CK-7W Beeps

HI i have installed a ck-7w car kit into a mazda 6 . there is a loud beep coming from the phone kit speaker . the beeps still happen even if there in no phone in the car. i have tried both the bluetooth connection and the cadle with data cable but the beeps are still the same.the box has been changed three times and every thing else from the antenna to the wiring changed once.
any one any ideas
im puzzled

The car kit is trying to establish a Bluetooth connection, the bleep is to let you know that it has failed to pair a device. Do you have a cradle?, because my own kit has just started to bleep even when the phone is in the cradle, the fault is that the cradle is not making full connection to tell the brain that it is connected via pop port.
If you have had the brain changed 3 times then i would get a second opinion from a different engineer, i have never had to go back to one person 3 times, this could be a loose wire or a dodgy cradle.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Similar Messages

Trying to do Disk Repair but get beeping.

I need to do a Disk Repair through the Disk Utility function off my Snow Leopard Installation disc. However, once my Macbook Pro restarts, it won't take me to the OSX installation window. Instead, I remain stuck at the startup grey Apple screen, and get 3 beeps repeatedly. These beeps have only happened when I try to open the Installation disc. It has never happened to me when I turn on my computer normally without the installation disc.
I've also noticed that my laptop will randomly freeze sometimes with a spinning cursor when I barely even have an internet window open, no other applications running. I don't know if this problem is related to the issue above.
This is a 2011 model. Don't know if these specs will help at all (total tech newb here).
Processor: 2.2 GHz Intel Core i7
Memory: 4GB 1333 MHz DDR3
Any suggestions are greatly appreciated!

1) 3 long tones, 3 short tones, 3 long tones = Firmware restoration from CD in process.
2) 3 successive tones, a 5-second pause, 3 successive tones = RAM does not pass data integrity check
Which one?

What's wrong with my MacBook? It's flickering and beeps.

I bought my MacBook Pro 13" in October 2012. It worked fine and then on December 25 I was using it and a rainbow on vertical stripes started flickering and took over the screen so I had to hold down the power button and shut it down. I took it to the Genius Bar and she did nothing for me. About a month ago the screen started to flicker and was completely distorted. I took it in and they sent it to Austin where they reset the RAM. I got it back and yesterday I pressed the power button and the screen stayed black and it beeped three times then paused, beeped three times, paused, and continued in this pattern. And later last night I tried to turn it on again and it turned on but after about five minutes it flickered and the screen was completely distorted. So I forced shut down. The same thing happened again this morning with it working for about 5 minutes then distorting. This is annoying because I've taken it in twice and it continuously have the same problem. The only thing I have downloaded is Google Chrome. Before they sent it in and reset the RAM and to factory version I had Sims 3 on it but when I got it back Sims 3 wasn't on it because I was reset to factory settings, so Sims couldn't be causing it.

beeps http://support.apple.com/kb/HT1547
Bad RAM can be fine for awhile, then not be fine.
You can run the Apple Hardware Test yourself
Reboot holding the D key
http://support.apple.com/kb/ht1509
Not a definitive test, but will give you more information.
Genius reservation http://www.apple.com/retail/geniusbar/
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

K9N Platinum SLI beep codes?

Upgraded my machine with:
K9N Platinum SLI
AMD X2 4600+
2 Gigs of Corsair DDR2 4-4-4-12
MSI 7900GT
BFG 650 watt psu
My computer was running fine at first, but now I'm getting some weird stuff.
The machine will run like a champ for like 10min and then it will just turn off, as if the power went out. But I just bought the power supply so I don't think that is the problem.
When I try to turn the computer back on it makes 2 fast beeps and then 8 slower beeps and wont post any video.
I tried removing all my other components, reseting the bios, reseating all my cards/cables/memory, replaced the memory and I couldn't get it to boot so I left it alone. Came back in an hour and it booted right up. But after 10 min again... same problem.
Any idea what those 8 beeps mean? And yes I tried using search T_T

Quote from: boomstick1968 on 25-September-06, 20:00:12
Ok, my start up beeps have changed. At first, it was two high pitched beeps and then one low, now, for some reason, and I've made no changes, it's a high-low-high-low. What do these different beeps mean? Everything seems to running ok, but I'd like to know what my computer is doing.
Hi Folks, my first post here so excuse any stupid questions
Anyway, I have just built a new system almost the same as the last posters. It runs perfectly and was the most trouble free system I have ever built. But one thing bothers the heck out of me. As with the last posters system everytime it starts it gives 2 fast high beeps then one low. All fast. This seems a departure from the normal one beep most systems give at start to indicate all is well. So is this normal for this board? Anyone else have this? I have tested absolutely everything and everything is fine. The system is super stable and never does anything silly. Just these different beeps have me confused. Inclined to leave well enough alone anyway. Thanks

