them to be shown as one Record in COSS or COSP table.
    Best Regards
    Kumar.D

    Criteria for pooling in COSS/COSP is the following:-
    Ledger
    Object number
    Fiscal Year
    Value Type
    Version
    Cost Element
    CO subkey
    Bus.Transaction
    Partner Object
    Source Object
    Dr/Cr indicator
    Trans. Currency
    Period block
    should be same
    Regards
    Sach!n

  • Regarding tables coss and cosp

    Hi Experts,
    In table AUFK there is object number field against order and against that object number there are lot of entries in tables coss and cosp.
    I need to know from which transaction these entries get updated and also can we come to know from these entries in tables coss & cosp, whether the order is newly entered or changed or any other operation happen on that order??
    Thnx..

    I can explain the costing frame work behind the Production order /Internal order.
    For all the items and Item types (material, service, Employee, Variable items ) based on Production order/Internal order Objnr( Object number) Cost estimate number will be generated (KALNR) .
    B       Base Planning Object
    E       Internal Activity   
    F       External Activity   
    L       Subcontracting      
    M       Material            
    N       Service             
    P       Process (Manual)    
    T       Text Item           
    V       Variable Item
    then all the items will be posted against the OBJNR and KALNR.
    Create the costing component for each item type using the function module
    KKDI_OBJECTS_CREATE_FROM_RES
    CL_COST_ESTIMATE is the class behind all the costings.  for behind each item type different class will be there for costing.  using cost estimate object all the Items will be inserted ( INSERT_COMPONENT method is responsible) .
    after that  calculation will happen using the calculate method of cl_cost_estimate ,then save_temporarily
    finally cl_cost_estimate=>commit_all
    Once it is commited then CKIS , COSP, COSS data will be updated from the items..
    i hope it is very vague for you.

  • Controlling Business transaction field in COSS and COSP table

    Hi all,
    I am trying to understand the idea of the field business transaction in tables COSS and COSP (where as much as I understood are the line items in CO - please corect me if I am wrong). It seems logically that this field is connected somehow to the SAP transactions. Do you know where is this connection and how can I see it?
    I need to know which SAP transactions will get business transaction COIN for example. If you have some documentaion or explanation of how this works, it will be very useful to me.
    Thank you,
    Maria

    Hi Maria,
    When you run settlement for internal orders using KO88, the records are saved into COSS table with the Business transaction KOAO.
    Just for your understanding the meaning of the main CO tables:
    - COEP: this is the CO document line items table (the one that is searched when you run, for example, KSB1 or KOB1 report transactions);
    - COSS: this is the CO cost totals table for internal postings, that is, the postings done into CO module that is going to reflect on the same CO module;
    - COSP: this is the CO cost totals table for external postings, that is, the postings done into any module that is going to reflect on CO module.
    To complete what it had been explained: COIN means the postings done from any module to CO.
    I hope it helps you.
    Best Regards,
    Daniel

  • BAPI for COSS and COSP Table to Create and Update

    Hi,
    Is there a BAPI for COSS and COSP for creating and/or updating these tables?
    Thanks

    hi ,
    u dont have any bapis for updatign specific tables
    bapis are generally used for updating a transaction i mean number of tables
    where is the use of the tables u can search bapis in transaction bapi
    and where are the tables used i guess in fi/co so u can search under them
    regards
    afzal

  • Problem in retrieve data  in COSS and COSP from PBS using FM /pbs/select_in

    hi all i have problem in retrieving data from COSP and COSS tables from PBS using FM /pbs/select_into_table in this FM i couldn't find the tables if any body knows pls reply back with the Archiving object to be use and parameters to be used.

    That are controlling tables-
    Have you installed PBS for Controlling ?
    try http://www.pbs-bensheim.de/
    A.

  • How do I change Resource Cost Center only and retain historical cost center data?

    How would a Project Server Admin accommodate changes in the resource's cost center itself?
    For example, Ken (timesheet submitter) records Feb time in cost center C1, but then transfers to a new team, which is in cost center C2 on Mar 1st.
    When I change his cost center at the resource level, reporting indicates all of his previous C1 time as a resource under the C2 cost center, and all of his C1 time looks like it's incorrectly in C2.
    I am thinking about adding custom resource fields to track these changes, but it seems like a lot of extra work, if something already exists that I can use.
    Thanks,
    Marty

    Marty,
    AFAIK, there is no way to do this OOB as Resource Fields are not 'time-phased'.
    A 'possible' alternative, like you mentioned, could be be to use custom fields to track, the change (like Effective Date, Old Cost Center), and then somehow write a query to consider the old cost center between the dates. I have not tried this personally,
    just a thought.
    Cheers,
    Prasanna Adavi, Project MVP
    Blog:
      Podcast:
       Twitter:   
    LinkedIn:
      

  • Hello in which transactions do i get the data for tables COSS and COSP

    Hello i have these two tables. i need to know which transactions correspond to them .thx

    Hi Antish,
    try with transactions KOAO & KOAP
    Thanks,
    Syf

  • Integration of Simulation versions of APO & R/3

    Hi,
    I want to integrate simulation versions of APO & R/3 so that data can flow between both systems.  Is it possible?  How to do it?
    If the answer is possible, how to create simulation version in R/3 and to integrate with the simulation version of APO?
    Please reply,
    Regards,
    R. Senthil Mareeswaran.