Iphone 6 call waiting beep not working

When I am already on a telephone call, and a second call comes in, the caller is not hearing a beep indicating that I am already on the phone. All 3 phones involved are Iphones. Any ideas on how to fix this? Thanks

The caller will hear a tone at the end of the "ring" indicating the person being called is already on the phone. This only works if both callers are Verizon users - so if your callers are on another carrier, they will not hear the tone. Also, if you use ringback tones, they hear your chosen music, but no tones.
By any chance, do you or any of your callers have or use the Advanced Calling feature? I have no idea if this would change anything, but it does seem to affect some other calling features. I'm just trying to come up with ideas as to why your callers would not hear the tone.

I dropped my computer, it made the 3-beep "RAM is screwed" noises, but it seems to be working fine now. What should I do?

I'm bad at computers so be patient with me ... I dropped my 2.5 year old MacBook Pro from about waist height onto a concrete floor (I know!). Worst feeling in the world, especially after I had the hard drive replaced a couple weeks ago. Now the case has a little dent on the corner but no other visible damage. After I dropped it it started doing the "beep beep beep -- pause -- beep beep beep" noise, which after some googling I see is to do with something wrong with the RAM. I powered off and restarted it, and after the restart it seems to have nothing wrong with it; turned on fine, screen is fine, no error messages, no slower than usual. I checked the memory stuff in System Report and it says both sticks are OK. I also ran the "verify disk" thing to check my hard drive and got no errors.
Can somebody tell me what the odds are of this computer surviving for the next couple months? I would take it to an Apple store, but this is complicated by me being in Rwanda, which means getting my computer fixed or even looked at is highly unlikely. I've got a friend coming to visit in a week and she could just buy me a new computer and bring it over, but I really, really don't want to have to buy a new one if this one's going to work. On the other hand, I'm terrified that this one is going to up and die on me before I get back to the US in August. Still, it seems to be working OK -- but is it going to die out of nowhere? Would you buy a new computer, if it were you? Does anybody have any ideas about what might happen to this one over the next few weeks? Thanks!

venicespent,
Boot into your Mavericks Recovery partition by hold down the command and R keys whilst booting. You'll see a screen that looks like this:
Click on the Disk Utility item to open Disk Utility. You should see your boot drive (usually named "Macintosh HD" unless you've changed it) in the column on the left of the screen. Select your boot partition and click on the "Verify" button. Let your Mac do it's thing - if you get green text telling you that everything seems to be OK, then your disk should not be damaged. If, however, you get red text telling you that the disk needs to be repaired, click on the "Repair" button. If the disk can be repaired, you should be good to go. If the disk cannot be repaired then the drive is damaged.
But before you do anything, make certain that you have backups!!!
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display

On connecting to itunes or charger iPhone 5 beeping continously and I am unable see anything on display. In itunes I can see everything when I connect to computer. What could be the issue with my display and how to fix it.

My iphone power button is not working so today I decided to replace it, on opening few screws I was unable to continue as I was not able to open all the screws on the iphone. So far I had managed to disconnect display panel & battery only. So I decided to not to replace button myself and I closed it. After closing I am able to see iphone 5 connected to itunes and I can see all my data, however it continuesly beeping when connected to charger or computer. Also I do not see anything on display. Before opening the iphone everything was working fine now I can't see anything on screen.
I do not see any hardware demage or anything like that, can anyone suggest what could be the problem?
Please help

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Everything that cames in the box is included in the 1year warranty, unfortunately you're just outside of that warranty. Regardless, if the above troubleshooting does not resolve, take the device to Apple and they can determine if the issue is the device, the charger(s) or something else.

MBP 15" early 2011 (MacBookPro8,2) - freeze and 3 beeps after normal boot

Good day.
Month ago I upgraded memory in my MBP early 2011. I bought 2 banks of 4GB Hynix 1333 Mhz(MBP had 2x2GB Hynix banks), installed them and got the first hard freeze with 3 beeps right on the login screen. Since then I got somethink like 15-20 freezes with intervals from 3-4 hours to 1 week and total silence in logs and diagnostic reports.
Note: it boots fine, and freeze occurs during work.
I'm sure it's not a RAM issue because it was tested countless times with AHT, Rember, memtest runned from single user boot, even ASD — all tests passed.
I tried to reproduce the error using Prime95 stress tests, but with no luck — MBP successfully passed 6 hours stress test under 100% CPU and RAM load.
Today MBP freezed 2 times with locked screen and without user activity. Any suggestions?
Additional info:
dmesg - https://gist.github.com/7d3804d11bef38090345
latest log entries right before freeze - https://gist.github.com/c66eaa8c3b08c08c6656
P.S. I'm from Russia, so we don't have AppleCare, only AASPs without needed replacement parts. Also they asks for valid proof of purchase and don't care about Apple ID, serials and stuff.