    Hi Senthil,
    APO & R/3 Integration can only be done with active version that is version 000. Integration using simulation version is not possible.
    Regards,
    SB.

  • Reg:Simulation version key issue

    Hi,
    I am using simulation version key as SIM+++ .But as per document given below:-
    The valid version numbers for simulation version can be entered in Customizing.
    You can use the formatting characters + and *:
         + means exactly one character
          If you enter SIM+++ the maximum length of the version number is restricted to 6 characters.
    is a character string  of no defined length at the end of the version number (up to the maximum length of 12 characters).*
    If version numbers for simulations have been entered in Customizing, then you can only create versions that correspond with one of these entries
    but when i am creating Simulation version SIMAA3 then also system is accepting whereas as per above document + sign is for character and not for digit.
    So Kindly guide me in resolving this issue.
    With Regards
    Rohit Prakash

    Project Version is snapshot/photo of project, you cant change it. It is generally taken to record the exact project status at that point of time.
    Simulation version is used to simulate 'if then' conditions.Generally used during quotation phase or if you want see effect of particular event on project you can create simulation version see the effect and transfer back to operative or delete.
    Project Version is only for info purpose and cant be transfered anywhere. Simulation version can be transfered to operative project.
    1. http://help.sap.com/saphelp_erp60_sp/helpdata/en/d8/1fe8344d1d166be10000009b38f83b/frameset.htm
    2. http://help.sap.com/saphelp_erp60_sp/helpdata/en/0b/ba853488601e33e10000009b38f83b/frameset.htm
    Regards

  • Actual Cost on Simulation Version

    Hello
    I am creating simulation version thru CJV1. How do I plan and post actuals on that version ? I don't see that simulation version (proj defn) to do planning or to use it on PO in WBS drop down list.
    In short how do I simulation of cost on such proj versions. Once I transfer it to operative proj thru CJV4, I am able to do planning and post actual. What is the right way of using simulation versions?
    Thanks
    Sarang

    Ok got u. But then how do you paln costs on same i.e. commitment or activities labour cost etc
    Sarang

  • Planed costs on Simulation Version

    Where can I see the planed costs on Simulation?
    I have an escenario where the project is created as Simulation, and after this one is evaluated on duration and costs, the user transfer the simulation to an operative project, but I need to see the planed costs.

    Hi ,
    Go to trnsaction CNS41 Structure Overview report
    Press The Push button DB Profile
    Tick on Version data in Origin
    here u can select the simulation versions for which u want to see the Project info with differentiated colors
    by selection of Project planned cost field
    Rgds

  • Simulation version WBS element

    Good morning,
    We need to load for the 0WBS element,  the simulation version (PS
    version , not CO version).
    Could you help me?
    Thank you

    Hi,
    check out this sap help...
    http://help.sap.com/saphelp_nw04/helpdata/en/b4/60073c0057f057e10000000a114084/frameset.htm
    CJ40 - Project Cost Planning By project and wbs

  • Function modules to get wbs level budgets and activity level cost

    hai gurus can any one tell me the function modules or any other bapis to get the wbs level budgets and activity level costs
    thanx in advance
    afzal

    ok

  • Pro Tool Studio LE 7 upgrade... anyone knows where I can buy the upgrade version for this? and how much does it cost?

    I have a Mac Pro 2006 running on leopard and I need to upgrade my Pro Tool Studio LE 7 to 8 so it can work on Leopard.. anyone knows where I can buy the upgrade version for this? and how much does it cost?

    Upgrade to Pro Tools Studio LE 8: - http://shop.avid.com/store/product.do?product=288865113879120
    But it would be worth searching through the Updates to see if there is an update for Leopard, which it looks like there is: - http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=355241

Maybe you are looking for

  • Link Source reports in BIXI3.0 to Target report

    Hello Friends Please help me resolve this i will be grateful to all sdn friends if you can help me with this I have two reports 1. Trial Balance 2. Trial  based on OLAP BI Infocube universes. I want to Jump from Trial Balance to "Trial" Report by cli

  • Can I import photos from an old iPhoto library?

    Can I import photos from an old iPhoto library on an external hard drive to my current iPhoto library?  The icon on the hard drive appears greyed out when I try via Import.

  • Ale HR - FI

    Hi, I need to make a Ale from HR (Server A) to FI, PM, MM, SD, etc (Server B) in both ways. Please, do you have an idea of how to do it? What do you suggest me? Regards, Ruben.

  • How do you include the actual CLOB value as ASCII when writing XML?

    When using the XDK for PL/SQL ( creating XML from query ) and the table that you query has a CLOB column the value in the resulting XML document is written as: <column>(CLOB)</column> how do you get the api to write the actual CLOB data?

  • Photo Podcasting in Quicktime

    Hi, WHat is the best way to podcast photos in Quicktime? Should it be done in Final Cut and then exported, or done in Quicktime. I don't see much that's good about the Pro version, and wanted fade in's for images, plus audio tracks. Any help apprecia