yumitsu,
3 beeps MEANS its a RAM problem or RAM related problem. There is no doubt about this. Make sure RAM is seated properly. Reseat it if necessary. Also make sure that the DIMM slots don't feel loose as a slight jolt is probably enough to dislodge RAM and make your machine expererience these issues.
Have you tried putting back the original 2 x 2GB RAM that originally shipped with your machine back? If everything starts working normally with the original RAM, then you isolated the issue to the 2 x 4GB Hynix RAM.

0.6, with same problem as i am during installation continues beep on mac which unusual and it tooks longer time and didnt reboot the system. kindly help

Continue beep while installing leopard, kindly help to fix this problem and it took many hours only gray screen and apple logo it didn't proceed the reboot

More information required as Allan posted.
Beeping match any of these?
Startup Tones

Tecra S1 boots correctly but does not work properly and has BIOS error beeps

Toshiba S1 has started to crash regularly after a certain period of use.
Sometimes: BIOS error beeps: Short-short-long.
Sometimes: Bluescreen of reduced screen size/reduced resolution.
Sometimes: Just crashes (frozen) and has to be shut off manually.
As Toshiba uses its own BIOS, does anyone know what these beep sounds mean or can provide support?
Is it a hardware / connection problem between graphic card and monitor or is it a memory error?

Hi,
did you tried to make a memory test? If not, I would suggest you to make it. For such tests I would prefer using "memtest86" (www.memtest86.com)
Otherwise I would assume that your mainboard is malfunctioning and you will have to bring your machine to an local ASP.
If you need help finding an ASP, here is a good site:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?subs=tais
Good luck
Greets

Picture Included. Mid 2012 13 inch Macbook Pro green/purple lines on screen. Freezes. Sometimes 3 beeps.

Alright I have a Mid 2012 13 inch Macbook Pro purchased in June 2012. For about the last month, I have this issue where as I am using it random colored lines will show up on the screen (lines usually green, purple, but occasionally the issue occurs while booting and lines are black on white background). As soon as the lines appear, everything freezes. Sometimes the computer automatically reboots. Other times, it will just turn off and start beeping 3 times in a row. AT first, I thought this may be a video card error because it happened a lot when I was watching videos. However, it also happens randomly when I am just using safari/chrome with no other programs runnings. The most annoying part of this issue is that it is completely random. Computer won't act up for maybe 2 days straight during all activities (videos, surfing the web, etc). Then I will have a day where the problem is consistent.
Also, although I think this is just a correlation, all problems started after upgrading to Yosemite.
Picture below:
Does anyone else with a Macbook Pro (especially 2012) have this issue? These two discussions seem to be describing this very situation:
Screen froze, purple lines, three beeps. Help!
Macbook Pro screen glitches, 3 beeps, NOT THE RAM

thanks alex. I'm going to the genius bar later this week for them to get a look at the issue.
in the meantime, do you have any idea why the problem occurs when I apply a little pressure to the bottom of the computer (under the command screen). here is a video of the situation: https://www.youtube.com/watch?v=88C34bHZAd8&feature=youtu.be
also, i found this thread describing my exact situation: Field of vertical lines all over Macbook Pro screen? (+ freezes, beeps)
do you have any idea of a solution from reading that?

Mid 2012 13" i5 Macbook Pro Screen Freeze, Shut Down, 3 Beeps!

Hi guys, my macbook recently started freezing and then shutting down giving 3 beeps afterward. I know 3 beeps is traditionally RAM, but here is a picture of my screen when it freezes. Do you think its GPU and logic board problem or is it really the RAM? Maybe something else? Anyways would love some feedback, going to take it in to the Geek Squad as it still should be covered with a 1 year warranty since I purchased it in February of this year.

I will be taking it in next week, just wanted to have an idea of what it is. This is my second Macbook pro, my first I have had to get fixed 6 or 7 times in a couple years but Apple and Bestbuy wouldn't replace it, even though the first problem happened during the 1 year warranty... After the last time we had it fixed they finally gave me a big discount on another one, but now this one is having problems... I thought MacBooks were supposed to be very reliable! I am not hard on them at all, never been dropped once, not even a scratch on them. I don't get it. Would still like to hear some more thoughts, especially if you have seen a screen like this one! Thanks!

Mid 2010 MacBook pro gray screen beeps no startup

Hello,
My mid 2010 MacBook pro will not startup. What I get is the startup chimes with white or gray screen. Then some beeping and clicking starts. Will not boot remotely from FireWire drive.
I'm thinking it might be ram based on what I have read so far as opposed to a hard drive crash.
Any ideas?

The number of beeps should tell you what the problem is.
http://support.apple.com/kb/HT1547

Mid 2011 mbp i7 with a SSD has problems, including grey screen/blue screen/beeping/freezing when I stream live video (i.e. watch espn or time warner cable) Help? Ideas?

Recently my Macbook Pro (June 2011, i7, 8gb RAM, 512gb SSD, AMD Radeon 6750, Mountain Lion - since July - currently 10.8.2) has been presenting me with an array of problems, usually initiated when I am streaming live video. I was streaming Time Warner Cable on 12/9 and it gave me what looked like the blue screen of death. It started up after about five attempts that time. The other day, after about a week of not using the computer, it wouldn't boot past the grey screen. I (option) started it and it gave me two boot choices, the regular HD and a "10.8 restore" option. The HD gave me the grey screen and the restore option gave me the dark blue screen. I reset PRAM and that didn't work. After a force (x) start it worked. Today, I was using "Watch ESPN" and the screen froze and the computer did some kind of repeating RAM beep or something. I rebooted and it started up fine. I'm not watching any videos anymore, but this is a problem since the primary purpose for my mbp is video editing. I'm still under AppleCare but I find more solid answers in the forums or at least better questions for the AppleCare people.
Anybody have similar experiences, or a solid idea of what the heck has happened to my machine?

I'm not really sure what method that person was talking about. I just read he had a successful install so I posted it.
But I'll hazard a guess
1. copy your entire drive to a backup drive
2. boot into that drive and test it out - make sure its a flawless backup, it works, and the hard drive has no problems
3. eject that drive, disconnect it and reboot into the leopard install dvd
4. erase your main hard drive using disc utilities on the leopard install dvd -- you've made a backup, made sure that backup was good, and disconnected it so it's currently safely disconnected from the leopard install you're about to do. Also, on the hard drive you're erasing and installing leopard on to, many people recommend "Zeroing" it as well as erasing it. That option is part of the erase function in disc utilities on the leopard install disc.
5. do a clean install of leopard
6. follow step 4 from that original post exactly as that person described to do.
7. read the rest of what they said
That's pretty much it. With the backup/erase/clean install/import/ you pretty much get everything you need exactly the way you want it with very few things missing -- and you've done this over a clean install. Plus that poster did mention that you can select what you want to import from your backup hard drive.
It sounds like its a "clean install" method that gives you control via "import from machine" option in the installer. Control over what parts of your "old mac" you want to import into your "new leopard mac".
Hopefully that helps. It sounds more involved, but its actually pretty quick and provides you with a perfectly save backup in case anything goes wrong with the leopard install.

865Pe Neo2-V: Froze- no display- no beep. mb or cpu problem???

motherboard: 865Pe Neo2-V
cpu: intel p4 3.2ghz
memory: kingston 512x2
vga: ati radeon 850xt
The problem i'm having is this...
Everything was working fine and all of a sudden my computer froze.
So I tried ctrl+alt+del but didn't work so i pressed the reset button.
I was waiting for it to reboot, but i hear the fans running but no display.
So i thought maybe the monitor was the problem but
i tested it with a different computer and it's fine. and the hard drive too.
What i noticed is that after the computer starts, I don't hear the beep (once) that it's running ok and
proceeds with the actual booting with hard drive.
Then i thought it's the vga, and tested, but it's working ok.
I think it's between motherboard and the cpu...
So i decided to test the beeps, and I ran the comp without any memory, it didn't beep.
Tried without the cpu, didn't beep.
Could this be the motherboard problem? or the CPU?
If so (whichever one), why would this happen??
For anyone who knows this, please help me out.
Thank you for reading..

Quote from: infiniteflow on 01-March-07, 01:06:17
any help?
anyone?
re-seat CPU,(ensure its mounted well, check it for damaged CPU pins, test it into another machine if its possible) apply new thermal paste(but not too much), clear CPU socket from any dust around. check all power cables. try barabone setup.(take board out of case too)
test with one of memory stick only in DIMM slot close to CPU socket, then Clear CMOS (ensure power cord are not connected to the PSU before proceed with Clear CMOS.)
re-test.
if no go test it with different and better PSU. good PSU suggestion can be found here and above:
https://forum-en.msi.com/index.php?topic=105635.msg783120#msg783120
if still no go, found a way to test CPU somewhere else to ensure its work. if CPU works must be failure board then.

CK-7W Beeps

Similar Messages

Maybe you are looking for